Create an image of a gray-scale image Pseudo-couleur

Similar Questions

• How can I stop the image profile of changing from RGB to gray scale?

  

  It is the result of a copy of a TIFF image, created with a Sony Alpha 7R.  Plug change RGB to gray scale.  Occurs only with the image of Sony.

  The title of the help, I checked the update and Adobe informs me that I'm updating

• How to transfer a table OR scop 2D in a gray-scale image and save it

  Hi all

  I have acquired a 2D array and that you want to transfer into an image in grey scale (12 bits) and save it to my hard drive but I don't know how to do it.

  I can use the graph of the intensity to show the 2Darray in gray-scale image, but intensity graph.vi cannot save the image in real time.

  Thank you.

  The 24 bits is a color image with 8 bits per channel of color per pixel (interlaced, if I remember correctly).  It is not a 24-bit gray level, so I don't think it will work for you.  I think that the library IMAQ (an add-on LabVIEW) will manage to 16-bit gray scale, if you can get a copy.

  Native LabVIEW to work around the problem, you could also split your image into two images of 8 bits, with one image that represents the high bytes, the other down.  You could then combine them when you do the analysis, if your analysis program is capable of that.

• My images are upside and gray scale. On another computer, it loads fine - any suggestions?

  My images are upside and gray scale. On another computer, it loads fine - any suggestions?

  Thanks for the info-2 restarts later and it works now. If it happens again, I'll try a more complex approach.

  Thank you!

• NB100 - cannot create the image of the main partition

  Hello.

  I am a Toshina NB100 user and I am happy with my netbook, but I have a problem.

  I always work with partition on my hard drive. 20GB primary partition and the secondary partition have 100 GB.
  I have the windows xp operating system on the primary partition, and on the secondary partition I music, photos, programs, games, etc.

  When I want to created an image of my main partition with Acronis partition magic or with other programs the NB1000 do not recognize the hard drive, the machime write a caption "I can not find the HD. I thing that the problem is the fault of the Bios.

  Anyone know of this problem? or maybe someone could do?

  Hello

  I doubt that it is a BIOS problem.

  The fact is that the laptop uses the SATA HDD controller and your imaging software cannot recognize the HARD drive due to lack of SATA drivers.

  The Intel Matrix Storage Manager package located on the Intel page contains the necessary files to the SATA.

  Good bye

• Satellite L650: Created new Image but the FN buttons do not work

  In the past, I created the image of my good installation with all updates and my installed programs.
  After that once again L650 began to play up, I rebooted it and now my fn keys do not work and Health monitor does not start, but displays an error message "unable to get the type of bios.

  Don't know what else does not work here.
  RELOADED according to factory instructions and everything is OK, but now I have to reinstall my programs and updates.
  What a pain. Anyone know why "my image" has problems?

  This machine had 2 hard drives replaced, has graphic problems with some 3d foot crossings and freezes at the first chance with the mouse not working not and then the black screen. Still under guarantee.
  What nonsense.

  I'll charge as directed by the plant and see when it will pack up again so I can get it repair.
  Unfortunately, problems are random and difficult to prove.
  This is computer/laptop worst I've ever had - very disappointed.

  Hello

  Fn keys are controlled by VAP and Flash memory card Support utility.

  In most cases, it allows to restart Flash Cards Support Utility tool.

  You can find it in the * all programs-> Toshiba-> restart Flash Card Support *.

  If this does not work, a reinstallation of VAP and Flash memory card Support utility should work

  Welcome them

• How to create an image of a Macbook Pro with El Capitan

  I want to create an image of a Macbook Pro with OS El Capitan and store it on an external. In short, it would be a disk image and I can use it for another like for like reimage.

  One option is Carbon Copy Cloner: https://bombich.com/

• How to create the image that was stored on the HARD drive

  Hello

  When I fixed my windows, I chose "Restore Factory Setting" options.
  This happens to reformat my hard drive and I lose the "TOSHIBA HDD Recovery" image.

