create the user with READ only grant

Similar Questions

• Create the user with privileges only data entry.

  Hello guys,.

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Concerning

  Faisal Niazi says:

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Create 'end users' by selecting No for the user is an administrator of the workspace and the user is a developer account privilege options create new user accounts. These users connect to the APEX Application Builder. It can be given direct access to a request by specifying the ID of the application or alias to the URL:

  apex.oracle.com/pls/apex/f?p=

  or

  apex.oracle.com/pls/apex/f?p=

  Using an alias for the application is recommended.

  To restrict user access to pages, components and specific applications, create authorisation schemes and the apply to the application level.

• need to create a user with read-only access only two tables

  I am trying to create a user who has access to only two tables in a table space. Please tell me what privileges required and I need to go read on this two tables
  
  
  Best regards
  Atiq

  GRANT SELECT ON SCHEMA.TABLENAME TO USERNAME;
  

• Help!  End users with Reader only impossible to save the document that they fill out forms...?

  Hello and thank you in advance for your help!

  I have the full version of Acrobat 9 Standard, but I also have the trial version of Acrobat X Pro, in the hope that she would do what I need it to do.

  In my business, I have a 30 page document in PDF with form in all fields.  I send this form to my clients, and they fill it in, sign it and send it back.  I wish they were able to save the document so that they do not have to fill out the 30 pages together in one sitting, they can work on the forms for a bit, then reopen later.  So far, many of my clients have complained that they are unable to save the document at all.

  In addition, even if I'm here, I would also mention that I would like for these customers to put digital signatures on these documents rather than having to print, sign and scan or fax for me to hide.  I have white signature on the PDF in question, but I want to be sure that my customers end users having ONLY the reader can this sign digitally.

  Help?  Suggestions?  Thanks in advance!

  -BTM

  You must enable Extended Reader rights in Acrobat X Pro (file - save

  ACE - Reader Extended PDF - enable additional rights...) before sending the

  files of the users.

• How to create the file on a location where the user with rights?

  Hello
  I have a requirement in my application a lot of program thatcreating a report to a file and it is written in a user's location. Now he specified directly as (c:\ or d:\...).
  
  The problem is that the user does not have right to access that directory. What I suggest, or I want to create is special reports on a location where the user with rights.
  
  Essentially in Windows system % UserProfile % having right to do anyting. Assume that the operating system that is installed in C: the % UserProfile % c:\documents and Settings\nom_utilisateur or D: then D:\Document and user Settings\nom.
  
  How do I get this help please me.
  
  Good help will be appreciated.
  
  Iqbal

  Hello
  The best practice would be to create the file in My Documents for the user currently logged in windows.

  Unfortunately, you did not mention your version of forms. In an older version like 6.x it is function in the library of d2kwutil called Read_Registry in the win_api_environment section, and in the more recent versions the same availble function in the library webutil to client_ name.

  So, you can read the registry database for the current logged in user using the function mentioned above of the location next to the register.
  My Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell folders

  There is an entry named personal. Read the path of this entry when running while generating / record file to the customer's location and save the file in this path.

  -Clément

• Create a schema of the user with the same name and tables within this scheme

  I am a newbie with Oracle.
  I installed my first Oracle 10 g database in my life.
  I need to create a user and a new schema with the same name.
  Subsequently, I need to create tables in this schema using the * isqlPlus.
  I got to create the user via the Oracle Enterprise Manager Console.
  I tried to create a schema through the same tool, but I have not found a possibility to do using GUI.
  Is it possible to do so through Oracle Enterprise Manager Console?
  What are the permissions the user must have access isqlPlus to create the tables in the schema?
  
  Thank you!!!
  
  Felipe

  A schema is just a collection of objects belonged to a particular user. If you do not need to create a separate schema: the schema is created automatically when you create the user.

  To connect to the database, a user must CREATE SESSION privilege. To create a table, the user has the CREATE TABLE privilege and should be given a quota on any tablespace will be created in the table. If you don't care management quota or limit the storage space that a user can create tables, you can grant the user the UNLIMITED TABLESPACE privilege. If you care the management of quota, you must run commands like

  ALTER USER <>
    QUOTA <>
    ON <>
  

  for each tablespace for the user to be able to use.

  Justin

• Create the user by using the API OIM11g R2 with custom attributes

  Friends,
  
  I am trying to create a user using API in OIM 11 g 2 with a custom attribute.
  
