Select data in frames
Hello
I recorded a few frames in a NI CAN (.ncl) log file. Now, I use the VI "View Logfile as Frames" from examples of NEITHER. I have change the VI to select arbitration ID proximity all the id I have succeed to choose but I have a row of zeros in the scoreboard by ID not interesting arbitration. How do I do remove zeros?
To select, I use a box structure. If ID is correct signal is connected to the table, if it is not the table is not wired to report and I have to choose 'Use default if Unwired'.
Thank you
François
Hello Francois,.
If your problem lies only in the visualization, you can try using the "remove table"-function to remove a row or column of the matrix 2D, you get as a result (called "Frame Display")
You can find the "delete table"-function in your palette by going to the programming function > table > delete table
Can you let me know if this helps you?
Tags: NI Software
Similar Questions
-
System Restore will not restore the selected date, even if the date is in bold in the home
It just says: cannot restore the selected date
Usually, this is caused by your anti-virus program is interfering with the system restore. Norton is especially guilty of this behavior. Try restarting your computer in Mode without fail (repeatedly tap key the F8 key during the restart of the computer), and then perform your safe mode system restore. When it restarts after you perform the restore, allow him to start in normal mode.
HTH,
JW -
Is it possible to set up a computer to turn on and turn off itself every day or on any selected date?
Mine is a HP G72-b27CL running Windows 7 64 bit laptop.
Yes can schedule a task to start the system using the option shown in the screenshot below:
You can schedule a task to turn the system off by as shown in the link below:
http://www.thespinningdonut.com/how-to-automatically-shut-down-your-Windows-7-computer/
-
Get DateField selected date?
I have my DateField has been fixed as follows:
SimpleDateFormat dmy = new SimpleDateFormat("yyyy MM dd"); DateField depart = new DateField(str_depart, System.currentTimeMillis(), dmy);
It is shown:
2011 05 04
I want to get the selected date of this area and I use getDate(); method that returns type of Long (1304485459386).
How can I do to convert it to a string and 2011-05-04 show?
Thank you
Kind regards.
Thank you very much!! girishthakr
-
Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide
Hi Anandsable,
The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:
http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.
Hope the helps of information.
-
Create the form for selecting data in multiple tables
Hello
I'm getting APEX for the first time and I just read 2 days dev Application Express guide
I tried to play and I can't create a report with the form that select data from several tables
What I want to achieve is a report we'll say 'USERS' makes MANAGER_ID ID, NAME, with a form that allows me to create, delete, change users
The problem is that, once the report with the form created, if I click on create (to create a user) it will ask me for id, name, and manager_id
I need a water drop down which allows me to select managers in the table manager instead of manually insert Director id
How do I do that?
Thank you!
HI Chris,
LOV will use this magic.
Search:
Kind regards
BEnjamin
-
The selected data source is read-only
Someone knows how to solve this 'problem '.
The selected data source is read-only. You cannot change the view configuration.
Thanks in advance.
My solution to this has been reset in the field of data and download information again. I know that it is not best practice but it works
-
Hi all
IAM trying to extract data from a table that has 3 columns I need to select data, of the same c1, c2 values the c3 must be unique. If the value of c3 is different, so I need to reject these data.
For example:
Table
C1 c2 c3
123 21 July 12 4
123 21 July 12 4
125 23 July 12 6
126 24 July 12 7
126 24 July 12 7
126 24 July 12 7
126 24 July 12 10
126 27 July 12 13
126 27 July 12 13
127 25 July 12 12
127 25 July 12 12
127 25 July 12 12
Result:
C1 c2 c3
123 21 July 12 4
125 23 July 12 6
127 25 July 12 12
126 27 July 12 13
And the oracle 8i installation version.
Please help me to write a query that takes less time to retrieve the data...
Thanks in advance!
