freeze frame set to 5 seconds AGAIN...

Similar Questions

• "Freeze frame" aspect ratio problems what I am doing wrong?

  I downloaded a video short test showing my camera in the mirror.

  The video camera is a Sony HDR-CX320E (the ' E' for Europe)

  The camera settings were;

  Record = HQ Standard

  Frame rate = 50i

  HD / MP4 Standard = HD

  X - V color = WE

  PE9 project settings have been set to

  PAL (I'm in the United Kingdom)

  AVCHD

  1080i 25

  When I get media and drag it to the timeline PE9 is happy with it, I did not ask if I want to change the project settings.

  So far so good...

  In the first screen clip above, you will see the skin round my camaraas seen in the mirror lens.

  Then, below, I took a "freeze frame" wink as usual and checked (checked) the "Edit in Photoshop after insertion of" box.

  

  And once again, supra, it is very well... well...

  

  Above, what the "Freeze frame" resembles the lime of time, it seems quite normal.

  But as you know when you ask the retouching in Photoshop Elements image opens immediately in the stills of edition

  

  Above, this is the problem that I get.

  This is how I see the image in Photoshop Elements

  The proportions of the image changed makes taxable to any convenient mounting.

  If I change the image, the aspect ratio returned to normal when the image is visible in the lime time and main display.

  I tried to make the "freeze frame" image before calling so that it can be edited in Photoshop, but which made no difference.

  Moreover, the above project and camera settings work fine in all other respects and if I add graphics they are in the right position when I download my videos on YouTube (I download on YouTube using the 1920 X 1080 HD, otherwise the graphics are misplaced)

  So what I am doing wrong guys?

  Kind regards... Andy

  Andy,

  Thanks for the follow up messages.

  According to the instructions of the SG... This should work for you with your description of your workflow

  a. project Preset and Source Media... HD 1440 x 1080 anamorphic 16:9

  b with the video on the timeline, the share/computer science/Image and the preset group JPEG HD 1920 x 1080.

  If you import that jpg 1920 x 1080 16:9 in a project from Photoshop Elements or look in the viewer computer, it should present only 1920 x 1080 16:9

  I have Photoshop Elements 9 and Premiere Elements 9.0/9.0.1 and road found the road.

  What is the status on your passage at 1920 x 1080 as a way of taking your camera so that you will avoid this kind of problem if you do a lot of frozen images and want to use the integration of the first elements Photoshop Elements to edit these frozen images.

  Looking forward to your results.

  RTA

• SWF generated by CP freezes frames in parents onEnterFrame()

  Hi guys.
  
  This is for those of you who are familiar with actionscripting (I use AS2). Please see the attached code.
  
  Quick explanation of the object; I have a 'wrapper' generated Flash - SWF that contains a placeholder movieclip where I load in the Captivate SWF. In the 'wrapper', I put related code. I have a table with values loaded from a XML, which will be presented in a text field, once to reach spesific points in the number of images of the Captivate SWF file.
  
  Here's the question; With a Flash generated SWF loaded in space reserved MovieClip as well (named "screen" in the code) is perfect. However, with a Captivate SWF generated, there is a strange question. The onEnterFrame function will freeze on a certain image and keep repeating, while playback continues as if nothing is wrong. So while playing the SWF file is perfect, the trace that I put in the code gives the impression of the gel clip - that is not the impression I get from the monitor display. I created a debug-SWF with Captivate, containing a frame counter to check and it continues rolling even if the trace of the mother told me that the screen is blocked at a certain range.
  
  Here is the output generated by the attached code;
  
  (...)
  I have = 0
  No match; 0.0666666666666667 does not match 0.1
  I have = 1
  No match; 0.0666666666666667 does not match 1.2
  I have = 2
  No match; 0.0666666666666667 does not match 8.5
  I have 3 =
  No match; 0.0666666666666667 does not match 13.5
  I have = 4
  No match; 0.0666666666666667 does not correspond to 18.5
  I have = 5
  No match; 0.0666666666666667 does not match 23.5
  I have = 6
  No match; 0.0666666666666667 does not match 28.5
  I have 7 =
  No match; 0.0666666666666667 does not match 33.0
  I have = 0
  FOOTBALL GAME! Text: This text is XML.
  I have = 1
  No match; 0.1 does not correspond to 1.2
  I have = 2
  No match; 0.1 does not match 8.5
  I have 3 =
  No match; 0.1 does not match 13.5
  I have = 4
  No match; 0.1 does not correspond to 18.5
  I have = 5
  No match; 0.1 does not match 23.5
  I have = 6
  No match; 0.1 does not match 28.5
  I have 7 =
  No match; 0.1 does not match 33.0
  I have = 0
  (...)
  
