E0L06UA: HP ENVY TouchSmart m6-k022dx Sleekbook

Similar Questions

• Interface SATA for HP Envy Touchsmart M6-k015dx Sleekbook

  I was just wondering if the mSATA on this laptop port are SATA III or SATA II or something else?

  envyguy3113 wrote:
  

  I was just wondering if the mSATA on this laptop port are SATA III or SATA II or something else?

  Hello

  I guess, but the mSATA is directly connected to the motherboard, so she must use the connection SATA III...

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• Envy of HP Touchsmart M6 - k022dx: network (Ethernet/WiFi) for HP Envy Touchsmart M6-k002dx drivers?

  Hi all

  Had to replace a dead hard drive and installed a new one with Windows 7 on my niece envy Touchsmart M6-k022dx. Can anyone recommend Windows 7 drivers for this model of work. I thought that I did need to get the ethernet/wifi working so that I can update the Windows 10 laptop and then install the drivers of page drivers. Any recommendation is greatly appreciated.

  Thank you

  You are the very welcome.

  See if this driver W7 IDT Beats Audio works on your model.  Install and reboot the PC.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64958.exe

• Envy TouchSmart Sleekbook: touchscreen which model do I have

  I cracked my screen. I am out of warranty. I don't remember entered touch model with my DESIRE - FHD or just the HD. How do I know if I can order the right pair? I would rather that she goes once I use the screen now

  My # is E0K41UA #ABA product

  Model: M6-K015DX

  ENVY TouchSmart M6-K015DX Sleekbook

  Thank you

  TG66

  The Specs page for your model is here:

  http://support.HP.com/us-en/product/HP-envy-M6-Sleekbook/5375391/model/5395105/document/c03785356/

• Envy of HP TouchSmart 4-1203ea Sleekbook

  Hello

  I'm looking for the update to the newest bios FRO HP Envy TouchSmart 4 - 1203ea Sleekbook

  I searched the site of HP and used the HP tool but can not find one - HP site suggests, I therefore have the most recent bios. The bios when I look at msinfo32.exe shows Date of Version of the BIOS: Insyde F.21 14/11/2012

  I bought the laptop over a year ago (sometime in 2013)

  I upgraded the laptop to windows 8 for windows 8.1

  It has 16 GB of DDR3 RAM

  Samsung 850 PRO 1 TB SSD

  Intel AC 802.11 wireless card

  Haswell i5 processor (4th generation)

  All the drivers are up to date on the manufacturers Web sites

  All the updates of windows installed

  Anti-virus and Anti-malware scans have been completed and everything is clean

  I cleaned the fan and cleaned the vents

  I disabled the fan options in the bios so that they are not always on. I also tried with fan always on.

  The fan is constantly on - according to CUPID Hardware Monitor PRO:

  temperatures are 63-68 degrees C on each core

  temperature of SSD is 40-41 degrees c

  curernt voltage is 15.93V

  I don't think it's hot particularyl?

  Would you recommend using Paste artic silver 5 on this laptop for the CPU and the GPU?

  I read a few posts on the use of a Gummy cpu / gpu paste, it seems that the general consensus is that this is necessary if the GPU or CPU is slightly raised.

  Also is it worth of replacement of pads with copper trim and adding the thermal paste after?

  I have worked in it for years and have built several computers desktop and have repaired many laptops, but would like to chcek if there is nothing else I can do before you buy a block of cooling?

  I usually use the laptop on my desk at home or at work.

  I also read a few messages to the topic to make additional holes in the case of the laptop then adding mesh to avoid that the dust is does anyone have experience with this?

  There are positions on the amendment of the fan to improve the airflow by cutting some of the envelope of the fan?

  There are fans of spare parts for laptops which are quieter or cooler?

  I appreciate there is a lot of questions here and any help would be appreciated.

  Thank you very much

  James88

  Then... the results! Temperatures plummeted to 8-9 degrees indle and at the charge!

  They cut to be in the 50s and 60 for 40 years and 50 years

  I stripped the laptop and applied new thermal paste to the CPU. Be careful when you remove the 4 screws that hold the processor, they may be a bich to go out, make sure you use the right size screwdriver and not screw them (make sure you have a spare room if you are new in this and other tools)

  My choice is the block thermal artic silver 5, which is about £5 online on most Web sites. I have used this on several laptops and desktops from the front to reduce the temperature.

  I also applied bit of electrical tape from the fan to the vent thingy (not sure what the correct name for this what) that connects the fan and the heat pipe set, I managed to reduce the tempearate of about 8-9 degrees. Normalling running under 45 degrees. The fan is now very very quiet too!

