Creating a freeze frame?

Similar Questions

• How can I control the size of the BMP file created by freeze frame tool?

  I use the first 13 items on Windows 7

  When I run the tool freeze frame it creates a still image (bmp file) from an image in my video clip.

  The bmp file size can vary from 6076 KB, 2701 KB or KB 1013 and seems to be independent of the type of item (MPEG, MOV, AVI), size (1366 x 768, 1280 x 720, 1920 x 1080, 320 x 180, 720 x 480) or rate (29.97, 29,55. (29.04 25.00, 24.00) video.

  The size of the image seems to depend on the project folder, in which it was created.  The same clip can produce a 6076 bmp or bmp file 2701 whereby one project (prel) the tool Freeze Frame files was performed.

  
  

  I searched everywhere for a project setting that could establish a size by default files for output, but it seems not to be.

  
  

  Is it possible to control the size of the bmp file generated by freeze frame?   I need consistency,

  
  

  Thank you.
  

  David_F wrote:

  ..... For example, text on a 2701 KB file annotations appear more important than those on the 6071 KB file when clips of two different subprojects are combined in the master.

  .. .dimensions of image file 6076 KB (20 x 11/5 inches)

  Re thinking, try a few things and this sentence convinces me that you mix dimensions of the image in pixels and the size of the file in KB.   In addition, digital images have in. up to put on paper or screen.  All they have is the pixel dimensions.  Each pixel can have a lot or little information based on the color, brightness, etc. so the KB of size can vary even if the pixel dimensions only.

  I've set up a project in 640 x 480, put in a clip and freeze box a. BMP.  If you look at a file in Explorer and you pass the mouse over it, you get a date, size in pixels and size KB.  The result (you can see in the picture as an attachment) is the file with an image of 640 x 480, as the setting for the project.  In this case, a 900KO file size was necessary to store the data of this particular framework.

  If Visio is happy with JPEG files, there is a way through the publication & share > Image to better control the dimensions in pixels with settings under the Advanced button.  Using this method, I made a jpeg from the same exact with 1920 x 1080 pixel frame and 1,2 MB in file size.

  I am convinced that your changes in the size of the text are due to dimensions in pixels and have nothing to do with the size of the file.  Of course I was wrong more than once and tips can be useful what you actually pay!

• Freeze Frame | .bmp file. Where? Why?

  First Elements 14.

  I use a title of movement. For background, I selected the option to freeze frame. I saved and closed the project. Later, when I opened the project, he asked "where is FreezeFrame_16.bmp? He was looking for the file.

  I have not added support to the project which are .bmp files. When you apply the freeze frame option, first 14 elements create a .bmp file? If so, where it stored?

  Thank you.

  Yes EP creates a bmp.

  Its either exported to the hard disk or inserted in the film and placed on the hard drive.

  If you (I forgot you) removed from the hdd PE will never be found.

• SWF generated by CP freezes frames in parents onEnterFrame()

  Hi guys.
  
  This is for those of you who are familiar with actionscripting (I use AS2). Please see the attached code.
  
  Quick explanation of the object; I have a 'wrapper' generated Flash - SWF that contains a placeholder movieclip where I load in the Captivate SWF. In the 'wrapper', I put related code. I have a table with values loaded from a XML, which will be presented in a text field, once to reach spesific points in the number of images of the Captivate SWF file.
  
  Here's the question; With a Flash generated SWF loaded in space reserved MovieClip as well (named "screen" in the code) is perfect. However, with a Captivate SWF generated, there is a strange question. The onEnterFrame function will freeze on a certain image and keep repeating, while playback continues as if nothing is wrong. So while playing the SWF file is perfect, the trace that I put in the code gives the impression of the gel clip - that is not the impression I get from the monitor display. I created a debug-SWF with Captivate, containing a frame counter to check and it continues rolling even if the trace of the mother told me that the screen is blocked at a certain range.
  
