Create and insert a variable
Hello
I work with Captivate v4 and I want to create a passage and do not pop up message fonts/colors of my choice on the quiz results page.
The success message appears only if the learner has scored 80% + and the failure message with the option to retake the test appears only if the learner has scored at least 80%.
I'd appreciate any help and advice on how to do... I did it before, but for the life of me I cannt repeat.
Thank you, if everything is fine.
Noel
Hi Noel,
You want appear them immediately when the score slide appears?
If Yes: create two legends, one for the neck and the other for the failure of messages and set invisible (in the Properties dialog box).
Create a tip action, a condition where you can use one of the cpInfoPercentage of cpQuizInfoPointsScored or system variables to see one of these two legends. You can trigger this action by entering the score slide.
Lilybiri
Tags: Adobe Captivate
Similar Questions
-
Creating and reading a variable of several scripts
I'm creating a series of scripts to our helpdesk and one of the things we're trying to do is play critical for users when troubleshooting connects to the system before being queued. However, we want to be able for that turn on or off depending on whether there are no failures.
I record outages in help desk in a script, and I give them also the ability to switch a variable in this script as to if the failure Prompt critical should play or not.
The question I have is how to read the value of this variable in my main script? What is the best way to achieve this?
Why not write the value of the variable (power) in an XML file?
See the attached file.
Please rate of messages.
adignan-
-
How to create and insert data with Execute Immediate?
Hi guys
Am stuck on a procedure of formatting in a package... script works okay however integrating a module turns out to be difficult!
Am not used to oracle... I have the script runs, but not in the package... Well not all that... Drop Table worked
CREATE or REPLACE PACKAGE BODY is
PROCEDURE DropTable1 IS
BEGIN
run immediately ("DROP TABLE mytable1");
END;
PROCEDURE PopulateTable1 IS
BEGIN
immediately execute ('CREATE TABLE mytable1 )
AS LONG AS)
Select
substr (T1.genarea, 3, 3) as M_Class,
substr (T1.genarea, 6, 30) as M_Description,
substr (T1.genarea, 36, 3) as M_Class,
substr (T1.genarea, 39, 30) as M_Description,
substr (T1. ItemItem, 1, 3) as product_code,.
T3. CHANNEL_NUM as SALES_CHANNEL,
to_date(''t2.time_id'',''dd-mon-yyyy'') as mis_date,
Sum (T2.ap_cw_cfi_irp + T2.ap_cw_issues_irp) as ap_gross,
sum (t2. Ap_Cw_Cfi_Irp + t2. Ap_Revivals_Irp) as ap_net,
Sum (T2.sp_inc_irp + T2.sp_issues_irp) as sp_gross,
Sum (T2.sp_dec_irp + T2.sp_fs_irp) as sp_net
Of
d_pr t1, t2 age_map t3 law
where
T1.pfx = "WE"and t1.coy ="1" and t1.tabl = "T81" and substr (t1.itemitem, 1, 3) = t2.product_id and t3. AGE_NUM = t2.age_id
Group
substr (T1.genarea, 3, 3),
substr (T1.genarea, 6, 30),
substr (T1.genarea, 36, 3),
substr (T1.genarea, 39, 30),
substr (T1. ItemItem, 1, 3).
T3. CHANNEL_NUM,
to_date(''t2.time_id'',''dd-mon-yyyy'')
)');
COMMIT;
END PopulateTable1;
END test;
/
Thank you
Hello
a few notes.
1. to_date(t2.time_id,'dd-mon-yyyy')
New York T2.Time_ID Cis the varchar2 data type that contains values to JJ-me-YYYY format?
And if, in which language is used for the names of the months? Conversions are point impossible to solve in reasonable time limits without logging of dml errors and unique failure on charges of staging nightly!
2 single quote escaping "alternative in string literals.You can use Q or q to escape single quotes in strings.
http://docs.Oracle.com/database/121/SQLRF/sql_elements003.htm#SQLRF00218
3. validation
Not required because the DDL commands commit implied.
In general I recommend you write commit clauses only in calling script rather than in the code unless it connects with an autonomous transaction.
You end up with a lot of validation of code here and there and you don't know where it is and where it isn't. That is, your process may have more than one appeal process and commit the middle of the process, it is not atomic processes.
