Similar Questions

• Navigation in both sense between the anchor points with "prev" and "next buttons?"

  Hi all

  I'm working on a horizontal presentation site that has anchors on each part. That the user scroll, he snaps to each anchor point. It works fine with just the mouse wheel, but I wish I had previous buttons and following which allow easy navigation between points. I know I can have buttons to jump to say on each article has > B > C and then C > B >, but it's a simple "prev" and "next" buttons that are pinned to the page as a whole. Then, as the page scrolls from left to right, the buttons remain in place. Is it possible to have them just go to previous and next in the line, rather than linking a button to anchor point A, B, C, etc.?

  NEW WIDGET! Navigation in both sense between the anchor points with "prev" and "next" buttons http://goo.GL/TMbZRc

• Vector glitch of anchor points with the transformation of the cs6 illustrator objects

  Vector anchor points glitch during the transformation of objects,

  It is if I create a square and turn it, let's say I have it increase by 200%, it creates additional anchor points in the square corners and also creates weird crenellated edges, when I hover over the square with the slider to show the edges, the line from the edge which shows blue is shifted in at the edge of the actual object reference (see attached img the orange object displays the quirky plan and the black object is supposed to be a) round square edged, but after that I turned (Shear 10 degrees) it apeared of curves in stairs)

  I already tried to launch updates and restart, but the issue continues to display.

  Thanks in advance for your help.

  Rob.

  

  Looks like it's related to 'snap to grid of pixels.

• direct selection - move the anchor points with the arrow keys of the keyboard

  Hello

  I use Illustrator CC.  I just use the image tracking tool to create a version vector of my company logo.  It worked pretty well, but now I'm just trying to clean it up a bit.  I have a few anchor points that I want to just push upwards or downwards into the smallest possible increment.

  I think it would be easier for me to do using the arrow keys on the keyboard instead of the mouse, but the arrows cause my selected anchor point to jump in too large a distance way.  I checked to make sure that the bearings commented, snap to grid and snap to Point are all extinct.  I don't see anything else to do.

  Can someone tell me which control how the keyboard arrow keys will move an anchor point, and how can I fix this to the smallest possible distance?

  Thanks in advance,
  Paul

  General Prefs, area keyboard Increments. Have something you need.

  Then use Nudge (up, down, left, right arrow).

• How to start to draw with the pen tool, a different anchor point?

  It's as simple as that. How can I change the anchor point where I paint. I use the tool on Illustrator CS6 pen on a tablet.

  Thank you!!!

  for8aby,

  Guides are your friends, depending on whether you want to continue A) the shape of the path (so far) last anchor Point or B) create a new path starting with an internal Anchor Point with the pen tool:

  (A) right click/ClickDrag on/off the last anchor Point;

  (B) click anywhere near the internal Anchor Point, press space, and move the point on the path ( pathcommented for example) until you're here

  (Smart Guides say anchor), and then drag the handles, as appropriate.

  After that, you can continue as ususal.

• CS5: Coloring Anchor Points

  Hello. Clearly I am missing something simple beginner. I'm working on a tutorial, and the indications that I'm in are the following:

  Step 16:

  Select the shape of the bottom and the mesh tool (U) allows to add an anchor point in the left corner, exactly in the middle of the shape of the bottom as shown.
  Paint all the anchor points down of this form with r: 0, G:0, B:0. And paint the points of the best anchor points with R:135, G:96, B:66.

  Here is the tutorial if you want the Visual reference: ustrator http://vector.tutsplus.com/tutorials/illustration/how-to-make-a-magic-book-using-adobe-ill /

  I create a book, and it's at the base, while he was basically two rectangles with a semi-circle in the middle like a spine. I used the NET tool to create a line that divides the shape. I have to assume the cracks behave differently, because I couldn't split paths to make separate, and modifying segments filling of the form ignores the mesh line. So I guess now that a path of mesh is not counted as a normal path. But he tells me to paint all points anchor and two different colors... How the hell can I do?

  I click on the gradient tool, it does not appear anything else that paste a gradient on things slider, which does not affect the fill color.
  Grasping the shape and change color in color the entire shape fill Panel changes...
  Select the Group and try to make a gradient in the gradient panel does nothing, it does not yet record as something that can be filled.

  So who exactly these directions ask me to do?

  Thank you very much!

