HOW DO I FIX MY LAPTOP TO NOT TAKE 10 MINUTES CHARGE?

Similar Questions

• How do I fix my laptop to connect to my wireless router?

  How do I fix my laptop to connect to my router wirelrss?

  Hello

  Check with the router manufacturer, their online documentation and forums support (if any). Most have
  excellent tutorials online. The router must be configured before connecting to it.

  -----------------------------------------------------------------------------------------------------------------------------------

  More troubleshooting:

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I fix the problem of not being able to open files by double clicking with photoshop

  How can I fix the problem of not being able to open files with photoshop by double-clicking it in windows Explorer?

  This problem affects psd, jpg, and png files.  I get an error saying "the program can't start because adbeape.dll is missing on your computer.  I can open all these types of files in the menu 'open' in photoshop.  It is not a matter of them not having no not extensions.  I use windows 7.

  Thank you

  Thanks for the update.

  Just for test, could you please rename Photoshop.exe to Photoshop CC2015.exe location: C:\Program Files\Adobe\Adobe Photoshop CC2015

  then change the file association to the new renamed exe file and let us know if this helps or not.

• How can I fix my laptop when he says bad image?

  I have a laptop hp mini 110 that I got from my sister when she got a new laptop.  When she gave me that she already had downloaded oovoo and Skype, but when I tried to open them they both said 'bad image' and "the application or DLL C;/Windows/system32/MSACM32.dll is not a valid Windows image. "Please check this against your installation diskette" so I was wondering how can I fix? I would really like to webchat, but it just won't let me.  Also the same thing happens when I turn on the computer first.

  If this is not the message you see, what is the message you see?

  Yes HDD = hard disk and that you need to double click on your C drive open, double-click the Windows folder that you want to open, double-click the system32 folder to open it and go see the replacement of the file as shown above.

  Now you are browsing!

• How can I fix a laptop running slow

  My computer is very slow, how can I fix

  Hello

   
  Thanks for posting in the Microsoft Community Forums.
   
  We're here to help and guide you in the right direction.
   
  View help articles below and check if it helps.
   
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=ARC9OxwwNfh
  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  
   
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=zjFH04aDtqg
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I have corrupted files as determined by SFC scan. How can I fix that SFC could not fix?

  I used a (RegZooka) registry repair tool and must have damaged some files.  At the time I discovered, RegZooka could not help me, but another suggested that I have run the System File Checker.  I did and got a newspaper that shows some of the files that it could not fix.  How can I fix them?

  Hello.

  The manufacturer's recovery disks do not normally offer the options of 'work' to do a repair Installation

  If you still have problems with files SFC cannot repair, you can borrow a DVD of visits of Microsoft from a friend of friend or work, not the manufacturer's recovery disc and try a repair installation:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Laptop will not turn on or charge

  My laptop only turns on when I press the power button. It will be not too to recharge the battery. I've had this phone for almost 2 years now, a this is the first time I have had this problem. I tried removing the battery and pressing the power for 30 seconds. I don't know if I need to replace the battery.

  My laptop is Windows 7 Home premium.

  How can I solve this problem?

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• How can I fix my laptop screen?

  The laptop monitor did not work. So the following tips attached to a monitor external and everything works well.

  the monitor of the laptop still does not work?

  Did I mention that the model number is G62-b32SA, silver. It's an intel 1.5.

  Do you have a troubleshooting on the video to see if there was a propblem. Apparently not.

  Notice of the Bios is that f37 is that correct?

  Thank you

  Hello:

  Here is the link to the the user guide for your laptop.

  It seems that the F4 key what I explained above.  Please see Chapter 3, page 32.

  http://h10032.www1.HP.com/CTG/manual/c02167128.PDF

  If that doesn't fix it, you will need to contact HP if your laptop is under warranty, because it's a hardware problem.

  Paul

• How can I fix PES-entry point not found?