  ... and then it suddenly freezes frame 37 (either 37 spread over 30 - who is the framecount - to give the position in seconds) and begins to repeat the following output again and again;
  
  I have = 0
  No match; 1.23333333333333 does not match 0.1
  I have = 1
  No match; 1.23333333333333 does not match 1.2
  I have = 2
  No match; 1.23333333333333 does not match 8.5
  I have 3 =
  No match; 1.23333333333333 does not match 13.5
  I have = 4
  No match; 1.23333333333333 does not correspond to 18.5
  I have = 5
  No match; 1.23333333333333 does not match 23.5
  I have = 6
  No match; 1.23333333333333 does not match 28.5
  I have 7 =
  No match; 1.23333333333333 does not match 33.0
  
  A file generated by Captivate freezes frame 37, another frame of 49. I see no reason to do so. Any suggestions on what is happening and how to avoid it?
  
  All entries are much appreciated.
  
  ____________

  Blush.

  Now, I'm a little embarrassed. Of course, a file generated by Captivate SWF will prefer the rdinfoCurrentFrame on _currentframe. What I should have to remember.

  Sorry guys. Thanks anyway.

• set up a second person in Windows 7

  I just installed Thunderbird and set up for me OK. I want to configure my wife's account. We use Windows 7

  I have to re - download the program again?

  I feel like a dunce. Mozilla thought a second user and when I opened the icon of the user of my wife, he was already a Thunderbird icon. I clicked on the icon and set up the second account. Thanks for the trouble

• When you export (share) a project, how to choose the thumbnail of the freeze frame which restores the clip?

  I just shared (exported) a project that is a simple take a clip for a friend who has downloaded on its website. The problem is that, when the video ends by playing on his site, he returned to a freeze frame that seems completely random and is not the image I want. How to choose the exact image that the video will return as "thumbnail by default?"

  Thank you

  Kevin

  Cannot set lla at the FCC. Many layout site Web apps will allow you to set the poster frame for the video files.

• Windows freezes for 5 to 10 seconds every few minutes.

  After the upgrade to Win 8.1, I had some experiences with my computer freezing for 5 to 10 seconds every few minutes. Music continues to play, the cursor keeps blinking (although sometimes it freezes too) and the mouse can be moved, but try typing don't work and try to close, open, move or otherwise interact with the programs (applications office and modern) fails. Then, at the end of the gel in short, everything what has been done during freezing happens everything both. Restart breeze the trend until it starts again (sometimes hours later, other time days).

  It seems to be overheating problems and SFC came clean the problem only arose recently (well that before, it happened sometimes with IE only but who stopped). I'm not running 3rd party antivirus and Defender is coming clean, and so have free McAfee scan.

  My computer is a Dell XPS 1520 running Windows 8.1 update update 1.

  One last note, the problem seems to occur sometimes when I use Windows built-in backup of the file system. I can't actually think any time it all started when I was not hung on the backup media, even if it persists after the disconnection. I used three different types of backup media, so I don't know if one of the drives is the cause, but I will deal with that now.

  OT: Occasional Windows freezes

  Hello

  This issue could be due to various reasons like virus on the computer, the program of third at the origin of the problem.

  I suggest you try the steps from the following link:

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286

  Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Freeze frame layer twinkle in gamma (?) when following a null value

  I thought I solved the problem by changing the quality and sampling area, but there are still questions, including a slight deformation based on casual. Any suggestions? I tried rendering framework, and with that same question. If I unparent it to my null value, the layer is a freeze frame plain ol again. The first image is fine, the following conditions are significantly different. The circulation area is low and there is no motion blur. The Null value is animated in the Position, scale and Rotation. I tried to disable rotation and scale, the problem persists.

