The Windows Update components fail to install

Similar Questions

• Windows updates downloading the critical updates and fails to install several times.

  Original title : Updates the Windows Updates downloads, but will not install one of them. No error code, just fails to install one of them... many, many times.

  It is a Dell Inspiron 1525 laptop. Windows updates downloading the critical updates, but will not install one of them. Running Vista Home Premium.

  Hello

  Step 1:

  Try disabling the security software and then try to install the updates,

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Step 2:

  In addition, perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After having apres avoir effectue done the steps of troubleshooting, follow step 7 to start the computer again normally.

  Step 3:

  Please try and run the steps listed from the link below,

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  To find the error code,

  a. Click Start, then in the type of research to start, Windows update and press ENTER.

  b. click view update history.

  c. double-click the update failed, where you can find the error code.

  Reference:

  What are the error codes and how can I use them?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

• How the windows update components Lair? and how to configure update components?

  I can't update or install any application from my store of windows8.

  Then I try to fix this after I made the resolution of the problems that they

  will display the result is windows update components must be repaired or

  one or more components are configured incorrectly. What is the solution for

  This problem. How to fix windows component update?. How to he set up?

  Hello

  Thank you for helping me solve my problems on wins 8 apps store. After your replay I check my entire system, installed applications and settings, and then I see a problem with my Norton internet security. And I solved this problem. Now, I have no problem with my app store.

• Unable to do the Windows updates after I freshly installed XP

  It is a new installation on a dell computer to a xp I had on another computer that no longer works.  There has not been a single update yet. The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Original title: I was not able to do a single update.  I copied what he says and hides in the details

  It is a new installation on a dell computer to a xp I had on another computer that no longer works.  There has not been a single update yet. The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Clean install of Windows XP?  This OS is old enough that you will put on a little extra effort.

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now try to get 100 + post-SP3 updates - restart and revisit the http://windowsupdate.microsoft.com/ after each reboot site, until you have fully updated.

  Then, use the serial number of the machine to go to the they offer for that specific computer from Dell Support and drivers site and download the latest hardware.

  If go you...

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• Windows Update (KB973917) fails to install. Error code 80004005

  I use Windows Vista Home Premium 32 bit.  I try to install the KB973917 update and I get error Code 80004005.  I even downloaded the update on my desk and then tried to install but it also fails.  Is this update for Vista Home Premium 32-bit?  How can I correctly install this update if it is for 32-bit systems?

  80004005 = unknown error 0 x - can occur due to interference in the context of programs and services

  http://support.Microsoft.com/default.aspx?kbid=973917

  Windows Vista Home Premium 64-bit Edition and Windows Vista Home Premium 32-bit.

  Try to install the update in safe mode (from the update downloaded manually that you saved to the desktop)

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update (KB3147071) fails to install

  When I check Windows Update it shows in the section IMPORTANT UPDATES: "update for Windows 7 for x 64-based systems (KB3147071)"-20 MB. When I try to install it, it fails and displays "Windows Update unknown error 800b0100. Then, whenever I try to close windows, it says "do not stop computer - installation 1 1 important updates. This always occurs. Again and again and again!  How can I install this update (KB3147071) or get rid of him, so he stops trying to install when I shut down my computer?

  This isn't a significant update, it is a recommended update there is a big difference

  Go to your windows update settings and uncheck give me recommended updates the same thing...

  

  

• A fix with one click for Windows Update problems - how to reset the Windows Update components?

  I can't check, download or install updates through Windows Update.  Help!

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the button below and follow the instructions.

  
  Solve this problem

  For more details on this solution, read the article here.

• Installing the Windows update areas up to instal driver not signed.

  Original title: update

  Click microsoft virtual wifi adapter mini update driver is found but windows flashed up to not not installed unsigned how updated driver

  Hello

  Thank you for your response. Refer to the following information.

  a. go to the start menu and type cmd.exe in the search bar.

  b. right-click on cmd.exe and select run as administrator

  c. run the following command, restart the computer and check the status of the issue.

  Bcdedit.exe - set off TESTSIGNING

  I hope this helps.

• Update for Windows 8 (KB2822241) fails to install and has the error Code 800703F1

  Greetings. My system Windows 8 found a major update, but it cannot install it. The update is called "Update for Windows 8 (KB2822241)." I try to install it and it installs and I see a screen that says:
  ________________________________
  Some updates have not been installed.

