Create the top layer with transparency

Similar Questions

• Interactive PDF layers appear behind the text. A script can move them to the top layer?

  I have created a form in InDesign CC (latest version on a Mac under El Capitan). I export the form in PDF format. There are some interactive tooltips (with suggestions on how to fill in each particular field) implemented as buttons. The control keys are static. When I click on the trigger, the bubble appears, when I click on the bubble, it disappears. The problem is that even if the bubbles are set up on the top layer in InDesign, in many cases they appear behind the text layer.

  Is there a script that I can add to each individual bubble that says "when this bubble is active, move it to the top layer?

  This project took over 3 weeks of troubleshooting. In the end I came up with my own results. The answer was "no, it isn't a script."

  With the help of the Adobe customer service, we found that because in the InDesign file, I had the pop-ups on a different layer than the triggers, it was causing a problem of overlap. I found myself by combining the layers into a single, moving pop ups to the elements high on the page in the layers palette.

  Then I exported (interactive) PDF from InDesign and in the PDF file, in edit mode, in the fields Panel, I've selected all the pop-ups and offers them to at the bottom of each page [z-index property]. A lot of manual labor, but in the end, I got most of the results I wanted.

• I have a modal using html and css that opens very well.  However, given that modal is on layer 2 layer 1 objects fade out (gray out) in the background.  I can't put the modal on the top layer, so that it appears on all my pages.  It is specifi c that

  I have a modal using html and css that opens very well.  However, the modal is on layer 2 that the objects in the layer 1 fade out (gray out) in the background when the modal opens.

  I can't put the modal on the top layer, so that it appears on all my pages.  It is specific to the single page on my site.

  Here is the link: http://www.ueonline.com/website_NEW/certificationsapprovals.html#openModal

  Any help is appreciate!

  You can create a separate mask for this specific page with modal to the top layer and then apply that master page.

  Thank you

  Sanjit

• Is it possible to create the text block with non-uniform formatting is applied to the text?

  Hi all

  By this script

  var doc = app.documents.add(70, 20, 300, "Test", NewDocumentMode.RGB);
  var textLayer = doc.artLayers.add();
  textLayer.name = "Text";
  textLayer.kind = LayerKind.TEXT;
  
  var solidColorRef = new SolidColor();
  solidColorRef.rgb.red = 0;
  solidColorRef.rgb.green = 174;
  solidColorRef.rgb.blue = 239;
  
  var ti = textLayer.textItem;
  with (ti) {
       contents = "Blah-blah-blah!";
       kind = TextType.PARAGRAPHTEXT;
       height = new UnitValue("20 mm");
       width = new UnitValue("70 mm");
       position = [ new UnitValue("0 mm"), new UnitValue("0 mm") ];
       font = "MinionPro-Bold";
       size = new UnitValue("24 pt");
       color = solidColorRef;
       justification = Justification.CENTER;
  }
  

  So I can create a block of text with uniform like formatting

  
  But, as far as I understand it, it is impossible to make an image and apply different sizes, colors, etc. (Please confirm or refute it).

  To achieve the result by script as follows:

  

  The r to Browse datashows the formatting only to the beginning of this text.

  
  What I want to achieve is to take a block of text in the InDesign document and re-create it in psd-file. (The text must be editable)

  Y at - it another way to achieve this: by plug-ins, extensions, incantation, etc.?

  Kind regards
  Kasyan

  So that other things I noticed, it's text.jsx does not work with UnitValues. It uses the action Manager to work with textRanges. And it seems that Adobe changed the textItem units operating. Therefore, it is difficult to understand what values to use. Text.addNewTextLayer () and Text.modifyTextLayer () seem to what different values for the text of the same size.

  So below is an example updated the PS-Scripts-post on how to create a text layer with different textRanges using the current text.jsx.Note I've hard-coded sizes for that to work as I had hoped.

  function tsrDemo(doc) {
       var doc = app.documents.add(new UnitValue(70,'mm'), new UnitValue(20,'mm'), 300, "Test", NewDocumentMode.RGB);
       // we want to create a new text layer so create a new TextOptions with the contents as the argument
        var opts = new TextOptions("Blah-blah-blah!");
         // override the default settings
         opts.layerName = "Test";
         opts.kind = TextType.PARAGRAPHTEXT;
         opts.height = 800;// pixels
         opts.width = 200;
         opts.position = [ 0, 0 ];// pixels
         opts.justification = Justification.CENTER;
         opts.font = Text.findFont("Minion Pro Bold");
         opts.size = 6;// not sure what unit this needs
         opts.color = Text.toRGBColor(0, 174, 239);
  