  I had the help of Robert Kjettrup, who suggested that the problem was due to the complexity of the noise in the particular image I've used. Keeping this aspect, he proposed to conceal the lack of precision with a separate (unprocessed) layer which has been re-grainy, then use a mask of track in the areas you will need to re-grain with this layer.

  I normally Denoise my images, but in this case I had left it the shot as he was, so I was not used to meet a problem like this. Thanks also to Rick Gerard for his help also.

• How can I control the size of the BMP file created by freeze frame tool?

  I use the first 13 items on Windows 7

  When I run the tool freeze frame it creates a still image (bmp file) from an image in my video clip.

  The bmp file size can vary from 6076 KB, 2701 KB or KB 1013 and seems to be independent of the type of item (MPEG, MOV, AVI), size (1366 x 768, 1280 x 720, 1920 x 1080, 320 x 180, 720 x 480) or rate (29.97, 29,55. (29.04 25.00, 24.00) video.

  The size of the image seems to depend on the project folder, in which it was created.  The same clip can produce a 6076 bmp or bmp file 2701 whereby one project (prel) the tool Freeze Frame files was performed.

  
  

  I searched everywhere for a project setting that could establish a size by default files for output, but it seems not to be.

  
  

  Is it possible to control the size of the bmp file generated by freeze frame?   I need consistency,

  
  

  Thank you.
  

  David_F wrote:

  ..... For example, text on a 2701 KB file annotations appear more important than those on the 6071 KB file when clips of two different subprojects are combined in the master.

  .. .dimensions of image file 6076 KB (20 x 11/5 inches)

  Re thinking, try a few things and this sentence convinces me that you mix dimensions of the image in pixels and the size of the file in KB.   In addition, digital images have in. up to put on paper or screen.  All they have is the pixel dimensions.  Each pixel can have a lot or little information based on the color, brightness, etc. so the KB of size can vary even if the pixel dimensions only.

  I've set up a project in 640 x 480, put in a clip and freeze box a. BMP.  If you look at a file in Explorer and you pass the mouse over it, you get a date, size in pixels and size KB.  The result (you can see in the picture as an attachment) is the file with an image of 640 x 480, as the setting for the project.  In this case, a 900KO file size was necessary to store the data of this particular framework.

  If Visio is happy with JPEG files, there is a way through the publication & share > Image to better control the dimensions in pixels with settings under the Advanced button.  Using this method, I made a jpeg from the same exact with 1920 x 1080 pixel frame and 1,2 MB in file size.

  I am convinced that your changes in the size of the text are due to dimensions in pixels and have nothing to do with the size of the file.  Of course I was wrong more than once and tips can be useful what you actually pay!

• Freeze Frame questions

  I began with a clip of a person running, I have split the clip, deleted part and uttered the 2 collars to back together. I then duplicated the bottom layer and right-click > time > freeze frame

  1. how hide you the still image in the layers? I try to hide the duplicate layer and that it does not. I went ahead and hid all my layers and the still picture is still there.

  2. the default duration of freeze frame was 0:00:05:14 I double-clicked on the small square on the layer time remapping and changed to 0:00:00:30 just a test, and when I go back to check it out, it's still now showing 0:00:01:06 and it displays any other freeze frame in the Composition window?

  Thanks in advance for any help.

  Jeff Wright wrote:

  Now just for clarification, I duplicated a layer and make a stop on image where was the read head and the entire layer became the freeze frame, so it is more video. Is it the way it is supposed to be?

  Yes. It's precisely what you were asking to do.

  If you want the video to play down there and THEN it freezes, you have options.

  Option 1: Apply the time remap your video layer. Set a new keyframe for the time remapping effect to the place you want it freezes. Delete all future keyframes.

  Option 2: Divide your video layer (Ctrl + Shift + D on Windows, command + shift + D on Mac) to where you want the freeze frame and apply fixed as you did in the new layer.

  There are a few other ways, but these two are the most simple.

  Jeff Wright wrote:

  I want to use the stylus to rotoscoping the freeze frame. Regardless of where the current-time indicator is at the stop on image when I start using the pen tool? It seems that I do rotoscoping standing on entire image?

  It does not matter where ICT is when you use the pen tool. A mask will be applied to the whole layer. If you want a mask to animate, you can keyframe the mask path property.

