Creating device ID and token for DPS API "access denied."

Similar Questions

• Creating the folder and by assigning the role access list, approach programmatic

  Hi all

  I have a requirement to create the folder and assigning RAL in the folder created by the UCM (11.1.1.8) program

  I found RIDC API to use for creating folders, can I use the same for the assignment of RAL, pointers?

  Thank you

  You get errors?

  This blog can be useful: adding a file in folders of the WebCenter RIDC content frame. Niels Krijger

  Jonathan

  http://jonathanhult.com

• Is there a way to query users for specific api access on app download?

  For example, we need access to net_rim_bbapi_phone in a part of our application.  Currently, the application prompts the user for access... unless the user has enough foresight to check "Set application permissions" before downloading and then comes to allow access to bbapi_phone by default.

  Would be nice if we could draw the attention of the specifcially from the user to the fact that we need access to net_rim_bbapi_phone to download.

  You can use the ApplicationPermissions and ApplicationPermissionsManager classes to allow your application to request the settings as needed.  For an example, take a look at the applicationspermissionsdemo provided with the BlackBerry JDE.

• Thin client HP 5740e: HELP! Expired password and should be changed but access denied when you try to do

  Hello

  I have a thin client HP 5740e and for some reason any local user account requires a password change.  Yet, when I try to change the password it says access denied.  And yet, I can't it to allow me to move to another counts as administrator to open a session.  I held down the SHIFT key during startup, but it always goes straight to this local user account & the expired password prompt. I'm stuck in an infinite loop and do not know how to cope.  Safe mode puts me in the same situation.  And I can't update the BIOS because I can't have everything.

  OS = Windows Embedded Standard 7

  I also tried to reinstall the last image of the HP Web site using a USB key, but it fails every time. I tried 2 different USB drives with the same exact error no each.

  Image, try to install = SP56020

  ERROR: An unexpected condition has occurred

  Does anyone have a suggestion?

  I finally could get as an administrator using RDP to my office.  I didn't know the name of thin client lacked a figure, that's why I've been unsuccessful before that.

  Once I got away, I could watch the local user account permissions.  Now I see what was wrong.

  [Check]      The user cannot change password

  [Disabled] Password never expires

  I still don't know why I couldn't install a new image of the plant, but at least I am now able to work with this device.  I also disabled the automatic connection at the moment.

  Sorry to have littered the Forum!

• Hard drive crashed and now 'My Documents' reports 'access denied '.

  My drived by 'C' crashed. I replaced the trive and install a new copy of XP pro on a new drive. I plugged the old drive as slave and when I go to the 'Documents and Settings' area I am able to open most of all files except thoes in "Documents and Settings/username / My Documents". This directory and several others in the 'Documents and Settings' box report "Access denied" when I try to open them.

  Hi 1handclapping,

  You will need to take ownership of files or files that refuse to that you access from your old hard drive.

  Please see the following article:
  http://support.Microsoft.com/kb/308421

• How to create browser packages and locale for Ubuntu/Debian

  Since Ubuntu Mozilla Daily app is more regularly so being updated (see https://launchpad.net/~ubuntu-mozilla-daily/+archive/ppa ), I want to build my own self-signed Firefox packages similar to those created by Ubuntu Mozilla daily; but I can't find anywhere how they are built.

  In fact I compile Firefox, so I need just the information necessary to build a deb with her package.

  Thank you

  Hello izietto,

  Please contact the Mozilla Support. Thank you for your question, but unfortunately it is out of the scope of what we are able to answer.

  I would suggest checking outStack Exchange and ask your question there.

  Please let us know if we can help with any other questions.

  See you soon,.
  Patrick

• Cannot create disks C and D for the programs and data on HP Pavilion dv6-6c53cl with 1 TB HD

  Just bought new HP Pavilion dv6-6c53cl Entertainment Notebook - 1 TB HD (it's good).

  Bad news is that there are FOUR partitions (C, SYSTEM, RECOVERY, TOOLS HP) with the C-drive with 904 GB.   If I understand correctly, you cannot shrink C and create a 5th partition for data.  It seems that you cannot have more than four partitions...

  (quote from sevenforums.com: ' you already have 4 primary partitions - you can't have more. ") If you try to make another c: partition using disk management, you will turn your (entire) disk into a dynamic disk. You don't want to do that! »

  HP experts: Is it true? I can't shrink C and create a disk for data D?  Can I combine one or more of your three auxiliary drives (SYSTEM, RECOVERY, TOOLS HP) and a disk for data D?

  I've always heard that it was not a good idea to combine all, Windows programs, system etc all in the same giant partition with lots of photos, songs, financial data, Word files, etc etc.

  Please notify.

  I have a 1 TB hard drive and use the main C for all files. I use images software to make my own custom recovery solution, having 1 large partition makes it simpler. Custom recovery options

  However, your question is how to have another partition. Daniel made a Guide on everything this HERE

• Any attempt to create 2nd instance and links for Ingres Oracle conversion

  I have an oracle instance called ORCL which has been implemented with a DB link to the Ingres database and it market. I want to create
  a second instance using the same binaries so that am not a developer. Using DBCA I created CONVERT.
  
