Try to mount a drive on my virtual machine that is not part of the data of the VM store... Please help!

Similar Questions

• The features of virtual machine that are not supported or disabled material...

  I get this error when I try to migrate virtual machines from one host to another.

  but some other virtual machines to migrate.

  What's wrong? I have
  

  and if the reason EVC mode I think that I can not migrating other virtual machines, am I right?

  

  Jokerciitaw thanks for the reply, but I can't understand if you're right... How can I migrate some other virtual machines?

• VCenter shows a network for a virtual machine that is not associated with any host

  I have a win2k3 VM who at one point had a network assigned to him called "MONITORING".  This network is configured is no longer in the ESXi (5.5) environment.  The virtual machine is connected to a network called "PRD-SURVEILLANCE" which is correct.  It's not really cause a problem, but I can't find a way to get rid of the object of MONITORING network.

  In VCenter MONITORING networks has a VM of 1 meter, the number of hosts of 0.  I also see it in the VM - dialog box, change the settings, but there is no option to remove it.  Profile Image to the virtual machine is version 10 so I can't use the old Client of VI to try to remove it.  I have checked each host and do not see this listed network object.

  I tried to restart the VM, it migration between hosts, changing its network of SURVEILLANCE of PRD to another network and vice versa and close - remove NIC and add a new card network.  MONITORING legacy network still appears in the config.

  For the virtual machine's .vmx file shows that the correct network: ethernet0.networkName = 'RDP-ANALYSIS '.

  Any suggestions on how I can remove the artifact of MONITORING network?

  The virtual machine has a preview that was created at the time where the MONITORING network was still affected?

  André

• Hello! I try to install After Effects and PS extended, but I can not... I have a Mac. Please help me

  Hello! It is what appears after trying to install After Effects on my Mac

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF015, DW063... WARNING: DS012...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 5 warning (s)

  -Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (11)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (12)

  -Payload: {02EFB598-92AB-4DCB-A417-FE0FCBCD2266} AdobeColorVideoProfilesAE CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (10)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (11)

  -Payload: {4758849A-8C03-4F90-A024-3D4C7A035B5A} AdobeMotionPicture CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (26)

  -Payload: {4817D846-700B-474E-A31B-80892B3E92E3} Adobe After Effects CS6 11.0.0.0.

  ERROR: DF015: cannot delete the symlink "/ Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 1405).

  ERROR: DW063: ARKDeleteSymlinkCommand of command failed. SEQ (1405)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe After Effects CS6: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe after effects CS6_AdobeAfterEffects11es_ESLanguagePack: installation failed

  And cela PS extended:

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF015, DW063... WARNING: DS012, DW016...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 10 warning (s)

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  -Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (21)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (22)

  -Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (11)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (12)

  -Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (3)

  -Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (5)

  -Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0.

  ERROR: DF015: cannot delete the symlink "/ Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/amtlib.framework/Resources"Seq (524).

  ERROR: DW063: ARKDeleteSymlinkCommand of command failed. (524 Seq)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Photoshop CS6 Core: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe Photoshop CS6 Spanish language Pack_AdobePhotoshop13-es_ES: installation failed

  -------------------------------------------------------------------------------------

  Please, I beg you! Help me I need it quickly

  Hello

  Please see errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5.5 CC, CS6, and error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Models of virtual machines that are not visible after reinstalling Virtual Center

  Hello

  I can see patterns in data warehouses, but not covered by the option "display" under models and virtual computers?

  This happens sometimes.  You can browse the data store (s) in question, right click on the file .vmtx and add to the inventory?

• Play a suspended virtual machine, vmdk file not found or the specified file is not a virtual disk

  Hi, I have a problem that I can't solve with the usual methods.

  My data

  • software: VMVware Workstation 6.5.1 build 126130

  • Host: NB HP Compaq 2510p with 2 GB of ram

  • OS: Windows XP Pro SP3 5.12.2600

  I have a Win XP Pro SP3 computer virtual created for my work:

  • 6-5 - 7.0 VM workstation

  • RAM: 512 MB

  • Windows XP Pro operating system

  • Processors: 1

  • CDRom: Autodetect

  • Floppy: Autodetect

  • USB: present

  • Sound card: Autodetect

  • Display: Autodetect

  • HARD drive is divided into 2 GB files

  The problem lies in the HARD disk:

  • 40 GB declared

  • 0 MB recognized by the system

  My VM was functional complete. After a suspension

  • The State remains suspended

  • When I try to resume, a pop-up window will appear "file not found: IATROS VM.vmdk" go through it...

  the vmdk file exists (see my attached files).