• How to set up a second music library on drive ext

  How can I set up a second library music on external drive?

  2006MacBook OS 10.6

  Launch iTunes with down option, click on create a library and choose a location on it.

  (144334)

• When you add a freeze frame, where it is saved to?

  Successfully, I right click on 'Add Freeze Frame' in order to capture a still of my movie, but now I can't find the frozen real framework.

  Where it is saved to?  Thank you.

  You must share the still picture if you want a jpeg image. Select the still image in your timeline and click the part above the observer. Select the image and a window will appear and you can name the image and where to save it.

• Play NFS on the Satellite X 200 screen freezes shortly every 2-3 seconds

  I recently bought a Satellite X 200 with 2 x GeForce 8600 M GT in SLI.
  Due to the power of 2 graphics cards, I thought about playing games would be no problem.
  But it's not...

  I just bought Need For Speed - Pro Street and installed on my computer. I can't play the game, without the screen freezes shortly every 2-3 seconds.
  It seems that there is not enough power visually, but with 2 x 8600M GT in SLI? Will not take the game run smooth without delay?
  I have all the settings at low temperature and/or offshore, trying to see if that would solve the problem - but no.

  The menus and the intro works very well, but when driving cars in the game, it starts to lag.
  I've updated to latest drivers, but which did not help either.
  My OS is Windows Vista Home Premium, and my memory is 2 GB.

  A problem like this?

  Hmm I think that it of because of Vista.
  I read a lot of articles on issues such games on Vista OS.

  I found some Vista patches and patches but I really not 100% sure if this QFE have reason.

  -http://support.microsoft.com/kb/936710/en-us
  -http://support.microsoft.com/kb/945149/en-us
  -http://support.microsoft.com/kb/936613/en-us
  -http://support.microsoft.com/?scid=kb%3Ben-us%3B940105&x=11&y=9

  PS: on this page you will find an interesting discussion about the game on Vista OS
  078 http://www.Computerworld.com/action/article.do?command=viewArticleBasic&articleId=9011 & pageNumber = 1

  Hope that this could clarify the issue

• Audio Software OR Traktor - freezes for about half a second because of Dual Core

  Hello

  I've been test Native Instruments Traktor DJ Studio 3 and very often the audio timeline would freeze for about half a second and the game continues. I also have a good low latency soundcard PCI card, so that does not these breaks.

  I managed to get rid of this problem by disabling the second processor core in the BIOS setup. However, I don't like the fact that I'll have to do each time that I use Traktor.

  Is it a hardware problem or software? Software that does not use the two hearts should be able to run without problems, but apparently, there are a few interruptions happening that prevent some programs smoothly.

  That's why I'm posting here instead of the forums of NOR.

  Hello

  Why wouldn't be a hardware problem?
  The fact is that the processors with dual core Intel design and it will appear in Device Manager. Also I m sure that Intel will design with double CPU and core more in the future.

  However, I think and I'm sure it's only a software problem. Software developers have overlooked this fact that there could be another type of processors. In my opinion, you must contact the software manufacturing support to clear this problem. Maybe a few updates are available.

  That's all I can suggest.

• I'm trying to set up a second computer on my wireless connection. How to get my security code?

  Internet

  I'm trying to set up a second computer on my wireless connection. How to get my security code?

  http://www.practicallynetworked.com/sharing/xp_ics/

• Setting up the second hard drive preinstalled

  I have a Pavilion m9250f equipped of Windows Vista 64-bit with two 500 GB hard drives.  The first hard disk is almost at capacity (available 15%), and I want to know how to set up the second disc for use.

  Hello

  The SATA controller mode setting is in the bios. F10 will get you into the bios. Back up your data before attempting to make any changes.  If you use the RAID mode then then you will need to enter the Intel RAID CTRL + I utility at startup to disable the parring.  RAID 1 is extra protection in case you have a hard drive failure.  If you disable the RAID 1 parring so be sure to perform backups at a frequency you can live if you experience a hard drive failure.  When the RAID 1 parring is disabled, then the second hard drive will be available for data storage (more than 500GB).  If get you there, then you can do a quick format on the second hard drive.  Now you should be able to move the folders you want to the second hard drive.