  I also discovered that the CPU is soldered to the motherboard (as I predicted). So the only way to upgrade would be to get a new Board of Directors, which corresponds to the laptop, with the specifications I and not being not a player, I don't think I'm going to need an upgrade for a while yet.

  Any questions, feel free to ask me! :-)

• 14 envy Touchsmart k074 WIFI connection

  Hi, I have an ENVY TouchSmart 14 - k074ca Sleekbook, running on Windows 8.1.

  Recently updated my Modem/Routert to a system of dual band at high speed. This router WIFI channels are in the band 2.4 GHz and 5 GHz bands.

  My Hp Sleekboog sees the 2.4 GHz signal, but he is unable to see / connect to the 5 GHz signal.

  What should I do to access these two signals/bands?

  FOR INFO.

  My old IBM laptop and IPad have no problem seeing and connecting to each signal/band.

  Thanks in advance for your answer

  Rudi

  Hi RudiL,

  I understand that you are having problems with your wireless network and your WANT from HP TouchSmart 14 - k074ca Sleekbook. You could try the rest of this paper on the discovery network and file sharing on each computer that you want to access on the network. Here is a link to this document.

  http://support.HP.com/us-en/document/c03535285

  Make sure that all of your Windows updates have been supported.

  I searched Microsoft for a fix for this and that they indicate on the forums that if you change the channel of the router to 36, this will solve the problem of connection of 5 GHz.

  Hope it will be useful.

  Thank you.

• Windows 7 on HP TouchSmart M6-n012dx Sleekbook ENVY

  Hello

  I need to know, is it possible to install windows 7 on the

  ENVY of HP TouchSmart M6-n012dx Sleekbook

  machine. While the machine is pre-installed with windows 8.

  Hello @m2star,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you are looking to downgrade from Windows 8.1 to Windows 7 on your laptop, and I'd be happy to guide you to a resolution!

  Given that the support available for your system drivers are only supported for Windows 8.1, I would personally recommend not downgrade your system to an earlier operating system.

  I hope this helps!

  Best regards

• HP Envy Touchsmart Sleekbook 4: HP Envy Touchsmart Sleekbook 4 memory update will see 16 GB of RAM

  I purc hased and installed 16 GB of RAM in both slots of memory available. Only 8 GB is visible (updated 4 GB). The HP Envy Sleekbook Maintenance and Service Guide HP Envy TouchSmart c03599931.pdf says on page 2 that the system supports 16 GB of RAM. When I go into the BIOS Setup, I can not change the amount of memory, which only shows 8 GB. How can I see all the 16GB?

  BIOS options are not editable, for those who do not help. I did remove the lower cover, reinstall the DIMM modules, and that seems to have solved the problem. Thank you!

• A computer laptop 9.5 mm HARD drive suit my ENVY TouchSmart Sleekbook 4-1115dx?

  Experts:

  I searched in the product specifications, but I couldn't find any information about it.

  A SATA 2.5 "9.5 mm HDD would fit my ENVY TouchSmart Sleekbook 4-1115dx? I ask because that installed a 7mm.

  Thank you

  Hey Icrespo,

  Just look at the specifications of design on this unit - only 7mm thick (height z) readers will fit in this unit. After all, it's a thin Sleekbook!

  7mm hard drives and SSD is easily available, and virtually all 7mm 2.5 drives "will work.

• HP ENVY TouchSmart Sleekbook 4 Sata III support

  I'm about to upgrade my laptop HARD drive and need to check the SATA III drives are supported.

  I have an ENVY TouchSmart Sleekbook 4 and I want to upgrade to a HGST 1 TB SATA III 7200 RPM HARD drive

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c03599931.PDF

  Page 1 indicates it has a Mobile Intel 7 series chipset.

  As you can see on the product, it has two SATA III ports.

  The hard drive has been connected to one of them surely HP engineering.

  http://www.Intel.com/content/www/us/en/chipsets/performance-chipsets/mobile-chipset-hm77.html

• Network keeps falling and reconnection - HP's ENVY touchSmart m6 sleekbook.

  Original title: HP ENVY touchSmart m6 sleekbook keeps falling and reconnecting network connection

  While on the website connection is deleted without warning and after a few minutes reconnects to the server used previously. The computer is new with window 8. Try to find out what causes gout and prevent it from happening.

  I had the same problem with mine.  I'm still not sure I fixed it completely, but I found that there are two network cards installed and disabling one of them seems to help.  I found it under device manager.  I have disabled the microsoft network card.  I hope this helps.  Good luck!