  When I try to see the features on the parameters, appears "the specified file is not a virtual disk" and all data in the pop-up are unknown or missing.

  I tryied to use the vmware_vdiskmanager with the command vmware - vdiskmanager.exe - R 'e:\appo1\IATROS VM.vmdk' in vain also.

  I think that it is necessary to recreate a file descriptor for disc divided into 2 GB files.

  http://KB.VMware.com/selfservice/microsotes/search.do?language=en_US & cmd = displayKC & externalId = 1026266

  but, if we compare the contents of the VMDK file with the discussion in the article, there seems to be no problem of format or content.

  There are suggestions to solve the problem?

  can I await your response?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Creating a report for virtual machines that do not have a tag

  I create tags from customer for all of my guests.  With attributes, I might just show the empty field under the VI Client.  Here, I'm a little lost.  Can I filter by vms with TAGs that export and delete those from the list full of guests, but it is not very useful.

  I tried

  $VMName = Get-VM NOM

  Si ()$VMName. ExtensionData . Tag -ne $null) {Write-Host "yes"}

  This works for a person who has a tag.  When I change - for - eq it does not report back what I thought was a null value.

  (Note that this works really not at all.  He referred to all the guests, the tag or not).

  Anyone can shed some light on this?

  Thank you.  Matt

  $vmlist = get - vm

  $vmlist | où {(Get-TagAssignment $_) .length - eq 0} | Sort-Object -Property name | name of ft

  This works!  The length of the array using empty rather than $null.

• Offline host, virtual machine running, can not connect from the console

  I have a box of ESX 3.5 U3 that runs on an IBM x 3850 I've lost any connection to.  The host and guests all show in VC as disconnected, but all guests are still running.  I feel that it is running out of disk because there is an error message on the Alt - F11 screen that says cpu0:1024) VMNIX: & lt; 0 & gt; SCSI: device can be offline - recovery on failed command error: host 1 channel 0 id 0 lun 0.  No lights error on the server or players.  If I ssh, I get ssh_exchange_identification: Connection closed by remote host.  If I go to one of the other Alt + F, I can type a logon, but he never returns with a password.  The server responds pings and has backup management networks, but those who don't offer no connectivity either.

  All guests are on SAN LUN with 1 exception.  I tried to turn off one of the servers and the re-registration that it on another host, but it won't because there always is in a disconnected state.  I tried to remove the aggressor, but he sat in class for almost an hour now.  I would prefer not to have to drop this box there are some productions s VM on it.

  Sounds like you'll have no choice, but to power cycle the host. I recommend you contact vmware support befor taking this action. You can also prepare a scenario of recovery before taking any action.

  I am familiar with your SAN provider, but are there indications of errors on the SAN?

• Can I use the same product key in a virtual machine that I use for the Windows installation that hosts the VM?

  I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?

  Thank you!

  No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• Storage DRS, move a virtual machine that is in the data store is not a member of DTS

  Dear all,

  If I've set up storage DRS that contains, for example, DS1 and DS2. I have another virtual machine that resides on DS that is not part of the cluster of DTS. Can I move this virtual machine to one of the (DS1, DS2) data store? OR will some disruptions?

  Thank you

  Jocelyn,

  Which is correct in both cases. You can leave DTS place it for you (which is my suggestion), but I thought you wanted it to go to a specific data store.  That being said you can reactivate the DTS for a virtual machine under the SDR change settings if you do not ever clear for a virtual machine

• VMware Fusion 6 Professional - where is the possibility of locking VMware using a single virtual machine and do not allow the creation of new virtual machines?

  This is a quote from the VMware Fusion Professional 6 product page:

  VMware Fusion 6 Professional comes with IT administration tools to help you deploy VMware Fusion using Apple or a management solution third Mac as of JAMF's Casper Suite. Further reduce the cost of support of Windows desktop using the mode of single virtual machine that limits user access to the library of the Virtual Machine, the ability to create virtual machines or migrate PCs and reduces the options of the menu.

  Where can I find these IT administration tools?  I want to block my VMware users to a single virtual machine so that they can not blow by creating new virtual machines, etc.

  How can I do this?

  Thank you!

  Glitch004,

  You could follow the steps to activate the single mode of VM:

  1. turn power off all running VMS and out the merger.

  2. Add the following line to/Library/Preferences/VMware Fusion / config

  installerDefaults.simplifiedUI = 'TRUE '.

  3 restart merger and you will find:

  . VM library is hide in the VM menu.

