Create the Excel ODBC socket connection

Hello, helpful people!

I installed CF8 without documentation. This caused the problem known to not do an install complete ODBC drivers. In fact, I was doing very well (I could, for some reason, use MySQL driver doesn't have a problem) until I suddenly wanted an Excel driver.

I searched online, found my answer and started to follow the instructions:
http://www.Adobe.com/go/kb402637

Unfortunately, I can't follow instructions #6, "Run instODBC.cfm in a browser using the location you have stored to." each time I run it, I get an error "current user is not authorized to invoke this method" - even when I'm logged on as administrator.

I tried to move the installODBC.cfm file to a few places (including in CFIDE/administrator) does not.

I need to create access to Excel in order to complete my code! Help?

Best wishes
CAT

Cat,

Technical note refers to a Troubleshooting page. The comments by Alexander mention providing the ColdFusion administrator password, when the script creates an instance of the Admin API. Try adding your administrator password to the
installODBC.cfm file. Then, run the script again.

Tags: ColdFusion

Similar Questions

Failed to create the Conference ' 8801 - Test connection '-duplicate digital id

Running 13.1 TMS and Codian 8510 SD blade running 4.20 (1.43)

When I'm planning through TMS using this card, I get the following error:

Failed to create the Conference ' 8801 - Test connection '-duplicate digital id

However when I'm planning TMS using another slide with the same version of the software it works

Can someone tell me why this is happening?

Anthony

We had the same problem with > = 20 conferences on the blade, and I can tell you that we had the same thing

question and the question went after the 4.2 update (1.50) and TMS13.1.2 (if the MCU upgrade)

alone must fix).

And, you got the point in your last message, > = 20 conf == problem,.<20 =="no">

What I have is that the API MCU always reported only the first 20 conferences.

TMS has created the new conference (and I also saw a new reserved (e) of the Conference on the MCU)

but TMS checked once again if that's really where went wrong because he was not listed in the breast of the

first of all 20 and if it failed.

Codian updates may take some time until the blade is up again after the reboot, so be patient :-)

Good luck!

in the waking state socket connection problem

Hi all.
My app need update real-time security data, it should be able to run well even the switch of the PB in the waking state.
The problem is that when PB passes to the waking state and more than an hour later, my application cannot send request for data to the socket server (initially he workd well), even when the PB get again enabled, the socket connection is also unnecessary.
I did a test as follows:
1, I added the "throttled" in the blackberry - tablet.xml
2. I have add a few listiner event in the main class, but each of them can be fired in any time.
```
QNXSystem.system.addEventListener(qnx.events.QNXSystemEvent.STANDBY,onDeactive);
QNXSystem.system.addEventListener(qnx.events.QNXSystemEvent.ACTIVE,onActive);
QNXSystem.system.requestResource(QNXSystemResource.NETWORKING);
stage.addEventListener(Event.USER_IDLE,userIdle);
stage.addEventListener(Event.USER_PRESENT,userPresent);
stage.addEventListener(Event.ACTIVATE,onStageActive);
stage.addEventListener(Event.DEACTIVATE,onStageDeactive);
```
3, I put a clock to save information in / shared folder.it worked well in the waking state.

Thanks for any response.

Hello.
I'm a developer of instant messaging which is connected to the door via socket. What I can tell you for sure I you need to use:
normal
That, to use SocketMonitor to ensure that connections are available, some WiFi routers can close idle connection event when U don't want to! If you need to reconnect in such cases.
Please, feel free to ask for help more.

10.1.3.3 and jxl ADF to create the Excel file
Hello

It is more a question of Java of ADF, but I hope to have some answers here too. I am creating an Excel via JExcelApi file but I have an error message:

ERROR com.sun.faces.lifecycle.InvokeApplicationPhase - oracle.classloader.util.AnnotatedClassFormatError: Bad version in .class file number

Class invalid: jxl. Workbook
+ Charger: current-workspace - app.web.MyApplication:0.0.0 +.
Source code: /C:/Oracle/JDeveloper/jdev/lib/jxl.jar
Configuration: < classpath > in ...\WebApp\ViewController\public_html

