Create new report if the file size is too large
The sequences I run in TestStand have the ability to generate large reports and I am looking for a way to start a new sequence of intermediate report if the file size exceeds certain limits, either start a new report every night at midnight.
I am currently using TestStand 2014 and reports ATML 5.00.
Here, any help would be greatly appreciated.
mattb1 wrote:
[...]I was hoping I'd be able to use some substitutions to get there, but it sounds a bit more complex than that. [...]
There is no specific substitutions that solve this problem 'in configuration and only few implementation".
The point is that you should follow the following steps:
1. check the size of the file after writing a new segment of report data.
2. If size > configured the file size, create a new file. Write a footer in the previous file, duplicate the header for the new file information and store the handle to file for all the previous files.
3. once the test is complete, update the header in all files (remember: the header contains the overall result of the ESA.) This is known only when the test is finished!) and finalize all the report files.
In the plugins default report, none of the above functions is applied.
You want may also focus on 'File offline results' as a reporting mechanism. It might be easier to change things using this approach, unless you go the recommended manner: database.
Norbert
Tags: NI Software
Similar Questions
-
I make a great conference poster that will contain images of ArcGIS. The poster will be 92 "x 42" and Imaging will cover 91 by 22 in the page. The problem is that I need very high resolution for imaging, but illustrator won't import my files. I use ArcGIS 10.3 on Windows 10 and Illustrator C4 with OS X 10.11.1 (El Capitan). I was not able to import any .tiff file into illustrator (is this possible?) and I get "cannot take place due to an error" or "the file is too big" errors when I try to put .jpeg, .png, .ai files exported from the GIS. I think that the problem is due to the differentoperating systems, rental However, can I open and edit (resize etc.) files in preview without any problem, so there is also a problem with Illustrator. The files that I use are more than 150 MB at 300 dpi, but I really prefer to use 600 dpi, Illustrator can't handle these files sizes? I don't want to lose the resolution using .jpeg, .pdf, etc., many types of compression will cause problems with vector layers from ArcGIS. Please notify!
Update your AICS4 to something with the ability to access more than 3 GB of memory RAM as CS6 or above. You'll never work with CS4, at least not to the resolution as you seem to think you need. Indeed, you could probably use 150ppi or the bottom of the poster and not obviously nothing to lose. And for the record, I worked for 17 years for the USGS working with ARCGIS and AI.
-
Hi im trying the new version of bridge and other programs, but I have the problem with the cache cause is too big. its as deck copy in other formats, all my achievements, doc, pdf, videos, photos, etc. and I loose disk space available. How can I stop this process and make it cleaner? If I clean or cache videos its more pictures in this program in a few minutes from all the elders again.
I have the same problem with adobe photoshop lightroom and elements
Hello Claudio,.
We released a new version of THE bridge bridge CC 2015 July 19, 2016. Please install from your application client creative cloud and check if the problem persists.
If bridge CC 2015 does not appear under the applications Panel, click the gear icon and select 'Search app updates' or sign out and sign back to the creative cloud desktop application.
Kind regards
Gerard
-
I'm new to Lr, can someone tell me if there is a limit of size PRACTICE to a Lightroom catalog file? Should I keep the file size within a certain range of size of GB and then create a new? Thank you I would be grateful of any advice.
He has no such limit, and in fact some users in this domain and other forums report catalogues over 1/2 million pictures works well.
The idea to create multiple catalogs because you don't want to get too big catalog file size is a bad idea that you should never think of it again.
-
Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »
I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »
HELP - I can't find a solution.
Thank you!!
Hello
1. what program you use for your design project?
2. did you run the repair of this program?
Perform System Restore on the computer and check if that helps.
-
How to create new report in 11g Server?
