Create sequences inside a trash can

Similar Questions

• Why can not see the waveform audio timeline on sequences inside another sequence in Premiere Pro CS6? Can I fix?

  Anyone know why I can't see the waveform audio timeline on sequences inside another sequence in Premiere Pro CS6? Can I fix?

  Hit the Audio rendering.

• How good my trigger & Create Sequence are written review my excerpt from PL/SQL

  I have a CustomerHistory table.
  
  Here's a sequence I created for the table:
  

  CREATE SEQUENCE customerhistory_id_seq
  START WITH 90
  INCREMENT BY 10
  MAXVALUE 90000
  NOCYCLE
  NOCACHE;

  I created a trigger example the primary key of the history table:
  
  

  CREATE OR REPLACE TRIGGER cushistory_bef_insert
  BEFORE INSERT ON CustomerHistory
  FOR EACH ROW
  BEGIN
        SELECT customerhistory_id_seq.NEXTVAL INTO :NEW.CustomerHistoryID
        FROM DUAL;
  END;
  /

  After each update, or delete, insert the old record in the history table:
  

  CREATE OR REPLACE TRIGGER cushistory_aft_upddel
  AFTER UPDATE OR DELETE ON CUSTOMER
  FOR EACH ROW
  BEGIN
        IF UPDATING THEN
              INSERT INTO CustomerHistory
                       *
              (
                   SELECT
                           :OLD.c.customerID,
                           :OLD.c.firstname,
                         :OLD.c.lastname,
                         :OLD.c.email,
                           .
                           .
                           .
                           :OLD.mr.roomtype,
                           .
                           .
                           .
                           :OLD.b.checkout,
                           'UPDATE',
                           SYSDATE
                 FROM Customer c JOIN CustomerFamilyMember cf ON c.customerID = cf.customerID
                       JOIN Phone p ON c.customerID = p.customerID
                       JOIN ThirdParty t ON c.thirdpartyid = t.thirdpartyID
                       JOIN BookedRoom b ON c.customerID = b.CustomerID
                       JOIN MotelRoom mr ON b.roomID = mr.roomID
                       JOIN Motel m ON mr.motelID = m.motelID
            );
       
        ELSIF DELETING THEN
        
              INSERT INTO CustomerHistory
                       *
              (
                   SELECT
                           :OLD.c.customerID,
                           :OLD.c.firstname,
                         :OLD.c.lastname,
                         :OLD.c.email,
                           .
                           .
                           .
                           :OLD.mr.roomtype,
                           .
                           .
                           .
                           :OLD.b.checkout,
                           'DELETE',
                           SYSDATE
                 FROM Customer c JOIN CustomerFamilyMember cf ON c.customerID = cf.customerID
                       JOIN Phone p ON c.customerID = p.customerID
                       JOIN ThirdParty t ON c.thirdpartyid = t.thirdpartyID
                       JOIN BookedRoom b ON c.customerID = b.CustomerID
                       JOIN MotelRoom mr ON b.roomID = mr.roomID
                       JOIN Motel m ON mr.motelID = m.motelID
            );
       
        END IF;
  END;
  /

  1 are structured correctly 3 pl/sql code snippets?
  2. in the last example, which is an alternative using the JOIN? If know join 5 tables is not a good
  long term solution. Any idea?

  Hello

  Here are the bugs I find in your code.
  Please view the description of test table and features for more information.

  1 cushistory_aft_upddel is a level trigger line on client.
  Querying the table inside the trigger would give the error table mutation.

  ERROR at line 1:
  ORA-04091: table XXXXX.CUSTOMER is mutating, trigger/function may not see it
  ORA-06512: at "XXXXX.TEST_TRG", line 2
  ORA-04088: error during execution of trigger 'XXXXX.TEST_TRG'
  

  The only way you can acccess them using: old.col_name and: new.col_name.

