Create line with no fill

Similar Questions

• Hello! Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  Hello!

  Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  No, I don't think.

• Is it possible to add two strokes to text with a filling between the two to make an edge effect?

  I've been playing in Illustrator specifically with the menu appearance with strokes and fills. I would like to do something more complex. I posted a this kind of idea of what I want to screenshot. Instead of add simply several traces, I want to have say two white lines with the filling under the same color of the background color is.

  I would do this with strokes or fills? Is there a certain order, that they must be in my appearance Panel?

  

  something like that?

  

  That's two shots, the one of them compensate for slightly (effect > path). I just got rid of filling completely. Double click on 'Print' and trash filling it.

• What is the best way to create a line with triangles at each end, as in a timeline? (See attached example).

  

  Sorry for the low resolution. I would like to create a line with a triangle at each end, similar to the one illustrated. What is the best way to achieve this using InDesign? I will create three or four and we will add the month abbreviations for years.

  I'd probably use the online tool to create the line. You can hold the SHIFT key to make the straight line. For triangles, you can either use the polygon tool (shift click to set the number of sides) or you can create a square with the rectangle tool (hold down the SHIFT key while dragging to make a square) and use the pen tool to remove a corner of the shape, creating a triangle. I generally prefer the polygon tool.

• I'm drawing a curved line with the pen tool, but he fills in a solid form.  I want only the line - what I have to change?

  I'm drawing a curved line with the pen tool, but he fills in a solid form.  I want only the line - what I have to change?

  pmreagans,

  Set the fill to zero at the bottom of the Toolbox.

• How to fill out the "to:" line with a variable email address?

  I'm new to coding and am not sure how to ask my question. I have a link in an 'Email' symbol that I would like to have the window open to a 'mailto', but there are several instances of that symbol on the timeline, each using a different email address. If the [symbol]. Email.Click code reads as follows:

  Window.Open ('mailto:'+ sym.getVariable = ("emailWindow"), "_self")

  and the line in the Stage.creationComplete code that is supposed to call the variable code reads:

  sym.getSymbol("Details_David").$("Email").html ("[email protected]" "").setVariable("emailWindow","[email protected]");

  With this code, the browser opens a window of mailto, but the ' to: ' line readings, "indefinite".

  Either in the [symbol]. Email code. Click, I have:

  Window.Open('mailto:"emailWindow"',"_self")

  without the "emailWindow" as the variable name, the "to:" line to the mailto line reads, "emailWindow".

  How to fill out the "to:" line with a variable email address?

  Otherwise, it works better:

  1)

  replace

  sym.getSymbol("Details_David").$("Email").html ("[email protected]").setVariable("emailWindow", "mailto:[email protected]");

  with

  sym.getSymbol("Details_David").$("Email").html ("[email protected]");

• How to create a line with pointed head

  Hello
  In my application, I need to draw the line with pointed head, I don't know how to set a custom with pointed head line.
  
  Is there a solution, please answer.
  
  Thank you

  Hi, add this function after drawing the line

  public function createArrow (): void
  {
  var angle: Number = Math.atan2 (getY2 () - getY1 (), getX2 () - getX1 (());
  graphics.lineTo (getX2 () - arrowHeight * Math.cos (angle) - arrowWidth * Math.sin (angle),)
  getY2 () - arrowHeight * arrowWidth + Math.sin (angle) * Math.cos (angle));
  graphics.lineTo (getX2 (), getY2());
  graphics.lineTo (getX2 () - arrowHeight * arrowWidth + Math.cos (angle) * Math.sin (angle),)
  getY2 () - arrowHeight * Math.sin (angle) - arrowWidth * Math.cos (angle));
  }

  getX1(), getY1(), getx2() and getY2() are the start and finish of the line

  Hope it will work for you.

• We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Hi all

  We can add a button to the BP to approve Budget so that it can read all the charges in question cost journal line and auto fill on the grid.