  Here is the output generated by the attached code;
  
  (...)
  I have = 0
  No match; 0.0666666666666667 does not match 0.1
  I have = 1
  No match; 0.0666666666666667 does not match 1.2
  I have = 2
  No match; 0.0666666666666667 does not match 8.5
  I have 3 =
  No match; 0.0666666666666667 does not match 13.5
  I have = 4
  No match; 0.0666666666666667 does not correspond to 18.5
  I have = 5
  No match; 0.0666666666666667 does not match 23.5
  I have = 6
  No match; 0.0666666666666667 does not match 28.5
  I have 7 =
  No match; 0.0666666666666667 does not match 33.0
  I have = 0
  FOOTBALL GAME! Text: This text is XML.
  I have = 1
  No match; 0.1 does not correspond to 1.2
  I have = 2
  No match; 0.1 does not match 8.5
  I have 3 =
  No match; 0.1 does not match 13.5
  I have = 4
  No match; 0.1 does not correspond to 18.5
  I have = 5
  No match; 0.1 does not match 23.5
  I have = 6
  No match; 0.1 does not match 28.5
  I have 7 =
  No match; 0.1 does not match 33.0
  I have = 0
  (...)
  
  ... and then it suddenly freezes frame 37 (either 37 spread over 30 - who is the framecount - to give the position in seconds) and begins to repeat the following output again and again;
  
  I have = 0
  No match; 1.23333333333333 does not match 0.1
  I have = 1
  No match; 1.23333333333333 does not match 1.2
  I have = 2
  No match; 1.23333333333333 does not match 8.5
  I have 3 =
  No match; 1.23333333333333 does not match 13.5
  I have = 4
  No match; 1.23333333333333 does not correspond to 18.5
  I have = 5
  No match; 1.23333333333333 does not match 23.5
  I have = 6
  No match; 1.23333333333333 does not match 28.5
  I have 7 =
  No match; 1.23333333333333 does not match 33.0
  
  A file generated by Captivate freezes frame 37, another frame of 49. I see no reason to do so. Any suggestions on what is happening and how to avoid it?
  
  All entries are much appreciated.
  
  ____________

  Blush.

  Now, I'm a little embarrassed. Of course, a file generated by Captivate SWF will prefer the rdinfoCurrentFrame on _currentframe. What I should have to remember.

  Sorry guys. Thanks anyway.

• When you export (share) a project, how to choose the thumbnail of the freeze frame which restores the clip?

  I just shared (exported) a project that is a simple take a clip for a friend who has downloaded on its website. The problem is that, when the video ends by playing on his site, he returned to a freeze frame that seems completely random and is not the image I want. How to choose the exact image that the video will return as "thumbnail by default?"

  Thank you

  Kevin

  Cannot set lla at the FCC. Many layout site Web apps will allow you to set the poster frame for the video files.

• When you add a freeze frame, where it is saved to?

  Successfully, I right click on 'Add Freeze Frame' in order to capture a still of my movie, but now I can't find the frozen real framework.

  Where it is saved to?  Thank you.

  You must share the still picture if you want a jpeg image. Select the still image in your timeline and click the part above the observer. Select the image and a window will appear and you can name the image and where to save it.

• freeze frame set to 5 seconds AGAIN...

  freeze frame set to 5 seconds AGAIN... When you add freeze frame only a tiny part of an element is inserted.

  ?

  H: great is it? Exactly what number you set in preferences? Maybe a screenshot.

• Freeze frame layer twinkle in gamma (?) when following a null value

  I thought I solved the problem by changing the quality and sampling area, but there are still questions, including a slight deformation based on casual. Any suggestions? I tried rendering framework, and with that same question. If I unparent it to my null value, the layer is a freeze frame plain ol again. The first image is fine, the following conditions are significantly different. The circulation area is low and there is no motion blur. The Null value is animated in the Position, scale and Rotation. I tried to disable rotation and scale, the problem persists.

  I had the help of Robert Kjettrup, who suggested that the problem was due to the complexity of the noise in the particular image I've used. Keeping this aspect, he proposed to conceal the lack of precision with a separate (unprocessed) layer which has been re-grainy, then use a mask of track in the areas you will need to re-grain with this layer.