• ENVY TouchSmart m7-j120dx: need to upgrade tips - ENVY TouchSmart m7-j120dx

  I have the mobile suite:

  ENVY of HP TouchSmart m7-j120dx Notebook PC

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-M7-J100-notebook-PC-series/540117...

  I want to spend as a result of:
  500 GB SSD
  16 GB OF RAM

  From the following link, I discovered that the RAM should be SO-DIMM DDR3L-1600 with 1.35 volts
  I also know, I need this cable and caddy:
  http://www.Amazon.com/HDD-cable-Caddy-envy-J000/DP/B00GIGJYBG

  Now my questions,

  1. I currently have two 4 GB of RAM at 800 MHZ. If I buy a 8 GB 1600 mhz and use with one of the 4 GB of RAM I have, it's going to work?

  2. What is the maximum memory supported by my laptop? The first link, it seems to me 16 GB max.

  3. I need too amazon links for compatible RAM for my laptop for the 8 GB and 16 GB.

  4 I need also links amazon to compatible SSD drives. I'm looking for 500 GB.

  Thank you
  Jay

  Hello

  The following manual will answer most of your questions:

  http://h10032.www1.HP.com/CTG/manual/c04091762.PDF

  1. not all the RAM sticks are the same. My suggestion to use Crucial to get the right result:

  http://www.crucial.com/USA/en/memory-info

  2 Max is 16 GB as mentioned on page 2 of the manual,

  3. as #1 above.

  4. all standard SSD can do, you can see as Crucial to the right, and you can buy on Amazon after obtaining the right of Crucial.

  Finally, you need ONLY the caddy if your goal is to install 500GB SSD on the second span.

  Kind regards.

• 15 clicks Ghost Envy TouchSmart

  Hello

  I need to make this folder somewhere - thing

  My HP Envy TouchSmart E3S19UAR 15 had a problem of ghost-click with the touch screen from the first day. I did all this as recommended on these forums (and), including all updates, reinstall crushed, blah blah blah. Even sure my screen is clean and all other physical possibilities are excluded.

  The problem, like many others on these forums, comes after Windows puts the system to sleep. This happened under Windows 8.0 and continues under Windows 8.1. It goes right now.

  For some time, I thought the problem was solved - but then this weekend, my battery died suddenly. You see, in order to solve the problem, I had changed my setting of the system of 'Always On' power and changed other settings that Windows has gone to sleep. To realize that, I changed power settings back to "sleep mode"... and of course, in the awakening of his first sleep in a few months, ghost-clicks of the system started up again.

  This is why I write - I am a few hours away from my expiring warranty (it is daylight saving time of 22:00, 20:00 for the time zone apparently used here). People of guaranteed phone HP just me transferred to the support paid and was told that the warranty service would not help. The website of HP warranty, confirms nevertheless that I am still under warranty. (Yes, I have screenshots and documents printed with the stamps).

  So I intend to continue tonight if I can and certainly tomorrow (Monday) when there is hope that American support. Since I don't know how else to do this thing on the record, I post here.

  Please help, someone from hp. I'll call.

  Thank you.

  Tim C

  series 6xxxxxxxxG

  [Note: edited by OP to delete serial No. after the issue is resolved.]

  I asked the escalation of your problem. Cannot lead to any action - but at least maybe it will help with your documentation.

• Upgrade of an ENVY TouchSmart 17-j005ea

  I plan to replace my Dell with what would be my first HP laptop (a 17-j005ea ENVY TouchSmart), but I'm not sure if I would be able to upgrade.

  I'd be looking to replace one of the hard drives with a SDD and replace the DVD drive with Blu - ray burner, but I heard that the upgrade can be a problem with some HP laptops.

  These upgrades would be not possible for a person with basic experience of the PC?  (I create my own desktops and have upgraded discs and memory on Dell laptops without difficulty.)

  Depends on how you define the problem. Here's an announced a swap and go for replacement:

  http://www.eBay.com/ITM/HP-466803-501-656795-001-6x-Blu-ray-burner-slot-in-drive-envy-Omni-TouchSmart-/121233654476?PT=US_CD_DVD_Blu_Ray_Duplicators & Hash = item1c3a16c2cc

  Here is the Service Manual:

  Manual

  Page 56. Remove the service cover and screw. Drag the old drive on. Remove the cover of the old drive and pop on the new and slide in. You will need a Blu - Ray as the current version of Power DVD burning software and software Blu - Ray as the current version of Nero.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.