Here's the demo although I recommend also using the static table and truncate to efficiency. ETG is good choice for the purpose of maintenance table.
create or replace package testing is procedure staging_one; end; / create or replace package body testing is -- procedure staging_one is -- procedure drop_staging_one is table_does_not_exist exception; pragma exception_init(table_does_not_exist, -00942); begin execute immediate q'{ drop table staging_one purge }'; exception when table_does_not_exist then return; -- fine end; -- procedure create_staging_one is begin execute immediate q'{ -- remove >>> create table staging_one nologging as select * from dual -- <<< remove /* uncomment >>> create table staging_one nologging as select substr(t1.genarea,3,3) as m_class, substr(t1.genarea,6,30) as m_description, substr(t1.genarea,36,3) as m_class, substr(t1.genarea,39,30) as m_description, substr(t1.itemitem,1,3) as product_code, t3.channel_num as sales_channel, to_date(t2.time_id,'dd-mon-yyyy') as mis_date, sum(t2.ap_cw_cfi_irp+t2.ap_cw_issues_irp) as ap_gross, sum(t2.ap_cw_cfi_irp+t2.ap_revivals_irp) as ap_net, sum(t2.sp_inc_irp +t2.sp_issues_irp) as sp_gross, sum(t2.sp_dec_irp +t2.sp_fs_irp) as sp_net from d_pr t1, act t2, age_map t3 where t1.pfx = 'IT' and t1.coy = '1' and t1.tabl = 'T81' and substr(t1.itemitem,1,3) = t2.product_id and t3.age_num = t2.age_id group by substr(t1.genarea,3,3), substr(t1.genarea,6,30), substr(t1.genarea,36,3), substr(t1.genarea,39,30), substr(t1.itemitem,1,3), t3.channel_num, to_date(t2.time_id,'dd-mon-yyyy') <<< uncomment */ }'; -- end; -- main begin drop_staging_one; create_staging_one; end; end; / set serveroutput on exec testing.staging_one; select * from staging_one ; commit ; PACKAGE TESTING compiled PACKAGE BODY TESTING compiled anonymous block completed DUMMY ----- X committed.
-
How can I create and use global variables in busy border?
to preserve the previous value while being used between parent and child symbol?
For some reason, you actually have to call the function inside of another symbol (and not the bodies as before). New version of the same exercise with the following structure where each rectangle and the associated text is encapsulated in an object symbol :
To make the accessible service for another symbol, you add SYM (the parameter of substr() is also adapted to the new id)
Stage.compositionReady event handler:
Total = 0;
//-----------------------------------------
SymincrementByInstanceNum = function (eClick)
{
Console.log (eClick.target.getAttribute ("id"));
=> "Stage_object2_yellowRect2_RoundRect" for example
var num = eClick.target.getAttribute("id").substr (12, 1);
Total += parseInt (num);
SYM. $("total") .html ('total' + total);
}
Each of the object.yellowRect.Click event handler becomes:
sym.getComposition () .getStage ().incrementByInstanceNum (e);
The link given above has been updated and now includes the second version.
Gil
-
Find the missing documents and insert accordingly
Oracle version: Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
Hello gurus
I'm really grateful if someone would help out me. Thanks in advance
Examples of data
Drop, the creating and inserting in tables
drop table TYPE_MST;
drop table TYPE_VERSION;-------------------------
Create Tables:create the table TYPE_MST
(
Type_desc varchar2 (15)
);-----------------
Table insert
insert into TYPE_MST
(
Select 'First' double
Union of all the
Select 'Second' double
Union of all the
Select 'Third' double
);--------
create the table TYPE_VERSION
(
TYPE_DESC varchar2 (15).
MIN_AGE number (5),
MAX_AGE number (5),
VERSION_ID number (5)
);
---------
insert into TYPE_VERSION
(
Select 'First', 0, 5, 100 double
Union of all the
Select 'First', 5, 10, 100 double
Union of all the
Select 'First', 11,15, 100 double
);---------
Queries against existing data
Select * from TYPE_VERSION;The query result
TYPE_DESC, MIN_AGE, MAX_AGE, VERSION_ID
First 0 5 100
First 5 10 100
First 11 15 100
My requirement is that system automatically inserts type_desc missing in TYPE_VERSION.
