Creating a model without sewing

Similar Questions

• Tile pieces disappears from the model without sewing when cropping to make repeatable 1

  Hello

  I am trying to create the personalized wrapping paper. I used the following tutorial to create:

  Illustrator CS5 tutorial - learn the model color chart in less than 3 minutes - YouTube

  I was able to successfully model seamless (Appendix 1), but when I try to crop to create a tile which can repeat itself so transparent (01:58), he removes the point on the top of all i (see annex 2).

  How can I fix this? Thank you!

  

  

  bfcreativenyc,

  As far as I can see on the image in the op, you all so that you get good repetition, if the rectangle of nostroke/nofill contains two flowers and two hearts / I love you. I think that's what we both say.

• Creating a model of check tablecloth

  Hello

  I would like to create a template so that I can fill a big rectangle with it and have it look like a slick tile.

  I have attached a picture of the idea of the ground, well the model that I created and the result, which came not as I wanted. How can I get it to be transparent (repeated without pause)?

  Thank you!

  

  For a model without sewing, you have the model tile put in place correctly. You only need to create a corner of the check pattern it correctly.

  

• Rename the Service profile after creating through model

  Hello

  first... I found a discussion earlier, but from 2010, so he's changed a lot. At that time, it was scheduled for a future implementation

  Creating profiles of server through service templatesalways adds a number (based on how to generate profiles).

  But I don't need this number. We have a nameconvention for servers on ends with a zero (such as abcd9000).

  So, how can I use the models without numbers (leaving blank does not work) .or how can I change the name of the new profile service?

  We run on the 1.4(3q) Version.

  Concerning

  Silvio

  Currently, it is not possible to rename the objects. What you can do here, use the creation of a Clone function that is available when you click on a Service profile existing (SP). This gives you the opportunity to choose a new name altogether and the location of the SP.a cloned. It is very useful if you use address pools in the SP master because the cloned SP automatically borrows a same pool addresses. If you're bored after clicking on create a Clone of 30 times, it's something that you can easily automate with the power of the UCS Toolkit (unit Powershell cmdlets 1300 +).

• create image disk without unused space

  Hello

  I don't find any response to this question except what makes a blank image with utility app and drag-and - drop the files but I can't imagine there is not a better solution to create a disk without unused space image. I turn with SD card a lot and need to backup these discs without unused space. Is there a solution?

  Thank you if you have an idea

  Samuel

  If you create a disc from a device image, it won't take as much space being * used * on this unit, not the total capacity of the card.

  In disk utility, file-> new Image-> < device name > Image

• Why my mac does not create a document without a title when I print? I must go to my downloads and sending them to the Recycle Bin manually.

  I'm about 10 days during which my office converted from windows to mac. A question is: whenever we print desktop mac OS X from Yosemite to one of the benefits of HP color laser jet MFP M477fnw 2, our mac creates a document without title that it sends to my downloads. I have to then go to my downloads and manually delete these docs (send to the trash).  They are labeled: report.2.pdf, report.3.pdf, report.4.pdf, ect... with every single print job numbers. Is there a way I can stop these files cluttering up my downloads?  Thank you.

  Try the search and post here.

  -Support of Microsoft Office for Mac

  -Support of Microsoft Office for Mac (2)

• I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?

  I have a distribution list large email I want to create, BUT I don't necessarily want to put in my Contacts and all this My Contact list of people synchronized upward with my iPhone. Can I create a group without their input in my Contacts?

  You can create another account on your mac.

  You can open an account with mailchimp.

  There may be a limit on the number of emails you can send per day. No idea about the number, but I've heard as low as 200 per day.

  R

• How to create the hierarchy without creating a Subvi files

  Hello

  I have an existing LabView program that uses blocks of Subvi.  I want to change it so that I can't copy files Subvi (when I transfer the program to another computer).  The goal is to have a single file/program that I can copy, paste, and run on other computers.  So, I want to know if there is a way to create the hierarchy without creating a Subvi files or how to integrate the Subvi in the program.  My program and Subvi files are included here.

  Thank you

  Rocky

  You can create a version in an executable file.  It would be the most common way if you insist on having a single file.

  You could also build a source distribution in a zip file.  Then you just copy and paste the zip file and unzip it anywhere where you want.

• How do I create an ASR without floppy drive?

  is it possible to create an ASR without floppy drive, can I do the computer using a USB key instead?
  as you know all computers are more equipped with floppy drives.
  any help is appreciated.

  The answer to the original question is:

  You do not have.

  If you are using in relying on the built in NT backup to back up your system, it is the primitive technology (because he wants obviously - a floppy disk).  If you have a disaster (even minor), you'll have a big problem.

  If you want to make a backup, it is logical to use modern technology - and it is not integrated with XP.

