Create the link of database error

Similar Questions

• Could not create the link of database of the schema of the ORA/APEX

  Hello

  I tried to create the link of database for my schema oracle on my localhost and it brings me an error "database user has sufficient privileges for the proposed operation.". I don't know what the problem is?

  This pattern of localhost was created for APEX.

  Thank you

  I tried to create the link of database for my schema oracle on my localhost and it brings me an error "database user has sufficient privileges for the proposed operation.". I don't know what the problem is?

  This pattern of localhost was created for APEX.

  What is developer Sql has to do with the problem? This forum is ONLY for sql developer questions.

  If this isn't a problem with Sql developer please mark ANSWERED thread and repost it in the general forum of the database

  Database General Discussions

  The exception is you say the problem: the user you are using to create the DB link doesn't have the necessary privileges to create the DB link type you are trying to create. Privileges are required on the source and target databases.

  When repost you, you will need to provide:

  1. your full 4 DB for DBs source and target text segment

  2. a copy OF the sql * plus (or other) session you use to create the DB link

  3. information on the user that you use to create the link DB - including the privileges that have been granted to this ulser

  4 information on the type of link DB you try to create

• Get the FS-10260 10794 FS FS-10495 error to create the integrated safety database

  Hello
  
  When I try to create the example of integrated security of Oracle database manager. But when it tells me error, below
  
  Versions: client = 3.4.1 3.4.2 OS = Server =
  
  Operation: Creation of database 'Failsafe_DB' example on the node 'WIN1.
  Departure time: July 14, 2010 22:55:15
  Elapsed time: 0 minutes, 7 seconds
  
  1 22:55:15 introduction of clusterwide
  2 22:55:16 FS-10905: WIN1: from the creation of a stand-alone resource Failsafe_DB
  3 22:55:16 FS-10371: WIN1: perform initialization processing
  4 22:55:16 FS-10371: WIN2: run the initialization processing
  5 22:55:17 FS-10374: WIN1: collection of cluster information required to perform the specified operation
  6 22:55:17 FS-10374: WIN2: collection of cluster information required to perform the specified operation
  7 22:55:18 FS-10375: WIN1: analysis of the cluster information required to perform the specified operation
  8 22:55:18 FS-10378: WIN1: preparation for the configuration of Failsafe_DB resources
  9 22:55:18 FS-10906: WIN1: creation of the independent resource
  10 22:55:18 > FS-10635: created the file c:\oracle\ofs_1\fs\fssvr\sample\Fs_Var.ora
  11 22:55:18 > FS-10368: appeal to the SCW database to create the database example; This will take a few minutes...
  12 22:55:22 * ERROR: FS-10260: failure of the attempt to create database example autonomous Failsafe_DB
  13 22:55:22 > FS-10367: check the logs at C:\OraHome\cfgtoollogs\dbca\OFS1 for more details
  14 22:55:22 * ERROR: FS-10794: the Oracle database resource provider could not create the stand-alone resource Failsafe_DB
  15 22:55:22 * ERROR: FS-10890: Oracle Services for MSCS failed during the createStandalone operation
  16 22:55:22 * ERROR: FS-10497: from clusterwide canceling the operation
  17 22:55:22 FS-10488: WIN1: from decrease in price of the operation
  18 22:55:22 FS-10489: WIN1: completed the restoration of the functioning
  19 22:55:22 * ERROR: FS-10495: Clusterwide canceling the operation is completed
  20 22:55:22 clusterwide failed!
  
  Here, I describe what I've done,
  
  Configured the 2 node clusters in Windows Server 2008. (using Oracle VM)
  Installed Oracle failsafe 3.4.2 (on private drive)
  Installed Oracle 11.1.0.6.0 (on private drive)
  Service Oracle for MSCS is running.
  
  Now, I do not understand why the creation of the example database fails?
  
  If anyone knows about this problem, then please post a comment...
  