Load class: web.view.backing.reports.CreateKapExcel
Charger: current-workspace - app.web.MyApplication:0.0.0
Source code: .../WebApp/ViewController/classes/
Configuration: < classpath > in ...\WebApp\ViewController\public_html

javax.faces.el.EvaluationException: oracle.classloader.util.AnnotatedClassFormatError: bad version in .class file number

Class invalid: jxl. Workbook
Charger: current-workspace - app.web.MyApplication:0.0.0
Source code: /C:/Oracle/JDeveloper/jdev/lib/jxl.jar
Configuration: < classpath > in ...\WebApp\ViewController\public_html

Load class: web.view.backing.reports.CreateKapExcel
Charger: current-workspace - app.web.MyApplication:0.0.0
Source code: .../WebApp/ViewController/classes/
Configuration: < classpath > in ...\WebApp\ViewController\public_html

at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:150)
at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1087)
at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:204)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)

The code looks like this:
```
    try
    {
         ExternalContext extContext = fc.getExternalContext();

         HttpServletResponse response = 
           (HttpServletResponse) extContext.getResponse();

       response.setContentType("application/vnd.ms-excel");
       response.setHeader
         ("Content-Disposition", "attachment; filename=sampleName.xls");
       WritableWorkbook w = 
         Workbook.createWorkbook(response.getOutputStream());
       WritableSheet s = w.createSheet("Demo", 0);
       s.addCell(new Label(0, 0, "Hello World"));
       w.write();
       w.close();
    }
    catch (Exception loE)
    { //...
```
Anyone have any ideas? Thank you in advance,

Kind regards!

BB
Hello

for me, the problem seems to be with the version of Java that the Workbook class is compiled with. This is the latest version of the library you are using?

Frank

Create the Excel using Indesign javascript file

Hi all

We can create csv file using indesign javascript. Is there a way to create excel file using indesign javascript?

Thanks in advance

Hi all

It is a way to generate an Excel from an InDesign table by using a combination of jsx, vbs and applescript.

Quite a long discussion on that Open with below is a better application of the suggestions here.

// Exports SIMPLE tables to proper excel file single and double quotes in the table would have to be escaped on the Mac version
// Does not take Unicode file names
// with a bit of brain racking can be developed to deal with merged cells and nested tables
// Pieced together by Trevor (wwww.creative-scripts.com coming soonish) based on the referenced sources
// Sold AS IS https://forums.adobe.com/thread/1718021

var doc = app.properties.activeDocument && app.activeDocument,
       myTable = myTable || getTable (doc);
if (!myTable) {alert ("Take a break, needs a document with a table in it!"); exit();};
var filePath = new File (Folder.temp + "/" + +new Date + ".xlsx"),
    osFilePath = filePath.fsName;
if ($.os[0] === "M")  osFilePath =  osFilePath.replace(/(.)(\/)/g,"$1:").replace(/\//, "");

exportTable (myTable, osFilePath);
if (confirm ("Open new excel file")) filePath.execute(false);
 exit()
function exportTable (myTable, filePath)
    {
        var  numberOfRows = myTable.rows.length,
               rowNumber, columnNumber,
               isMac = $.os[0] === "M",
               rowContents = [],
               setRange, openMark, closeMark;

        if (isMac)
            {
                setRange = 'set value of range "A';
                openMark = '" to {';
                closeMark = '}';
            }
        else
            {
                setRange = 'app.Range("A';
                openMark = '") = Array(';
                closeMark = ')';
            }

for (var z = 0, rowNumber = 0; rowNumber < numberOfRows; rowNumber++) {
    var  numberOfColumns = myTable.rows[rowNumber].columns.length,
            toRange = GetExcelColumnName (numberOfColumns - 1),
            columnContents = [];
     for (columnNumber = 0; columnNumber < numberOfColumns; columnNumber++) {
         var cellContents = myTable.rows[rowNumber].cells.everyItem().contents;
         columnContents  = '"' + cellContents.join('", "') + '"';
     }
    rowContents[rowNumber] = setRange + ++z  + ":"  + toRange+ z + openMark  + columnContents + closeMark;
}