-KelHi, Kel,
Here's one way:
SELECT c1, c2 , MIN (c3) AS c3 -- see note FROM table_x GROUP BY c1, c2 HAVING COUNT (DISTINCT c3) = 1 ;
Note: because the selected groups will only have 1 value of separate c3, it does not matter if you display the MIN or MAX. they will always be the same.
This assumes that c3 is not NULL. If c3 can be NULL, then the solution is a bit more complicated, but only a little.
-
cannot select data in a nested table?
why we cannot select data in a nested table?
DECLARE TYPE MY_ARR IS TABLE OF VARCHAR2(15); IDArr MY_ARR; BEGIN IDArr := MY_ARR(); select ename into IDArr from emp; END; /
806540 wrote:
why we cannot select data in a nested table?DECLARE TYPE MY_ARR IS TABLE OF VARCHAR2(15); IDArr MY_ARR; BEGIN IDArr := MY_ARR(); select ename into IDArr from emp; END; /
It also isn't a such thing as a ' + nested table + "-despite what the documentation calls them. The CORRECT term is the table. Since the dawn of programming. And called 'paintings' in many languages of programming and data structure theory ever since.
In Oracle, the term "table" has a very precise meaning. A table in PL/SQL language nothing BUT a table at all. A completely different data structure that does not have the characteristics of an Oracle table.
The code you wrote is also dangerous. If there are 100,000 rows in this table, you will copy all 100,000 rows in a PL/SQL table - that resides in the memory of the very expensive server called the PGA (process private memory). You can cause a serious impact on the memory of the server with this approach of poor quality - I saw such a code crashing the production servers.
So let's not terminology. Is the wrong approach. Code is wrong.
So why not rather tell us what you're doing, or trying to understand, instead?
-
Change the selectable Dates in DateField
Im trying to create a form of event where the datefield will only accept a date of a specific amount of dates to be fired.
For example, something like this: If the date (today) is greater than the Monday of the 4th week of the month, (so for this month of February, it would be > 20th) then this month (would be nice if it also eliminated previous days that have already passed in the month) and next month is a available for select dates. Else (if less than the 4th week of the month, < 20 February) only this month (february) is a of dates that are available to be picked on.
I was wondering how you can do this with a < cfinput type = "datefield > tag." I was able to come up with something, but don't know how to get out of here.
Of CFSET
< cfset subsist = Now() >
< cfset NextMonth = DateAdd (', 1, subsist) / >
< cfset nextMonthNum = daysInMonth(#NextMonth#) / >
< cfset weekNum = (#weekOfMonth (now ()) #) / >
< cfset daysNum = daysInMonth (now ()) / >
< cfset dateToday = Now() >
DateField
< cfinput
Type = "datefield".
label = "date".
mask = "d/mm/yy".
name = 'activitydate '.
value = "#dateAdd (would be ', now ()) + 1 ' # '"
required = "yes".
message = "Please select a valid Date for the event" / >
That is, it checks for the amount of days and traverses them by giving the date range available at the beginning of the month.
< cfscript >
function weekOfMonth (thisDate) {}
var thisDay = day (thisDate);
var thisWeek = 0;
If (thisDay LTE 7)
thisWeek = 1;
ElseIf (thisDay GT 7 AND thisDay LTE 14)
thisWeek = 2;
ElseIf (thisDay GT 14 AND thisDay LTE 21)
thisWeek = 3;
on the other
thisWeek = 4;
ThisWeek return;
}
< / cfscript >
< cfif #DatePart('w', TheDate) # GTE 4 AND #weekNum # GTE 2 >
True < br / >
< cfloop index = 'x' from = "1" to = "#daysNum #" >
< cfoutput >
#DateFormat (now (), "mm") #/ #x #/ #DateFormat (now (), 'yy') # < br / >
< / cfoutput >
< / cfloop >
< cfloop index = 'y' from = "1" to = "#nextMonthNum #" >
< cfoutput >
#DateFormat (NextMonth, "mm") #/ #y #/ #DateFormat (NextMonth, "yy") # < br / >
< / cfoutput >
< / cfloop >
< cfelse >
False < br / >
< cfloop index = 'z' from = "1" to = "#daysNum #" >
< cfoutput > (now (), "mm") #DateFormat #/ #z #/ #DateFormat (now (), 'yy') # < br / > < / cfoutput >
< / cfloop >
< / cfif >
Any help is greatly appreciated!