  Let's say I have a cost with 5 code cost journal

  Code 1 price

  2 cost code

  Code 3 cost

  Code 4 cost

  Code 5 cost

  BP budget approval, after that I click on New, can I add a button to the tab the line items so that when I click on this button, it reads all codes of cost in the cost journal and auto fill on the grid?

  You can create a new 'model' BP for this purpose. Line item type. Then add a line manually with a cost on each code. Then you can use the copy in your BP BA record consolidate the function to copy the line items to the new folder of BP (including all cost codes) into your folder of BA. That is to set up a model record once with all cost codes and then copy consolidate billing it to all lines new record of BA. would this work?

• How can I play files CSV lines with a different number of columns?

  Hi all

  I am trying to load CSV with DIAdem 2014 files, and I found there is a great tool, "use".

  However, with the CSV use tool, there are critical problem with my data files. (See photo)

  As you can see the CSV file attached, it includes a lot of lines with different columns.

  And here, use read the number of columns of 1st line (e.g.: 4 columns) and set it as the number of columns to read.

  So I can not load all of the data (e.g.: 53 columns) if first row data were lower than columns.

  Can anyone recommend any approach, please?

  Kind regards

  Young

  Admin 24/03/16 Note: files deleted by request of the user

  I just add a few lines of script and fix the related use. (I just added the code to get a direct look).

  The uri of the file will appear as a new kind of load in the dialog file tiara is intalled by double click

  Would be nice if you could provide some information, how the data was created. Maybe we can it add as official of our web page to use plugin.

  Option Explicit
  
  Void ReadStore (File)
  File.Formatter.Delimiters = «»
  
    File.Formatter.LineFeeds = \n
  
    File.Formatter.DecimalPoint = '. '.
  Dim startLine: startLine = file. GetNextLine()
  
    <>InStr (startLine, ' [Tenergy Bus Log Data] "" ") then
  
      call RaiseError()
  
    end if
  And that not File.Position = File.Size
  
      Dim groupName: groupName = file. GetNextStringValue (eString)
  
      If it isn't root. ChannelGroups.Exists (groupName) then
  
        root. ChannelGroups.Add (groupName)
  
      end if
  
      Dim grp: set grp = root. ChannelGroups (groupName)
  
      Dim i: i = 1
  
      do for real
  
        Dim val: val = file. GetNextStringValue (eR64)
  
        If isempty (val) then
  
          Exit
  
        end if
  
        < i="">
  
          dial the grp. Channels.Add ("Brand" & I, eR64)
  
        end if
  
        protected chObj: set chObj = grp. Channels (i)
  
        chObj.Values (chObj.Size + 1) = val
  
        i = i + 1
  
      loop
  
      Call File.SkipLine)
  
    Wend
  End Sub

• SQL Loader - ignore the lines with "rejected - all null columns."

  Hello

  Please see the attached log file. Also joined the table creation script, data file and the bad and throw the files after execution.

  Sqlldr customer in the version of Windows-

  SQL * Loader: release 11.2.0.1.0 - Production

  The CTL file has two clauses INTO TABLE due to the nature of the data. The data presented are a subset of data in the real world file. We are only interested in the lines with the word "Index" in the first column.

  The problem we need to do face is, according to paragraph INTO TABLE appears first in the corresponding CTL lines file to the WHEN CLAUSE it would insert and the rest get discarded.

  1. statement of Create table : create table dummy_load (varchar2 (30) name, number, date of effdate);

  2. data file to simulate this issue contains the lines below 10. Save this as name.dat. The intention is to load all of the rows in a CTL file. The actual file would have additional lines before and after these lines that can be discarded.

  H15T1Y Index | 2. 19/01/2016 |

  H15T2Y Index | 2. 19/01/2016 |

  H15T3Y Index | 2. 19/01/2016 |

  H15T5Y Index | 2. 19/01/2016 |

  H15T7Y Index | 2. 19/01/2016 |

  H15T10Y Index | 2. 19/01/2016 |

  CPDR9AAC Index | 2. 15/01/2016 |

  MOODCAVG Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  3. the CTL file - name.ctl

  DOWNLOAD THE DATA

  ADD

  IN THE TABLE dummy_load

  WHEN (09:13) = "Index".