  < String, Object > HashMap createUserMap = new HashMap < String, Object > ();
  createUserMap.put (UserManagerConstants.AttributeName.FIRSTNAME.getId (), "Test);
  createUserMap.put (UserManagerConstants.AttributeName.LASTNAME.getId (), "tester);
  createUserMap.put (UserManagerConstants.AttributeName.USER_LOGIN.getId (), "tester1");
  createUserMap.put (UserManagerConstants.AttributeName.USERTYPE.getId (), "End user");
  createUserMap.put (UserManagerConstants.AttributeName.EMPTYPE.getId (), "EMP");
  createUserMap.put (UserManagerConstants.AttributeName.PASSWORD.getId (), "Welcome1);
  createUserMap.put (UserManagerConstants.AttributeName.EMAIL.getId (), "[email protected]");
  createUserMap.put ("act_key", new Long("1"));
  createUserMap.put ("USR_UDF_DEPTNO", "10");
  
  Try
  {
  UserManager userService = oimClient.getService (UserManager.class);
  
  User user = new User (userLogin, createUserMap);
  Result = userService.create (user) UserManagerResult;
  System.out.println ("State of creation: '" + result.getStatus ());
  }
  catch (System.Exception e)
  {
  e.printStackTrace ();
  }
  
  But it fails with the error below.
  Create a user application cannot set or change the USR_UDF_DEPTNO attribute, since it is not defined in the corresponding dataset. : create user: USR_UDF_DEPTNO. *
  
  But this attribute exists in the IOM and I was able to create the user using the user interface with this custom attribute.
  
  Please let me know what I am doing wrong.

  You must pass a long time don't value not int. It should be that way.

  Long deptno = 1234;
  createUserMap.put ("deptno", deptno);

• Accessing the PDM in read-only mode

  Hi all.

  I have a Pix with ver 6.3 and I want to allow access to the customer in read-only mode.

  I usually don't use aaa and privileges to avoid locking issues, but now it seems that I have to face the issue.

  I have 2 questions:

  A. is the next plan safe (enough) to avoid blocking?

  1. username admin password * priv 15

  2. username pdmuser password * priv 5

  3 aaa authentication http LOCAL console

  4. level 5 privilege control?

  B. what shoul commands assign the privilege 5 level to allow the user see the welcome and the tracking completely Page?

  Thank you

  Michele

  Hi Michele,

  A. Yes, it is safe and sufficient not to lockout the pix. Infact, your console/telnet will not be affected, only the PDM with the above configuration in place.

  B. There are three levels different priv for PDM, monitor (level 3), read-only (level5) and admin (level 15). So level monitor is all that he needs to go to the Home Page and monitoring page. Here is the procedure:

  Turn on the AAA for PDM:

  -System Properties

  -Admin Pix

  Authentication/authorization

  -Check HTTP/PDM

  -Select service LOCAL group

  -Box ENBALE AUTHORIZATION

  -Select service LOCAL group

  Creatting users:

  -User-> user with level 15 and 3 (monitor) account

  Thank you

  Renault.

• How to create the user to access the web console to Vcenter Server Appliance

  The default console is located at https:// < ip >: 5480

  For VC apparatus, the user who has access by default is root. Can I create another user level system and grant him access to the console?

  I tried to create a user by useradd m consoleuser and changed the passwd... However, I am not able to connect to the web console with this user...

  On a similar note, can I give access to the console to a user of the AD?

  Concerning

  Girish

  It is probably not supported by VMware, but it seems they're locking access web console rules of pam.

  You must modify the /etc/pam.d/vami-sfcb file to change the reading of the line "auth required pam_succeed_if.so uid eq 0' to succeed/deny rule change.»

  For example, you can change the line to read "auth required pam_succeed_if.so uid > = 0' and then allow any user with a UID of 0 or more to connect to the console of the web."

• 5.1.7 server on El Capitan: create a user with a personalized folder location

  I've recently upgraded to El Capitan on my server once an apple advisor told me that 5.1.7 server had a bunch of bug fixes for Open Directory(which I plan on using down the road). Given that the Working Group Manager is not compatible with 10.11...

  Is there a way to create a user with a personalized folder location? When I create a user on the server, I can choose to create a home folder, with or without limitation in the disc or make the service of the user only. My problem is that I have no way (that I know) in the window of creating user to change the location of this folder.

  I tried to create a model of a user with a basic 'tailor-made' folder location (Volume/promised Pegasus/Home 2016 / etc...) but when I create the user, the home folder is not in the specified path.

  The "work around" I found for this batch of user is to create in the default location then move them on my raid Promise Pegasus, change the path to the advanced option to the each user and reassign the appropriate permissions.

  It is not so much a problem if I would deal with users 10. But I have to manage/create about 130-150 users every 5-6 months.

  I guess that there is an easier way to create a user with a custom home folder location. It would make sense that apple removes the Workgroup Manager and does not replace its characteristics.

  Best case scenario is that I do evil and do not hesitate to let me know if this is the case!

  Thank you

  Francis

  I may be wrong, but it seems that Workgroup Manager version 10.8 works under El Capitan: I can certainly start the application and query users / groups that are there.  I guess maybe it's on the machine as a rest to be updated periodically since days Lion... but it also shows that if you can find a copy, you may be able to run on your machine.

