Similar Questions

• How to create the presentation for the columns variable and use it in the story?

  Hi all
  
  Someone knows how to create variable presentation for a column (that is, I need to create it in edit section formula itself). And then, I should use it in the Narrative section to display the value of this column. Is this possible? Or do I need to use any other variable for this requirement? If Yes please let me know, how to create it? This is a very urgent requirement.
  
  Thanks in advance
  Stephanie

  Hello
  You can have any number of columns in the narrative view, he will accept... Just mention the numbers of the columns in the view body narrative...

  check if useful/correct...

  Thank you
  prassu

• When dynamically created variables are emptied in the sequential process template?

  I have a sequence TestStand 2014 in which I dynamically create and fill many FileGlobal variables in the installation section of my main sequence.  I have it using the TestStand API to read the data in an Excel file (the data consists mainly of thresholds, limits, etc.).  The methodology itself works flawlessy.

  However, there are differences in behavior when using entry points both execution of the sequential process model.  When you use the entry point of execution 'Single Pass', he has no problem in test a DUT after another.  However, when you use the entry point for execution "Test DUT", I encounter the following error after completing of DUT1 and DUT2 testing:

  An error occurred the call 'InsertSubProperty' in 'PropertyObject' of 'NI TestStand 2014 API.

  The name of the element "VariableName" is not valid because it is already in use.

  I interpret this error message means that the variable I am trying to dynamically create the DUT2 track is already present race of DUT1.  I have a few questions about this:

  1. at what point in the sequential process template are dynamically created variables flushed, such as run a further by using 'Single Pass' starts with a clean slate?

  2. is there a reminder that I can substitute such as variables to rinse after each HAD run, allowing me to dynamically create variables on each HAD, during execution using "Test UUT?

  3. better yet, is there a counter of TestStand I can query to determine if I already ran DUT1 when using "Test DUT", such as DUT2 uses the variables that were created dynamically on trail of DUT1?

  Or you can simply use the PropertyExists function as a precondition.

  PropertyExists ("Locals.Foo")

• How to filter values using variable presentation if it uses a multiselec

  Hi gurus,
  
  Could you pls suggest me here.
  I have a requirement like my version 10G OBIEE isn't filtering report values when we choose a value any in dash prompt.
  I tried to create a variable presentation in the prompt for filtering, but invites under control, he is given a MULTI SELECT.
  I need to filter the values today if select us any value from the command prompt, it does not choose any value.
  How to filter values using MULTI SELECT Here.Please suggest me here.
  
  Kind regards
  SK

  Functions applied on the columns must be the two places (in report and guest) and must affect is fast after the function applied in the report.

  In your case is prompt value before cast, it seems that it is the reason why it does not work.

  Mark correct/good so pls help.

• Change the value of the Variable presentation

  Hello
  If I want to change the value of the variable presentation, where I can change. Means that I need to check the value of the variable presentation and then I need to change the value of the variable presentation.
  I need help from anyone.
  Thanks in advance.

  When all the choices is selected past the value zero in the variable of presentation...

  Why not consult especially column by making it is fx as a presentation...

  in any case, if need be like that you can't pass null (persons) to your title. You should change it accordingly...

  create a column in the criteria, changing it is fx to: case when ' @{Pers_Var}' is null then 'people' else ' @{Pers_Var}' end

  Call the location of the column with the text in narrative mode, then add it to made available...

• Multiple selection with Variable presentation

  Hello gurus:
  
  I currently have a dashboard where the user selects a Promotion ID and all other reports are based on this promo-id.
  
  Now, I use variable presentation for the promo-id.
  
  Now obligation if, for another page of dashboad, where a user can select up to 4 different promo-ID and compare them from the same measures.
  
  I was thinking about using PivotTable dynamic to compare and multiselect selection of promotions up to 4 guest.
  
  However I do not think that variable presentation works with multiple selection prompt.
  So, what should I do about it?
  
  I can do 4 different guests, but then it will force the user to select 4 promotions every time. I want to do something where the user can select 2,3 or 4 promotions.
  