  TRAILING NULLCOLS

  (

  COMPLETED name BY ' | ',.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

  IN THE TABLE dummy_load

  WHEN (08:12) = "Index".

  TRAILING NULLCOLS

  (

  COMPLETED name BY ' | ',.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

  invoke SQL loader in a file-> beats

  C:\Oracle\product\11.2.0\client\bin\sqlldr USERID = myid/[email protected] CONTROL=C:\temp\t\name.ctl BAD=C:\temp\t\name_bad.dat LOG=C:\temp\t\name_log.dat DISCARD=C:\temp\t\name_disc.dat DATA=C:\temp\t\name.dat

  Once this is run, the following text appears in the log file (excerpt):

  Table DUMMY_LOAD, charged when 09:13 = 0X496e646578 ('Index' character)

  Insert the option in effect for this table: APPEND

  TRAILING NULLCOLS option in effect

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  NAME                                FIRST     *   |       CHARACTER

  RATE                                 NEXT     *   |       CHARACTER

  EFFDATE NEXT * |       CHARACTER

  SQL string for the column: ' TO_DATE (: effdate, "MM/DD/YYYY").

  Table DUMMY_LOAD, charged when 08:12 = 0X496e646578 ('Index' character)

  Insert the option in effect for this table: APPEND

  TRAILING NULLCOLS option in effect

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  NAME                                 NEXT     *   |       CHARACTER

  RATE                                 NEXT     *   |       CHARACTER

  EFFDATE NEXT * |       CHARACTER

  SQL string for the column: ' TO_DATE (: effdate, "MM/DD/YYYY").

  Record 1: Ignored - all null columns.

  Sheet 2: Cast - all null columns.

  Record 3: Ignored - all null columns.

  Record 4: Ignored - all null columns.

  Sheet 5: Cast - all null columns.

  Sheet 7: Discarded - failed all WHEN clauses.

  Sheet 8: Discarded - failed all WHEN clauses.

  File 9: Discarded - failed all WHEN clauses.

  Case 10: Discarded - failed all WHEN clauses.

  Table DUMMY_LOAD:

  1 row loaded successfully.

  0 rows not loaded due to data errors.

  9 lines not loading because all WHEN clauses were failed.

  0 rows not populated because all fields are null.

  Table DUMMY_LOAD:

  0 rows successfully loaded.

  0 rows not loaded due to data errors.

  5 rows not loading because all WHEN clauses were failed.

  5 rows not populated because all fields are null.

  
  

  The bad file is empty. The discard file has the following

  H15T1Y Index | 2. 19/01/2016 |

  H15T2Y Index | 2. 19/01/2016 |

  H15T3Y Index | 2. 19/01/2016 |

  H15T5Y Index | 2. 19/01/2016 |

  H15T7Y Index | 2. 19/01/2016 |

  CPDR9AAC Index | 2. 15/01/2016 |

  MOODCAVG Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  H15TXXX Index | 2. 15/01/2016 |

  
  

  Based on the understanding of the instructions in the CTL file, ideally the first 6 rows will have been inserted into the table. Instead the table comes from the line 6' th.

  NAME	RATE	EFFDATE
  H15T10Y Index	2	January 19, 2016

  
  

  
  

  If the INTO TABLE clauses were put in the CTL file, then the first 5 rows are inserted and the rest are in the discard file. The line 6' th would have a ""rejected - all columns null. "in the log file. "

  
  

  Could someone please take a look and advise? My apologies that the files cannot be attached.
  

  Unless you tell it otherwise, SQL * Loader assumes that each later in the table and what clause after the first back in the position where the previous left off.  If you want to start at the beginning of the line every time, then you need to reset the position using position (1) with the first column, as shown below.  Position on the first using is optional.

