Error in creating new project to the NDP.

Similar Questions

• Error when creating new record in the jspx page.

  Hello! I have error when you try to post the new record in the jspx page (see: http://my.jetscreenshot.com/2677/20100820-oo8z-19kb)
  
  DB I trigger and in the EO primary key attribute I Type set to DBSequence.
  
  Where is the problem and what to do?
  
  Best regards, Debuger

  @Sireesha excellent point!

  @Debugger the reason why you get the error, it is you're missing an af:convertNumber, however, as said Jean Lou, why even put a DBSequence field on your screen?

  John

• Display of the error of period q, PA when create new project

  Hi all
  
  I am facing a problem when creating a project template, although I opened PA and GL class periods, but it is still showing following error of
  
  "Impossible to copy a budget for a period that is beyond the reach of the system defined periods (e.g. PA period or GL).
  
  Please help me solve this.
  
  Regads
  Madhu

  Hello

  I guess that your budget model has periods within the date range of the model project, between the start date and the completion date of the project.

  When you copy the template to create a new project, enter the start date of the new project as the start date of the model. If your start date of the project is different from the date of beginning of the model, the system will try more end date and also, try moving the fiscal years, for those who will canned the same length, but from the new project start date. In these cases you can either create budgets in other periods and then initial budget model.

  Dina

• You can change the location of the automatic backup folder after creating a project on the first CC 2015?

  Trying to figure out from there is a way to change the location of the automatic backup folder after a project has already been created and the location of the automatic backup has been chosen. The reason for this is because we have an active work with a project that has been meet with an "unknown error" while he was trying to save on our server and also prevents form Auto-Save save projects. After you create a new project on the disk of the local computer and the Auto-Save in the same place, we decided later that we could like and the Auto-Save to live on two separate discs. I was wondering if there is a way to move the AutoSave folder without having to make a whole new project and copy everything on him. I searched through previous assignments, and even if current discussions focus on setting up an automatic backup location, I can't find all the topics related to the evolution of a current configuration.

  Thank you

  Stu-

  You just go to the project settings dialog box and change when the AutoSave file is defined.

  A couple of things about the Auto-save...

  -It waits a few seconds in action, so if you have a busy beaver editor constantly change things he could not AutoSave for quite a while...

  -automatic backup fact that both 'levels' it is wise to use Save-as to increment your project as you advance. So you can be sure that if you are on the last edit to the project AND... If corruption occurs, you have previous increments of work regardless of their deletion.

  Neil

• Get an error when creating new attributes

  Hi all
  
  I'm creating new attributes to the gift list registration form, like 'Phone number', 'City' and so on...
  All attributes are already created in the production_core and database Editions, in the dcs_giftlist table, and the new giftlists.xml file is also created, see below:
  

  <gsa-template xml-combine="append">
       <item-descriptor name="gift-list" item-cache-size="1000" query-cache-size="1000" display-name-resource="itemDescriptorGiftList">
            <table name="dcs_giftlist" type="primary" id-column-name="id">
                 <property name="clientName" data-type="string" column-name="client_name" category-resource="categoryBasics" display-name-resource="Client Name (Nome do Cliente)">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
                 <property name="emailAddress" data-type="string" column-name="email_address" category-resource="categoryBasics" display-name-resource="E-mail">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
                 <property name="cityName" data-type="string" column-name="city_name" category-resource="categoryBasics" display-name-resource="City Name (Nome da Cidade)">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
                 <property name="phoneNumber" data-type="string" column-name="phone_number" category-resource="categoryBasics" display-name-resource="Phone Number (Numero de Telefone)">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
            </table>
       </item-descriptor>
  </gsa-template>

  Although, when I try to call the attribute created on the page, such as "GiftlistFormHandler.cityName", the following error message appears:
  

