create batch with password files

Similar Questions

• Create Setup with source files

  Hello

  I have a word search game, and I have a dictionary and the VI create a single file with 'latest scores. " I want to creat installer which indclude these files when im to install in another computer without labview.

  Thank you!

  First, you must use a project.  The project should include all source files and any other files you want to include in your Setup program.

  Then, you create a build for an executable specification.  Once which is built, make a build for the installer specification.  The Setup program must include all components of, OR you may need to run your program (such as the execution engine).  You can also specify where to install the files...

• Create cases with the file vi:s

  I want to create a business with n number of sub vi inside. I have a folder containing a number n of vi:s, they all have the same inputs and outputs.

  My problem is that I don't know how it is and I want to be able to open a specific according to its name in a string, send in some settings and some back.

  Is it possible to create a deal on startupp that has as many executives because it is vi:s in the folder, give the case the name of the vi framework, add the vi icon in the case and connect the wires. Or is it possible to do it in a way outher? Qualifying in any way?

  

  / Richard

  You cannot dynamically create cases but as long as the name of the VI can be obtained from the string, there is no need to. You can dynamically call a VI. There are expedition of examples that illustrate this example example, dynamic load, etc.).

  Also, you can't link to an image that is on your local drive. You need to attach to your message first, and then you can link to that.

• Install the Acrobat batch - open password needs me to reenter passwords for each file?

  Hello

  I'm sure I'm missing something simple here, I use processing documents Acrobat pro 9.4.4 trying to set a password to open multiple PDFs that are freshly created from sources .docx (using Acrobat to create) a batch.

  Batch, I take command of security and define "encrypt all the contents of the document" and check the "require a password to open the document", then key the password (twice) and press OK. Then I run.

  I output all option to add as a prefix to the files so I know that he treats. When I run the batch sequence, it appears on password security - settings window, and if I just press OK and do not re-enter the password (twice), the new pdf is created without a password to open (he said 'Secured' on the title bar when it opens). If I get the password (twice) for each processed file, then I find myself with open passwords to work on PDF files. I can't understand what I'm doing wrong - any suggestions welcome!

  I use Windows XP Professional 5.1.2600.

  Thank you very much for reading, hope that you have some ideas to help.

  Peter

  You must change the mode of interactivity. See my responses on this thread:

  http://forums.Adobe.com/message/3703411

• Files & folder sharing between XP, Vista, Seven with password protected

  How to share files or folder between XP, Vista & seven... must password protected
  My vista and my friend seven sharing very well, is password protected and I would like to add another XP at the center network and sharing as well, but I find the xp you have a problem, it can make sharing with vista & seven only without password protected and I would like to know how can I do with password protected sharing.
  Below are done on xp:
  1. install the update kb922120
  2.secpol.msc-> authentication security LAN network manager set to send LM & NTLMv2 - use NTLMv2 session security if negotiated.
  Using Xp to Vista to access, seven a shared folder, no problem, while the password protected is located next
  Using XP to Vista, the folder shared seven, the access you have problem while the password is defined on
  It show no permission, but suppose that displays the prompt for credentials...

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• Cannot use a pfx with no password file in a KeyManagerFactory

  I have a pfx file that contains a private key and a corresponding self-signed certificate. The file pfx itself is not protected by a password. I can't use this pfx file to initialize a KeyManagerFactory to establish a SSL connection.
  
  Here's some code that shows what I'm trying to do:
  
  InputStream ksStream = ResourceReader.getResourceAsStream ("< pfx-file-location-on-file-system >");
  Char [] password = null; given that the pfx file has no password on it
  Keystore keyStore.load (ksStream, password);
  
  KeyManagerFactory kmf is KeyManagerFactory.getInstance ("SunX509", "SunJSSE");.
  KMF.init (keystore, password);
  