  Please help me.
  Thank you.
  
  ~ Vinay.

  Yes, if you use the same column to create the dashboard and to create the filter.

• How to dynamically create variables of StationGlobals who are LabVIEWIOControl

  I'm looking for a way to dynamically create variables StationGlobals LabVIEWIOControl.  I know not how to create variables through "PropertyObject/SetValXXX", however I have some difficualty create variables that are custom data types.

  Thank you

  Bryon

  Bryon,

  You can use an expression as follows:

  StationGlobals.NewSubProperty("MyVariable",PropValType_NamedType,False,"LabVIEWIOControl",0)

  I hope this helps!

• Can I import this module settings to automatically create variables?

  Hi all

  I try to reuse a Labview VI within TestStand as a module of code.  There are a lot of input and output parameters, and I need to create a separate variable for most of them (probably globals file) so that I can change values dynamically during test sequences.  I see in the code module loading, associated parameters are automatically imported into the parameters of the step, but I would like to know if there is a way to automatically create variables to "convert" the parameters of the code module.  I read a few threads on the creation of dynamic variable and property magazine steps, but these do not seem to have what I'm looking for.  Please notify.  And, as usual, if it looks like I'm wrong understand how TestStand, please correct me.  I am only a few weeks to use it.  Thank you very much.

  GSinMN

  The answer is no, you can't.

  You can ask TestStand create types of complex data for you.  There is a small button next to the parameter and it will create the type definition.  However, you should always create all instances and then move those to and from the VI.

  By default, TestStand will link the error message on the wire with the Step.Result.Error.  The rest are pretty much up to you.

  I guess the question/s would be: How does he know where to create the instances?  FileGlobals? People of the country? Settings? Globals station?  Step properties?  Constant value?  There are a ton of places that seem to be the options in question.  This can be a good feature request...

• OBI, variable presentation using results

  Hello!

  I have the text field with long text strings.

  I want to get results, using the filter "contains all" by this field

  Example:

  Values
  aaaa000
  aa000aa
  bbbaa

  I have entry to filter "a0" and I want to get results according to:

  Values
  aaaa000
  aa000aa

  If the filter field will be empty, I get the error, but I want to get all the rows in the result.

  How can I do?

  I did the following:

  1. in the analysis I marked new filter, type "CONSTAINS ALL". ": number" used as a variable presentation

  

  2. I did new dashboard prompr, where I did prompt variable, named ": number", type "Variable presentation."

  

  3. I did the new dashboard, where I dragged my dashboard prompr and analysis

  Now, when the filter-field 'number' is empty, I get the error (and I agree with OLIVIER, because I did not specify the terms of null value):

  

  And when I write all values in the filter field, everything works

  

  I tried to fix it in the analysis, used 'Convert this SQL filter' and wrote the following sql text:

  "presentation_tmp"."WB_NUMBER" LIKE
  CASE
    WHEN @{:number} IS NULL THEN "presentation_tmp"."WB_NUMBER"
    ELSE concat(concat('%',@{:number}),'%')
  END
  

  But it did not help me

  How can I get all the lines, when the filter-field 'number' is empty?

  Hello

  Not really sure how you get this error when the field is empty (you should only get no result) but if you change your filter in the report to:

  WB_NUMBER contains all @{: number}

  TO

  WB_NUMBER contains all @{: number} {%}

  You should get all the values when you do not have any value in the dashboard line. Basically, put '%' in the default value of your filter.

• Variable presentation doesn't work is not in the filter using expr

  Hi friends,

  I have a quick period with a variable presentation of the v_period used. Inturn, so I applied formula below one of my measure column in the analyses below the means, it does not work when I select the name of period of command prompt. How can I place the presentation variable from the prompt for the filter with expression.