Hello experts,
I use fusion middleware 11g. I know in 10g
start the re [server ports such as:]
rwserver Server = repsrv1 start
same thing I want to do in 11g.
as I started the weblogic server-wls_reports and wls_forms
I'm calling the report with the following code:
{code}
DECLARE
pl_id PARAMLIST;
Temp VARCHAR2 (7);
config_path varchar2 (100);
IP varchar2 (20);
RepID report_object;
store_var varchar2 (150): ='z:\NEWTON\FAC\REPORTS\RFAC009. RDF ';
vc_reportserverjob varchar2 (100);
v_rep_status varchar2 (100);
report_job_id varchar2 (100);
BEGIN
Select trim (ip_addr) in the bms_ip_m investigation period;
IF: block_m.fromdate IS NOT NULL
AND:Block_M.ToDate IS NOT NULL
THEN
Rep: = find_report_object ('RP2RRO');
set_report_object_property (RepID, report_filename, store_var);
set_report_object_property (RepID, report_server, 'REPSRV1');
set_report_object_property (RepID, report_execution_mode, LENGTH);
set_report_object_property (RepID, report_comm_mode, SYNCHRONOUS);
set_report_object_property (RepID, report_destype, cache);
set_report_object_property (RepID, report_desformat, 'pdf');
--------------------------------parameter code---------------------------------------------------------------------
pl_id: = Get_Parameter_List ('tmpdata');
IF this is Id_Null (pl_id)
THEN
Destroy_Parameter_List (pl_id);
END IF;
pl_id: = Create_Parameter_List ('tmpdata');
Add_Parameter (pl_id, 'PARAMFORM', TEXT_PARAMETER, "NO");
Add_Parameter (pl_id, "model", TEXT_PARAMETER,: global.company_name);
Add_Parameter (pl_id, 'LOCN_CODE', TEXT_PARAMETER,: global.company_gl_locn);
Add_Parameter (pl_id, 'FROM_DATE', TEXT_PARAMETER,: block_m.fromdate);
Add_Parameter (pl_id, 'TO_DATE', TEXT_PARAMETER,: block_m.todate);
--------------------------------------------------------------------------------------------------------------
vc_reportserverjob: = RUN_REPORT_OBJECT (repid, pl_id);
report_job_id:=substr(vc_reportserverjob,length(:global.r_server)+2,length(vc_reportserverjob));
v_rep_status: = report_object_status (vc_reportserverjob);
If v_rep_status then 'DONE' =
Web.show_document ("http: / /'|: global .host |': ' |: global .port |' / Reports/rwservlet/getjobid ' |")
report_job_id |'? Server ='|: global .r_server, '_blank');
on the other
message ("error when running report" | v_rep_status);
end if;
end if;
end;
error is: unable to find the report server REPSRV1. i am new to 11g. please help me how to start report server and if i want to create the new report server with name REPSRV1 then how to create it. thanks yash
At first, component report in 11g is the same in 10g, so if your code worked in 10g then it will work on 11g.
But I think without having to create report server as what you were doing, Oracle fusion middleware already creating for report you the server and you can use it.
You can find the name of the report server in the following path:
'C:\Oracle\Middleware\asinst_1\config\ReportsServerComponent\ '.
In this way, you will find the file, which is the report server, you can use this one, named something like this "RptSvr_yourcomputername_asinst".I hope this will help you.
Kind regards
Ahmad karajh -
original title: robocopy
I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..
By pressing the "F5" key would probably be to refresh the folder.
See if this article helps you with this problem:
"List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
<>http://support.Microsoft.com/kb/823291 >HTH,
JW -
Create a folder in the file system
Quote from the old forum:
Rohan Messages: 12
Join date: Jun 2008Create a folder in the file system Posted the: July 4, 2008 06:06 Hi all I want to create a folder in the root of the blackberry device file system. Or you can say anywhere in the device file system I want to make a folder through my code. Is it not possible? How should I approach to achieve this?
Thank you
-Rohangmay Messages: 231
Join date: Jun 2007Re: Create a folder in the file system Posted the: July 4, 2008 10:53 To create directories, please see FileConnection.mkdir) http://tinyurl.com/63yj23
Gordon
BlackBerry developer journal
www.blackberrydeveloperjournal.comRohan Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 02:12 Hi Gordon,. Thanks for the reply and the link. I've been there. But I don't get the use of FileConnection.mkdir)
Can you please let me know how extract use mkdir?
Thank you
-RohanRohan
Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 04:00 Hello After trying for a while, I get it how to use FileConnection.mkdir () in my code.
But I am facing a problem here. When the mkdir() is executed, it gives me FileIOException: file system error
Here is my code that attempts to create a directory called myDir
try {}
FileConnection fc = (FileConnection) Connector.open ("file:///store/home/myDir", Connector.READ_WRITE);
If (! fc.exists ()) {}
FC.mkdir ();
}
} catch (Exception e) {}
Dialog.Alert (try ());
}I even tried to give the path like 'file:///store/home/myDir/' because I tried to create a directory. But it also gives the same exception.