  . only one virtual machine can be used, while click second VM Fusion of the reports ' Unable to open document. "

  Best regards

  Shanghai

• VMware 6.5.5 cannot import the virtual machine that uses 2GB "disks of split.

  Hello

  I'm using VMware Workstation 6.5.5 under Win XP. I tried to import a virtual machine that was created by using the option 'Split' virtual disks into files of 2 GB. The import fails and presents a pop-up: ' Conversion Assistant/cannot determine the guest operating system. The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, there are more files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  Thank you.

  -Phil Anzel

  FYI... VMware Workstation peut import a Virtual Machine that uses twoGbMaxExtentSparse discs.

  The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, rather there are files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  The problem is that you're missing the "disk DescriptorFile", "cofortcol3v01 - cl1.vmdk" and which is why it's a failure and not a limitation of the Conversion utility.

  Also if you actually had a Virtual Machine created in VMware Workstation 5.1 you can simply run directly under VMware Workstation 6.5.5 without having to run the import command.

  Anyway, if you have a backup that you can recover the file "cofortcol3v01 - cl1.vmdk" then you should be fine and if you have not then a new can be created.  If you can archive (compress) files vmware*.log (usually 4 of them) in a single zip file archive and tied him to a post in response, then one of us will create a new file "cofortcol3v01 - cl1.vmdk", based on the information contained in files vmware.log for you, if you don't know how to do it yourself.

• Convert a hard drive to a virtual machine

  I have a server that the material died which has mirrored hard SATA hard drives in them.  I would like to convert the data on that hard drive to a virtual machine and put it in my vCenter, but I am unable to start the server.  What is the best way to do it?  I can mount and read data from Windows on another machine.  Right now I'm trying to back up data until an acronis image and then use converter to import.  I think it is easier to sense, though.   I also have a backup server Symantec Backup Exec, but I do not have the agent ESX for Symantec.

  Thank you

  Dave

  If you want to try the converter, just fix the disk on a physical host somewhere and run a normal conversion.

  Once you have done this, create a new empty virtual machine with no disc and you fix vmdk for the reader you want migrated to this new virtual machine. Chances are that you will get the normal NT Loader boot error when you try to start, but you should be able to solve this problem using a fo the following:

  DiskPart

  Fdisk

  Recovery Boot

  You can also consider to use something else than VMware converter - perhaps something like Acronis True image?

  Good luck and please feed back.

• Cannot expand the hard drive of a virtual computer that is a linked clone.

  I have a virtual machine that is a linked another clone.

  I did a lot of development and changes to the linked clone, and now ran out of disk space.

  Now I want to extend the drive, but I get this error:

  "Disks of virtual machines that are linked clones cannot be extended.

  So I then try to extend the drive of the virtual machine that he was cloned from:

  "Disks of VMS with snapshots cannot be extended. You must delete the snapshots or use VMWare vcenter converter. »

  What can I do? If I remove the snapshots of the original machine, do not lose the 'link' to the linked clone? What he suggested that I use the "VMWare vcenter converter" for?

  Does anyone have a solution?

  Kind regards

  James

  Create a complete clone of the virtual machine in the current state. Which can be extended.

• Need help with replacing a drive on a virtual machine

  Test case for something I need to do on a separate production machine.  Virtual MACHINE is running WinSvr2003.  Only the hard disk assigned to the virtual machine is one of 20 GB disk, C: using this.  Need to C: to be larger.  Add a 40 GB drive to the configuration of the VM in the CR.  Started an iso BartPE with plug-in in Ghost.  Ghost can copy the C: 20 GB drive on the 40 GB drive.  Went in the VM config and changed is the 40 GB SCSI 0.1 drive and the drive of 20 GB at SCSI0, 2.  After I saved, VMware changed the 40 GB on disk 1 and the 20 GB on disk 2.  Went it into the BIOS on the machine config to boot the disk of 40 GB.  But no matter how I put it in the BIOS, it would only start on the 20 GB drive.  Went in the VM config and removed the 20 GB drive (which is not an option on the production machine, it has a volume of data on the same drive).  It boots to Windows, so I guess it's start on the 40 GB drive.  But I am unable to connect to it.  It shows that the application of settings, record the settings, then back to the login screen, all within 2 seconds approximately.

  Is there anything else I need to do to (1) move the volume from the Windows system to a new disk w without side effects in Windows and (2) so that it can start on the new disk correctly?

  If it is a single virtual drive with 2 partitions and the C:\ is on the front of the drive, Extpart won't help. It is usually best to separate the partitions to multiple virtual disks. I use the converter to V2V the VM and move on their own virtual disk partitions, then develop them if necessary.