  FILTER ("Fact_GL_balances". "Actual_ending_bal" for HELP ("Dim2_GL_periods" ".") " Period_name' IN ('v_period')))

  Kind regards

  Saro

  Hi, Saro,

  I think the correct syntax when you use variable presentation would be:

  FILTER ("Fact_GL_balances". "Actual_ending_bal" for HELP ("Dim2_GL_periods" ".") " ((IN Period_name' (@{v_period})))

  OBIIE does not generate the correct syntax when you use the expression builder

  And if v_period can have multiple values, you should use this:

  FILTER ("Fact_GL_balances". "Actual_ending_bal" for HELP ("Dim2_GL_periods" ".") " ((Period_name' IN (@{v_period} [' @'])))

  I have not tried in my OBIEE because I need to filter a Dimension column, so I have to use CASES instead of FILTER, but this is my reference:

  Q & A: OBIEE OBIEE 11 g: presentation Variable initialization in a multiple selection prompt

  Concerning

  Ana GH

• What is the difference between variable presentation and application of OBIEE 11 g

  What is the difference between variable presentation and application of OBIEE 11 g

  Hello

  presentation and application of variable responses only but fluctuating demand can temporarily ignore the presentation and the session variable has nothing to do with the variables of repository.

  Everything what Oracle

  Thank you

  Prasanna

• Variable presentation

  Hello

  I have a dashboard with a prompt and a table view.

  The guest is on a column 'Year' and it is associated with a variable presentation 'yearPV '.

  My table should be:

  PRODUCTS	RECIPES	REVENUE_YEARPREC
  PAPER	50	30
  PEN	10	20

  where is the REVENUE formula: «FILTER ("measure".» REVENUE"with the HELP of 'Time '. "' Year ' = (' @{yearPV} [YYYY]")

  Now, I want to change the formula for REVENUE_YEARPREC, which is the same indicator of INCOME but the previous year, but how to subtract 1 to the presentation variable 'yearPV '?

  Thank you

  Based on your filter ' @{yearPV} [YYYY] "looks like the variable PS tank

  You must cast to int, then subtract

  «FILTER ("measure".» REVENUE_YEARPREC'with the HELP of 'Time'." (An"= cast(cast ('@{yearPV}[YYYY]' as int)-1) as char))

  Thank you

  http://cool-bi.com

• PDF created by presenter on mobile? [Android]

  Hello

  I got a large pdf file (1 GB) that was created by Presenter 7 in 2012.  He has several videos embedded, and 200 + slides. The file opens in the current Windows version of the Acrobat Reader software.

  On the Mobile Reader on my Samsung Galaxy Tab S version it shows just a blank page.

  This is expected behavior?  Can I try, or am I stuck with this file under Windows?

  Hello

  Acrobat Android currently does not support playback of the videos embedded in PDF format. But I'm not entirely sure why the pages containing the slides are not rendered. Could you share the PDF file with us so that we can investigate the matter? Since the file too large to send by e-mail, he could upload you somewhere and send us the link to [email protected]?

  Thank you

  Acrobat DC team Mobile

• What is the best software to create interactive presentations.

  What is the best software (in cloud creative) to create interactive presentations?

  Is there a combination of products?

  I'm trying to create animations, links to pages and integration of flash content in a presentation. then I have "timing" on pages and content led the way as you can in Microsoft PowerPoint?

  is there an equivalent to PowerPoint adobe? or should I merge my drawings with PowerPoint?

  You can check with Adobe InDesign CC 2014:

  Create an interactive PDF | Adobe InDesign CC tutorials

  Interactive web documents for Flash

  https://helpx.Adobe.com/InDesign/using/animation.html

• Should what product I use to create and present a series of modules with text, audio and video? As a super duper powerpoint?

  Should what product I use to create and present a series of modules with text, audio and video? As a super duper powerpoint?

  I think you could use DW, but it would be browser based and you need to understand a lot about html, css and javascript to do. Adobe Captivate seems closer to what you want: http://www.adobe.com/cfusion/search/index.cfm?term=buy+captivate&loc=en_us

  Is not part of the subscription of cloud creative and is 1000 US $ or $29.99 / month on its own...