  2 table the customer is the only updated and so the new and the old mke sense only for the customer table. the old.b.col_name and old. XXX.col_name for all other tables mean nothing and will result in error;

  Here is an excerpt of small test with tahe customer table and another table called check_in. You can extend the same thing for your problem.

  sql> create table customer(
    2    cust_id number,
    3    cust_name varchar2(20));
  
  Table created.
  
  sql> create table check_in(
    2    cust_id number,
    3    check_in date,
    4    check_out date
    5  );
  
  Table created.
  
  sql> create table cust_history(
    2    cust_id number,
    3    cust_name varchar2(20),
    4    check_in  date,
    5    check_out date);
  
  sql> insert into customer values (100, 'Rajesh');
  
  1 row created.
  
  sql> insert into customer values (200, 'kumar');
  
  1 row created.
  
  sql> insert into check_in values (100, sysdate-2, null);
  
  1 row created.
  
  sql> insert into check_in values (200, sysdate-3, null);
  
  1 row created.
  
  sql> commit;
  
  Commit complete.
  
   create or replace trigger test_trg
   after update on customer for each row
   begin
     insert into cust_history
     select :old.cust_id,
            :old.cust_name,
            ci.check_in,
            ci.check_out
       from check_in ci
       where ci.cust_id = :old.cust_id;
   end;
   /
  
  sql> select * from customer;
  
     CUST_ID CUST_NAME
  ---------- --------------------
         100 Rajesh
         200 kumar
  
  sql> select * from check_in;
  
     CUST_ID CHECK_IN  CHECK_OUT
  ---------- --------- ---------
         100 25-DEC-09
         200 24-DEC-09
  
  sql> select * from cust_history;
  
  no rows selected
  
  sql> update customer set cust_name = 'Rajesh2' where cust_id = 100;
  
  1 row updated.
  
  sql> commit;
  
  Commit complete.
  
  sql> select * from customer;
  
     CUST_ID CUST_NAME
  ---------- --------------------
         100 Rajesh2
         200 kumar
  
  sql> select * from cust_history;
  
     CUST_ID CUST_NAME            CHECK_IN  CHECK_OUT
  ---------- -------------------- --------- ---------
         100 Rajesh               25-DEC-09
  

  You can use the other tables to select as I used the check_in above. You don't need to access the customer table that you have values in the: old. and: new. variables for them.

  Thank you
  Rajesh.

  Published by: Rajesh Chamarthi on December 26, 2009 21:30 added example.

• insufficient privileges when you create sequence using the procedure

  CREATE OR REPLACE PROCEDURE schema1.proc1 AS
  BEGIN
  EXECUTE IMMEDIATE 'DROP SEQUENCE schema1.add_ins_seq';
  EXECUTE IMMEDIATE 'CREATE SEQUENCE schema1.add_ins_seq MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 1000 NOORDER  NOCYCLE';
  END;
  

  This procedure is created to schema1 by schema1.

  Schema1 boasts a CREATE SEQUENCE privilege.

  When I run this procedure through SQL Developer after the Cup to schema1, the error is thrown in insufficient privilege to CREATE SEQUENCE, however, DROP SEQUENCE is executed. I can create the sequence without the procedure call.

  If I add AUTHID CURRENT_USER so I don't get the error of insufficient privileges.

  Why it gives this error when the owner and the applicant of the procedure is schema1?

  Hello

  1st thing to know: when a procedure is defined (and updated), any privileges granted through ROLE is not taken into account. This is because these privileges can be active or not at the level of the session (as happens if for example a user has active 'role A' in session 1 but not in session 2 and if this role has been used to define a procedure?) The proecedure must at the same time be VALID in session 1 and INVALID session 2? Is not possible.

  Thus, for instance in a situation of 'standard': user SYSTEM has 'DBA Rôle', so you can for example make a sqlplus session "SELECT * v $ instance;", but you would write a procedure owned by system making instance_name SELECT INTO l_variable OF v$ instance;  "then"surprise": the procedure cannot be compiled because of the ORA-904 Table or view does not exist..." To be able to create the procedure, a DSS system needs to be done.