  There are many popular options for XP Backup and imaging software (s) of third parties.

  A people a popular seem to love East of Acronis.

  With this (free 30 day trial) you save, make a bootable CD or USB bootable (which is modern, huh?) and use disaster.

  They used to have a completely free version - maybe no more - just the trial, then you must buy it, but it is highly respected.

  It is so much more robust than the XP Backup, it's laughable.

  Many other options if you do a little research on Google...

  Here are a few products that PML suggested could be appealing:

  Macrium Reflect
  Paragon backup and restore
  DriveImageXML

• Trying to create a playlist without Windows Media Player?

  Is it possible to create a playlist without Windows Media Player? I VideoLan if that's any help.

  Here's the question: I did the test.m3u file, which is placed inside the folder "Music" with the following content.

  #EXTM3U
  1\test.mp3
  

  If test.m3u exists in 'Music' and 'test.mp3' also available in 'music '. However, when I access the "Playlists" menu inside the Sansa player and then click on the 'TEST' playlist, it reads as "EMPTY". Why is this? Is it just that he can't find the MP3 file or have I done something wrong with where I placed everything?

  Any help is appreciated.

  I have successes by creating playlists m3u on my Sport Clip with music files organized in several subfolders using VLC Media Player.

  First of all, I use Win Explorer of files to create subfolders on my Sport Clip (internal or external memory) to the title of the music. Then I copy my mp3 files selected from my HD in different subfolders of music on my Sport Clip

  Then, I use VLC Media Player to load the mp3 files on my drive in the VLC playlist window.

  Can I use "Media-> Save Playlist to file-. > Save it as "abc123.m3u" and save the new playlist in one of the subfolders music on my player.   Then I can use music mode or map view on my Sport Clip to select the playlist and listen to music files through all subfolders.

  See this link for some useful screen capture

  http://stufinnis.co.UK/vlcplaylist.html

• How can I create a playlist without WMP?

  How can I create a playlist without WMP with files stored in my sansa Fuze please?

  You can make one in Notepad,

  It should contain the path to your music,

  So let's say your songs is at F:/music/artist/coolsong.mp3

  in Notepad, you must put the RELATIVE path, so if your file to playlist in the folder "music", you get artist\coolsong.mp3

  and if it is the root (main folder) of your drive, you would put music\artist\coolsong.mp3

  and all files must begin with: #EXTM3U

  Here is an example of a playlist (saved in the root

  #EXTM3U

  MUSIC\pillar\For the love of the Game\01 for the love of the Game.mp3

  MUSIC\pillar\For the love of the Game\02 turn up.mp3

  MUSIC\TobyMac\Momentum\Yours.MP3

  MUSIC\msc\Trogdor.MP3

  MUSIC\Msc\move.MP3

  I know it will work because it is my real playlist,

  during the recording of brand shure you end the name of the file as .m3u

  and change the type as 'save' to all files

• Creating an application without a head without a user interface

  I use the NDK for about 2 weeks now and I can't seem to find any resource on the following blackberry Web site.

  I am creating an application without a head that would run every 24 hours on my blackberry.  I have the app created with Momentics headless and it does what I need it to do. But right now I need to have a button in a user interface to call him.

  What I'm trying to do is,

  1. Have created enforcement wihtout the need of a user interface for packing it or deployment using our company BES.

  If you can point me to a tutorial or an example that would be great.  Of course if you have a response to these two that is too !

  Thank you

  Lothus.

  Watch the timer shutter release for app without head, code snippets and explanations can be found here:
  https://developer.BlackBerry.com/native/documentation/device_platform/headless_apps/triggers.html#TI...

  If you need a more complete example, I can create one, but I don't know when I'll have the time to do it, he could be close to mid-January. But honestly, all the necessary code is already in the docs.

  Don't forget to register action TIMER_FIRED in your bar - descriptor.xml under your app without a head part, I think it is also covered in the docs.

• Cannot create new model objects

  Hello

  We of the PLM 6.2 and already created using models GSM.

  Then, we need create new objects of existing gms models, but not found models to choose from to create.

  Can someone please hint us to correct this problem.

  Thank you.

  Make sure that your model has been workflowed to a status with the tag 'publishing model then "you will be able to search when you create the object.

  hope this helps

  Thank you

  Jessie

• Creating a background without end

  I'm looking for online tutorials to create a background without end, much like these images below. Can someone tell me please in the right direction?

  I would do it with a gradient fill layer

  1. Choose layer/new layer fill / gradient, give a name to your new layer and presso OK.

  2. in the window of gradient fill, choose the Style / thought

  3. drag & drop directly in the scene of the line of the gradient so that it overlapped the horizon line

  4. click on the preset gradient and the gradient editor-enter

  5 play with colors, but don't forget the stop no is opacque and the other is transparent.

  

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.