Creating a report for virtual machines that do not have a tag

Similar Questions

• Does anyone know how to get updates of Photoshop CC 2015 for a machine that does not have Internet access?

  Hello.  As the title says I have several machines that do not have an Internet connection that I need to update Photoshop CC 2015.  From what I've read so far, the only way to update is through the app.  Is there another way to download updates on a different machine and then run them on computers running the PS?

  : http://prodesigntools.com/adobe-cc-2015-updates-links-windows.html

• Wireless devices shows the MAC address for 1 device that does not have an IP address

  I am tracking down each device connected to my router nighthawk and I identified everyone except this. There is a device of Wirelsss appears when I connect to the router that does NOT have an IP address but it has a MAC address. An interesting point is that the router device itself has a number of MAC that is not anywhere in the list of devices. Any ideas what this could be? I have an Extneder range wireless attached Nighthawk also but I already idenfified his IP address and Mac address.

  How a device could have a mac address, but not IP address?

  Why the address of the router device do not show in the list of anywhere?

  Try to turn off the Extender and see if that will fill again.

• VCenter shows a network for a virtual machine that is not associated with any host

  I have a win2k3 VM who at one point had a network assigned to him called "MONITORING".  This network is configured is no longer in the ESXi (5.5) environment.  The virtual machine is connected to a network called "PRD-SURVEILLANCE" which is correct.  It's not really cause a problem, but I can't find a way to get rid of the object of MONITORING network.

  In VCenter MONITORING networks has a VM of 1 meter, the number of hosts of 0.  I also see it in the VM - dialog box, change the settings, but there is no option to remove it.  Profile Image to the virtual machine is version 10 so I can't use the old Client of VI to try to remove it.  I have checked each host and do not see this listed network object.

  I tried to restart the VM, it migration between hosts, changing its network of SURVEILLANCE of PRD to another network and vice versa and close - remove NIC and add a new card network.  MONITORING legacy network still appears in the config.

  For the virtual machine's .vmx file shows that the correct network: ethernet0.networkName = 'RDP-ANALYSIS '.

  Any suggestions on how I can remove the artifact of MONITORING network?

  The virtual machine has a preview that was created at the time where the MONITORING network was still affected?

  André

• The features of virtual machine that are not supported or disabled material...

  I get this error when I try to migrate virtual machines from one host to another.

  but some other virtual machines to migrate.

  What's wrong? I have
  

  and if the reason EVC mode I think that I can not migrating other virtual machines, am I right?

  

  Jokerciitaw thanks for the reply, but I can't understand if you're right... How can I migrate some other virtual machines?

• Try to mount a drive on my virtual machine that is not part of the data of the VM store... Please help!

  Hi all

  I have ESXi 4.0 installed on my server, and one of my four VM is an instance of Debian Lenny. My VM residence on a Raid-1 data store according to the 2x1.5TB. I have an additional SATA drive connected to my server (it is in one of the 8 hotswap bays in the server) I want to get on this VM Debian.

  Where can I do if the virtual machine can detect and eventually to mount this drive? I did research on vSphere manual with no luck yet.

  Thank you in advance for your help!

  ESXi has several limitations (due to the limited service console).

  So you don't have USB support in the hidden console, you cannot read NTFS and Linux file system (no module in the kernel) and so on...

  As ESX and ESXi cannot (yet) to virtualize a USB device, so you cannot mount your drive in a VM.

  I would suggest using another system (Linux or Windows with a browser to ext2/ext3).

  André

• Create a great metric for virtual machines that shows how many virtual machines on the host parent

  One of the properties of a virtual computer's Parent host.  I would like to pass this info on to a metric Super VM and use to gather the number of VMS are on the associated VM host Parent.   This SM would be so associated with my VMs.

  Is this possible?

  -MattG

  I found this:

  AVG (${adaptertype = VMWARE, objecttype = HostSystem, attribute is summary | total_number_vms, depth =-1})

  Because I had to use a host object type I don't think he would show as a metric of Super in the scope of the VM... it does!

  -MattG

• What is the Maximum number of virtual machines that you can have in a HA cluster in VC 2.5 Update 2?

  as in the subject...

  AFAIK VMs per host maximum is 40 in the case of cluster HA with 9 or more guests. Yes 40 * 32 is 1280 VMs for cluster HA 32 hosts.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Models of virtual machines that are not visible after reinstalling Virtual Center

  Hello

  I can see patterns in data warehouses, but not covered by the option "display" under models and virtual computers?

  This happens sometimes.  You can browse the data store (s) in question, right click on the file .vmtx and add to the inventory?

• Create the list of virtual machines to exclude the script through .csv file?

  Hello

  I have a script that runs all day off hours to check my VMs respect some things, like having the option to 'VM tools upgrade policy' checked. The script will export a list of virtual machines that DO NOT have this option enabled and then later to fix the problem. Now, for some specific VMS, I don't want to have the option active and want to exclude them from this review. I try to add a list of these virtual machines I want to exclude from my check script of VMTools_UpgradePolicy via a .csv file containing their names. Here's what I have:

  ##############################################
  #VMTools update during the feeding cycle - report
  ##############################################
  function Report_VMTools_UpgradePolicy {}
  $list = import-Csv "C:\VMware\PowerCLI\Scripts\EXCLUDE LIST\EXCLUDE_vmtools_upgradepolicy.csv".
  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name}
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  The content of the EXCLUDE_vmtools_upgradepolicy.csv is as follows:

  'Name '.
  "VM1.
  "VM2.