  HTH

• How to create the user account using the command?

  How to create the user account using the command?

  Open cmd as administrator, and then type the following commands one after the other

  NET user / add program mypassword
  net localgroup administrators program / add
  net share concfg * C:------/ grant: program, complete
  This will create a user account with the name "Program" and the password "MonMotpasse".

  You can create the user name and password of your choice.

• What should I use to create the user interface of a CEAP plugin on mac

  Hey there,

  I'm new to the development of a plugin, but I did development of script for quite a long time however. I'm tring to develop an ECAP plugin. I go to the sample project of "Panelator" (from AE CC SDK), but I don't know how to create ui for the control panel plugin stuff.

  The sample project is not an example of code to do this on a mac computer, I found the code examle for windows however.

  So, can someone generously tell me how? I had to do with cocoa? But as I understand it, I can only use Objective-C to write cocoa ui.

  Thank you very much!!!

  Hi Li Zhiqing,

  We have just announced in the next major update to AE CC signs HTML5 is supported:

  http://blogs.Adobe.com/AfterEffects/2014/04/new-changed-after-effects-CC-2014.html

  This will allow to create the user interface using HTML5 and use your scripts for the conduct of AE.  It is quite a bit easier than the use of cocoa for the construction of the UI panel.  Thoughts?

• Create the user who needs to see all Tables

  I'd like my developer to be able to view all the tables when it connects to SQL developers and browse the tables.
  What is the best that I can do this?
  
  Please see what I've done below:
  I have to create the user and granted privileges below, but he can't see any table when he opens a SQL Developer session.
  
  GRANT CREATE session, CREATE table, CREATE view,
  CREATE the procedure CREATE synonym
  To mydeveloper;
  
  The only way it can the tables so I'll give him the dba role, I don't want to do.
  
  Any suggestion?

  Hello

  If by "all tables", you mean all the tables/views in the database, including those in the SYS schema (such as V$ session) SELECT ANY TABLE are not enough. To display tables/views of SYS, you may need to look into SELECT_CATALOG_ROLE or SELECT ANY DICTIONARY. For security reasons, I prefer to create a role and grant select necessary findings and then grant this role to the developers.

  Ioan

• Possible to make an element editable for some users and read-only for others

  Is it possible to make an element editable for some users and read only for others?
  
  I was able to achieve by catches of the select statement that I used to define an authorization scheme, placing in the State of read-only element. However, I would simply refer to the authorization scheme to use caching and to help keep things cleaner for future maintenance.
  
  Is it possible for a system of authorisation under a condition similar to the way point another element can be referenced by preceding with two reference points (e.g.: P1_First_Name)?

  I accomplished this in one of my applications by setting the value of a hidden Page 0 item on connect, for example P0_ACCESS_PRIVILIGES, and then use the feature 'Read only' integrated into the APEX for each article that I don't read for some users check the value of this element.

• Change the attribute to read-only by using ClientListener?

  Hello friends of the forum...
  
  I created a form with two INPUTTEXT and put them with read-ONLY using an EL made reference to a BEAN called GENERAL Manager
  
  < af:panelFormLayout binding = "#{backingBeanScope.backing_Layout2.panelFormLayout1}" id = "panelFormLayout1" > "
  < af:inputText value = "#{bindings." Modulo.inputValue}"binding =" #{backingBeanScope.backing_Layout2.inputText1} "id ="inputText1"* readOnly =" #{General.BLock} "* / >"
  < af:inputText value = "#{bindings." Proceso.inputValue}"binding =" #{backingBeanScope.backing_Layout2.inputText2} "id ="inputText2"* readOnly =" #{General.BLock} "* / >"
  * < af:clientListener type = "dblClick" method = "activate the" / > *.
  * < af:serverListener type = "activate the" method="#{backingBeanScope.backing_Layout2.activarBloque}"/ > *.
  < / af:panelFormLayout >
  
  
  ClientListener calling Javascript Fucntion:
  
  function Activar (event) {}
  AdfCustomEvent.queue (event.getSource (), "Activar", {operation: "Create"}, false);
  }
  
  
  ServerListener call the method to change the attribute Block of GENERAL bean and also try to update panelFormLayout...
  
  {} public void activarBloque (ClientEvent clientEvent)
  * General.Block = false; *
  General.Operacion = clientEvent.getParameters ().get("operacion").toString ();
  * AdfFacesContext.getCurrentInstance () .addPartialTarget (this.getPanelFormLayout1 ()); *
  }
  
  (the block is static attribute)
  
  After I do dbClick I see general.block change its value to false but inputText don't update!...
  
  
  So, how can I force it to refresh the components when actionListener is trigger?

  Hello

  I think that in this case, you must call

  AdfPage.PAGE.addPartialTargets ()

  in JavaScript

  Frank