         // create a new text layer with those options
       var layer = Text.addNewTextLayer(doc, opts);
  
         var opts = new TextOptions( layer.textItem);
         opts.contents = layer.textItem.contents;
         // now need to construct TextStyles for each range we want to set
         // for ranges we can only change the font, size, and color
         // first set a textStyle that matches the TextOptions
        var s1 = new TextStyle(undefined,undefined,undefined);
         // now set a textStyle for each different style you want
        var s2 = new TextStyle(undefined, 12, Text.toRGBColor(0, 0,0));// for some reason size values here are not the same scale as above
         // define more TextStyles as needed. here we only need one
  
        // Now create the set of ranges to apply the styles over
        var ranges = new TextStyleRanges();
         // the first range must start at 0.  In this example we want the first range unchanged
         // so we use the TextStyle that matches the TextOptions
         // this range covers the entire contents
        ranges.add(new TextStyleRange(0, opts.contents.length, s1));
         // this range covers the middle 'blah'
         ranges.add(new TextStyleRange(5, 9, s2));
          // we now add the ranges we set to the TextOptions
        opts.ranges = ranges;
  
         Text.modifyTextLayer(doc, opts, doc.activeLayer); 
  
      };
  
      tsrDemo();
  

• MC of adjustment on the top layer

  I have 3 layers in flash on 1 keyframe in the timeline that is just good.

  Have a rotating banner that I bought and it's all scripts that works very well.

  But I want another video clip to be at the top of the rotating banner. It's on the top of the page whithin the range of layers, but when the SWF file is previewd my MC I want on top or underneath.

  How do I action this MC it is on the top layer

  Thank you

  You say that the banner is all scripted, so I assume you mean that it is dynamically added to the film.  You might try to target the banner to add an empty movieclip which is placed manually in the timeline panel to sit under the movieclip you want on top.

  Similarly, you could dynamically load the movieclip after addition of the banner so that it deals with a greater depth.

• SatelliteA205 - player for the top menu with shortcuts for functions (Fn)

  Hello

  I have a Satellite A205-S4797 and I installed Vista Business (Pt_Br).
  Even with the drivers for Vista, I can not install the top menu with shortcuts to functions (Fn).

  Is there a specific driver for this version of Vista (Pt_Br)?

  If you write on flash cards that you need to install the package of added value. This package contains several tools and utilities, and one of them is for flash cards.

  Please check the Toshiba download page and see if the VAP is listed.

• Unable to create the support updating with key

  Hello Dominic,.

  I have a key of Windows 8, but not 8.1 key. I upgraded to 8.1 of the store, so I'm not able to create the support updating with the key I. Should which option I now?

  Thank you & good day,

  Ajay

  Split from: this thread

  Hello Dominic,.

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  You will need a Windows 8.1 product key in order to create a refresh on your computer Windows 8.1 support. You can activate your Windows 8.1 with your product key Windows 8 operating system after upgrade, but to create refresh media, you need a product key Windows 8.1.

  I recommend you to contact our phone support, our technical support engineers can help you in the creation of a support of refreshment with a key demonstration Windows 8.1.

  http://support.Microsoft.com/contactus/?ln=en-us

  Hope this information is useful. Feel free to write us again if you have any further questions or for any further assistance, we will be happy to help you.

• If you have two video layers, how did you composite the bottom of the top layer in the layer below mate in Premiere Pro?

  If you have two video layers, how did you composite the bottom of the top layer in the layer below mate in Premiere Pro?

  You have an element that contains the matte and the other clip contains the filling?

  Put the matte clip on a track directly above the clip to fill.

  Go to the effects Panel > video effects > Keying > overlay cache track and apply the overlay cache track for your video of filling on the timeline.

  Ensure that this clip is selected in the timeline panel and then go to the effect controls panel, whirlpool open orders the overlay to cover track by clicking on the triangle next the the name of the effect and Matte together: to the video track containing the Matte Clip.

  MtD

• addChildAt to the confusion of the top layer

  				Level 2

  If (score == 10 & & score < 30) {}

  var myMovieClipbg:winbg = new winbg();

  myMovieClipbg.x = 0;

  myMovieClipbg.y = 5;

  addChildAt(myMovieClipbg,1);

  }

  level 3

  Else if (score > 30 & & score < 60) {}

  var lastmc: tired = new tired();

  lastmc.x = 0;

  lastmc.y = 0;

  addChildAt (lastmc, 1);

  }

  'lastmc' should be the bottom of the top layer when the score is greater than 30. but it's not working. also if I use addChild (lastmc) . He became top of all layers. so my heroes and enemies all go down. I can not play. but the need lastmc just top of myMovieClipbg background layer.