  2nd thing for your special case, a little more complex: default for a procedure is 'AUTHID DEFINE', but once more: it means "privileges of the author creating the procedure", so without taking into account the acquired privileges through roles... Your user name is 'sequence create' through a role, it cannot use the privilege within the procedure.  But... but when you define the procedure with AUTHID CURRENT_USER, privileges are evaluated at run time, and thanks to the active ROLE in the session by calling the procedure, at this time, the user can create the sequence.  If try again you but with 'The VALUE NONE ROLE' in the session before the call, you will again have the question.

  Conclusion: If you need to do the action, you must grant the user the necessary privilege directly.

  Best regards

  Bruno Vroman.

• Scripts customized transformations: creating sequences and synonyms

  Is there a way to Data Modeler to describe the process of creating sequences and synonyms. I have already found how to create columns in a table, but it is also possible to create sequences and synonyms for tables? I watched it in the XML metadata, but I have not found where I was looking for? Can someone help me?

  Support more will be included as part of the XML meta data in the next version.

  Philippe

• ORA-02289 delete and create sequences to help to run immediately

  Hi all
  
  I copied a schema of one database to another.
  In the former base my package works very well and the procedure inside the PKG_REFRESH package below works like a charm.
  
  PROCEDURE FILL_TABLE(P_PROC_ID INTEGER) AS
  BEGIN
  EXECUTE IMMEDIATE (' drop sequence sq1' ");
  EXECUTE IMMEDIATE (' create the sequence sq1 with cache of 1 500 ft);
  v_kenmerk: = 'dim_1 ';
  INSERT INTO dim_1)
  Field1
  Field2
  ... < snip >
  END;
  
  Now that I have imported the package in a different database, and while footage used by inside the packaging procedures exist, it gives the errors below:
  
  Start
  *
  LAUGHING at regel 1:
  . ORA-02289: sequence does not exist
  ORA-06512: at "OWNER. PKG_REFRESH", line 117
  ORA-06512: at "OWNER. PKG_REFRESH', line 80
  ORA-01031: insufficient privileges
  ORA-06512: at "OWNER. PKG_REFRESH', line 20
  ORA-06512: at line 3 level
  
  I checked and the sequence is abandoned, but has not been recreated. However, it only gives me an error message when you try to create the sequence.
  I'm puzzled... search this forum, google and metalink did not help me either.
  
  Does anyone have an idea why this is happening? Strange is that it does not work on the old database.
  
  Robin
  
  Published by: RobbieNerve on June 30, 2011 10:27 I forgot to say that the procedure is inside the package

  Try to give an explicit subsidy to the user:

  GRANT CREATE SEQUENCE TO OWNER;
  

  Max

• ORA-01031 on create sequence with Execute Immediate

  I have the following statement in a procedure:

  EXECUTE IMMEDIATE
    ' CREATE SEQUENCE my_seq
      INCREMENT BY 1
      START WITH 130224
      NOMINVALUE
      NOMAXVALUE
      NOCYCLE
      NOCACHE';

  When the statement is executed, I get an ORA-01031: insufficient privileges error.
  
  I can run the CREATE statement in sqlplus. The schema from which I executed the CREATE statement is the same as that under which the procedure is run. In addition, the procedure is also created in the same schema.
  
  What a privilege I'm missing?

  Your privilege CREATE SEQUENCE given to you through a role.

  Roles are not considered in the stored procedures, you must have the privilege granted directly to your user name.

• I can not find the deleted messages in the trash can I have with outlook express

  I am unable to find the deleted messages in the trash can as I could when using internet explore how do I do in mozilla?

  
  

• Empty the trash CAN´t

  Hi all

  I have the following problem:

  I have some files in the trash can´t be deleted. When I try to empty the trash, I get the message... Cannot delete because the files are in use. File names contain non-standard characters, but I could rename their 'a', 'b' and so forth, then the files were deleted, files not - they are still displayed. On the terminal that they (folders!) do not appear, that is, the command "ls - al 'displays only the default directories'. 'and'.. 'in the folder'.» The basket", but the Finder displays the directories.