  Failed: 1 update
  Examine the important updates

  Error (s) found:

  Code 800703F1 Windows Update has encountered a problem. Get help with this error
  ________________________________

  From there, I have the option to 'Try again', but when I try I always get the same result (error 800703F1). I already tried the Windows Update troubleshooting tool and whenever I run that he finds two problems and offers correct: "Repair Windows Update Database Corruption" and "repair the Windows Update components. I had it apply these patches every time, but the problem persists.

  I read about this setting by using the function "sfc/scannow", but oddly, when I try even in an elevated command prompt he also fails. It scans absolutely nothing and says: "Windows Resource Protection could not perform the requested operation."
  The 'Windows Modules Installer"service is set to"Manual"and runs, as I read it is necessary.

  What is really weird, is that in my list of installed updates, KB2822241 stands as one of the updates already installed with the name of "update for Microsoft Windows" (instead of "update for Windows 8"as one continues to try to install my PC), and when I run the independent for this update installer (I downloaded from the web site of Microsoft to try it) the installation program indicates the update is already installed, and it closes. This gave me the idea that maybe my PC is confusing one update for the other. After all, why he would find KB2822241 as an important update that it needs if it is already installed?

  I know that I can normally solve the problem of update and the question of the SFC by resetting or refresh my PC via built-in tools of Windows 8, but I don't want to go through that, unless it's the only solution. System Restore didn't help, but it is an opportunity to reinstall some other updates.

  As it is, then, the problems persist: "Update for Windows 8 (KB2822241)" settles "sfc/scannow" cannot perform the operation and not I ask.

  For the record, my machine is a 900 Asus EeePC ha with an Intel Atom N270 CPU, 2 GB of RAM, and it is running 32-bit Windows 8.

  I'd appreciate any help on this matter. Thank you in advance.

  Hi Michael,

  You can follow this link if you want to refresh your computer.

  How to restore, refresh or reset your PC

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Thank you.

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• The following updates have not been installed: updating security for Microsoft Office Web Components (KB947319)

  I don't get an installation failed message, no code error.
  The update was automatic download through Upfates.
  I have Office 2003 installed Access/Excel/Infopath/Outlook/PowerPoint/Publisher/Word
  OS is XP Professional automatic updates were turned on since day 1
  I can't find any help or support for this error, the KB document document sent me round in circles and suppose get the error codes.

  Hello

  Control Panel - Windows Updates - right click on it and HIDE

  Go here and download and install manually.

  KB947319
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=95c94c9a-6aca-42fb-9679-3234f06c72f7&displaylang=en

  NOTE the system requirements.

  MS09-043: Description of the update for Office 2003 Web Components and Office XP Web Components Security in
  Office 2003: 11 August 2009
  http://support.Microsoft.com/kb/947319

  Then reset the updates:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  -----------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The updates that fail to install.

  For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

  For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

  Do not jump.  Even if you know that you did 30 seconds before you are about to do again because you are being asked to do things.  In order...  Wait as this to blow up your weekend.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (if given the choice, you * will * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I tried to install the window updates that are available to me and they keep for lack of error code 80070641 and now I can't open Windows Mail.

  I start to install updates now for several days and each time that they do not.  Error code 80070641 rises now and I now have problems in Windows Mail.   The update was for the Windows desktop.   When I opened my Windows Mail... error codes are as follows: Socket 10061 error and Error 0x800CCC0E #.

  Hi colorfulvue,

  Welcome to the Microsoft Answers site

  I would like to know if you are using Windows Live mail or Windows mail in Windows 7.

  Windows 7 comes with windows live mail default and a default windows mail vista.

  If you use Windows live mail you will need to post your problem on this link:http://social.microsoft.com/forums/en-US/categories/

  I suggest download you Windows Installer CleanUp Utility from the Microsoft Download Center:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Disable all security software.

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Then run this:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Try to install the updates manually by downloading the stand-alone package after the reset of the windows components.

  Follow this link to learn more:http://support.microsoft.com/kb/934307

  All the best! Thanks and greetings Bika: MICROSOFT SUPPORT Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Pro fails to install automatic updates - KB2686509, KB2656370 & KB 2656353

  I tried all the solutions advocated on the Microsoft Web site and completing the program Fix - It but am still unable to install the automatic updates that keep appearing. My PC recently broke down and the PC came with XP Home version installed but I upgraded it to the Pro version, several years ago. Y at - it an easy solution that does not require expertise it knowledge. Two updates refer for .NET Framework 1.1, but I have .NET Framework 4 is installed (not that I understand what one of these components is, or even if I need them.

  Hello

  Method 1
  I suggest you to reset the Windows update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://support.Microsoft.com/kb/322756

  Method 2
  I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.
  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true