  I have successfully installed PSE11, but can not open because of two warnings:

  (1) the procedure entry point HandleWindowFont could not be located in thePLUGIN.dll.

  

  2) .. Plugin "Topaz" is that is not designed to tun on windows or it conyains an error...

  

  I can probably fix the other by myself.

  How can I correct the first point?

  Try http://forums.adobe.com/message/4879888.

  "Topaz" plugins are fully compatible with PSE11. There is no need to uninstall. Just make sure that they are installed in the correct folder according to the instructions on the site "Topaz".

• How can I fix my XP do not go to Setup boot sequence

  Somehow I messed up my boot sequence and now whenever I start, he goes to the selection of the F2 to enter setup or F1 to continue.  It seems works continue, but of course, I have an error in something.

  My windows is XP

  Anyone have a suggestion on how to restore my startup?

  Doug

  The seemingly obvious solution is to hit the F2 key to enter setup and fix everything that is bad.  The BIOS settings are closely related to the motherboard and vary a lot.  Some allow re-scan devices and then save the setting.  It seems that there is a setting in the BIOS that the system doesn't seem to like when it starts.  You just need find and fix.

  HTH,
  JW

• How can I fix com surrogate does not not under Vista?

  Whenever I try to open a video file, this is the error I get, can someone help how to solve this problem in simple terms please lol

  Bunch of possible corrections here:

  Fix for COM Surrogate has stopped working error in Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

• How can I fix computer that does not start after the fan turns phase?

  I have a Compaq Presario SR5510F PC, Windows Vista Home Premium, AMD Athlon x 2. Lately, my computer is even worse at the start. When my computer starts, the fan should run for a few seconds, then it should stop and lead at the start with Compaq logo screen. But lately, the startup was completely terrible for my computer. Today, most of the time when I press the button in the box of the computer, the fan turns on and it continues to turn, and nothing comes on the screen. It isn't that rarely when the fan stops running, but then the monitor displays always upwards in white and VERY rarely when the startup screen appears, then it freezes on this screen. At this rate, my computer is totally useless when it does nothing but run his fan. This means that I can not go to boot options at all and go to the "last good configuration". What can I do to fix the computer when I can't have anything with her while she is empty?

  It sounds like a hardware problem, not a software problem.  If the computer rarely gets past the BIOS (material audit) stage of the startup sequence, then Windows is is not yet involved in the boot process again.  Request assistance from someone trained in the skills of troubleshooting hardware since this can become very expensive very quickly.

  "Maersk Custard" wrote in the new message: * e-mail address is removed from the privacy... *

  I have a Compaq Presario SR5510F PC, Windows Vista Home Premium, AMD Athlon x 2. Lately, my computer is even worse at the start. When my computer starts, the fan should run for a few seconds, then it should stop and lead at the start with Compaq logo screen. But lately, the startup was completely terrible for my computer. Today, most of the time when I press the button in the box of the computer, the fan turns on and it continues to turn, and nothing comes on the screen. It isn't that rarely when the fan stops running, but then the monitor displays always upwards in white and VERY rarely when the startup screen appears, then it freezes on this screen. At this rate, my computer is totally useless when it does nothing but run his fan. This means that I can not go to boot options at all and go to the "last good configuration". What can I do to fix the computer when I can't have anything with her while she is empty?

• How can I fix my laptop when I get this message...

  System Restore could not extract the file (C:\windows\$NtUninstalKB42823$\1421276145) the restore point. The restore point was damaged or has been removed during the restoration

  Hello

  I understand that you get an error message "C:\windows\$NtUninstalKB42823$\1421276145".

  When you try to restart your computer.

  I think that you have tried to run the system restore and everything by performing the above mentioned file system restore is not extracted from the restore point.

