Creating a new column and update values

Similar Questions

• Add a new column and update of records

  I have the DW (OBAW) loaded at full load. Everything works fine.

  Now, I add a new column in a dimension in the DW (and in the ETL, RPD, CAD, etc.).

  I know that new (incremental) charges will take care of this column for the new/changed records... but

  Question is how can I update records, already loaded into PS for values in this column...?

  (a) I guess I can do this particular task of this dimension marked as 'full' DAC

  I'm not sure it's a good solution... I guess new ROW_WIDs will be generated and I have the connection with the fact table will be broken... Right?

  (b) I could blank the date of updating for this table W_ and/or refresher for this table S_ (from Siebel)

  I guess this could affect more than one task... or in other words all tasks dealing with this tables W_ and S_ - it also seems that the issue with the new ROW_WIDs will continue...

  Pls someone care to comment or offer a better solution?

  TXS. A lot.

  Antonio

  Assume that the table is W_ASSET_D or any other dimension...

  Yes, I plan to the OOB card personalization (in the folder custom, etc.).

  So if I'm correct... the option for setting null date discount for the W_ASSET_D table... and the use of DAC pointing to the custom task will take care of him...

  Just to be sure... It will not create new ROW_WIDs for W_ASSET_D?

  I'm worried by the _F FKs to this dimension tables...

  TXS for your help.

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile.

  All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?

  So it's not a logins.json file?

  I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.

  You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:

  • reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
  • Delete the logins.json file in the closed Firefox with Firefox profile folder

  When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
  You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Compare multiple columns and update a column based on the comparison

  Hi all

  I have to update the column STATUS of the slot structure of the table.

  Status should be 'P' if all the columns count are equal on the other should be "F".

  The value of the column can be "NA'. If the value is NA, then avoid this comparison column; compare only other 3 columns.

  My output should look like below.

  State of cnt1, cnt2 cnt3 ID cnt4

  1   4       4       4     4       P

  2   4       5       4     4       F

  3 4 4 NA 4 P

  NA 4 4 3 4

  I tried with the statemnt with BOX WHEN conditions and DECODE UPDATE, but could not succeed, can someone please help

  To do this, if you use my statement in response #11 box (Re: Re: comparison of multi-column and update a column based on the comparison of)

• iMovie 10.1.2 today (June 4, 2016), all of a sudden will not let me create a new project/film.  1. I have used the program extensively in recent weeks, many small travel films. 2. once in the projects, if create a new movie and the sign is checked, the op

  1. I have used the program extensively in recent weeks, many small travel films.

  2. when in the projects, if you click on create a new movie and sign, the new movie and trailer options opens successfully.

  3. click on film, nothing goes very well but open trailer.

  4. the issue seems to be the only new film/project.

  5. I can access all my other movies and run successful projects and theatre.

  6. I tried through a previous project and clicking new project from the menu, but still nothing.

  7 mac is 27 "OS X El Capitan, Version free 10.11.5, with 327 GB to 999 GB

  iMovie is 10.1.2

  8. the computer itself did not fall down and as FAS as I know, all other programs work correctly.

  9. I rebooted several times, but that has not solved the problem.

  10A does anyone else have this problem? If so, how do fix you it?

  Thanks much for any help!

  Have you ever tried to delete the iMovie preferences?  If the elements of the user interface do not, deleting preferences frequently you contribute.

  To delete the iMovie preferences leaving iMovie, runs, and then press and hold options and command key at the same time, at the launch of iMovie. Keep now pressed the buttons firmly until you see a command prompt to remove the preference. Confirm.

  

  Before you do, take note of all the settings that you made in iMovie preferences panel, so you can put back them later. iMovie will then begin with the Welcome screen.

  When I had a similar problem, the only thing that helped was to create an iMovie library.  Probably a corrupted in the iMovie project current library prevented the creation.   The problem persists, if you test different library in iMovie? You can create a library for testing.

  http://help.Apple.com/iMovie/Mac/10.1/#/mov3fa25bae7

• I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder."

  original title: renaming a folder

  Hello, I have a problem with windows vista, I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder" can you help me? to solve this problem?

  Hello, I have a problem with windows vista, I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder" can you help me? to solve this problem?

  Only time that happens, in my limited, knowledge is... If you use a 'illegal' name, such as ":" symbol. There are symbols, that you cannot use as part of a name. When this happens, you should get a warning indicating that the name is not allowed, something to that effect. Then he returns itself back to the new folder.
  Suggest you try again with conventional names. See if it works or not.

  t-4-2

• IWindows Mail buttons to create a new Contact and create a new Contact Group

  I lost my toolbar buttons to create a new Contact and to create a new Contact Group...

  I found EM.

  Missing the Windows Contacts toolbar buttons
  http://www.vista4beginners.com/missing-buttons-from-Windows-contacts-toolbar

  Vista - "New Contact" and "Contact Group on new" button missing
  http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html

  Bruce Hagen MS - MVP [Mail]

• When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression.