For example, we have 3 Type_Desc, first, second, third, but in the TYPE_VERSION table, we have data available for only 1 Type_Desc who is "First", this system should insert the missing data in this table using existing data.
I need result something like below:
Required result
TYPE_DESC, MIN_AGE, MAX_AGE, VERSION_ID
First 0 5 100
First 5 10 100
First 11 15 100
Second 11 15 100
Second 5 10 100
Second 11 15 100
Third 0 5 100
Third 5 10 100
Third 11 15 100
Thanks in advance
Concerning
Shu
Hello
It is still not clear what you want.
That's what you want for the examples you gave:
MERGE INTO dst type_version
WITH THE HELP OF)
SELECT DISTINCT
m.type_desc
v.min_age, v.max_age, v.version_id
OF type_mst m
CROSS JOIN type_version v
) src
WE (dst.type_desc = src.type_desc
AND dst.min_age = SRC. MIN_AGE
)
WHEN NOT MATCHED THEN INSERT
(dst.min_age, dst.max_age, dst.type_desc, dst.version_id)
VALUES (src.min_age, src.max_age, src.type_desc, src.version_id)
;
If she's going to do what you want in general depends on what you want in general. As long as I don't know the General rules you want to set up, I don't know if it makes them or not.
This does not seem a very good design. Why do you need a table with all possible combinations? Sounds like you're saying, for example, if 2 lines have the same value of min_age, then have the same values for max_age and version_id, too. This 3rd Normal violares form. Why not have a table with the possible values for min_age max_age version_id, and simply join cross which type_mst when you need to see all possible combinations?
-
How to create a document and insert the words and/or art on both sides of the page
How to create a document and insert the words and/or art on both sides of the page
How to create a document and insert the words and/or art on both sides of the page
You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer. Think of it as a broad a page roll.
When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.
Some printers are capable of automatic double-sided printing. With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages. You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.
-
How to create a file name variable with the County and the date?
Objective: Create a file name variable with the County and the date
Error: get a lot of error. Do you know how to change my code?
Question: how to create a file name variable with the County and the date?
Mini code:
std::string * rawfilepath;
std::string * rawfilename;rawfilepath = "./shared/documents/";
RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
QFile file (rawfilename);
If (file.exists ()) {}
rawfilenamecount ++;
RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
}Thank you for your attention,
Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.
Solution is below.
While (access (rawfilename, F_OK)! = - 1) {}
rawfilenamecount ++;
sprintf (format, RawFileName, rawfilenamecount);
fprintf (stderr, "file exists");
}Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
fprintf (rawlog, "System Time (ms)" ""); -
Hello
I am a fairly new user for Oracle and have found this place to be very useful as I'm learning! One of the guidelines is to provide sample CREATE TABLE and INSERT data. I read the FAQ and in other forums to see if I could better understand this process, but I'm still struggeling reflected. Please can someone explain exactly what I do for these data, I want to be sure that I provided as useful information a lot in my posts to get help as soon as possible. I appreciate everything / all the answers!
Hello
Daniel Strong wrote:
So, something like this:
INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(220,AB,FAST,1);
INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(7,BB,SLOW,7);
INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(221,BC,FAST,1);
INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(8,BD,SLOW,2);
INSERT INTO skills (user_id, skill_nm) VALUES (AB, SLOW);
INSERT INTO skills (user_id, skill_nm) VALUES (BB, SLOW);
INSERT INTO skills (user_id, skill_nm) VALUES (BC, DOWN);
INSERT INTO skills (user_id, skill_nm) VALUES (BD, SLOW);
DESIRED RESULTS:
MU_ID EXTERNAL_ID SKILL_NAME SKILL_LEVEL
220 AB FAST 1
221 AV FAST 1When you get a response, you want it works or is it OK if the answer causes errors?
Obviously, you want people to post answers that work. Make sure that the code of that validation works, too. Test (and, if necessary, correct) your INSERT statements in your own development before posting on this forum system.The literal string values must be in single quotes. I think you meant:
INSERT INTO skills (external_id, skill_nm, mu_id, skill_level) VALUES (220, "AB", "QUICK", 1);
Without the single quotes, AB and FAST are considered as column names or function.