Please let me know if I'm doing one any mistake here.
Thank you
-RohanRohan Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 06:10 Hello I think the problem is... BlackBerry does not allow a directory to be created in the folder /store/ the device. Because I am able to create a directory in the directory/SDCard /.
Is this something that we cannot create a directory in the root directory of the device?
Rohan Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 06:17 Hello I'm sorry to keep posting here because I'm trying various things in my code and got to know more. But I write as soon as I get a result, so that it can be useful for those who are looking for the same thing.
I even tried to create a directory in/store/home/user/and it works fine. So that means, we need to create our directories in the directory/store/home/user or/SDCard /.
Please correct me if I'm wrong.
Thank you
-Rohanyog123 Messages: 2
From: mumbai
Join date: Apr, 2007Re: Create a folder in the file system Posted the: July 15, 2008 09:49 Can someone explain this in detail...
When I tried to create the folder on the memory card or memory in the camera, it gives exception as file system error...
Is it related to any authorization or specific parameters... ??
JDE 4.2.1.16
8100 Simulator...
Thanks in advance...Please make sure that the BlackBerry Simulator has been configured to support a micro SD card. For this in the BlackBerry JDE by clicking on the menu Edition, by selecting Preferences, by clicking on the Simulator tab, then on the tab memory and filling of the size of the SD card and the SD card image settings.
Hi yog123,
The code you mentioned is valid, but I guess you make a small mistake here.
Whenever you want to create a directory, you should give "/" after the name directory to inside the Connector.open)
Just put "/" after the directory name "sp" in your code as shown below.
FileConnection fconn = (FileConnection)Connector.open("file:///SDCard/BlackBerry/pictures/sp/",Connector.READ_WRITE);
Please let us know if you still find no problem.
Thank you
-Rohan
-
Error in creating new project to the NDP.
Creating new project in the NDP, I came across the following error. How can I ressemelable this error. I have attached a screenshot.
Please check if there is a section of configuration as below in Web\npd\web.config.
And you have a config\Core\EqtUIModelDefinitions.xml file? If so, there could be error in there.
-
I'm relatively new to videos. I have incorporated a few YouTube videos on my site, but I started to play with the Prime Minister in the hope to learn to make my own videos. I wonder if someone could help me to answer a few questions about the size of the file.
A large image can greatly increase the size of the page file, in order to put a video on a page should have a huge impact. Or is the negligible impact because the video doesn't "load" until someone clicks on it?
When someone plays a video, it probably uses a lot of bandwidth.
So it occurred to me that the obvious solution to the file size band bandwidth problems and probably is bandwidth. Instead of hosting videos on my sites, I could upload them to YouTube and then embed them on my web pages.
If I use this strategy, which would help a lot in terms of use of bandwidth and page load time?
Maybe I should have put my question this way: what are the advantages and disadvantages of video hosting on your site rather than publish them on YouTube? I guess that I retain the copyright for all the videos I put on YouTube.
Thank you.
If played from YouTube or your own web server, the file size of the video will not add anything significant to the size of the web page. They are simply text files, very small in comparison. Adding a video is a few lines of code pointing to the reading software and the video file itself.
If you host the file on your own server, then the bandwidth will count towards your monthly totals, while only hosted on YouTube, he obviously won't. But the web page itself will not change much in size.
Don't know or the other of these issues matter much, however. You can get hosting packages unlimited bandwidth for $100 / year, maybe less.
Copyright is another problem. YouTube will take down or limit some videos under certain conditions. (And these days, not all these conditions are fair and appropriate under the U.S. Copyright Act). Their accommodation on your own site, this isn't a concern. (However, it does not necessarily legal, either.)
-
DBA dear friends,
I use below syntax to export a schema, using the file size to limit the maximum size of each dump file to 50G.
expdp dumpfile=soa._%U.dmp filesize = 50G = DPP patterns parallel soa = directory = 4 logfile = soa.log
I see one of the files has exceeded 90GB and continues to increase, his writing to 4 files at the same time, but has not yet created a 5th file. I would be surprised that this file > 90 GB more? Appreciate your thoughts
Thank you
925414 wrote:
DBA dear friends,
I use below syntax to export a schema, using the file size to limit the maximum size of each dump file to 50G.
expdp dumpfile=soa._%U.dmp filesize = 50G = DPP patterns parallel soa = directory = 4 logfile = soa.log
I see one of the files has exceeded 90GB and continues to increase, his writing to 4 files at the same time, but has not yet created a 5th file. I would be surprised that this file > 90 GB more? Appreciate your thoughts
Thank you
It seems that he does not know the size of the FILE when you incorrectly specify.