  It seems that the instructions missing essential information for people who are not very familiar with Illustrator.

  To add a fill to a gradient mesh point, you must first select the direct Selection tool, which is the key has, and then click each item you want to change the gradient mesh. To make this process faster, click and drag on the points that you want to include while holding down the SHIFT key. In this way, you have select each point precisely and can be a little more flexible with what you select. But keep in mind that all the points that you surround yourself with the direct Selection tool will be selected so according to the shapes in your file by dragging through them, maybe not the best option.

  Then with the points chosen, you can go into your color palette and change the color of these points. You will know that the points are selected because they will be filled with a solid color while the unsuccessful points will be 'hollow' which is just a fancy way of saying they're going to be filled with white.

• There is no handles on my anchor points

  Please can someone help?

  I tried to see the bounding box, ctrl and H, etc and there is still no handle for control on my anchor points. I've been Googling for 20 minutes and can't seem to find a solution. Help, please!

  Sally,

  You have created the Anchor Points with handles (smooth as opposed to the corner)?

  What happens if you click or ClickDrag an anchor with the tool convert anchor point (you can Ctrl / Cmd + Z for undo)?

• I don't see the anchor point in my menu, why? I tried to make the visible invisible items...

  Hello world!!

  My name is Tinucca. This is my first time in this forum. I recently bought the package of creative cloud for students. I'm getting started with Dreamweaver and learn to tie things.

  When it comes to creating anchor points, I can't see where the anchor or anchor named, or any regarding anchors in my menu.

  I visited the help page and does not solve my problem.

  I did the path of view invisible items - Visual AIDS - and it does not work either.

  Can someone help me?

  I'm looking forward to any useful answer.

  Best!

  Named anchors are deprecated (deprecated in HTML).  Adobe them removed from the Cloud version Creative DW.  That's why you can't find them.

  From now on, if you link to something on the same web page, give your element and the ID.  The IDS are unique values and can be used only once per page.  IDs can have another name with Aa - zZ alpha characters. No spaces, special characters or the main authorized numbers.

  Example:

  ID = "fantastic"> This is my new fantastic web site

  A link on the same page:

  Fantastic link

  A different page link:

  Fantastic link

  Nancy O.

• Need help to remove the small white lines between attached forms. Still visible even after aligning anchor points.

  Hey, I'm new here, so many apologies if the community has been asked this question several times before. I do a quick search, but couldn't find an answer to my problem anywhere. Would be very grateful for help.

  I'm quite a beginner with Illustrator, so this may be something embarrassing simple!

  But as the title says, I have a very frustrating problem, trying to create an image of polygon. I've been using the pen tool to make triangles, then join all my anchor points with the horiz/vertical align Center. Roads joined look good, until I have add color... Triangles have a very light white line on them, I have tried to delete the anti alias, which solves the problem, but then the triangles look pixelated. Even when you import into Photoshop the pale lines are visible, as well as when the file is merged or saved as a JPG file.

  I've seen some very impressive polygon art and forms look seamless when joined.

  Here is an example of the problem. Ideally, I'd like that forms merged without rough lines.

  See you soon! Any suggestion would be appreciated.

  .

  BRI,

  I just read it again.

  align the center of horiz/vertical

  works on objects, rather than Anchor Points.

  You can have triangles which fail to assemble completely.

  Try this, smart guides are your friends:

  Starting with the last triangle (you can see the stacking order in the layers palette), click the path to find) and work your way upward as follows:

  1) click on the lower triangle with the selection tool.

  2) click on one of the neighbors, and move it to the bottom to be second in the stacking order, then move it a little far, then ClickDrag back by one of the Anchor Points to be aligned corresponding to the lower anchor (Smart Guides say anchor when you are there).

  (3) with the ClickDrag Direct selection tool other anchor Point to snap (you can drag a bit far and back until the Smart Guides say anchor);

  Who should ensure a full adjustment between the two less triangles

  4) continue until you are finished with the other triangles.

• Anchor points for jpg creation

  As a very new user, I am experimenting with creating anchor points from the drawings that I made in Photoshop. I have the simple linework in jpg format and I would like to convert this drawing in eps anchor points. Finally, I would like to clean the lines - correct several curves irregular - and be able to resize the image to an appropriate size. Where can I get information about the conversion of the image of anchor points on the best?