  Therefore, in order to solve this problem, we can proceed with the following steps mentioned below:

  1. click on start

  2. click on run

  3. Type "cmd".

  4. right click on the command propmpt and click "Run as Administrator"

  5. click Yes on the pop-up window

  6 BACK windows open

  7 type "sfc/scannow" and press enter

  Note: There is a space between sfc and / scannow

  System File Checker now verifies the integrity of all protected files of the operating system on your computer.

  8. once it is done restart your computer

  9. check if the problem persists.

  10. If the problem persists, follow the steps 1 to 6

  11. then type sfc/scannow repair

  12. it will fix the problem.

  Please perform the above steps hope it will solve the problem. I recommend you to perform above steps in safe mode with network.

  In order to enter the mode safe mode with networking:

  1 restart the system

  2. hold type F8

  3. you will get the advanced boot option

  4. use the arrow key on the keyboard and select "safe mode with network" and press enter

  Regarding

• How can I fix updates that do not update, but keep trying to update?

  5 same updates update everyday, or if it says "update successful". How updates without FRY? The updates are: KB2418241-KB983583-KB982524-KB979909-and KB982168. They are all for .NET Framework 2.0 SP2 and 3.5 SP1 except KB982168 and is for 3.5 SP1. Each of them have (x 86) at the end. It's the first time that this has happened so please forgive my ignorance. Jacob

  Error messages?

  Use them as a guide-

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  As a guide, relocation order.

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  Error code: 0 x 80131700
  Error code: 0 x 643
  Error code: 0 x 80070002
  Error code: 0x66A
  Error codes above mean that you need to reinstall Framework

  1. How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
     http://support.Microsoft.com/kb/318785
     This article explains how to determine what versions of Microsoft .NET Framework installed on your computer.

  2. How to repair an existing installation of .NET Framework
     http://support.Microsoft.com/kb/306160
     You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged. This article explains how.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How can I fix my "iDRAC is not ready' problems?

  We have a PowerEdge R420 running a server VMware ESXi 5.1 in RAID mode.
   
  We had a power failure which resulted in obtaining R420 one ' SWC0700: iDRAC is not ready "error.  Our version of setting iDRAC is 1.30.30.27.  I found the report on the iDRAC reset and update the firmware of the iDRAC with this version and error state.  Following suggestions to disconnect power cables, USB cables and then keeping the power button for 15 seconds until not clearly the problem.  Boots following this process had the same error of SWC0700.

  I created an OSMA7.1 DVD boot and I tried to install, a USB drive, different versions of newer than 1.30 iDRAC, but every time that the system has reported/proc/ipmi/0 /: file not found (or something similar that I'm going on memory here).

  I needed the system upward, so I pressed F1 to continue to run.  The system seems well except that the fans turn at high speed.

  I saw another post on the button of the iDRAC for 15 seconds to reset the iDRAC, and I tried with the system in place and is functioning normally.  This did nothing for the speed of the fan, so I guess it has no effect on iDRAC.

  I installed the COnsole of Administration Dell, on the ESXi virtual machine in the hope of launching an upgrade of firmware iDRAC of this virtual machine, but I couldn't connect to vCenter, which is probably because I don't have a VCenter server, only two servers ESXi 5.1 - I think I misread the DELL site thought this could work somehow for me.

  Now, I think the performance of the ISO bootable, I found on this Web page: www.dell.com/.../SLN296511
  My fear is that something can go wrong, and I'm losing my server installation.

  If I put my confidence in the ISO bootable update?  Should I call Dell support - I am about 4 months out of warranty repair technician on-site - and plan to replace my motherboard as I read in other posts on this forum?  The motherboard can be replaced without altering my ESXi installation?

  I'm worried that runs the server with a "iDRAC is not ready" error will burn the server, or do anything else that will ruin the server.  Should I still worry about this?

  Thanks for the advice and suggestions in advance.

  The f

  It sounds like the replacement of parts is necessary. There is not a way to export the configuration of the BIOS. The fee for a replacement of tech is usually $299 for servers, plus the cost of the system board. I'm not sure what would be an extension of one year on the guarantee.