  I normally Denoise my images, but in this case I had left it the shot as he was, so I was not used to meet a problem like this. Thanks also to Rick Gerard for his help also.

• Freeze Frame questions

  I began with a clip of a person running, I have split the clip, deleted part and uttered the 2 collars to back together. I then duplicated the bottom layer and right-click > time > freeze frame

  1. how hide you the still image in the layers? I try to hide the duplicate layer and that it does not. I went ahead and hid all my layers and the still picture is still there.

  2. the default duration of freeze frame was 0:00:05:14 I double-clicked on the small square on the layer time remapping and changed to 0:00:00:30 just a test, and when I go back to check it out, it's still now showing 0:00:01:06 and it displays any other freeze frame in the Composition window?

  Thanks in advance for any help.

  Jeff Wright wrote:

  Now just for clarification, I duplicated a layer and make a stop on image where was the read head and the entire layer became the freeze frame, so it is more video. Is it the way it is supposed to be?

  Yes. It's precisely what you were asking to do.

  If you want the video to play down there and THEN it freezes, you have options.

  Option 1: Apply the time remap your video layer. Set a new keyframe for the time remapping effect to the place you want it freezes. Delete all future keyframes.

  Option 2: Divide your video layer (Ctrl + Shift + D on Windows, command + shift + D on Mac) to where you want the freeze frame and apply fixed as you did in the new layer.

  There are a few other ways, but these two are the most simple.

  Jeff Wright wrote:

  I want to use the stylus to rotoscoping the freeze frame. Regardless of where the current-time indicator is at the stop on image when I start using the pen tool? It seems that I do rotoscoping standing on entire image?

  It does not matter where ICT is when you use the pen tool. A mask will be applied to the whole layer. If you want a mask to animate, you can keyframe the mask path property.

• "Freeze frame" aspect ratio problems what I am doing wrong?

  I downloaded a video short test showing my camera in the mirror.

  The video camera is a Sony HDR-CX320E (the ' E' for Europe)

  The camera settings were;

  Record = HQ Standard

  Frame rate = 50i

  HD / MP4 Standard = HD

  X - V color = WE

  PE9 project settings have been set to

  PAL (I'm in the United Kingdom)

  AVCHD

  1080i 25

  When I get media and drag it to the timeline PE9 is happy with it, I did not ask if I want to change the project settings.

  So far so good...

  In the first screen clip above, you will see the skin round my camaraas seen in the mirror lens.

  Then, below, I took a "freeze frame" wink as usual and checked (checked) the "Edit in Photoshop after insertion of" box.

  

  And once again, supra, it is very well... well...

  

  Above, what the "Freeze frame" resembles the lime of time, it seems quite normal.

  But as you know when you ask the retouching in Photoshop Elements image opens immediately in the stills of edition

  

  Above, this is the problem that I get.

  This is how I see the image in Photoshop Elements

  The proportions of the image changed makes taxable to any convenient mounting.

  If I change the image, the aspect ratio returned to normal when the image is visible in the lime time and main display.

  I tried to make the "freeze frame" image before calling so that it can be edited in Photoshop, but which made no difference.

  Moreover, the above project and camera settings work fine in all other respects and if I add graphics they are in the right position when I download my videos on YouTube (I download on YouTube using the 1920 X 1080 HD, otherwise the graphics are misplaced)

  So what I am doing wrong guys?

  Kind regards... Andy

  Andy,

  Thanks for the follow up messages.

  According to the instructions of the SG... This should work for you with your description of your workflow

  a. project Preset and Source Media... HD 1440 x 1080 anamorphic 16:9

  b with the video on the timeline, the share/computer science/Image and the preset group JPEG HD 1920 x 1080.

  If you import that jpg 1920 x 1080 16:9 in a project from Photoshop Elements or look in the viewer computer, it should present only 1920 x 1080 16:9

  I have Photoshop Elements 9 and Premiere Elements 9.0/9.0.1 and road found the road.

  What is the status on your passage at 1920 x 1080 as a way of taking your camera so that you will avoid this kind of problem if you do a lot of frozen images and want to use the integration of the first elements Photoshop Elements to edit these frozen images.

