Create the custom field on vm creation

Similar Questions

• How long does it take for the custom field created in SFDC appears in the list of field mapping?

  How long does it take for the custom field created in SFDC appears in the list of field mapping? I hit the refresh field button, but it does not appear after 5 min. I just need to have patience?

  I had the same problem yesterday, I think it took about 10-15 minutes to appear.

• Background color of the custom field

  Hello

  I create a custom field that is as shown in the attached display a bar graph.

  

  I don't want to change the background color of the field of another color. I tried to overridding method paintBackground of the field as shown below:

  protected void paintBackground(Graphics arg0) {
          arg0.setColor(Color.DARKGRAY);
          super.paintBackground(arg0);
      }
  

  but it seems to have no effect. Could someone kindly help me with this. Thanks in advance.

  Kind regards

  S.A.Norton Stanley

  Try this...

  Create a class that extends the scope and implements DrawStyle

  and override its Paint method... to set the background color

  Draw the shape you want with the graphics object and either fill the area or set the background color.

  THX

  Rabi Ray

• Question regarding setExtent and getPreferredWidth for the custom field

  I am trying to understand the difference between getPreferredWidth and setExtent, which relate to the width of a custom field.

  I create a field that may be greater than the width of the screen. The field is made up of cells (for example columns and lines or cells, such as a table). The cells contain text, shapes, lines, color, etc. When I display the field I only paint the visible columns on the screen and allow the user to use the trackball to accomplish the columns out of the screen.

  At present, getPreferredWidth returns the total width of the field without all the empty columns, is longer than the width of the screen. I use the same value in setExtent for width. GetPreferredWidth must return the size of the field that is painted on the screen - the total width less the width of the columns out of the screen? I have the same question about setExtent - width either in total, longer than the screen width or the width of the part of the field that is painted on the screen?

  If I use the width of what is painted on the screen or the other of these methods, then the width changes when the user scrolls through the field. As the user scrolls, I calculate the number of columns will agree to a width of the screen and paint these columns. Is it a problem to have the PreferredWidth and the setExtent change width? I read that setExtent is called only when the Manager sets this field, so that the changes will not be recognized.

  It seems to work in two ways in a few simple tests, but I was just curious as the value of width that is right.

  Thank you!

  Mark

  When a field has changed in a way that requires the update of the screen (for example, after scrolling offset changes), simply call invalidate() from this area. That will eventually lead to paint (Graphics) for the field. At this point, you return the update field. (If only part of a field - as a single cell - needs to be updated, there invalidate() versions that accept arguments where, for efficiency, you can limit the update for just this part.)

  If I understand your needs, you can achieve the effect desired in the paint method. You can use the current dimensions of the field, the cutting of the graphics area, and your internal roll compensates to decide what to paint and what to delete. Let your custom field leave white space where you decide of doesn't make is not part of a cell. There is no need to change the scope of the field.

  If you go about it by changing the dimensions of the field, and then you ask the system to play much more work he has to do. If the custom field is the only field on the screen, it won't make much difference in the behavior (although there may be performance). With more than one field, it can be weird effects. For example, suppose that your custom field is one of several fields in a HorizontalFieldManager and you change the field width. When the HorizontalFieldManager recalculates its own layout, it will change the horizontal position of the fields to the right. The effect on the user, I think, would be really confusing: as the custom field parade, parties to the right of the screen could bounce left and right as the changed width field. I can't imagine that's what you want.

  Here's another way to think about this: absent some bit of style, your custom field would prefer be exactly wide and high enough to show all without scrolling. So the width and height would be based on adding the appropriate cell widths and heights, regardless of what actually is on the display. (It's also a long time that you do not have something fanciful.) If the optimum height is a function of the width available - as with sheathed on the line of text - you would implement this logic in the layout method. You then have no use for autonomous preferred width and height).

• Two sliders in the custom field definition

  Hi guys,.

  First of all, I want to thank all those who helped me to this day. This forum has been essential for blackberry dev work I do, and I would be screwed without you guys. That being said, I'm having a problem. I install a custom like this text entry field.

  (1) creates a vertical field Manager, assigned a background and resized image with setExtent(). (works fine)

  (2) created a new type of field and inserted in the vertical field Manager to make native look (almost works)

  The problem I have is that two sliders are appearing. Cursor #2 is dynamically updated as it should be, but the #1 cursor seems to be a "flawed slider. Please see the image below for details.

