NB100 - cannot create the image of the main partition

Hello.

I am a Toshina NB100 user and I am happy with my netbook, but I have a problem.

I always work with partition on my hard drive. 20GB primary partition and the secondary partition have 100 GB.
I have the windows xp operating system on the primary partition, and on the secondary partition I music, photos, programs, games, etc.

When I want to created an image of my main partition with Acronis partition magic or with other programs the NB1000 do not recognize the hard drive, the machime write a caption "I can not find the HD. I thing that the problem is the fault of the Bios.

Anyone know of this problem? or maybe someone could do?

Hello

I doubt that it is a BIOS problem.

The fact is that the laptop uses the SATA HDD controller and your imaging software cannot recognize the HARD drive due to lack of SATA drivers.

The Intel Matrix Storage Manager package located on the Intel page contains the necessary files to the SATA.

Good bye

Tags: Toshiba

Similar Questions

Why cannot create the table partitioned successfully?

SQL> create table hr.gps_log_his
(id number,
name varchar2(10),
time date)
tablespace ts_log_his
PARTITION BY RANGE (TIME)
(PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')),
PARTITION udp_part09110708 VALUES LESS THAN (TO_DATE('09110709','yymmddhh24')),
PARTITION udp_part09110709 VALUES LESS THAN (TO_DATE('09110710','yymmddhh24')),
PARTITION udp_part09110710 VALUES LESS THAN (maxvalue)
);

(PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')),
Error on line 7: 
ORA-14120: DATE columns did not specify the complete partitioning limits.

The detailed error message is as follows:

ORA-14120: incompletely specified partition bound for a DATE column

Cause: An attempt was made to use a date expression whose format does not fully
(i.e. day, month, and year (including century)) specify a date as a partition bound
for a DATE column. The format may have been specified explicitly (using TO_DATE()
function) or implicitly (NLS_DATE_FORMAT).

Action: Ensure that date format used in a partition bound for a DATE column supports
complete specification of a date (i.e. day, month, and year (including century)). If
NLS_DATE_FORMAT does not support complete (i.e. including the century) specification
of the year, use TO_DATE() (e.g. TO_DATE('01-01-1999', 'MM-DD-YYYY') to fully
express the desired date.

Action: Change to_date('09110708','yymmddhh24') to
to_date('2009110708','yyyymmddhh24')

SanDisk extreme pro 128 GB cannot create the NTFS partition

Hello
I have a sandisk extreme pro 128 GB usb and I try to format it to NTFS in windows and it is impossible.
The only way I success for formatting on my MAC but the NTFS partition is not visible in Windows...
Use NTFS or HFS partition without problems, but on Windows the button does not work on my MAC and can...
Does anyone have a solution for me?

PS: I try windows XP, 7 or 8.1 nothing works...
Windows see 2 partitions on my key, but cannot format.

I just fix myself... about here was a good idea LoL

So my problem was when I format the key the first time I use my MAC, and by default the MAC use GUID partition to format the key and on Windows, we should use MBR partition.

Then when I format the USB on my MAC using disk utility, on the score of "variants" tab change when to create an NTFS partition MBR (instead of default GUID) partition

After this, format the key and that's it!

Its working fine now, I'm happy with this beautiful, design USB by Sandisk ;-)

Cannot create the 2nd partition

OS x 10.8.5

attempted to create a 2nd partition for El Capitan

Started in recovery partition

open disk utility

Click on the (+) sign to create a new partition

partitioning began

says the disk that shrink

crashed - had to force reboot

Started in single-user mode

Run fsck - fy

disc repaired

I tried partitioning again

After a long time, a message says that it na not create partition

of course now I have even more afraid of putting at level m...

is there something wrong with my HARD drive? If she wrote on the site of data?

(OS X 10.8 was a clean install after a failed upgrade)

in any case, is it possible to divide this drive? (clean install of El Cap would be nice but is not worth it because it might be too slow for me - early 2009 iMac)

How much free disk space do you have?

Cannot create the image of the system due to an internal error

Widows 7 cannot create an image system due to an internal error.

What should do?

Original title: the system image

Hello

Please contact Microsoft Community.

I understand that you can not create the system image.

I will definitely help you with this.

What is the exact error of the internet you found?

I suggest that you go through the links below:

Refer to the suggestion given by Shubham Chaubey said may 17, 2016:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/unable-to-create-a-system-image/1f1011e6-468d-4AE1-99bd-c9be27677b41

I hope this helps. Please post back with the State of the question and we will be happy to help you further.

Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

Original title: cannot create the Image of the system or system repair disc

I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.) Very frustrating...

Hi iamkira,

This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

Let us know if that helps.

Cannot create the vCloud Director VDC

Hi all
Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.
Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance. Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)
Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

" In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.
I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.
also attached the logs in the images below.
I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.
Any help to point me in the right direction will be appreciated.
I will be happy to provide you with newspapers if necessary.
Thank you
Ibrahim

I was not talking about data warehouses. I refer to the view in the vSphere Client.

Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

vCloud produces an error because of something that happens in vCenter.

Application of metadata are not available. Cannot create the grid

Hello
I use the standalone 11.1.1.3 HFM. When I tried to open the gates of existing data through the workspace, I receive the error message that "Application metadata are not available." Cannot create the grid '. Please could you help me solve this problem.

Thank you
Michel K

Hello

I'm not sure what you mean, but if you're not comfortable with these tasks, you may have to get a consultant.

The main steps are:
1. Connect to the source application and extract security tasks > extract tasks > excerpt from security.
2. Save the .sec file in your office
3. Connect to the new application and load the .sec since tasks file > load task > Security load.
Kind regards

Thanos

ColdFusion 10 - cannot create the database

I think that this error has to do with permissions, but I'm not sure. I'm not under personal service accounts to run IIS 7.5 or Coldfusion. There is some dirt on my server and Setup:

Server product	ColdFusion
Version	ColdFusion 10,282913
Edition	Developer
Operating system	Windows Server 2008 R2
OS version	6.1
Update level	/C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
Version of the Adobe driver	4.1 (build 0001)

Details of the JVM

Java version

1.6.0_29

History of this server:

A installed version 9.0.1. Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final. Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage. I then rebooted and again installed IIS and WAS. The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.

After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2. Web server here on out stuff is practically install stock.

I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.

Error just after the attempt to create the data source:

Connection verification failed for data source: andHalt

org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to

Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action

java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

at java.lang.Thread.run(Thread.java:662)

Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

... 13 more

Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

... more than 10

Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

at java.security.AccessController.doPrivileged (Native Method)

at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

... more than 10

= launch nested exception, level (1) =.

java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.