It could work differently & better for you as a FILESIZE = 50 GB
-
How can I reduce the file size?
Hi all
I'm running into a bit of a problem here, and I can't find a workaround. I was hired to create a few small icons for a TeamSpeak 3 channel and my files must be 16 x 16 pixels and under 8 KB size, otherwise TeamSpeak will not accept the picture.
I don't want to degrade the quality of the icons that I made, and the smallest I could get the file size was 16 k with 10 KB for JPG and PNG. All the icons are color. I can get a few simple icons to fall under 8KB, but there are a few others that I can't.
What is the best way to reduce the size of the file on the small photos, and how to get the file size less than 8 KB? TeamSpeak seems to accept any image format, so pretty much everything is allowed. This one is over my head when it comes to small technical details.
Thank you in advance! (:
Open the Image in Photoshop, change the size or pixels according to the requirement.
Then save for web on the file menu.
You can choose the JPEG format.
Let us know if it helps.
Kind regards
~ Mohit
-
Why can't I reduce the file size of virtual disk?
Workstation help 8.0.4, why is the file size of virtual disk for my more bigger than the amount of space used within the instance instance?
The instance (Windows 7 Ultimate 32 bit) HARD drive is 40 GB... He is currently using 28.6 GB of this space.
But the hard for instance file is 34.5 GB size - it is more than 20% larger.
I defragmented the drive on the instance.
I defragmented and compacted file hard (via the 'vmware-vdiskmanager' command line utility)
I defragmented the host drive.
Any not really - I'm just curious as to why I can't get it down to a smaller size (mainly to speed up backups)
Narrowing of a virtual disk is done in two steps. Unused disk space must first be cancelled in the comments, what OS, then blocks not null the hard are copied to a new file hard. With VMware Workstation 8, you can start this process in the VMware Tools window (right-click the icon in the system tray)
André
-
Library: Can I display the file size? Can I import namesake twice?
Hi, I have two questions regarding the use of Lightroom:
- Can I display the file size under a thumbnail and I can sort the images by file size? In my view, this is not possible. (Knowing that "Megapixel" is a criterion.)
- Is it possible to import images with identical names twice, when they are duplicates in different folders? In my view, this is not possible. I believe that you must rename the images in a folder until you can import it again. I believe that you can import only a file name, once, even if the second file is in a different folder.
Am I wrong?
Are there other simple things that miss you?
Thank you.
You can import a picture with a duplicate file name - just see the file management section in the right of the Module to import Panel and deselect the option that says "don't import suspected duplicates."
Given that I work with multiple cameras and some of them turned on back to the "0001" in their file numbering sequence, (and new cameras go back to 0001), I have duplicate names stored throughout my catalogue. Or, at least, I did until I started my files to import with a sequence of name custom including the date of name change.
HD ++
Maybe you are looking for
-
Audio examples and vibration - activate or not?
Hello I am a student and I use the evaluation version of LV I am playing with audio examples and vibrations, but I don't see the block diagram only the façade. It says to activate LV. Need to activate the OAS tool to see examples block diagram or is
-
PC laptop Pavilion 15: how to access the hard drive of a PC pavilion 15 laptop
I can't remove the cover from below even after the removal of all the obvious screws and so I can not replace the hard drive
-
Canon PowerShot SD1200 IS digital camera 10MP - Communication error
Recently the camera communicates more with one of my computers (one is 32-bit, the other is 64-bit). When I connect the camera, it displays a message that says: ERROR of COMMUNICATION. I tried using a different USB cable, but it does not help. Rec
-
Installation of the SDK however Webworks fails on Windows 8
I don't know why I tried this, but here's the screenshots of the error messages that I get during installation. I don't know if it is a Java issue or something with SDK Webworks or is it even supported on Windows 8?
-
Adobe dot Com resource who say free, but are not...
I was updating my Muse sites today and I clicked on several 'free stuff' that to go to a 3rd party website that doesn't let you download without membership and pay money to do... I don't have a problem with that, except for the part that says on the