  

  The custom field is defined using the following code. If I remove the custom field, or cursors comes, so I am positive that it is the source of the problem.

      public class JustifiedEditField extends HorizontalFieldManager implements FieldChangeListener {
          BasicEditField ef;
  
          public JustifiedEditField(long style) {
              super(USE_ALL_WIDTH);
              ef = new BasicEditField(style) {
  
                  protected void onDisplay() {
                      setPosition(10, 17);
                      update(0);
                      //invalidate();
                  }
  
                  protected void update(int d) {
                      super.update(d);
                      setPosition(10, 17);
                      //invalidate();
                  }
  
                  protected void paint(Graphics graphics) {
                      graphics.setColor(Color.WHITE);
                      getFocusRect(new XYRect());
                      drawFocus(graphics, true);
                      super.paint(graphics);
                  }
  
                  protected void onUnfocus() {
                      invalidate();
                  }
  
                  protected void onFocus(int direction) {
                      invalidate();
                  }
  
                  /**
                   * Intercepts ESCAPE key.
                   * @see net.rim.device.api.ui.component.TextField#keyChar(char,int,int)
                   */
                  protected boolean keyChar(char ch, int status, int time) {
                      switch(ch) {
                          case Characters.ESCAPE:
                              // Clear keyword.
                              if(super.getTextLength() > 0)
                              {
                                  setText("");
                                  return true;
                              }
                      }
                      return super.keyChar(ch, status, time);
                  }
              };
              add(ef);
          }
  
          protected void sublayout(int width, int height) {
              super.sublayout(width, height);
              setExtent(width, 57);
          }
  
          public BasicEditField getEditField() {
              return ef;
          }
  
          public String getText() {
              return ef.getText();
          }
  
          public void setText(String value) {
              ef.setText(value);
              invalidate();
          }
  
          public void setChangeListener(FieldChangeListener changer ){
              ef.setChangeListener(changer);
          }
  
          public void fieldChanged(Field field, int context) {
              invalidate();
          }
      }
  

  I am totally stuck on this issue, any help would be really appreciated. TIA!

  I came up with an alternative solution. It turns out that I can use a transparent border to set the offsets to where the edit field must be located within the input Manager; thus eliminating the need to use setPosition.

• Helps with the syntax of the workflow for the custom field

  I created a custom field called 'qualified Date '. Our current workflow is at work,
  
  (PRE ("< SalesStage > '") <>[< SalesStage >]) AND (PRE ("< SalesStage >") = 'Lead')
  
  The goal is that whenever the opportunity is taken from the stage of lead, it is called.
  However, I don't want the full qualified date when a lead is moved to Closed/Lost.
  
  Any suggestions on how to change this workflow to make that happen.

  We have a similar workflow, and we use a slight variation of what has suggested Shilei.
  PRE ("< SalesStage > '") <>[< SalesStage >] AND PRE ("< SalesStage >") = 'Lead' AND FieldValue ("< SalesStage > '") <>' closed/lost '.

  Good luck
  Thom

• I can't create the custom toolbar

  Whenever I try to create the custom toolbar, it disappears after you restart Firefox. Can you suggest me a solution for this?

  Thank you!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  What security (firewall, antivirus) software do you have?

  Some security software has virtualization or sandbox features that can cause problems to protect and restore files in the Firefox profile folder.

• How can I display the custom field in Office Communicator so that everyone can see?

  In OCS, on your personal page, there is an option for the current location - create the custom location, I want to display the "custom" location instead of the busy, can someone help on how it works?

  Hello PK,.

  This forum is the right forum for this type of question:
  http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads

• Part of the cursor remains in the custom field

  Hello, guys!

  I have a problem.

  In the custom field that extends EditField, I want to draw in the text and the image and draw an appropriate in the cursor position. Then, we thought it would only calculate in advance of the police and the width of the image in the paint method to display the text and image and to the similar development and I tried. However, the cursor drawing is wrong. When the cursor moves from right to left, a part of the slider to the position immediately before the rest.

  Y at - it a good solution?

  JDE component package: 4.6.0

  I solved by myself.

  'FocusChangeListener' is mounted with EditField. And "invalidate()" has been called in the method "focusChanged().

  It became a great result for me.

  Thank you.

• Automate snapshots based on the custom field

  I am a newbie to scripting and can't creating a Powershell script that will automatically create snapsht based on a custom attribute that is specified on the virtual computer. I got so far:

  Get - VM | Select the custom name fields - ExpandProperty | Where {$_.value - eq "takesnapshot"} | Select name

  This gives me a list of virtual machine names that have the specified "takesnapshot" custom field, however, I don't know how to use the output with the Get - VM | New snapshot command to create a new snapshot. Any help would be appreciated.

  OK, the key is "Ministry" and the value is "instant".

  With the attached line, you should get in the market.