  DOWNLOAD THE DATA

  ADD

  IN THE TABLE dummy_load

  WHEN (09:13) = "Index".

  TRAILING NULLCOLS

  (

  name POSITION (1) TERMINATED BY ' | '.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

  IN THE TABLE dummy_load

  WHEN (08:12) = "Index".

  TRAILING NULLCOLS

  (

  name POSITION (1) TERMINATED BY ' | '.

  rate TERMINATED BY ' | '.

  COMPLETED effdate BY ' | '. ' TO_DATE (: effdate, "MM/DD/YYYY").

  )

• How to view a newly created line only in adf table?

  Hi all

  JDEV 12.1.3.0

  When you drag move a VO on a page as a table of adf, it displays all the lines available in the whole of lines. I want to display only the rows that are newly created in the user interface.

  I achieved this goal by creating a transient "RowStatus" attribute, which will be the State of the entity (0-1 new, unmodified, 2 - modified) and I filtered the table using this status of line by double clicking on the VO and specified a filtered attribute and the value. But the performance is very poor, because I think it makes even all records and only newly created filter lines.

  Is there another way optimized to achieve?

  How to achieve this programmatically?

  If I run VO.executeEmptyRowSet () when the page loads, the table is rendered empty at first, but after call CreateInsert operation, all rows are returned with this new line.

  You see the same behavior if you create lines programmatically (with: vo.createRow (); vo.insertRow (row)) instead of CreateInsert?

  If it does not then only "programmatic" option is probably to set where clause 1 = 2

  Dario

• Selection of lines with the range Paging VO

  Hello

  JDev 11.1.2.4

  I created a VO based on an OA. I added a transitional attribute in the original Version, this attribute is named Selelected of type Boolean initialized to false (default value Expression: false-Expression of Refresh value: false). That VO appears as an af:table. The attribute is displayed as selectBooleanCheckbox. The VO is set with an access mode of range Paging and a size of 28.

  < af:selectBooleanCheckbox value = "#{row.bindings.Selected.inputValue} '"

  label = "#{bindings." VwRhdPortfolioTranWrkSend11.hints.Selected.label}.

  required = "#{bindings." VwRhdPortfolioTranWrkSend11.hints.Selected.mandatory}.

  shortDesc = "#{bindings." VwRhdPortfolioTranWrkSend11.hints.Selected.tooltip}"id ="it1' autoSubmit = 'true '.

  valueChangeListener = "#{pageFlowScope.portfolioTransferBean.onWorkSelection}" >

  < f: validator binding="#{row.bindings.Selected.validator}"/ >

  < / af:selectBooleanCheckbox >

  The table shows the 25 lines. The user clicks one of the checkbox to select a line. The valueChangeListener is called with the new value (auto submit = true) as expected. Then the user scroll down for another "page" in the table, new lines are displayed. Then it scrolls to the first page. The previous selected checkbox is reset as not selected. The selection is lost.

  Is this expected behavior? If so how do you get a selection of lines with a VO of range paging.

  Thank you

  Try to create the transitional attribute in OT instead of VO.

  See you soon

  AJ

• javax.management.InstanceNotFoundException: com.oracle.jps:type = JpsCredentialStore when creating credentials with credential store framework

  Hello

  I have an installation of WebLogic 11 g 1 material (on Windows Server 2012 with Oracle backend) and try to create credentials with credential store framework following steps inhttp://www.redheap.com/2013/06/secure-credentials-in-adf-application.html

  I tried to do with WLST (under Oracle\Middleware\oracle_common\common\bin) and get the following error:

  WLS: / WcsDomain/serverConfig > createCred (map = "ClayTablet.Sample", key is "TestKey", user = "TestUser", password = "blah", desc = "Test"key);

  Now to the tree of domainRuntime. It is a tree read-only with DomainMBean as the root.