  ]] Root cause of ServletException.
  CONTAINER:atg.servlet.jsp.ContainerJspException: atg.droplet.DropletResources->dropletDescriptorCantFindProper
  ty : Can't find property: clientName in class atg.projects.store.gifts.StoreGiftlistFormHandler; SOURCE:atg.dr
  oplet.DropletException: atg.droplet.DropletResources->dropletDescriptorCantFindProperty : Can't find property:
   clientName in class atg.projects.store.gifts.StoreGiftlistFormHandler
          at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:786)
          at jsp_servlet._myaccount.__giftlisthome._jsp__tag22(__giftlisthome.java:1102)
          at jsp_servlet._myaccount.__giftlisthome._jsp__tag21(__giftlisthome.java:1058)
          at jsp_servlet._myaccount.__giftlisthome.access$10(__giftlisthome.java:1032)
          at jsp_servlet._myaccount.__giftlisthome$JspFragmentHelper.invoke0(__giftlisthome.java:820)
          Truncated. see log file for complete stacktrace
  Caused By: atg.droplet.DropletException: atg.droplet.DropletResources->dropletDescriptorCantFindProperty : Can
  't find property: clientName in class atg.projects.store.gifts.StoreGiftlistFormHandler
          at atg.droplet.DropletDescriptor.<init>(DropletDescriptor.java:1368)
          at atg.droplet.DropletDescriptor.getDropletDescriptor(DropletDescriptor.java:1238)
          at atg.droplet.DropletDescriptor.getDropletDescriptor(DropletDescriptor.java:1195)
          at atg.droplet.DropletDescriptor.getPropertyValue(DropletDescriptor.java:443)
          at atg.droplet.DropletDescriptor.getPropertyStringValue(DropletDescriptor.java:245)
          Truncated. see log file for complete stacktrace

  I would like to know if there is any other xml file, that I need to change, or if I need to extend the class FormHandler, adding new attributes.
  
  Any help will be appreciated,
  
  Thanks :)

  Hi Lucas,.

  I don't see anyway decent to do this, the only way I think now is that you need to extend GiftListTools and GiftListManager and then 'find and replace' these methods that are called in your implementation. You must also override the addItemToGiftList() method in formHandler.

  In GiftListManager, you will need to override createGiftlistItem() and add the new property, you have recently added in GiftListManager and set it in the repository in createGiftlistItem().
  Ex:
  create mutableRepositoryItem and then
  mutableRepositoryItem.setPropertyValue ("propertyName", "propertyValue");
  for any properties that you want to set.
  If it works then you must override the method to get the point of filing of the database also.

  --
  Angelique

• Cannot create new projects in RoboHelp 7 HTML

  When I try to create a new project in RoboHelp HTML 7, the Type of projects field is empty on the new tab in the new project dialog box. I just bought this product after using the trial version for 30 days. I can open the projects I created before, but cannot create new projects. Help! I need it now!

  OK, this problem is solved, the problem was of RoboSource Control 3.1. I realized that I had installed RoboSource Control 3.1 during my trial installation (the installation option it is checked by default). By running again the trial download (thank God I taped it), I was able to uninstall RoboSource Control 3.1. (I could not uninstall by using the Tech Comm Suite installer or the Add/Remove feature in the control panel)

  Then I ran the installation Tech Comm Suite and reinstalled RoboHelp 7 (without installation of RoboSource Control 3.1).

  RoboHelp 7 HTML now works again. Note that only the HTML version has been screwed upward - Word version ran OK, I just don't need.

  Finally, I just want to say, Support technique Adobe * SUCKS *. After spending half an hour on my first call on September 26, "Ken" directed me to the web page of Adobe's Support and told me to enter my problem myself - thanks for nothing, Ken. He promised a tour of 24 hours around, which didn't happen.

  When I called back on 29 September, I lost another hour with Natasha and Sam, that had run me CSClean, which wiped out my registry for Acrobat and Photoshop entries, forcing a reinstallation of these products. Of course, who did not help me at all.

  Adobe, please stop outsource your Support to the India - these guys don't know anything!

  The answers to this question on the "Customer Portal" has been slow, indifferent and unhelpful. Shame on them!

  I write this fix this problem on this Forum, so the next poor slob may be able to solve their problem by themselves like I did, because the Technical Support will not help you!

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  I created a project with the first 14 and now subscribed elements trial version. However, when I open it there still the band "created with the trial version...". "in the middle of the page. How can I get rid of this?

  SAMT

  Removal of watermark Adobe Premiere elements 14 test of the project file... Open the project file of 14 trials in 14 items purchased and then first Expert rendered workspaceTimeline Menu/delete the files. Then restore the timeline content.

  You can not remove the watermark from Adobe to an export of the trial even after you bought the product.

  Some of us have found that just opening the project of tryout in removes it from Premiere Elements purchased the Adobe watermark. Determine the way that works for you.

  Please let us know if everything above worked for you.

  Thank you.

