Creating an MSI package for distribution through a network
How can I create an msi package adobe reader version 9.2 without the help of Adobe Customization Wizard to deploy the package over the network to a massive installation?
I tried to generate with the adobe Customization Wizard, but the msi should I modify it is void because it obtained by installing free software (to install is created in program files) and does not.
I get an MSI for the edition in the Customization Wizard?
I extracted a reader 9.2 executable?. If so, the free version is available in the site does not give me the possibility to extract to get the msi file.
Thank you very much.
Why is it you oppose the use of the generator package? You can use winzip to extract the msi on the exe file. The wizard creates just the file for you allows you to deploy through SCCM or depending on the tool you are using.
Tags: Acrobat
Similar Questions
-
How to create packages for distribution?
Hello
I'm trying to distribute updates, what would be the best way (our organisation does not allow downloads of large files)
Hi panties,
I think you want to create the package for applications cloud creatives.
Please check the help below document:
Kind regards
Sheena
-
My widows Installer keeps trying to install updates of my 'sonic recordnow copy', but he always tells me to find the package with the "copy.msi" file
I also get the same error, but with my "HP digital media archive" except that this time he needs the installation with the file «ezarc.msi» package
I CAN'T FIND THEM!
Hi proudvet,
Please see the following link for more information of the site Web of Roxio on your question:
http://www.Roxio.com/enu/support/RecordNow/software_updates.html
Also see this link for more information of the HP website for the other missing .msi file:
http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00811375
Any problem that you have, you will have to contact Roxio/HP for assistance because these .msi files are part of their software.
Thanks and good luck!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How can I obtain Volume license key to create an installation package for Acrobat DC on SCCM?
We deployed a bit manually, but with a lot of upgrade, it is easier to create a package to push rather than manually installing on more than 300 PCs.
Hello
I recommend to go through the following link and choose what suits you.
Adobe, reductions license management | Purchase Adobe programs
Concerning
Sukrit diallo
-
Acrobat 9 Pro, create an interactive pdf for distribution of electronic mail by someone else
I have created an interactive pdf with all fields in the correct form and present the button above. The action that I chose for the submit button was "attached to an e-mail address", but I can't understand how to enter a different from mine. It automatically attaches to my email address. Help! I need to send the form approval and distribution of this person. Thank you!
Hello
Once you have created the button, you set the action as "submit a form". When you add to that, you will be asked to enter the URL. You must type mailto: follow-up to the e-mail address you want the end user to send it to. For example, if your client/colleague wants the form to be sent to them and their email address is [email protected] then you would enter
mailto:[email protected]
in the URL box. You want to make sure to only select the PDF option, which attaches the whole form to the e-mail address.
hope that helps
Sebastian
-
I made a mobile banner ad and an ad for a local newspaper (their site desktop and mobile). I'm not sure of the best way to send the banner ad to the newspaper. Should I send an OAM packet? Any help with this matter would be greatly appreciated thanks!
In general, you should publish to the Web and send them the content in the newly created folder (publish\web) in the folder saved composition.
Avoid giving their oam unless they ask, as oam files are specific for inclusion in Web pages, usually created by other products Adobe like Adobe Dreamweaver, Adobe Muse etc.
HTH,
Vivekuma
-
How can I create an APK file for distribution on android?
Hi, I learned about how to publish my folio as an android application for the market. I have read that I need to create an APK file. I do in the DPS Viewer generator or do I do this using other software such as the developers Google game site?
Thank you
Hey Ross,
the certificate used for the APK files is a self-signed if at this point, no need to use Google Console yet.
See http://helpx.adobe.com/digital-publishing-suite/kb/publishing-process-android-amazon-mobil.html (create a certificate using the Keytool)
Test is only a question to install the APK file on the device where you should be able to test.
The Android developer account will be useful for testing if you have in-app purchases correspondent folios 'detail '.
-
where can I download Acrobat reader MSI dc for my school's network upgrade
Hi I am trying to update Acrobat Reader XI DC on our network of schools. Is anywhere I can download a MSI file that I can use our GP to upgrade or an other easy way to move to DC.
Thank you
Bara
Hi barasiva,
Please download it here: ftp://ftp.adobe.com/pub/adobe/reader/win/AcrobatDC/1500720033/AcroRdrDC1500720033_es_ES.ms I
Thank you
Abhishek
-
Error when installing an msi package.
Hello.
I wonder if anyone has a solution for my problem.
I created an msi package and the app works if I start it.
But when I try to install it I get.
Cannot create target: the file exists.
The computer I'm installing is a new computer.
Grateful for any help or guidance.
Thank you
Try to rebuild with this Package.ini and let us know if this helped.
Good day
-
ThinApp 4.6 cannot generate the msi package
ThinApp 4.6 question, I can't undestand why, but I am unable to create the .msi package. The error comes at the end of the phase of construction for any application! no problem with 4.5, but you now I need the functionality of Streaming... so I'm stuck.
creating the file .exe like no problem, but the creation of the .msi fails with the error "cannot find destination path /bin/whatever.msi" (and the .msi file created is obviously unusable)
Any suggestions?