  Kind regards
  Manish

  Hi manish;

  Please check:

  FS-10726 when you add a database to a group of integrated security [124664.1 ID]
  OERR: FS-10495 Clusterwide reduction in the price of the operation was completed [70458.1 ID]
  Bug 5770080: CREATE the EXAMPLE of DATABASE FAILS WITH 10.2.0.3.0

  For your error checking which i belive will not help so mch, but please check
  OERR: FS-10794 resource %s provider could not create the stand-alone resource %s [137861.1 ID]
  OERR: FS-10260 attempt to create database example of standalone %s failed [50840.1 ID]

  Please also visit:
  Oracle® Fail NotesRelease release 3.4.1 for Microsoft Windows
  http://download.Oracle.com/docs/CD/E10736_01/doc/Relnotes.341/e10719/TOC.htm

  Respect of
  HELIOS

• Drop the link of database in oracle 11g

  I created a schema with the name of sapsmc which has all the privileges, then I created 1 link of database. Now, I want to drop this database link, but I can't able to drop this error.

  «SQL error: ORA-00604: error occurred at recursive SQL level 1 ORA-20101: Sorry, can't remove any object without the permission of live database SAPGateWay.» ORA-06512: at the level of the 5 00604 line. 00000 - 'error occurred at recursive SQL level %s' * Cause: an error occurred during the processing of a recursive SQL statement (a statement applicable to the internal dictionary tables). * Action: If the situation described in the next error on the stack can be corrected, do so; otherwise contact Oracle Support.

  Then I tried to delete the user SYS, while doing this that I got below error.

  SQL error: ORA-02024: database not found link 02024. 00000 - "database link not found" * Cause: database to remove link is not found in the dictionary * Action: correct the name of the database link

  Please help me I appreciate your efforts.

  ORA-20101: Sorry, can't remove any object without the permission of live database SAPGateWay.

  There is not much we can do about it.

  It is an exception defined by the user, probably from a FRONT DROP trigger defined at the level of the database, which prevents people from dropping objects.

  Contact, one who is responsible (DBA?) about how to proceed.

• 836: failed to create the shared memory data, error 22 store segment

  Hi, I am new to timesten and databases in general, and I'm testing the database timesten to test.
  
  I am running ubuntu linux in virtualbox and have java 6 is installed. So far, I installed the timesten database and configured the sys.odbc.ini to create a new database. However, it seems that I can't connect to a database.
  
  I connect with the orattadmin of the user (which belongs to groups both timesten and ttadmin)
  
  I run the commandes./ttenv.sh and I have the classpath for ttjdbc6.jar in it.
  then I run le./ttisql.sh, and when I try to connect to mydatabase or any other database present in the sample folder I get:
  
  $. / ttisql
  
  Copyright (c) 1996-2011, Oracle. All rights reserved.
  Type? or 'aid' help, type "exit" to leave the ttIsql.
  
  
  Command > Connect "dsn = mytest_ttdb";
  836: failed to create the shared memory data, error 22 store segment
  The command failed.
  
  what I am doing wrong? What can I do?
  
  Thanks for your time

  A data store active TimesTen consists of a single shared memory segment allocated from o/s. The size of this segment is PermSize + TempSize + LogBufMB + ~ 20 MB. This allowance will not allow the o/s unless the 'package' kernel parameter has a value greater than the requested size of the segment. According to the Guide of Installation TimesTen, you set various parameters of the kernel on the appropriate values (memory shared, semaphores, etc.).

  Chris

• Bug trying to create the link with the Cyrillic characters in URL

  I'm transforming words in my text on the links, but with Cyrillic characters in their URL (such as https://en.wiktionary.org/wiki/ хорошо). The problem is that, depending on how create the link, the page refuses to accept the URL.

  It's my preferred method (which accepts not the Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Paste the URL (https://en.wiktionary.org/wiki/ хорошо) in the field;
  4. Hit enter or click out;
  5. When I check the link, it is www.apple.com.

  The strange is that other methods work very well.

  1 against nature (accepts Pages):

  1. Delete my word;
  2. In its place, paste the URL (https://en.wiktionary.org/wiki/ хорошо);
  3. Hit the space bar (a link is created automatically with the correct URL);
  4. Edit the link that is created and change its text;
  5. When I check the link, he kept correct.

  2 against nature (accepts Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Find a way to build a version with my URL (https://en.wiktionary.org/wiki/%D1%85%D0%BE%D1%80%D0%BE%D1%88%D0%BE) escape sequence;
  4. Paste the URL with escape sequence in link field;
  5. Hit enter or click out;
  6. When I check the link, ironically, is хорошо https://en.wiktionary.org/wiki/.

