Create new account during the deployment of the resource?

Similar Questions

• I bought a new Iphone 5 s of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none that I just

  I bought a new 5s of Iphone of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none I just an options to select Master card, Visa and Amex. So what should I do to continue without entering a those sections.

  This step must be completed before you can go to the next step in creating an App Store account. It is only for the purpose of verification and just incase accidentally make you an in - app purchase.

  You cannot create an App Store account without card number.

  I hope this helps.

  AppleMan

• Please, I initially created my account to the Brazil. However, I now live in the Panama. How can I change my account in order to correctly proceed to payment and so on? Or I have to cancel my account of the Brazil and create a new one?

  Please, I initially created my account to the Brazil. However, I now live in the Panama. How can I change my account in order to correctly proceed to payment and so on? Or I have to cancel my account of the Brazil and create a new one?

  Hello

  Please see change the country associated with your Adobe ID

  Hope that helps!

  Kind regards

  Sheena

• Transfer of account and recreate a new account for the Touchpad even WebOS

  I recently got a 16 GB Touchpad at the great firesale and have a quick question.  I would use this Touchpad for me for a little while, but I get a hand on a 32 GB Touchpad as well.  If I do, I would keep the 32 GB for me and give the 16GB as a gift to a family member.  Is it possible to transfer my account to the new device, and then delete all my data from the first device and re-register with a new account?  I have not created an account on the first device still as I am anxiously awaiting word on whether I will get the Touchpad second, but I'd really just starting to use it if it will be an easy transition to the second device!  Thanks in advance!

  Absolutely, you can.  Here's what I would do to make sure that it's going really well:

  1. on the 16 GB model, perform a backup.

  2. the 16 GB model, perform a full erase.

  3. turn on the 32 GB model and enter your webOS account.

  4. leave to set up and install all your applications.

  5 perform a backup on the 32 GB model.

  6. go online to your webOS account and remove TouchPad 16 GB.

  7 log on the TouchPad to 16 GB with a new account of webOS.

• Are windows puts an administrator account during the installation?

  Are windows puts an administrator account during the installation?  I'm the only admin user on windows, but I can't do much like I said I need admin which remove, access or open the files.

  I use windows 7

  Original title: Admin account

  You must be an administrator, because the first account you create during Setup must be an administrator-level account.  There is also a built-in account (with a current name 'administrator'), but it is disabled, unless you are in Safe Mode (restart hold F8 for safe mode).  As soon as the integrated, you can sign in and upgrade your real account on a daily basis at the level of administrator control panel.

  Note: even if you are an administrator, some processes will ask confirmation continue.  This is recommended because it prevents the virus of piracy of your profile and using your account.

• got the new ipad. during the transfer of applications, some are dark. Why?

  got the new ipad. during the transfer of applications, some are dark. Why?

  All applications are probably install and not finished yet. Make sure you are connected to a wireless network and let it enabled applications can continue to have downloaded and installed.

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• Error in creating new project to the NDP.

  

  Creating new project in the NDP, I came across the following error. How can I ressemelable this error. I have attached a screenshot.

  Please check if there is a section of configuration as below in Web\npd\web.config.

  And you have a config\Core\EqtUIModelDefinitions.xml file? If so, there could be error in there.

• Problem with 'Create new Extrusion of the selected layer' CC 2014

  Hello, I am experienced with Photoshop but I'm new to 3D text in Photoshop.  I type the text and convert it to a form.  When I choose to create new Extrusion of the selected layer I get the dialog, I don't see in tutorials.  It says "you are about to create a 3D layer.  You want to switch to the 3D workspace?  Yes/No, do not display again. "Which one should I use for the 3D text?

  If I choose Yes, all the panels disappear and the content in the tool options bar (Ribbon?) just under the menu bar disappears.  I have to restart Photoshop to get back on the tool options.  What could I do it wrong?

  Thanks - Dave

  I just chose 'No' and don't look at back.  I love my workspace, just as it is and doesn't prefer Photoshop to change for me in this case especially.

  You bring up the 3D Panel yourself via the window - 3D.  I think it's a good alternative for the Actions Panel, because I don't have any currently working in the 3D world.

  You'll want to see easily if you are working on 3D are 3D Panel and panel properties, among a few others.

  Regarding return your workspace as you like it...  Note the small switch near the upper right of the main window of Photoshop.  That can be used to select a workspace.  I suggest that you experiment and familiarize yourself with the concept of workspaces.  You can set your own and save it with a name, and that can really be useful.

  -Christmas

• broken check of email Sync feature on create new account

  broken check of email Sync feature on create new account on windows xp pro sp3 all updates were installed very old machine. Firefox is the latest version 30.0. I am trying to create a sync account to migrate my firefox profile (bookmarks, quick links, etc.) to my new windows 8.1 pro machine all installed updates. Firefox on windows 8.1 is 30.0.

  I also tried to check the Synchronization tab in the options. I know not who finally sent me an e-mail but said that the verification link is corrupted, I opened the link in a new tab to copy here: https://accounts.firefox.com/verify_email?uid=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx & code = FBI & service = sync

  any help greatly appreciated to get checked and my ultimate goal to make everything migated to my windows 8.1 pro machine.

  [personal data voluntarily obscured - please do not post this link - c]

  It may take some time before the end of the first synchronization.

  You can see these words: pages through the address bar:

  • Subject: sync-log
  • Subject: sync-progress
  • Subject: sync-tabs

• locked account. already created new account can not get anyone to help, is this noprmal?

  create new account as they say now what?

  Hello, Randy.

  You have posted to the feedback forum.  This question must be validated within the security, privacy, and user accounts... Note the drop-down menus:

  http://answers.Microsoft.com/en-us/Windows/Forum/security

  What account is locked?

  What are the mistakes you see in Event Viewer?

  http://support.Google.com/mail/bin/answer.py?hl=en&answer=43692

  Have you tried a system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• eFax 'create new account' greyed out, impossible to click on

  Photosmart 6520, cannot open efax account tab.

  Hi greysilver02,

  Welcome to the Forums of HP's Support. I see that the button "create new account" eFax is gray for your printer Photosmart 6520.

  Please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

• I deleted my Firefox sync account. How can I set up a new account on the same device?

  Now, when I open Firefox and go to tools, there is only the option "Synchronize now" rather than the "Set Up Sync" option. My account is permanently deleted, b/c "Unable to locate your account" Sync response (s) if I try to sync. How to set up a new account on this same device synchronization? Thank you.

  Hi cloudinoakland, go to Preferences > tools > synchronize and untie your device. You should then get the opportunity to implement synchronization and create a new account again.