BobbyWales21 wrote:
Im trying to create a form of event where the datefield will only accept a date of a specific amount of dates to be fired.
For example, something like this: If the date (today) is greater than the Monday of the 4th week of the month, (so for this month of February, it would be > 20th) then this month (would be nice if it also eliminated previous days that have already passed in the month) and next month is a available for select dates. Else (if less than the 4th week of the month,<20 for="" february)="" only="" this="" month(february)="" is="" has="" available="" dates="" to="" be="" picked="">20>
I found this a difficult to express in the code requirement. I chose to do the simple way with cfselect. With cfselect, it is possible for the user to choose a date from a list including 2 consecutive months.
-
How to select data from a remote database table?
Hi friends,
I think I've seen before a sqlplus program that can select data from a remote database table?
Witnessed: IP, SID, PORT
The following is correct?
(I am connected to a local database)
SELECT COUNT (*) IN THE EMP@IP:SID/PORT;
Thank you very much
Ms. KSalvation;
I think, that you can create dblink wihtout any problem yet, it's a PROD. After your selection, you can drop dblink
Respect of
HELIOS -
How to export select data from table in the file?
Hello..
Here's my query to select data in 2 tables and I join help call_id column: -.
Select n.nbr_calling, n.nbr_called, c.tec, n.conversation_duration
of albn_ngnsm_280110 n, albc_ngnsm_280110 c
where c.call_id = n.call_id
and c.route_to_arbor = 1;
The problem is what is the query to export all the output in text files?
Thank you
BalleurHello
set echo off set heading off set pagesize 0 set linesize 150 spool D:\file.csv SELECT Query spool off
Thank you
Ankur -
In the date picker, how can I default to select * dates if the user does not select a date.
Thank you
DougDoug,
Now lets say l want everything
Could you post some sample data and the output you want to get... ? It would be very easy to understand the requirements...
When you mean everything, I guess you need all possible dates between date1 and date2.
You can use... (to asktom.oracle.com).
1 select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1 2 from ALL_OBJECTS 3 where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') - 4* to_date('12-jan-2009','DD-MON-YYYY') +1 ) sql> / TO_DATE(' --------- 12-JAN-09 13-JAN-09 14-JAN-09 15-JAN-09 16-JAN-09 17-JAN-09 18-JAN-09 19-JAN-09 20-JAN-09 9 rows selected. For your case, since you have date1 and date2... select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1 from ALL_OBJECTS where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') - to_date(:p12_date1,'DD-MON-YYYY') +1 )
Should work... in my opinion... Have not tested the other by their Summit.
Is that what you're looking for... ?? If no, please give details...
Thank you
Rajesh. -
Select data based on the priority of the State
ID PRO_ID PRO_OBJ_ID TASK_ID DEVELOPER_ID STATUS
121243 4940 37506 5250 6532 REJECTED
122063 4940 37506 5250 6532 RELATIVES
138306 4940 37506 5250 6532 ACCEPTED
138307 4940 37506 5250 6532 WIP
Hello
In the table above, I need to select data based on the State, a status which precedes CLOSE or ACCEPTED it should display all status any State which is after CLOSE or ACCEPTED, we do not consider.
In the scenioro above, it should display only the status of first three. After having ACCEPTED, it should not display something
Please suggest me a request how to write.