  To stretch more:

  1. Editing a link created successfully (with any success methods above);
  2. Changed its URL (from хорошо https://en.wiktionary.org/wiki/ to https://en.wiktionary.org/wiki/ плохо)
  3. Hit enter or click out;
  4. When I check the link, it's still хорошо https://en.wiktionary.org/wiki/;
  5. Finally edited and changed its URL still once, now remove the Cyrillic (https://en.wiktionary.org/wiki);
  6. Press enter, click out and he finally accepted the URL.

  Pages seems to be denying the creation of links with the URL that contains Cyrillic characters (only?), but exclusively through his little creation of link popup. I think it's a simple problem, but I'm sure it's very annoying.

  Everyone knows the same?

  Cyrillic characters in the range of table encoding UTF-8 code points u + 0400 - u + 04 FF are represented by two bytes. These people must be encoded as a percentage (read the two paragraphs of the current standard of article), as the Pages v5.6.2 will convert automatically URI to this encoding for you in the link Inspector. It will simply ignore what it considers incorrect URI links, they are Cyrillic, or even English.

  Use what is easier for you, and that Pages v5.6.2 accepts.

• I want to create the link (to each row) in my detail page < < < < < in order, the articulation between (detail page 1 < < < detail 2).

  I want to create the link (to each row) in my detail page < < < < < in order, the articulation between (detail page 1 < < < detail 2).

  Hello

  f9afc1ea-f5a4-4400-A33A-187e03664d82 wrote:

  I want to create the link (to each row) in my detail page< in="" order="" to="" linking="" between="" (detail="" page="" 1="">< detail="">

  Change your column on which you want to create the link

  go to declare attributes-> column change-> under the column link

  1. Select a text link (you have option available under the link text select one of these option)

  2 target - > application Page

  3 page-> page not on which you want to redirect

  If you want to pass a value then

  Item1-> select an item in the page detail2

  values-> that you want to move the page pos.1

  see this screen shot for reference

  

  Hope this helps you,

  Kind regards

  Jitendra

• I out of the CC to my previous laptop and I can not understand how to create the link connection in my new laptop

  I out of the CC to my previous laptop and I can not understand how to create the link connection in my new laptop

  Hi Steven,

  You have the CC of Adobe desktop application installed on your machine?

  In the case is not, please see the help below document to download the same:

  Creative cloud to desktop

  Kind regards

  Sheena

• 2 VDR "impossible to create the snapshot for &lt; system &gt;, error-3960 (cannot suspend virtual machine).

  We test VDR on our ESXi 4.1.0 cluster 381591 and we have a few backups to a test Windows 2003 server and a Linux server and they backed up fine. We have a backup of a Windows 7 computer virtual test and we had a bunch of these errors...

  Failed to create the snapshot for systemname, error-3960 (can not suspend virtual machine)

  Which is strange because I can go in vSphere client and manually create a snapshot and remove without problem. Any ideas on why this is happening?

  Thank you

  You can try to set the 'disk. EnableUUID' to 'false '.

  Look here:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1031298

  Paul

• I have an external page on my USB key I want to make a link to Muse. How to create the link?

  I have an external page on my USB key I want to make a link to Muse. How to create the link?

  Hello

  Check this thread, use .pdf in Adobe Muse

  He talks of the .pdf files in the discussion, you can use your html instead of the PDF file.

  Please let me know if you have any other questions.

• Hi where is the link of database previously Windows menu?

  Hi where is the link of database previously menu Windows

  Removed feature: functionality of server, covers and panels and database components behavior

  There is a unique extension to restore these features. Extension is available at: * Vista/Windows 7: C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CC\Configuration\DisabledFeatures * Mac OS X:/Applications/Adobe Dreamweaver CC/Configuration/DisabledFeatures

  As seen on http://blogs.adobe.com/dreamweaver/2013/06/a-look-at-the-modernized-dreamweaver-cc.html

  Video instructions on how to install these file available here: http://www.youtube.com/watch?v=cB2vmNfcq7A

• Create the content table gives error since the site Explorer

  Hi all

  I'm new to the web sites of the centre.

  Trying to create the table from the Explorer of sites.

  Tied at the top of the screen for creating the table.

  Get above error after clicking OK.