-
How to create a script for the name of the channel to take and insert text on profile in CS5
I am a silkscreen and I print my Photoshop starts. I regularly work with multi channel files or RGB files with additional color channels. I created actions to place check marks, resize images, etc. to be ready to print manually but I create for each display text labels, if they are absent from the original work.
The files I work with have named pipes as "basic white, red, green, blue 284" etc. which indicates the color of the ink. I want to be able to do is create a script that copies the text of the channel name and insert it into a separate or each/all channels to the top of the file, so that when I print every positive there is a label corresponding to the color of the ink.
I don't know if this is even possible, and I am limited in my knowledge when it comes stock and no experience with scripting and have had pretty good luck in the past for actions to do what I want without unnecessary steps.
On my target action registration, it creates a new channel with each individual reg mark then combined in a separate channel in which I just copy the contents and select all channels of ink and fill with black to make them appear, I am happy with the steps that must be that it is not too complicated and if it could do the same with labels I would be happy with that.
Thanks in advance!
Something like that?
// the color used for the text var black = new SolidColor(); black.rgb.hexValue = '000000'; // set this to space the labels var horizontalOffest = new UnitValue(20,'pt'); var doc = app.activeDocument; var currentLayer = doc.activeLayer; var textLayer = doc.artLayers.add(); textLayer.kind = LayerKind.TEXT; // font requires the postscript name of the font textLayer.font = "ArialMT"; textLayer.textItem.size = new UnitValue(9,'pt'); textLayer.textItem.justification = Justification.RIGHT; // set the position for the text. this sets to top right corner of the channel // here it is set so the text baseline ends 40pts from the right edge, 15pts down textLayer.textItem.position = [new UnitValue(doc.width.as('pt')-50,'pt'),new UnitValue(15,'pt')]; textLayer.textItem.contents = 'label';// temp label string for(var channelIndex = 0; channelIndex
-
reading data from a variable, separated by "|" and insert into the table
Hi experts,
I have a file on FTP and I read the file. Now what I have to do is to separate the data and insert them into a table. I have already created the table with the required fields.
How can I get data from str?
code below
declare
File1 UTL_FILE. TYPE_DE_FICHIER;
VARCHAR2 (1000) filename: = "GTECHFILES";
Long str;
Start
File1: = UTL_FILE. FOPEN (filename, 'agent_dump_csv.rep', 'r', 32767);
loop
UTL_FILE. GET_LINE (File1, str);
-dbms_output.put_line (' value is :'|| to_char (STR));
end loop;
UTL_FILE. FCLOSE (file1);
exception
When no_data_found then
dbms_output.put_line ("END OF FILE");
UTL_FILE. FCLOSE (file1);
while others then
UTL_FILE. FCLOSE (file1);
dbms_output.put_line (' ERROR: ' |) SQLCODE |': ' | SQLERRM);
end;You must use ' \ [^ |] +' like regexp:
SQL> create table mytab (a varchar2(20), b varchar2(20), c varchar2(20)); Tabella creata. SQL> declare 2 str varchar2(100):= 'qwureer|iftsdfsuif|123134'; 3 begin 4 insert into mytab 5 values (regexp_substr(str,'[^|]+',1,1), 6 regexp_substr(str,'[^|]+',1,2), 7 regexp_substr(str,'[^|]+',1,3)); 8 end; 9 / Procedura PL/SQL completata correttamente. SQL> select * from mytab; A B C -------------------- -------------------- -------------------- qwureer iftsdfsuif 123134
Max
[My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/17/supporto-di-xml-schema-in-oracle-xmldb/] -
Create a temporary table and insert using a select statement
Hello
I tried to create a temporary table and insert it by using the value in a select statement. Please see below the code
---
CREATE a TEMPORARY TABLE GLOBAL Temp_Test
(
DATE OF DAY_FUTURE
)
AS
SELECT TO_DATE (SYSDATE + ROWNUM, 'DD-MON-YY')
DUAL CONNECT BY ROWNUM FROM < = 14)
---
As soon as I run the script, the error message indicates the following:
--
Error from the 1 in the command line:
CREATE a TEMPORARY TABLE GLOBAL Temp_Test
(
DATE OF DAY_FUTURE
)
ONLY select TO_DATE (sysdate + rownum, 'DD-MON-YY')
Double connect rownum < = 14)
Error in the command line: 2 column: 1
Error report:
SQL error: ORA-01773: cannot specify the types of data in this TABLE to CREATE column
01773 00000 - 'cannot specify the types of column data in this TABLE to CREATE"
* Cause:
* Action:
--
What seems the problem? I already have the data type such as TO_DATE on my select statement.