  Thanks for your help. The tracking tool was exactly what I need, and read a bit more about it have helped to define exactly what I had to do to get it to do what I wanted.

• How to create a wavy with coherent wave regardless of anchor point spacing line?

  

  The picture above shows my problem. All have the same zig zag setting the effect, but because of the inconsistent anchor point spacing is inconsistent ripple. Is there a way to make a wavy line that is not a distortion of the anchor point distances? I wish that all my wavy lines to look nice and consistent like this:

  

  The only reason that they are so consistent is the absolute value was used but these lines are all straight and have only 2 anchor points, beginning and end, so the wave is coherent. It is more difficult when the lines are curved and have a different number and spacing of anchor points.

  You can also use the graphic style inside this sample file (AI-CS-5 format, approx. 1 MB):

  https://docs.Google.com/file/d/0b-IWkNSl4y_3RVVaT0Fkb3RaTzQ/edit

• Impossible to create a point of restoration with the error message "task Mgr is damaged or has been tampered with. 0 x 80041321 ".

  Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic

  I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
   
  
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
   
  I suggest you try the steps mentioned below.

  Steps to re-create the Task Scheduler:

   
  a. Click Start; in the start search type regedit.exe and press ENTER.

  If you receive a consent prompt, click Yes.

  b. navigate to the following location.

  HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.

  c. save the changes and then close the registry editor.

  Now check if the Task Scheduler works.
   
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
   
   
  Method 2:
   
   
  Step 1:
   
   
  I first suggest you to check if the Volume Shadow Copy service is running.

  a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.

  b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  c. If it is stopped, select start or restart.

  Check if you can try to create restore points after starting the service

   
  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Step 2:

   
  If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.
   
   
  Disable the antivirus software:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
   
   
  You can also try to remove the job from the location:

  C:\Windows\System32\Tasks

   
   
  How to find which task is damaged or altered.

  a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
  b. now run the following command

  schtasks/query | findstr /i

  Search

  ERROR: The task image is corrupt or has been tampered with.
  ERROR: Task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  
  a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. the component shares of the Scheduler dialog box, click on create a task and check.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• You use the stylus to remove an anchor point or create a curve?

  When you place the pen tool on the anchor points on an open path, it shows a sign-, but when I click on the anchor does not remove the anchor, and if I click on the anchor a second time turns into triangle symbol to create a curve.

  1. Why does sometimes delete anchor point when the - sign appears and I click an anchor point, while other times it does not work?

  2. What is the shortcut to go directly to the side of the triangle without having to double click on an anchor?

  Thank you.

  Are you referring to the endpoints of a path?

  In this case it must be

  -use the subtraction-anchor-tool or

  -Select a point with the direct Selection tool, and then press the delete key

• I'm trying to create a slideshow in Adobe Muse using anchor points, and I wonder if there is a way to create an effect of closure of an anchor to the next.

  I tried to create a slide show with animation of text in and out with each new slide in Adobe Muse. With the help of anchor points, so I created a manual slideshow, however, I wish it would be automatically loop. I don't know if it's possible, but you can do a loop of an anchor (and upwards)?

  You can try this:

  http://musewidgets.com/products/text-cycler-set-2

  Thank you

  Sanjit

• Help with anchor points

  After some research, I decided to open my own ticket and try and get this resolved, or at least learn more about the functioning of the anchor points. I wanted to design my Web site for people with monitors of resolution higher than most of the people have full HD monitors BUT frame the site it is also visible on a laptop computer that will be the smallest resolution, as I updated my page width 1300 pixels which, for me, does not seem over the top. Here is a screenshot of the layout of my site.

  If you notice that the anchor at the bottom left is aligned with the edge of browsers, but when you click on the link further down the page the page horizontally derivatives, but when I run physically scroll image if switches back to place, I would like to know if this is possible or if there is a better way to create a great site that allows people with higher to see more of my images resolutions , but not leave out people with lower resolutions.

  Edit: This is a quick edit to say that I have the selected page as centered in the page properties menu and I have Centre of the United Nations it seems to work fine but of course everything is left justified so I lose a few details on the left edge, just don't feel good

  Instead of using an image of 1300 create a rectangle of width and set your image as the fill for the rectangle. It will then adjust to the users screen but keep your content and anchors of tact and centered.