  Your test had a few typos: it should be $_ and you should leave out the test to white before the brackets.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Adding to the custom field hyperlink _blank

  Hello

  I set up a custom field type = LIEN_HYPERTEXTE, this load an anchored in my text. By clicking on this hyperlink opens a new window of the browser as with target = _blank. I can add this property to the tag somehow, like {tag_customfield, _blank} or something?

  Best regards, Dennis

  Nope. You can do it with javascript or a text field and create your own link.

• Cannot create the custom menu item

  I feel that I'm missing something simple here.  Use the examples in the documentation for the BB developer, I am unable to get a custom menu item is displayed on a BB application menu in a simulator.

  More precisely:

  I copied the code for ContactsDemo (on page 31 of the PDF Advanced Developer) subjects, and works very well in the Simulator.

  I then copied the code for DemoAppMenuItem (from page 86 of the same doc).  It seems to work very well - no errors, and it appears in the Downloads folder on the Simulator.  But no custom menu item appears on the simulator when I create a new Contact, and then return to view it.

  I have all three options checked in Workspace Blackberry > Blackberry JDE > Code signing.

  My environment is:

  Eclipse 3.4.2

  BlackBerry JDE plugin 1.0.0.67 Eclipse

  I tried it with two simulators 4.5 and 4.6.

  Any suggestions are greatly appreciated!

  Thanks for the references page - this is a great compilation of resources!

  I don't know why the sample code of the documentation of EDGE does not work, but I was able to get the custom display menu item using the code I found this message on the forum.

• Drawing Bitmap on the custom field

  If I have a custom component that extends the scope I am able to draw Bitmap on it?

  I try to shoot in object overrided method in this way.

   protected void paint(Graphics g)    {         Bitmap = Bitmap.getBitmapResource("test.bmp");        if(picture != null)            g.drawBitmap(getPreferredWidth()+5,                          getPreferredHeight() + 5,                          picture.getWidth(),                          picture.getHeight(),                         picture,                          0,                          0);
  
      }
  

  But no picture on my component.  Specified test.bmp exists as a resource and object Bitmap appears correctly. No exceptions occur.

  Any comments? Maybe it's impossible to draw a bitmap on component expanded in such a way?

  Thanks in advance.

  Thanks for your suggestion. The problem wasn't in extention but in the region of destination, top and left. X and there were calculated with respect to the top and left of the main screen instead of top and left of the custom my field.

  Your message dropped a hint on how to survey. Thank you very much!

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• Create the custom using elements of Page filter

  Hello

  I am trying to create a custom of sorts using page elements filter date picker.

  I want a report to have a where clause clause that says something like this:

  WHERE the table. Date >: P1_Date1

  AND the table. Date..: P1_Date2

  I need to do it this way because I need to have another area that displays the weighted average on the basis of 2 of the columns in this table set and I was unable to find a good way to make a weighted average using the interactive report options.

  The question just the other side is that I can not simply refer text buried user to a static source page element. I used radio groups before where the change they had an action "refresh and set the ' enabled me to make reference to them, but I don't see how to do something like this with the dates selectors.

  Any ideas on how I should go about it?

  EDIT:

  I've included an example of what I am trying to accomplish.

  Link- https://apex.oracle.com/pls/apex/f?p=30262:101:102700562633003:

  Username - TESTER

  PW - Tester

  JaReg wrote:

  Partitions tab person and date shows the page that I create. Currently the regional report and the Middle regions "Totaled" are implemented using the Radio top unit

  I want to do the same thing with the dates selectors, but previously I was unable to get the selectors of dates static to use in a sql requpete as I can with the Group of radio buttons.

  I created the page 586 as a copy of the original, with the following changes:

  1 has changed the Page Action sélection P586_PERSON point filter parameter of redirection and set the value None.

  2. added explicit Format mask to DD-MON-YYYY to filter items date picker.

  3. change the source of the region of results reports to:

  select
      *
  from
      scores s
  where
      s.person = :p586_person
  and s.scoredate between to_date(:p586_mindate, 'dd-mon-yyyy') and to_date(:p586_maxdate, 'dd-mon-yyyy')
  

  4. define the region of results reports the Items property of the Page to be sent to P586_PERSON, P586_MINDATE, P586_MAXDATE. What causes the values of these elements to present before a partial page refresh is performed on the region, making them available in session state when the content of the region is updated.

  5 created a dynamic change on the region of filter action:

  Event: Change

  Selection type: Region

  Region: Filters

  Action: Discount

  Fire on Page load: NO.

  Selection type: Region

  Region: Reports of results

  The region of IR report Score is now automatically updated each time that one of the elements in the region of filters are changed. That leaves the data region totaled. As a static content area may not be automatically updated by a dynamic action of PPR, and I'm not so sure as rules that must be used to apply filters to the values of the region. The same range filters in person and date should apply to the total values as are used in the report?