Any help would be appreciated
Thank youSQL> CREATE GLOBAL TEMPORARY TABLE Temp_Test 2 ( 3 DAY_FUTURE 4 ) on commit preserve rows 5 AS 6 SELECT TO_DATE(SYSDATE+ROWNUM, 'DD-MON-YY') 7 FROM DUAL CONNECT BY ROWNUM <= 14 8 / Table created. SQL> select count(*) 2 from temp_test 3 / COUNT(*) ---------- 14
-
Programmatically create an appointment: missing variable in the container of result
Hello world
For my purpose of tests, I need to programmatically create a sequence. In this sequence, I need to insert steps from Rendezvous.
Everything works very well when they are created, but when I run the sequence / stages created this error always appear for the appointment stage:
- Unknown variable 'TimeoutOccured '; Error in the item "Result.TimeoutOccured".
According to using TS, this variable must be created when I set up stage of the operation to date. Drag and drop step of inserting TS palette works very well, and the variable is created when you select the operation "appointment". But when you do the same thing through programming, the variable is not created.
Here are the steps performed to create the Appointment stage:
- I have create a new step by using the Engine.NewStep method
- I put the name of the step using Step.Name
- I put the properties of an appointment using a statement (Parameters.BranchesRendezVous.RDVStep is the variable holding the reference of step):
- Parameters.BranchesRendezVous.RDVStep.AsStep.Operation = 1, //A value that specifies the operation of the step to perform. Valid values are 0 = crΘer, 1 = Rendezvous and 2 = Get Status
- Parameters.BranchesRendezVous.RDVStep.AsStep.NameOrRefExpr = Parameters.BranchesRendezVous.RefName, //Contains the expression name Rendezvous for operation of creation and expression name Rendezvous or reference for all Rendezvous operations
- Parameters.BranchesRendezVous.RDVStep.AsStep.TimeoutEnabled = False, //The Timeout allowed for the operation of Rendezvous
- Parameters.BranchesRendezVous.RDVStep.AsStep.ErrorOnTimeout = True, //The Timeout causes Run-Time Error for the Rendezvous operation
- Parameters.BranchesRendezVous.RDVStep.AsStep.RendezvousCountExpr = Parameters.NbBranches, //The expression number of Threads by appointment for the create operation
- Parameters.BranchesRendezVous.RDVStep.AsStep.Lifetime = 3, //A value that specifies the lifetime setting to use for the create operation. Valid values are 0 = same as sequence, 1 = even as a thread, 2 = use reference object, and 3 = same as execution
- 4. then I insert the step in my current sequence by using the Sequence.InsertStep method
Everything works fine, the appointment stage is perfectly created and all the properties are set finely. However, the TimeouOccured variable is missing in the container Step.Result (help says TS that this furniture exists when the step is configured as a date (see operation = 1)).
I'm doing something wrong somewhere? Why did this variable missing?
You probably need to create the property programmatically using NewSubProperty().
-Doug
-
How to get data from a database table and insert into a file
Hello
I'm new to soa, I want to create an xml with the data from database tables, I'll have the xsd please suggest me how to get the data in the tables and insert in a file
concerningin your bpel process, you can use the db adapter to communicate with the database.
with this type of adapter, you can use stored procedures, selects, etc to get the data from your database into your bpel workflow.When did it call in your bpel to the db adapter process it will return an output_variable with the contents of your table data, represented in a style of xml form.
After that, you can use the second card (a file synchronization adapter) to write to the content of this variable in output to the file system
-
Select values from the db1 table and insert into the DB2 table
Hello
I have three databases oracle running in three different machines. their ip address is different. among the DB can access databases. (means am able to select values and insert values into tables individually.)