  No idea what I can do wrong. I logged in Site Explorer using admin user 'fwadmin '.

  Another way, I can create table content?

  Thanks in advance...

  Kind regards

  Ganesh

  Hello

  As Stephan said, you must create the table with the ID. Also, I wanted to just mention that I did face some questions, creation or update of some tables because of fwadmin ACL.

  There is another default user who has these specific ACLs to work on the database:

  -name: ContentServer

  -password: password

  I hope this can help,

  Concerning

• Call the DBMS package via the link of database

  IM changes on tables using dba_tab_modifications, number of databases, 1 metric scheme in 1 case.  to get the latest changes, I have to empty the changes which means I have to exec dbms_stats package remotely.  I can do by creating a proc and calling the proc over a database link.

  Remote

  create or replace procedure flush_db_info

  Start

  DBMS_STATS. FLUSH_DATABASE_MONITORING_INFO;

  end;

  local

  create synonym remote_flush for flush_db_info@remote

  exec remote_flush;

  Is there anyway that I can run the DBMS_STATS. FLUSH_DATABASE_MONITORING_INFO@remote on the local to run on the remote control, without creating the proc/synonym?

  This is no biggy, I got it working like this, I just want to see is possible

  Have you tried?

• Muse of blocks - Where is the Love? Failures of the app launching &amp; database errors

  I really love Adobe Muse but I'm really frustrated by its instability.

  There are two general issues that I still feel.

  Launch of application issues

  First of all, and is a problem that I feel at this moment, a launch error where the program refuses to open and display an error message then crashes immediately.

  Today's message is:

  

  Someone has experienced this before or have a solution? I'm tired of signing in and out creative clouds and uninstall then reinstall Adobe Muse and same problem.
  

  
  

  Errors in the data / backup file errors

  I can usually wait a muse, save the file to become unusable for some sort of error of random database totally ruin my save file to me to have to take back to one, I already saved. Like the wii brought loading time in a serious way that adobe Muse brings incremental return record we WOULD abandon all practices.

  Why it sucks

  I don't do web development high-end, but I offer basic sites to customers with simple needs and I find Muse a delicious product given my skills and base in photoshop.

  Not being able to update sites or launch the application at all is SUPER annoying.

  It certainly justifies NOT using Adobe Muse for complex sites.

  If there is a general approach that I can take to avoid these problems, I'm all eyes and fingers.

  Thank you!

  Hello

  Solution for "incompatibility of Üser ID.

  Please the following steps and you'll be all set.

  1. disconnect Muse by going to help > log out. (if you see the option to do so)

  2 disconnect from the creative Application of cloud. (Steps are mentioned in the link disconnect, sign in |) Creative Office Cloud app), then quit the Application in creative cloud.

  3 Rename the folder "OOBE" to "OOBEold".

  MAC: (This file can be found at Finder > go > go to folder > enter ~/library/application support/Adobe > press return)

  Widows: (This file can be found at C:\Users\\AppData\Local\Adobe )

  4 restart the Muse, sign in with your Adobe ID

  Suggestion for the database error:

  Is the file that is saved on the local or a network drive or a direct external location Dropbox or Google Reader.

  Please move the file to the desktop and then try to save the file after making a few changes. I hope that you will get no error.

  If you get the error please correct the error screenshot part.

  Concerning

  Vivek

• Download worksheet of others generates you have not signed the Applications required database error

  Greetings,

  We use the 7.2.12.04.25 32-bit version of ADI on a machine IBM P750 running AIX 5.3.  The correct application of the Oracle is version 11.5.10 on a 10G database.  We have two users who are unable to download each other spreadsheets, but are able to upload their own.  Another user is able to download the worksheets created by both users who cannot download all other worksheets.  ADI settings seem to be the same, and users choose the same responsibility.  Database properties appear to be the same as well inside spreadsheets.  One option would be to copy the contents of the worksheet to the other person in one they have created, and then load it but this process is too cumbersome to entertain.  Has anyone met and solved this problem?  The mistake they see is "you have not signed the required Applications database.

  Thank you!

  Scott

  User418146 wrote:

  No - in the CRITERIA of worksheet tabs.  Column A on line 10 is "CONNECTION STRING".

  I don't think so.

  Could you please try to use the same GL responsibility first and see if it works?

  Thank you

  Hussein