  This operation fails with this exception:
  
  java.security.UnrecoverableKeyException: Get Key failed: / by zero
  at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineGetKey(PKCS12KeyStore.java:270)
  at java.security.KeyStore.getKey(KeyStore.java:763)
  to com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl. < init > (SunX509KeyManagerImpl.java:113)
  to com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$ SunX509.engineInit (KeyManagerFactoryImpl.java:48)
  at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
  at jsse.common.JsseSample.createKeyManagerFactory(JsseSample.java:294)
  at jsse.common.JsseSample.createKeyManagerFactory(JsseSample.java:306)
  at jsse.server.Simple.runSample(Simple.java:81)
  at jsse.server.Simple.main(Simple.java:57)
  Caused by: java.lang.ArithmeticException: / by zero
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  to com.sun.crypto.provider.PKCS12PBECipherCore$ PBEWithSHA1AndDESede.engineInit(DashoA13*..)
  at javax.crypto.Cipher.a(DashoA13*..)
  at javax.crypto.Cipher.a(DashoA13*..)
  at javax.crypto.Cipher.init(DashoA13*..)
  at javax.crypto.Cipher.init(DashoA13*..)
  at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineGetKey(PKCS12KeyStore.java:251)
  ... 8 more
  
  This code works fine if I set a password for the pfx file, and then use this password to load the keystore and then use in the KeyManagerFactory.
  
  My question is: why can I not use a pfx file that doesn't have a password on it?
  
  Thank you
  R.
  
  Published by: 907570 on January 12, 2012 01:01
  
  Published by: 907570 on January 12, 2012 01:18

  The actual code used to extract the key private key file is in the sun.security.pkcs12.PKCS12KeyStore.engineGetKey () method and the private key decryption code fragment OpenJDK version

                 SecretKey skey = getPBEKey(password);
              Cipher cipher = Cipher.getInstance(algOid.toString());
              cipher.init(Cipher.DECRYPT_MODE, skey, algParams);
              byte[] privateKeyInfo = cipher.doFinal(encryptedKey);
  
              PKCS8EncodedKeySpec kspec = new PKCS8EncodedKeySpec(privateKeyInfo);
  

  There is therefore no conditional autour decryption he always tries to generate a PBE key, even if no key is scheduled and then decrypt with it. Of course, it could be a password less pfx file actually has a default password, there must be a request for change (PKCS12 perhaps) that covers it, but I bet that means really that without encryption is done. Assuming that the PVE in JDK1.7 code differs little of this and that have no password really means that there is no password so that there will be no way in which we can use the Sun provider to access the private key.

  Like you, I found that BouncyCastle can handle this situation but if you really cannot work with BouncyCastle then the only alternative I can think of (that do not required a ton of code to write) is to use OpenSSL to change the pfx to a default password password. If all the machines that use your installed OpenSSL code it could be done within your Java ProcessBuilder using code. Not very attractive, I know, but given that the PVE cannot handle the password less pfx files you have to use a very attractive solution.

  Published by: sabre150 on January 13, 2012 12:28

  To create a new pfx file with a different password seems to take two OpenSSL commands: -.

  OpenSSL pkcs12 - in cert.pfx - by fred
  followed by
  OpenSSL pkcs12-export - in fred-out fred.pfx

• Computer Dell laptop, they put as administrator with password created now says access denied need to log on as an administrator. But I did not log Administrator icon

  I've had my laptop by dell. on their return, I was signing the administrator with password created. It was working fine until I got the blue screen of death, and then in the mist to restart on the desktop, the windows 7 installation began as I receive it. Well, I got a few documents and photos that I had and they are no longer under one account I created. Also, now I can't print it said access denied need to log on as an administrator. But I did not log Administrator icon more. Help, please!

  I could do this:

  • Reference Dell request the logon credentials.
  • Plan in advance and create, test and document a spare, even admin account that you have a spare House key. Relying on a single unique administrator account is far too risky!

• PS_Exec (P): Error of the command batch with reason: no such file or directory (2)

  We have symantec pgp installed in our system and trying to decrypt a file through the app engine.

  our process procedure.

  1 FTP the source files.

  2. search files

  3. use pgp to decrypt the file by file

  trying to decipher runs aground and always gives following error

  PS_Exec (P): Error of the command batch with reason: no such file or directory (2)

  When I run the same command using the command line it goes thru very well.

  running order: decrypt pgp - q - passphrase "xxxxxxxxxxxxxxxxxxxx exit»--/data/staging/bank_statements/Reconciliation_files/BAI2_20150618155803.bai.asc--/data/staging/bank_statements/Reconciliation_files/BAI2_20150618155803.bai.

  any help is really appreciated

  Hi all

  I finally understood what happened. The installation of PGP directory is located in/usr/local /. So we moved the installation from this location PS_HOME location and he started to work very well.

  so our installation location current symantec pgp is pgp/PS_HOME /.