  * Original title: printer print only symbols

  Hello world

  When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression. If my old document is damaged to corrupt so how do I fix it

  Old documents are probably corrupt. Check out these links:

  How to troubleshoot print failures in Word: https://support.microsoft.com/en-us/kb/826845

  How to troubleshoot printing problems in Word: https://support.microsoft.com/en-us/kb/826862

  Troubleshooting damaged in Word documents: https://support.microsoft.com/en-us/kb/918429

  And this announcement in Office/Word groups is a better idea. This may very well be a FAQ here.

• Moving files: I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  Hello

  Go t the location where you want to create the new folder, right-click and select new/folder. Name the folder.

  Go to where the files, select the files and then use the right mouse button to drag the files into the new folder. When you drop the file, a pop-up menu, select the Move option.

  Let us know if you have any other questions.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How can I create a new folder and add some choose another folder

  How can I create a new folder and add some pictures a different folder?

  Click Start-> computer.  Navigate to where you want to create the new folder.  Then, hold down the ALT key and press F.  Point again-> file and click folder.  Now, you have created the folder if you need to name it.  Type the name you want to give the file and press ENTER.  Now you have the new folder with the name you gave it.  Use him copy / paste to copy the images to the new folder.

  Good luck.

• all my pictures have disappeared? I work on a lot that I had downloaded, and then I selected, then went to create a new collection and baptized DH slideshow 2015, then press return and now it is gone! Help, please!

  All my pictures have disappeared? I work on a lot that I had downloaded, and then I selected, then went to create a new collection and baptized DH slideshow 2015, then press return and now it is gone! Help, please!

  You have created a new CATALOG... !  not a collection!  (looking at your screen-clip)

  Re-open your correct catalogue-'Lightroom Catalog.lrcat 5' in the Menu > file > open recent element.

  Select the pictures again, click [+] on the header of the COLLECTIONS Panel.

  Before going further, learn from this video tutorial-

  Lightroom CC - create custom images - YouTube Collections

• Question: How to create the new user and schema in 11g?

  Who can give me the answer how to create a new user and a schedule?
  
  I had installed oracle 11g DB and oracle in my OS windows client. I found in the 11g than there is no console management business with the new version. It is no different with oracle 10g. So I don't know how to create this new user.
  
  I had created a new DB instance, but I did not how to create a user on it. Who can give me a helping hand for who? I hope a give oracle experenice expert answers.
  
  Thank you very much!
  
  Published by: user774630 on October 27, 2008 22:01
  
  Published by: user774630 on October 27, 2008 22:09

  Hello
  I'm not sure which option you are talking about? [Do you use the EMCA, http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If this isn't the case, the command line that the other is using DBCA (Database Configuration Wizard). I think you're talking about that. Yes, if the message comes from creating the repository that soon after, you can connect to the EM. You would get the port no port HTTP of EM comes from the $OH/install/portlist.ini file.
  HTH
  Aman...

  Published by: Aman... on October 28, 2008 11:36
  Waived, insertion of link does not work.

• Generate the DDL - change is a new column and I want to generate an alter table.

  All, morning
  
  I searched and searched all over the Data Modeler and I can't find this option... but I found it easily in the designer.
  I hope you can help me.
  
  V3.0.0.665 SQL Developer Data Modeler.
  
  I added a new column to a table, and when I generate the DDL I wish it were an alter table add column rather than a table to create.
  This feature is in the designer, so I think it would be in the Data Modeler.
  
  Just in case my description isn't clear, here are the high level steps, then it is clear.
  
  1 create logic model
  2. create the relational logic.
  3. create the physical relationship.
  4 generate the DDL and run in the database. At this point, I'm going to production with my system, and all right.
  5. at this point, we have an enhancement request. For the model, it will be a new column in a table.
  6. update of the logic model.
  7. relational update logic
  8 physical update of relational
  9 generate the DDL. Here, I would have generate it know that it needs to generate an alter table add column and does not create the table.
  This is something I do a lot as all my models are in production. I can't find how to do this step to get data Modeler to generate the altar.
  Designer done exceptionally well.
  
  Quite often, it is more than a single column. Changes can be many and made over time and at the time of generating the DDL you remember not every single amendment. To have the tool discover these changes for you and generate the appropriate DDL is a feature that I consider as very high.
  
  I hope that is clear and you can help me.
  
  See you soon
  Chris...

  Hi Chris,

  you need to compare your model on database - database relational model even import and use the option 'swap target' - in this case 'expressions of alter' against the database will be generated.
  You can watch demonstrations here http://www.oracle.com/technetwork/developer-tools/datamodeler/demonstrations-224554.html
  It would probably be more useful http://download.oracle.com/otn_hosted_doc/sqldev/importddl/importddl.html
  Sooner or later your changes will require the table to be recreated, and you will need to backup your data - you can consider using the 'Advanced DDL' option - script is generated that will land your table content (including LOBs) to the system of files accessible from the database and restore after changes. Well not try directly on the production system :).

  Philippe