I need to extract data from the DB1 table (ip say DB1 is 10.10.10.10 and the user is DB1user and the table is DB1user_table) and insert the values into DB2 table (say ip DB2 is 11.11.11.11 and the user is DB2user and table DB2user_table) of DB3 that is to have access to the two IPs DB.
How do I do this
Edited by: Aemunathan on February 10, 2010 23:12Depending on the amount of data must be moved between DB1 and DB2, and the frequency at which this should happen, you might consider the SQL * COPY more control. I think it's very useful for one-off tasks little, so I can live within its limits of the data type. More http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/apb.htm#i641251.
Change some parameter of sqlplus session are almost mandatory in order to get decent transfer rates. Tuning ARRAYSIZE and COPYCOMMIT can make a huge difference in flow. LONG change may be necessary, too, depending on your data. The documentation offers these notes on use:
To activate the copy of data between Oracle and databases non-Oracle, NUMBER of columns is replaced by DECIMAL columns in the destination table. Therefore, if you are copying between Oracle databases, a NUMBER column with no precision will become a DECIMAL column (38). When copying between Oracle databases, you must use SQL commands (CREATE TABLE AS and INSERTION), or you must make sure that your columns have a specified precision.
SQL * the VALUE LONGER variable limits the length of the LONG column you are copying. If all LONG columns contain data exceeds the value of LONG, COPY truncates the data.
SQL * Plus performs a validation at the end of each successful COPY. If you set the SQL * variable more COPYCOMMIT DEFINED to a value positive n, SQL * Plus performs a validation after copying all lots n of records. The SQL * Plus ARRAYSIZE variable SET determines the size of a batch.
Some operating environments require that the service names be placed between double quotes.
From a SQL * Plus term on DB3, can resemble the command to move all content from my_table in DB1 to the same table in DB2
COPY from user1/pass1@DB1 to user2/pass2@DB2 - INSERT INTO my_table - USING select * from my_table
Note the SQL code * more line-continuation character ' - '. It is used to escape the newline character in a SQL * Plus command if you do not have to type all on one line. I use it all the time with this command, but I can't locate the documentation on that right now. Maybe someone else can put their finger on it.
There are other ways to accomplish what the command copy and it is not without its quirks and limitations, but I find that there is usefulness in an Oracle Toolbox.
-
dynamically create and destroy the custom menu item
I have a standard TestStand platform that I use on multiple systems. On some systems, I have a few sequences of calibration and I would like to have the Update menu to have the RunSequence of these sequences of calibration. I know how to manually create these menu items, but they are no longer valid for some sequence files. I would use the sequence SequenceFileLoad to dynamically create menu items and the SequenceFileUnload to destroy these menu items.
I've played around with the API, but cannot determine the correct path to get to the create and destroy the custom menu items. Does anyone know how this can be done?
Thank you
Matthew
Yes, see the online help for the members of the following APIs:
Engine.GetEditTimeToolMenuItems
EditTimeMenuItems
EditTimeMenuItem
Basically, you get a collection of tool using Engine.GetEditTimeToolMenuItems () menu items and then call EditTimeMenuItems.Insert () or EditTimeMenuItems.Remove (). If you insert a you get returns an EditTimeMenuItem object on which you can change the settings.
In addition, since it has an expression to hide items in menu tool, you need not necessarily to destroy, you can hide them instead.
Hope this helps,
-Doug
Maybe you are looking for
-
Why my links do not illuminate so others can click on?
When sending emails to announce a new business or send the link to somewhere else, illuminate, so that they can simply click and go.
-
HP pavilion entertainment pc - screen says enter the password administrator or power on password
After 3 password attempts here is what he saidSystem disabled64271153
-
Original title: Windows XP and Outlook Express 6 I have a new computer with outlook express and went through the set up instructions. When I tried to send a test email, I got this error message: "Your server has terminated suddenly the connection. T
-
Photosmart 7520 disconnects internet connection
I recently bought a 7520 Photosmart all-in-one which is connected to my home wireless. It works great except for one very annoying thing. If I print something, leave the printer on and walk, when I come back a moment later my Mac has disconnected f
-
VO extension: Transient attributes not getting seeds not filled
Hi gurus,I expanded VO by adding two additional columns (questioned). Even if the new columns and surveyed existing columns are coming fine on the page, the calculated columns return null.Calculated columns are populated in the VORowImpl code seeded