Thank you
Sudhir.Try:
SQL> with t as ( 2 select 121243 id, 4940 pro_id, 37506 pro_obj_id, 5250 task_id, 6532 developer_id, 'REJECTED' status from dual union all 3 select 122063, 4940, 37506, 5250, 6532, 'CLOSE' from dual union all 4 select 138306, 4940, 37506, 5250, 6532, 'ACCEPTED' from dual union all 5 select 138307, 4940, 37506, 5250, 6532, 'WIP' from dual union all 6 select 138308, 4940, 37506, 5250, 6532, 'ACCEPTED' from dual union all 7 select 138309, 4940, 37506, 5250, 6532, 'REJECTED' from dual union all 8 select 121243, 4940, 37777, 5250, 6532, 'REJECTED' from dual union all 9 select 122063, 4940, 37777, 5250, 6532, 'CLOSE' from dual union all 10 select 138306, 4940, 37777, 5250, 6532, 'ACCEPTED' from dual union all 11 select 138307, 4940, 37777, 5250, 6532, 'WIP' from dual union all 12 select 138308, 4940, 37777, 5250, 6532, 'ACCEPTED' from dual union all 13 select 138309, 4940, 37777, 5250, 6532, 'WIP' from dual 14 ) -- actual query starts here: 15 select t1.id 16 , t1.pro_id 17 , t1.pro_obj_id 18 , t1.task_id 19 , t1.developer_id 20 , t1.status 21 from t t1 22 where id <= (select max(id) 23 from t t2 24 where t2.status in ( 'ACCEPTED', 'CLOSED' ) 25 and t1.pro_id = t2.pro_id 26 and t1.pro_obj_id = t2.pro_obj_id 27 and t1.task_id = t2.task_id 28 and t1.developer_id = developer_id 29 ); ID PRO_ID PRO_OBJ_ID TASK_ID DEVELOPER_ID STATUS ---------- ---------- ---------- ---------- ------------ -------- 121243 4940 37506 5250 6532 REJECTED 122063 4940 37506 5250 6532 CLOSE 138306 4940 37506 5250 6532 ACCEPTED 138307 4940 37506 5250 6532 WIP 138308 4940 37506 5250 6532 ACCEPTED 121243 4940 37777 5250 6532 REJECTED 122063 4940 37777 5250 6532 CLOSE 138306 4940 37777 5250 6532 ACCEPTED 138307 4940 37777 5250 6532 WIP 138308 4940 37777 5250 6532 ACCEPTED 10 rows selected.
If it works then please provide us with some representative sample data again.
-
I want to print. 'selection' and ' Print frames are dimmed.
I want to print information on a page. 'selection' & 'Print frames' are grayed out.
This has happened
Each time Firefox opened
== to always
Printing of images is available for web pages that have frames. You need to highlight a selection on a Web page to be able to use the selection.
Maybe you are looking for
-
Icons do not appear on the desktop
When I start my computer the colors of four windows are displayed.No images on the bottom or the other. I tried 'see' and 'display the icons', but it does not workI don't know what I am doing wrong because sometimes the icons after re-booting
-
Upgrade CPU of my Satellite Pro L300-152
Hello my laptop is a: Toshiba Satellite Pro L300-152Model no. PSLB1E-01R015ENCeleron 560 2.13 GHz Can someone tell me what CPU I can pass safely, I use it in a cool environment and care about a few 100 mhz more of her. Thank you for your support
-
I brought a HP Envy 15 j133tx. Configuration: 4702MQ i7 processor nVidia GT 750M 4 GB graphics card 8 GB RAM When I play games for 10-15 minutes the sound becomes lag and the games start extremely slow operation. Even the games run slowly. I tried to
-
loop for doesn't loop in table built from worksheet
I'm probably doing sonthing but really stupid... first I build and table of data in a worksheet (RefLookup) the spreadsheet contains 3 rows above the row is my label (getting by) the second row it my face value the third row is my minimum value. REF
-
DMA2200 - Media Center Audio, the DVD no sound
Hi all I have a DMA2200. We were making out and everything was fine, except when playing DVD. We would receive the error that 'due to copyright"etc... they couldn't play it full quality. I hunted around online and found that some people had correc