  For further assistance, use the help (domainRuntime)

  COMMAND FAILED for an unknown reason, check the stack for more details trace

  Traceback (innermost last):

  Folder "system <>", line 1, in?

  File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\jpsWlstCmd.py", line 522 to createCred

  File "C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\jpsWlstCmd.py", line 504, createCredImpl

  at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)

  at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)

  at javax.management.remote.rmi.RMIConnectionImpl_1036_WLStub.invoke (unknown Source)

  to weblogic.management.remote.common.RMIConnectionWrapper$ 16.run(ClientProviderBase.java:918)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs (SecurityManager.java: 146)

  at weblogic.security.Security.runAs(Security.java:61)

  at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:916)

  to javax.management.remote.rmi.RMIConnector$ RemoteMBeanServerConnection.invoke (RMIConnector.java:993)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  javax.management.InstanceNotFoundException: javax.management.InstanceNotFoundException: com.oracle.jps:type = JpsCredentialStore

  Thank you

  Yu

  P.S. I was using the command WLST under Oracle\Middleware\wlserver_10.3\common\bin to do the same thing and got a different error NameError: createCred and posted a question about that in virtue of How to create credentials under Bank of credentials?

  After searching the same error message in the community, I tried to move to WLST under Oracle\Middleware\oracle_common\common\bin and got the error posted here.

  Having extended my domain name with JRF and JRF WebService services asynchronous, I was able to run "createCred" and "listCred" and so on.

  Yu

• Performance problem of creating index with LOB/CLOB content

  Hello
  
  I have a problem with indexing performance with a table containing columns of text
  also a clob and a lob column.
  
  Indexing with 20,000 lines takes about 1 hour on 11.2.0.4 with the last batch of patches 12 on
  win x 64.
  
  on a 11.2.0.1, the process is done in a few minutes.
  
  So what can I do to find out where is the problem?
  
  I use filter auto and basic lexer.
  Operating system is W 2008 R2 SP and latest patches. OS lang is English.
  DB is installed with AL32UTF8 and German and English language packs.
  
  also watched and ctx_user_index_errors and pending and there is no error or waiting in lines.
  After the index is created, everything works fine. during the creation of index no other user is connected to the database.
  
  so why 11.2.0.1 is so much faster than 11.2.0.4?
  some advice for me?
  
  Thank you!

  Hello

  so I solved all my problems.

  So I made two changes:

  1. I declared the variable theNotiz2 for recording the output for the raw text of the column NOTIZ (is a clob), add the output to the Out-Clob parameter

  2. I used the same variable for the--> this blob field caused an error with line with lob is not locked... so I said a second variable for this and that solved the problem.

  normally, I think it should work with 1 variable... but is an acceptable workaround.

  Performance now is OK because the procedure, I can set on which the documents I want to do a search or not.

  Second thing, but has nothing to do with Oracle: my frontend application makes a ZIP for each insert in a column lob and if the ctxhx does not index the content, the MDC, and before calling the conversion of plain text, so I have to make a decompression of the blob...

  so for now, all problems solved. Thank you for your support.

• How to create a form that fills a page of review before being submitted?

  Anyone used Eloqua to create a form that fills a review page that the bidder has to address in order for the form to fill out?

  The sequence would be:

  1. landing page/form
  2. landing page with the data in the form of review
     • The second page with the form data will have to be approved before the presentation or the person could go back and change the data

  Thank you

  Jennifer Rash

  Hi Jennifer,.

  The way to do is to create a form with a field, mapping on a contact field you can set a value from us Let's say 1. and then on the second form, if the user access, he or she cannot present until whoever the approver is changes the value 0 (zero). Once the approval is made (assuming that anyone who needs to do this) the flag should be set to zero.

  Your form 2 form processing step can guide them in appropriate redirection, or javascript on the form page 2 can promot the user to wait for approval.

  Hope this helps... I would like to know if that's what you're looking for.

  Thank you

  Amit