  I suppose the confusion coming from addChildAt

  
  

  Note addChildAt(myMovieClipbg,1); works very well for the second level. it brings the high bottom of the first background.

  but addChildAt (lastmc, 1); fails to put in the background of the second context

  Try:

  tanvira5454192 wrote:

  				Level 2

  If (score == 10 & score)<30>

  var myMovieClipbg:winbg = new winbg();

  myMovieClipbg.x = 0;

  myMovieClipbg.y = 5;

  addChildAt(myMovieClipbg,1);

  }

  level 3

  Else if (score > 30 & score)<>

  var lastmc: tired = new tired();

  lastmc.x = 0;

  lastmc.y = 0;

  myMovieClipbg.addChild (lastmc);

  }

• Create the virtual machine with the ISO mounted CDROM

  Community of hell!

  Working on the vmcreate.pl script to add the creation of CD-ROM with iso data store, I got stuck on the error

  ' Invalid device configuration: ' VirtualSCSIControllerOption.numSCSICdroms '.

  I'm sure I'm missing something obvious, or this option but may not understand how to deliver this.

  I created a cdrom as follows (below test I create any CDROM, no iso file to reduce the number of layers):

  my $ BPPRR m_backing_info = VirtualCdromRemotePassthroughBackingInfo->new)

  deviceName = > ' '.

  exclusive = > 0,

  );

  my $description = description->new(label = > 'CDROM', summary = > 'cdddrom');

  my $connectable = VirtualDeviceConnectInfo->new(allowGuestControl = > 1,)

  connected = > 0,

  startConnected = > 1,

  ( State = > inmates ' / ' );

  my $ BPPRR m = VirtualCdrom->new(backup = > $BPPRRm_backing_info,

  connectable = > $connectable,

  controllerKey = > 0,

  deviceInfo = > $description,

  key => 1,

  ( unitNumber = > 1 );

  VirtualDeviceConfigSpec->new(device = > $BPPRRm,

  operation = > VirtualDeviceConfigSpecOperation->new()'add'));

  Did anyone have working example to create the virtual machine with CDRom?

  Andrey

  If someone will find this useful I followed this route Re: vmreconfig.pl add the device CD/DVD fails if the virtual machine created with vmcreate.pl

  and also I found good examples of what I need to in VMUtil.pm in cmd vmsphere libraries.

  Andrey

• How to create the shape layer in Adobe after effects Cs2?

  How to create the shape layer in Adobe after effects Cs2?

  There is no such thing. Shape layers were introduced in CS3.

  MYlenium

• How to expose the layers beneath the top layer

  Only, I 4 days left on my trial and should know basically how to expose and layer transition under the top layer, leaving the top layer intact. I have seen a lot of adobe and Lynda.com videos, but can't seem to find what I need.

  I have recorded a concert of piano and you want to add a vocal part and images during the performance and the end of the performance.  Some of the videos may also contain a piece of music which I can't understand.  I hope that makes sense.

  I'm looking for just a source of help, videos or web pages to guide me.  I do not line-by-line instructions here.

  Thanks for any help and God bless you,

  MarkASam888 wrote:

  I'm very new to editing video and especially After effects and maybe it's not a better method, but it works for now.

  I'm glad it works for now, but here's a point to consider for the future.  From your description of the project, it would probably easier and faster to do in editing instead of AE application.  AE is an extremely modest editor.

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• Making masters with header pinned areas appear on the top layer

  Hello

  With the help of Muse v3

  I'm using master pages to make the elements header and navigation for the most efficient workflow.

  When I then create a page and apply to the master, the main content of the page (which is scrollable) appears on the top of the item header pinned by the captain.

  
  I want to scroll, but be hidden behind the header.

  How to do it please, I missing something simple?

  Thank you

  Matt

  Hello

  The master page content is always placed at the bottom of the Muse, and we cannot change his diaper to put it on top of any other content on the pages.

  In this case, you will need to place this content separately on pages and remove it from the master page. You can select content and copy and paste inplace on all pages.

  I hope this helps.

  Kind regards

  Sachin

• Not able to be seen on top of an image with no text wrapping, prepared text box to be on the top, on the top layer and works fine with all other images with text is near or above the image in this document, PLEASE HELP

  I have an InDesign Document with a handful of images and text on the top or near the images. This should be so simple, but for some reason, I keep having this problem. There is no build-up on the given word and I can't place any text on one of the images. All the settings for all of the images in this scenario are the same. I'm fine with everything else but this one...

  I don't see any boxes hidden or anything else for that matter. I've recreated text boxes and still have the same problem it appears then disappears or I can get only part of the Word visible on the image, then a + sign comes... It should work please help. I tried to recrete this particular image and word a handful of times its just not the text box woking sometimes added a sign which does no sense, I tried a different text alignment so +... Yes indeed HELP Please thank you I can send a screen if it helps

  Have you tried select the text block, and then go to object > text frame Options and checking the checkbox ignore text dressed ?