  Another point to note was if we are trying to encrypt or decrypt using PeopleSoft PSExec() and these files are under/usr directory structure order Symantec PGP fails to do. the same command works fine through command line, but not through PSExec(). Indeed, the user has full access, but even he couldn't do anything. . But if we use our own custom directories the file gets encrypted and decrypted as you wish.

  Hope these little things help.

• Comment create a private with password and login access?

  Comment create a private with password and login access?

  If all you need is to grant a person/company access to a specific folder on your site (a location test for their website for example), you can usually do this from your control panel hosting account. You must consult your webhost for exact directions on how to do it.

  If you need a more robust record and the system log-in, you will need to become familiar with a language such as php server-side and a database like mySQL. DW has nothing built-in that will do these things for you, however you can use DW to encode or lining up third-party code on your site.

• How can I create a second digital signature related to my alternate email?  I want to have two digital signatures with passwords.

  How can I create a second digital signature related to my alternate email?  I want to have two digital signatures with passwords.

  I think you mean digital certificate to sign (digital ID). You can create as many of them as you want. Simply select "New ID" in the field "sign in" in the dialog box "sign.

• I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

  I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

  You click on Expert in pse before trying to add layers?

  Or it is possible that the image is 16-bit/channel.

  In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

• Several problems with batch controller - skip files, lost watermarks etc.

  I record the action exactly how I want: edition, placing watermarks (incorporated place) by putting them where I want that they re-sizing, save as (with details of jpg), etc. before I stop recording. When I do the batch automate with this action, the watermark is placed almost completely out of the picture, it will increase from 1 to 10 file (files skip 2-9), it worked well on a previous batch with a similar action to the folder. Nothing works correctly for this one. Help?

  Adobe Photoshop Version: 2014.2.2 20141204.r.310, 2014/12 / 04:23:59:59 CL 994532 x 64

  Operating system: Windows 64-bit 8.1

  Post edited by: Adam Jordan

  Ask in the PS forum and provide details about your files and the exact steps in the action.

  Mylenium

• can I create a private space (members only) with password (or similar)?

  Hi guys, I need to create a "private space" to put inside some catalogues and prospectuses to download, with access only with psw or similar.

  Is this possible?

  Have U some ideas? (not with the guests of BC).

  Thanks in advance

  Hello

  Please check this thread Re: can I create a login/password in the Muse for a HTML5 page or two?

• Connecting to a remote database (slowed down) with the password file authentication

  Hi all
  
  I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges? It is said in the Oracle book - one to page 210 in the section - operating system and the file password authentication:
  
  Connection with authentication by password file or operating system is always possible, any State of the instance and the database are in and it is necessary to issue commands to START or STOP.
  
  Above indicates that it is possible, but I can't do it.
  
  I managed to connect to the remote database that was in mode nomount (see below for more details).
  
  When I first tried to connect to a remote database (idle instance) using the password file authentication, it gave due to error:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:59:28 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect
  descriptor of
  
  Enter the user name:
  
  After the start of the database in nomount mode I was getting following error:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:48:36 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  ERROR:
  ORA-12528: TNS:listener: all appropriate instances are blocking new connections
  
  Enter the user name:
  
  Then I added the clause (UR = A) my listener.ora file and after that it work and I was able to connect:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 14:04:49 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  SQL >
  
  I have all the entries of necessairly in tnsnames.ora on my local host.
  
  Also, I have no problems when connecting as user sys with sysdba when the DB is open, but can't get it working on an idle instance.
  
  I know I can use OS authentication but want to know if there is a mistake in the book or I'm doing something wrong.
  
  Kind regards
  Dawid
  
  Edited by: 978239 2012-12-21 06:24

  I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges?

  You can, but you need to statically register the database with the listener.

• Problems with saving files, creating new layouts div fluid

  Problems with saving files, creating new layouts div fluid. Can I reinstall all the software Dreamweaver?

  Thank you

  I reinstalled and all is well.

  Sent from my iPad