  RTA

• Problem with 'Create new Extrusion of the selected layer' CC 2014

  Hello, I am experienced with Photoshop but I'm new to 3D text in Photoshop.  I type the text and convert it to a form.  When I choose to create new Extrusion of the selected layer I get the dialog, I don't see in tutorials.  It says "you are about to create a 3D layer.  You want to switch to the 3D workspace?  Yes/No, do not display again. "Which one should I use for the 3D text?

  If I choose Yes, all the panels disappear and the content in the tool options bar (Ribbon?) just under the menu bar disappears.  I have to restart Photoshop to get back on the tool options.  What could I do it wrong?

  Thanks - Dave

  I just chose 'No' and don't look at back.  I love my workspace, just as it is and doesn't prefer Photoshop to change for me in this case especially.

  You bring up the 3D Panel yourself via the window - 3D.  I think it's a good alternative for the Actions Panel, because I don't have any currently working in the 3D world.

  You'll want to see easily if you are working on 3D are 3D Panel and panel properties, among a few others.

  Regarding return your workspace as you like it...  Note the small switch near the upper right of the main window of Photoshop.  That can be used to select a workspace.  I suggest that you experiment and familiarize yourself with the concept of workspaces.  You can set your own and save it with a name, and that can really be useful.

  -Christmas

• Create new project and a serious error occurs...

  If I try to create a new project at any time during the operation of Premiere Pro program gives me a "serious error" message and does not leading to an accident.

  I'm under Premiere Pro CS6 on Windows 7 Professional.

  Here are the details of event properties:

  Name of the failing application: Adobe first Pro.exe, version: 6.0.0.0, time stamp: 0x4f7177ec

  Name of the failed module: Premiere.dll, version: 6.0.0.0, time stamp: 0x4f7177e5

  Exception code: 0xc0000005

  Offset: 0 x 0000000000012836

  ID of the process failed: 0 x 1810

  Start time of application vulnerabilities: 0x01cf5a695cfb64c0

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe first Pro.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe first Pro CS6\Premiere.dll

  Report ID: 1cc11ff4-c65d-11e3-9f91-bc5ff4bc429e

  Don't know what other information to give, as appropriate.

  Any help would be fantastic thanks!

  'Serious error' message is far from generic for troubleshooting purposes. Jim has posted this link because the crash news that samsandwich provided reports "Exception code: 0xc0000005.»

  Crashes on launch that begin to occur after the program has run successfully, the first thing I would recommend must clear preferences. Sometimes they get corrupted such that they keep the launch program. Here is an article explaining how to clear the prefs: http://www.larryjordan.biz/premiere-trash-preferences/

• Create new project dialog - extra space generated after the prefix in LV2013

  Hello

  I'm just trying to use the new project dialog box create a LabVIEW2012 order to use the project templates.

  I would use my models from 2012 and the next versions, without having to change my code.

  But it seems that between LabVIEW 2012 and 2013, there is a small difference in the copy of the project template:

  -in LabVIEW2012: the project hierarchy is copied with the file prefix you have entered, the prefix

  -in LabVIEW2013: the project hierarchy is copied prefixed with the prefix of file you entered AND a Bangkok space empty

  What is a 'normal' behavior or just a bug? This generated empty space makes my non-functional projects...

  Is there a way to get around this?

  Thank you very much for your answers!

  We changed the addition of prefix in LabVIEW 2013 and later to add a space after the prefix. However, it does not add space if you include underscore in your prefix. Is your post copy script adding underscore everything generated code once the project created?

• Unable to create the new project for the new society without existing systems

  I'm unable to create a new project for a new society.   There is no existing systems, and I can't go beyond the selection screen.  I first put in place a new collector, registration of the database and start collections?  Or y at - there a step I'm missing?

  I found my problem.  I've been using Firefox.  This works fine in IE.  Problem solved.

• When I create a new project, why the project tab not appearing?

  After starting the tutorial on the Eagle, then create a new project, why not the project tab appears in the lower-left corner of the screen? Only the effects Media Browser Info and history tabs markers appear? As in this screenshot - please help? Thank you very much!

  Post edited by: hugoclifford

  Try resetting the workspace.

• Create new project to Phonegap Desktop

  Hi guys please help me with this.

  Im just a little confused on the creation of a new project in phonegap desktop if I need an internet connection.

  Because in my experience when I created my first project it shows me an error something like getaddrinfo ENOENT github.com:443

  Hello

  On the first run, only the PhoneGap Desktop application needs to download its templates, so it needs a connection to Github. Once it has downloaded his models, he will not need an Internet connection more.