@kkware - excuses... did not read your message first. This looks like an AV problem almost. That would be my first guess.
If you have any software firewall or AV, can you delete those virtual machine (take a snapshot of the VM) or turn them off temporarily?
-
VM snapshots allows you to created a ThinApp Package?
I have a request I want to create a ThinApp Package for. My application requires also some prerequisite applications to install that I also want to include in the package ThinApp.
Currently my process to build the ThinApp package is as follows:
1 revert/Go To installed a virtual machine 'clean' with VMware ThinApp
2. perform a scan with ThinApp
3. install applications prerequisite of my application
4 install my application
5 perform a postscan with ThinApp
6 building the package ThinApp including my application and its required applications
I have a preview of my 'clean' VM that was created using VMware Workstation so that I can return to my 'clean' machine whenever I want to build a new package ThinApp, however I'd like to be able to use a snapshot of my VM that includes only the application prerequisite so that I don't have to reinstall them whenever I create a new package ThinApp for my application.
My ideal process would be as follows:
1 revert/Go To installed a virtual machine 'clean' with VMware ThinApp
2. perform a scan with ThinApp
3 snapshot go to a VM to a virtual computer with the prerequisite applications installed
4 install my application
5 perform a postscan with ThinApp
6 building the package ThinApp including my application and its required applications
Essentially for step 3 above, I want to be able to go to a snapshot of my VM has already some prequiste applications instead of having to install physically each time.
Anyway is to maintain the process of configuration ThinApp Capture while jumping to different snapshots of a virtual computer?
Any advice or suggestions on how to do this would be greatly appreciated.
Thank you.
I would do the following:
- Go to a clean snapshot
- Thinapp to start and perform a prescan
- Install your applications pre - req
- Snapshot at this moment (in memory) and name your application
With this, you can go back to the snapshot in step 4 and install your application each time, then do a postscan, etc..
-
Flash Player 16 PPAI available as an MSI and EXE for distribution?
Hello
Have we not Flash Player 16 PPAI plugin available as an MSI and EXE for distribution?
Where we find out who?
Thank you
Prakash
Hi Prakash,
Sorry for the delay and confusion about the application process. It was my fault because I thought that your application through our normal channel marked at least a manual response from the team working on the licenses.
As it is, we are currently working through legal and logistical issues for the distribution of PPAPI. We hope to have a mechanism in place in the coming months. I also note that we have no plans at this time to create a version MSI or PKG installer from ppapi. Of course, we will re-evaluate if there is demand.
I would like to understand your slightly better use case. Would you like could you drop me an email to [email protected] and explaining how you will use the generation of ppapi and how many clients you expect to distribute to the?
Thank you
Chris
-
I am trying to create a package for 8 Captivate that includes NeoSpeech voices
I'm packing 8 Captivate using CC package. I need to add the NeoSpeech voices to the package. I run package manager to build the package with the msi using our license of the company that gives me applications and patches. There is nothing for NeoSpeech well and I include NeoSpeech with the msi.
Hello
In order to create a Neo Speech voices to Captivate 8 msi package, you must use Adobe Application Manager Enterprise Edition 3.1 (AAMEE 3.1).
You can download AAMEE 3.1 by visiting the link:- http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html
Kind regards
Ajit -
Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.
The google toolbar is active it is not displayed any longer.
Hello
"a valid copy of the installation package for TrayApp.msi.
This is normally a problem with your HP printing software
Uninstall and reinstall the printer
and try this
http://www.ehow.com/how_5269744_remove-trayappmsi.html
Contact HP support
http://welcome.HP.com/country/us/en/contact_us.html
HP support forums
follow these steps
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
also run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.
Hi JFO58,
I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs
Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions
Kind regards
Rahul
Maybe you are looking for
-
My "Complete Mail" Inbox is shown as being full, so it is not.
My full email inbox is empty, but the following message default appears when I type "make messages-: "The record is complete and can not hold messages either. To make room for more messages, delete any old or unwanted mail and compact the folder. » E
-
Xperia compact Z5 - app, welcome and Notification bar buttons awol.
Title pretty much everything said.The phone ran out of power a few hours earlier, put it on the change and when she came back (there is nothing unusual about any of this), for some reason, a number of parameters has changed a bit and I'm now no longe
-
SmartBand does not connect since the android update
Has anyone else had problems connecting to their SmartBand since the update to android 5.0.2? My group is fully charged and I uninstalled then reinstalled smart connect, but I don't always have it connect. Help!
-
Install the output for officejet pro L7680 tray
How to install a new bin for output on this unit? My only current broke.
-
How to run SQLite on Blackberry JDE 5.0... ? Simulator of
Hai, How to run SQLite on Blackberry JDE 5.0... ? Is it really need all jde settings? for sqlite running applications? I use the source- class InnerClassScreen extends form {} sqliteDB public database;public InnerClassScreen() {} Lab