  Is it possible to create this image again?

  Thanks in advance for your help.

  Hello

  The use of the Toshiba HDD image would format the HARD drive, but should not remove the Toshiba HDD image files that are stored on the second partition!
  That's why I put t know why you said you lost the image of Toshiba HDD.
  That is a little strange.

  On the other hand, you can try to create the recovery disk using tool of preinstalled Toshiba Toshiba recovery disc Creator called.
  This tool helps you to create the recovery disk using Toshiba image files stored on the second partition.
  I think you should try this.

  See you soon

• Satellite L500 - Create System Image - errors on the media

  The Satellite L500 series, I tried 3 times to create an image of C: System with the help of Windows 7, but each time on checking image files created, I got the message "backup Windows found errors on the media while saving a top backup & can not be used for additional backups.

  I tried in Windows to restore from this DVD, but he acknowledged even the backup DVD Win.

  Discs used: Sony DVD - R 16 x, & twice on DVD + RW (4 x), used straight out of the box (no formatting by me).

  Any ideas what I am doing wrong, or if b some into conflict with programs that I use?

  In my opinion, this question is for Microsoft. As far as I know it is the functionality of Windows and the laptop manufacturer has not much to do with it.
  Can you create upward on the second partition of HARD drive or even on external HARD drive?

• Satellite L350-170: creating the image of the partition backup system

  New here so first of all, Hello to all.

  Need some advice if possible please.
  I just got a new laptop L350-170 with Windows Vista Home Premium.
  I went thro' the installation process and created with the program toshiba recovery disks but also make the thro' the post.

  What I want to do now is create an image of the full backup ' c' drive now that I have installed additional programs and adjust settings to get the laptop how I want it.

  I've tried acronis true image, but laptop won't boot from the restore cd, even tho ' cd/dvd is set in the bios as "first boot.
  Says it can't find the "boot partition" and assume that it is something with the toshiba restore program not be circumvented.

  Is there a 'ghost' type program that will allow me to create an image, and then start the disk in order to restore everything from the created image and therefore not lose everything I installed carefully?

  I suppose that, if I try to use the toshiba program once again, it will only reproduce the original installation.
  I hope someone can advise.

  TIA

  Hello!

  The Toshiba recovery disc sets only the laptop back to the factory settings. It s not a program backup like Acronis, but with the recovery disc you have installation of Windows with all the drivers and tools of Toshiba.

  What version of Acronis True Image do you use? I use version 11 and I have no problem on my laptops and PCs. It works perfectly.
  Maybe you should do a update.

  Have you set the SATA mode in the BIOS to AHCI or compatible? Maybe you need a driver SATA when you have defined it AHCI, but I think in its new version of Acronis you t need a n.

  I hope I could help a bit and if you have problems, make me know it.

  Good bye

• Cannot create disk image writable, case-sensitive on El Capitan

  Hi all

  It is my first time posting, so bear with me, pls if this seems to be a stupid question.

  I tried to create a HFS disk image + case-sensitive (logged) on my MacBook (early 2015 model. OSX El Capitan 10.11.2).

  The goal is to build Android AOSPS (according to the website of the AOSPS, case-sensitive file system is required).

  But so far, I was not able to successfully create a desired image (sensitive to case AND write).

  With "Disk utility", I was able to create an image in writing (i.e. when mounted, the file system is read/write) but not case sensitive.

  Why is "Disk utility" unable to do so because it provides even an option for "logging case-sensitive HFS +?

  Then I tried to use "hdiutil create" tool command-line (based on the results of online research), which has succeeded in creating case-sensitive, but read-only images (i.e. when mounted, file system is read-only).

  I tried different combinations of "-format ' & '-fs ' options, but nothing seems to work so far.

  With the help of 'hdiutil convert' does not help.

  All opinions are appreciated.

  Thanks in advance!