var tableData = rowContents.join("\n") + "\n";

               if (isMac)
                    {
                        // Thanks Hans https://forums.adobe.com/message/5607799#5607799
                       var myAppleScript =
                        '''set excelRunning to isRunning("Microsoft Excel")
                           tell application "Microsoft Excel"
                           set theWorkbook to make new workbook
                           tell sheet (1) of theWorkbook'''
                           + tableData + '''
                           end tell
                           save workbook as theWorkbook filename "''' + filePath + '''"
                           close active workbook
                           if not excelRunning then tell application "Microsoft Excel" to quit
                           end tell
                           on isRunning(appName)
                                tell application "System Events" to (name of processes) contains appName
                           end isRunning
                        ''';
                      app.doScript (myAppleScript, ScriptLanguage.APPLESCRIPT_LANGUAGE);
                    }

                else
                    {
                        // Thanks Calos https://forums.adobe.com/message/5607799#5607799
                        // changed by me :-)
                         var vbscript =
                         '''Dim app
                            Set app = CreateObject("Excel.Application")
                            'take away the ' from the line below if you want to see excel do it's stuff
                            'app.visible = true
                            Dim newDoc, sheet
                            Set newDoc = app.Workbooks.Add()
                            Set sheet = newDoc.Worksheets(1)
                            '''
                            + tableData
                            + 'newDoc.SaveAs "' + filePath + '''"
                            app.Quit
                            Set newDoc = nothing
                            Set app = nothing
                          ''';
                        app.doScript (vbscript, ScriptLanguage.VISUAL_BASIC);
                    }

            }

function GetExcelColumnName (columnNumber) {// 0 is A 25 is Z 26 is AA etc.
    // parsed from http://stackoverflow.com/questions/181596/how-to-convert-a-column-number-eg-127-into-an-excel-column-eg-aa
     var dividend = columnNumber + 1,
            columnName = "",
            modulo;

    while (dividend > 0)  {
        modulo = (dividend - 1) % 26;
        columnName = String.fromCharCode (65 + modulo) + columnName;
        dividend = Math.floor((dividend - modulo) / 26);
    }
    return columnName;
}

function getTable (doc) { // thanks Marc http://forums.adobe.com/message/6087322#6087322
    if (!doc) return false;
    app.findTextPreferences = null;
    app.findTextPreferences.findWhat = "\x16";
    var tables = doc.findText();
    if (tables.length) return tables[0].parentStory.tables[0];
    return false;
};

Create the ODBC for OBIEE-[nQSError: 12017] taken unexpected read timeout

Hello friends,
I installed OBIEE 11.1.1.7 on vmware on my laptop. IM able to communicate via Putty and local browsers successfully to all connections (console, em, analytical, bipublisher, etc..)
Now when I try to create the configuration odbc DSN connection.
I get the error, such as mentioned in the subject.
My laptop's firewall is turned off. My OS linux IPTables is disabled.
the analytical poet is 9704.
Screenshot is attached.
Please help me with this problem.
Kind regards
Djay

Just in case where to check SEO port 9703.

In the "Save the login ID" Please change the port to 9703

ColdFusion 10 - cannot create the database

I think that this error has to do with permissions, but I'm not sure. I'm not under personal service accounts to run IIS 7.5 or Coldfusion. There is some dirt on my server and Setup:

Server product	ColdFusion
Version	ColdFusion 10,282913
Edition	Developer
Operating system	Windows Server 2008 R2
OS version	6.1
Update level	/C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
Version of the Adobe driver	4.1 (build 0001)

Details of the JVM

Java version

1.6.0_29

History of this server:

A installed version 9.0.1. Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final. Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage. I then rebooted and again installed IIS and WAS. The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.

After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2. Web server here on out stuff is practically install stock.

I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.

Error just after the attempt to create the data source:

Connection verification failed for data source: andHalt

org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to

Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action

java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

at java.lang.Thread.run(Thread.java:662)

Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

... 13 more

Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

... more than 10

Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

at java.security.AccessController.doPrivileged (Native Method)

at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

... more than 10

= launch nested exception, level (1) =.

java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.