  Looking forward to your results.

  RTA

• Double-click to match the ends of the clip in freeze frame

  Hello

  I want to open a clip in the timeline in the source window (to see the applied filters, for example). I double-click on it - and get a freeze frame of a clip which certainly do not match that I clicked on (and use) in the timeline panel. I have to close the application to get the good clip, but after working for a while I ´ll end in the frozen not corresponding (with audio, funny enough).

  What that?

  (PP 5.5 Mac OS 10.6.8 Octa 2.66 Ghz, 32 GB Ram, quadro 4000)

  If you want a matching frame of a clip in the timeline panel in the source monitor, you must first close the element in the source monitor.

  And then double-click.

  If you use the shortcut M you get a matching frame of the clip in the project bin in the source monitor.

  I like to open the clip in the monitor of souce with frame corresponding to add clip markers.

  Always having the corresponding frame by double-clicking the item in the timeline (without having to first close the clip in the source monitor Panel) used in Pro2 that Adobe has stopped this feature.

  I miss her dearly.

  Unfortunately the source monitor Panel does not indicate the effects added, makes the program monitor.

  If you want to see the effect just press play.

• Creating a simple IMAGE FREEZE FRAME video

  Hi, I know it's super simple, just do not know how to do

  I want to create a frozen image of my video footage in Premiere Pro.

  What is the best way?  and what type of file is it turn out to be?

  Thank you

  As soon as the CTRL-M line, then use the settings that you like. BMP, TIFF. what you want from the list of options.

• The Devs creating their active Frame for a separate QML file covers? I'm stuck

  Bit in trouble, I do my best to bring my Apps support 10.2.1 10.2.2 I practically everything by working the * beep * covers Active, I did do a check and create the file QML according to less than 10.3 or greater

   ComponentDefinition {
              id: creator;
              source: ""
              function createQMLObject(sourceUrl){source=sourceUrl; creator.createObject()}
          }
  

  Feel free to use that btw ^.

  if(olderFirmware===true)  Application.setCover(creator.createQMLObject("CoverOlderFirmware.qml"))
          else{Application.setCover(creator.createQMLObject("Cover.qml"))}
  

  Now for some reason, they do not work, they seem to be created, but do not want to show, normally I would create it from my main.qml but the passport and its lid Multi forced me to separate the covers in their own QML files

  Begins like (not included UI code)

  import bb.cascades 1.2
  
      SceneCover {
          id: large
  
          content: Container {
              background: Color.create("#000000")
              layout: DockLayout {}
  }
  }
  

  Place in a container gives me a weird error on not able to create a list in an object, probably referring to MultiCover and SceneCover as a child of the container.

  Any suggestions?

  I use active selector to do this, find in this application example:
  https://github.com/RodgerLeblanc/AssetSelector

  This method can support 10.2.1 users and below, don't forget to add the lines of c ++ this blog:
  https://bb10code.WordPress.com/2014/12/10/active-frame-made-easy/

  Check your email, I also sent you something on your last post on the forum.

• Cannot create layers CS6 frames

  I watched several tutorials saying to create a gif in Photoshop CS6, you just open the timeline palette and select 'Create frames from Layers' in the menu dropdown. I don't see this option, not even in gray. What is the problem?

  

  "Have you clicked on the" create the Animation of image "-button again?

• create pauses between frames on windows movie maker

  I am doing a project on Windows Movie Maker and I can't figure out how to lengthen the time you can see each image, some need to be longer than the other frames

  I am doing a project on Windows Movie Maker and I can't figure out how to lengthen the time you can see each image, some need to be longer than the other frames

  =====================================
  Vista Movie Maker 6?

  For the timeline, move the pointer over the edge of
  a photo and you see a double arrow... then you
  can drag the edge of the photo to increase/decrease
  the duration. A ToolTip should appear and display
  change.

  Windows Live Movie Maker?
  See the following video tutorial.

  Windows Live Movie Maker - Photo duration
  http://www.YouTube.com/watch?v=NvV25rY5o2g