  "VM3.

  I try to get all the virtual machines in my environment who have the ToolsUpgradePolicy - eq 'manual' (unchecked), AND which do not match any of the names on my list of exclusions (VM1, VM2, VM3). My script so far will do what I want, except that only the last entry in my list of exclusions will take into account. VM1 and VM2 will still be reported as VMs that need to be addressed.

  I'm not sure that I am taking the right approach with this, I will continue to seek a solution for what I want, but any help would be appreciated! I prefer to make my list of exclusion to a separate file, for example "EXCLUDE_vmtools_upgradepolicy.csv", because I want that other administrators to be able to just open this .csv file and add virtual machines to this list without having to touch my scripts.

  Thank you!

  Vince

  Hi Vince,.

  It is like that I think because of your statement:

  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name} -> it
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  $exclude is a variable that contains only 1 entry., that's why you see only the last element inside. It will not be an array.

  foreach ($entry in $list) {[string []]+ $exclude = Get-VM-name $entry.} Name}

  This will fill $exclude table with entries of string that will contain the names of virtual machine.

  And when you will be comparing. I think you should use

  where {$exclude - notcontains $_.} Name - and... the rest

  Kind regards

  Greg

• Can I use the same product key in a virtual machine that I use for the Windows installation that hosts the VM?

  I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?

  Thank you!

  No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• Folder path as a VM property - for virtual machines in a paralytic

  Hello

  I used the new-viproperty of LucD script to create a folder for each virtual computer property in my inventory. It works perfectly well for virtual machines, but not for virtual machines in a paralytic as these do not have a 'record' in powercli property. they report a $null value.

  Would be much appreciated if someone can help me to modify this script so it creates a VM property for the VMS and VMs in a paralytic?

  http://www.lucd.info/2012/05/18/folder-by-path/

  01 02 03 04 05 06 07 08 09 10

  11

  12

  13

  14

  15

  16

  17

  18

  19

  20

  21

  22

  23

  24

  25

  26

  27

  28

  New-VIProperty-Name'BlueFolderPath' -ObjectType 'VirtualMachine'-Value{

      param($vm)

      functionGet-ParentName{

          param($object)

          if($object.Folder){

              $blue= Get-ParentName$object.Folder

              $name= $object.Folder.Name

          }

          elseif($object.Parent -and$object.Parent.GetType().Name -like"Folder*"){

              $blue= Get-ParentName$object.Parent

              $name= $object.Parent.Name

          }

          elseif($object.ParentFolder){

              $blue= Get-ParentName$object.ParentFolder

              $name= $object.ParentFolder.Name

          }

          if("vm","Datacenters"-notcontains$name){

              $blue+ "/"+ $name

          }

          else{

              $blue

          }

      }

      (Get-ParentName$vm).Remove(0,1)

  }-Force| Out-Null

  Check if the new version works for you.

  New-VIProperty-name 'BlueFolderPath' - 'VirtualMachine' - value {ObjectType

  Param ($VM)

  Function Get-ParentName}

  Param ($Object)

  if($Object.) {Folder)

  $blue = get-ParentName $object. Folder

  $name = $object. Folder.Name

  }

  ElseIf($Object.) VApp) {}

  $blue = get-ParentName $object. VApp.ExtensionData.ParentFolder

  $name = $object. VApp.Name

  }

  ElseIf ($object - is [VMware.Vim.ManagedObjectReference]) {}

  $folder = get-VIObjectByVIView - MORef $object

  $blue = get-ParentName $folder. Parent

  $name = $folder. Name

  }

  ElseIf($Object.) Parent - and $object. Parent.GetType (). Name - as a ' file * ') {}

  $blue = get-ParentName $object. Parent

  $name = $object. Parent.Name

  }

  ElseIf($Object.) ParentFolder) {}

  $blue = get-ParentName $object. ParentFolder

  $name = $object. ParentFolder.Name

  }

  If ("vm", "Data centers" - notcontains $name) {}

  $blue + "/" + $name

  }

  else {}

  $blue

  }

  }

  (Get-ParentName $vm). Remove (0.1)

  } - Force | Out-Null

• Cloning a virtual machine that contains a system of operating under existing Windows license

  I have a Dell VRTX with three blades and five VM.  All five VM have Windows Server 2012 R2 64-bit as the operating system.

  In the near future, I will create at least two new virtual machines that are also having Windows Server 2012 R2 64-bit as the operating system.  To make things easy for me, I would like to just clone among the five existing VM to make the new virtual machine.  This should be easier to make a virtual machine from scratch.

  However, I'm concerned by the existing Windows license manager.  Ideally, I would like to clone an existing virtual machine, remove (format?) the Windows Server 2012 R2 64 bit installation of VM newly created and then perform a new installation of Windows Server 2012 R2 64-bit, install VMware Tools, etc. in the new virtual machine.

  1. what happens in the short time that in double Windows licenses are active?  I fear that the window one or two facilities will become disabled, as well.

  2. is there a better/more way to reach my goal of creating the new virtual machine?

  3. are there additional tips, comments or questions?

  Thanks in advance.

  
  

  Members of your VM of a domain? If you blow the OS disk, then just make sure that the first time it starts (if you need to start), you disable the network adapters for. Personally, I would create from scratch, especially if they are members of the domain.