  This is a bug. The solution is to clear the disk image mounted in disk utility, choose HFS case-sensitive like the format.

• Create the image with black and white patterns

  Hello

  With the attached VI I am able to create an image that is completely black (or white or any color according to values in the color palette). See picture1.

  Is it possible to create an image as photo 2 and photo 3 or any other form which consists of black and white patterns? I need an image with black and white areas that a camera can recognize.

  Thanks for any help.

  
  

• Pavilion dv2 laptop: how to drive to create an Image for Vista?

  Due to d/l & updated Vista installation problems, I decided to use my HP recovery disks to restore my laptop as long as you plant. It seemed like the most logical approach to carry out several tasks, such as deleting a 2nd user & general cleaning of the data files, etc. I bought this particular computer (way back when) mainly because he was physically small enough to fit in my purse backpack for use when I travel abroad (to download, review & backup images). I should have more a thorough investigation of speed, memory, etc. before you buy, but that's water under the bridge.

  Vista reloaded without problems, except that it took a few hours of babysitting, because I had never done this before and don't know when / if my contribution may be necessary.

  In any case, because of the time needed, I thought I would create system images at different stages along this restore process... as having been shipped from the factory. After installing all the updates of Windows; After the installation of "programmes" (PhotoshopCS6 & Microsoft Office); etc. Recently for the 1st time I went through the process imaging system (creation, does not) on my Windows7 desktop.

  I was surprised to learn that the imagery of the system is not integrated with Vista. Told me 3rd party software is necessary. My needs are simple: I would like to copy (mirror image) physical disk 1 (partitioned C & D) & restore & up & works quickly, if necessary.

  I also have a laptop XP even more old, used only for the scanning of slides. It's not really a priority, but it would be great if I could find some imaging software that will run on XP.

  I Googled, but I'm really not qualified to judge what I found. Excellent sound even from those that are free. Price is of course a matter of concern because it is (I hope) of little-used software.

  I use the second copy to synchronize my data on my desktop backups & will probably start using it on the laptop too.

  Does anyone have recommendations for imaging system software?

  Thank you

  Macrium has worked very well for me and others I suggested. Windows XP 7.Haven't yet tested on Windows 8. On my list of things to do this weekend.

  You can create a bootable cd to boot from and to restore the Image even on a startup hard disk no. I use a drive external hard usb for images and it is generally fast enough to restore an image.

  The other two, that I mentioned have been recommended as works fine as well - I have just haven't tried because I use Macrium since 5-6 years. I love him so much although I bought the paid version for a laptop to test, but the free version does almost as well, and I use it on other computers in the House. If it does not suit your needs, one of the other two must.

• How to create an image system to the command prompt?

  I need to create an image of 'system' and I can't have accdess Wizard "backup and restore".

  Hi princesscontino,

  Thanks for the question.

  (1) what exactly happens when you try to access Wizard backup?

  (2) there was recent changes made to the computer before the show?

  (3) you have other programs of backup of other third-party backup programs?

  You can configure Windows backup to run any way you want and also to create a task in Task Scheduler to run the weekly wbadmin command to create the system image. For the sup of wbadmin commands, see http://technet.microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  You must run wbadmin from an elevated command prompt. (To open a command prompt, click Start, right click Guest and then click Run as administrator.

  "Wbadmin" command line utility and the utility is available only in Windows Vista Business, Enterprise and Ultimate editions and not in the Home Basic or Home Premium editions.

  You can also check: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Cannot create the image of the system due to an internal error

  Widows 7 cannot create an image system due to an internal error.

  What should do?

  Original title: the system image

  Hello

  Please contact Microsoft Community.

  I understand that you can not create the system image.

  I will definitely help you with this.

  What is the exact error of the internet you found?

  I suggest that you go through the links below:

  Refer to the suggestion given by Shubham Chaubey said may 17, 2016:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/unable-to-create-a-system-image/1f1011e6-468d-4AE1-99bd-c9be27677b41

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.