  When you start in safe mode the Finder displays an empty the trash (?). I have tried almost everything, including:

  • "chflags-r nouchg" and tips on the Apple web page
  • rm - rf ~ /. Trash / * (in combination with sudo)
  • Remove ".". Basket"and made a new folder. Trash
  • etc etc.

  far "files from the Recycle Bin" in the "." Trash"are still alive when to start normally. Does anyone have an idea of what has past and how can I get an empty the trash can again?

  Greetings from the Germany

  Mike

  Please, open the Recycle Bin and select the items that you cannot delete. Make a right click or Ctrl-click. In the context menu, select

  Delete immediately...

  Confirm when prompted.

• I accidentally deleted my trash CAN... what should I do?

  original title: deleted stuff by accident.

  I accidentally deleted my trash CAN... and do not know how to get back... what should I do? If you can send me an email to * address email is removed from the privacy * to tell me that would be great thank you.

  Daniel

  Hello Daniel,.

  The trash is called trash. It is easy to restore the Recycle Bin on your desktop:

  In the Vista Start menu search window, type customization and click this item in the results, or press ENTER.

  On the upper-left corner of the page, click on Change desktop icons.

  Now, click on the box next to the item from the Recycle Bin to add a check mark.  Click OK and exit the control panel.

  Mr. Doug in New Jersey

• When a right click to create a new folder, I can't see the new option 'file' in the menu. Why?

  I'm running Win 7 Ultimate and it happened on my system for the first time: when a right click to create a new folder, I can not see new option 'file' in the menu.
  I remember that I did not create new records from the last 5 days, so I can't say when the problem came. But I remember that yesterday I uninstalled 'free. '
  antivirus application which disappointed me a little. And it was the only action I suspect to have effect on my system.
  So I can't create folders in the usual way. And I need help to solve the problem. Moreover, the cmd command line works and when I type:
  MD x:\AA,
  The result is a folder named AA at the root of drive x:

  Again, I ask for help.
  Thank you
  Chris

  Hello

  Go to the following site.

  File Association fixes for Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/

  In the blue box, click on the item in folder and download the file to your desktop.

  Unzip the file.

  Double-click the folder_fix_w7.reg file to add the information in the registry.

  In the meantime, you can also use the keyboard shortcut to create a new folder.

  Just press Ctrl + Shift + N.

  Concerning

• I created a vpn connection, but can I create a shortcut to connect every time?

  I created a vpn connection, but can I create a shortcut to connect every time?

  I created a vpn connection, but can I create a shortcut to connect every time?

  Open network and sharing Center, go to the Edit card settings window and drag the VPN icon on your desktop.

• "Create Sequence statement" simple giving ORA 00604,06502 and 00955 while giving only 00955 in another environment

  Hello

  We have two Oracle 11 g R2 databases hosted on the AIX platform and running the same 'create the sequence' gives me different error messages

  Create sequences "IDS_B88E01_SEQ" START BY INCREMENT of 1 BY 1; 

  
  

  1 database

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Second time in a row below "create the sequence" statement gives me AN error message

  ORA-00955 - name already used by an object existing.

  Database 2

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Second time in a row below "create the sequence" statement gives me FOUR error messages

  ORA 00604 - an error has occurred at the SQL level recursive 1

  ORA-06502-pl/sql: digital error or value

  ORA 06512 - line 11
  

  ORA-00955 - name already used by an existing object

  
  

  
  

  Will there be other parameters in the database that you might be aware that leads to the different exception handling?

  I really need a mechanism which will be generic to the environment of exception handling
  

  It will be a ddl after initiation... Triggering event will be 'DDL '.

• Hello, I created an account but I can not install the application, I need to maybe purchase did not package I chose was the students what I do?

  Hello, I created an account but I can not install the application, I need to maybe purchase did not package I chose was the students what I do?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.