  Here was my memory is faulty as to how the first case has been implemented. I have create a db link and also the entries in the
  ORACLE_HOME\hs directory for the init.ora I have a listener clocked at it lists two instances in the sid_list...
  then, when I try to query the ingres database I get
  
  ORA-28500: connection between ORACLE and a non-Oracle system returned this message: name [Microsoft] [ODBC Driver Manager] Data Source is not found and no driver specified default.
  ORA-02063: preceding 2 of SDFA_INGRES lines
  
  
  My oracle database is on Windows. This is Oracle 11
  
  ORACLE_HOME is ORCL and CONVERT F:\apps\oracle\product\11.1.0\db_1\
  
  Db_2 is set up for the 2nd instance to only the redo logs and control files...
  
  db_1\hs has two files init... one for ORCL and CONVERT
  
  initsdfa_odbc.ora
  
  # HS init parameters
  
  HS_FSD_CONNECT_INFO = sdfa_odbc
  HS_FDS_TRACE_LEVEL = off
  
  
  TNSNAMES. ORA
  
  SDFA_ODBC = < < < this is my 2nd entry... the other is still different name... > > > > > >
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SID = sdfa_odbc)
  )
  (HS = OK)
  )
  
  
  
  LISTENING PORT. ORA
  
  
  Under the SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = sdfa_odbc)
  (ORACLE_HOME=F:\apps\oracle\product\11.1.0\db_1) < < < binary for both... I have a db_2 for file locations
  (program = dg4odbc)
  )
  
  
  
  My link is public
  
  Create the database link public "SDFA_INGRES" connect "DBA" identified by "*".
  using 'SDFA_ODBC ';
  
  
  My pick is the instance to CONVERT as SYS...
  
  Select count (*) in test_table@SDFA_INGRES;
  
  and then I get the above error.
  
  What I'm missing or wrong? Can I have 2 HS services defined in a listener or a need to separate the listeners?
  
  Appreciate any assistance. Excuse my typos... I am on another system and can't cut and paste. So I might have
  a few typos... thank you.

  I don't know that it's a specific thing to Ingres. Maybe this helps:

  http://community.Ingres.com/wiki/How_to_Create_an_Ingres_ODBC_Data_Source_Definition

  -Andy

• Create log file and outputfile for custom applications

  Hello
  I created a new competing application, the method of execution: "Stored Procedure PL/SQL", that allows to run a stored procedure of SRS.
  
  I want to know, how to create an output file of this application? In addition, it creates the log file in itself, but how do I create a custom log file so that the stored procedure can write its logs it?
  
  Thank you.

  Hello

  Please see "The Oracle Applications Developer's Guide" manual, chapter 21.

  The Oracle Applications Developer's Guide
  http://www.Oracle.com/technetwork/documentation/applications-167706.html

  Thank you
  Hussein

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• SQLFire: Failed to start and then can not close-"Access denied" &amp; "could not start the"sqlfire"database

  I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

  My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

  I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

  I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

  I'll be dilly, or is it a problem in general, experienced by others?

  I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

  I appreciate your time and efforts.

  Hello

  I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

  Please, use the start command to start in the background of a single command window / batch script:

  beginning of "locator" cmd /c sqlf locator...

  beginning of "server1" cmd /c sqlf server...

  etc.

  Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

  Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

  Thank you

  Felicia

  Post edited by: SumedhWale

• What is the unknown file with lots of letters and numbers. I get access denied.

  I spent my files on my computer and I came across a folder that has a bunch of letters and numbers... I tried to open it to see what it was and he repeated access is denied. Why does say his refusal so im the administrator?

  However, you are an administrator, but you have not all permissions to access some or record system. To do this, you will need to take ownership of the file or folder to access this topic. Do not forget that the change or deletion of records that are denied access may cause problems on your computer.

• "Access denied" message in Device Manager

  I can't update the driver software in all my gear installed on my computer via a right click on it in Device Manager. It happens to the progress bar 'Software Installation pilot' before stopping and give me a message "access denied." Why would he do that? I'm the only one who touch my computer, it uses a lot less.

  In addition, how can I bypass the "Access denied" message and give me permission to do stuff like that?

  Hello

  Thanks for posting your question in the Microsoft Community!

  I see from the description of your post, that you are getting the error message access denied when updating driver software.

  1. The user account has administrator user account privileges?
  2. You're the admin?

  You can check out the following link and check:

  How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  I hope that helps!

  If the problem persists, or you need help on Windows please keep us informed.

  We are here to help.

• Access Denied (EditView) - when you try to create a tile of the Performance

  Hi all

  When I am trying to create a tile of the Performance, I get Access Denied (EditView) erorr, it means that I don't have permissions to change views?

  I am able to add tile performance for results but unable to change it (I see not the pencil mark)

  Can anyone confirm

  
  

  Please check the attachment for the screenshots

  
  

  Thank you

  If you go to Administration and change privileges, there are a lot of possibilities for displays in responses and users, the catalog groups and applications can change.  You should be able to change access from there.

• Get 'Access denied' vCloud API client after the time-out period

  The .NET tool we build against the API for vCloud strike sometimes a timeout, which will essentially all subsequent calls (at least for the namespaces for example VAPP, Vdc and VM) fails with an access denied message. There is no doubt that this is because a timeout, because that happens only after a certain amount of inactivity.

  Now, I want to try and detect this "timeout" somehow and act accordingly, for example automatically trigger a disconnection and the client connection (instead of making mistakes). The other option is to have a thread keep alive session by calling some resources very, but really, I don't like the idea of ever having any connected clients.

  Any thoughts on how I can detect that the time-out has hit? I can't count on the fact that "Access denied" mean timeout...

  Thank you!

  / Stefan

  infinitesorrow wrote:

  It's a good suggestion, only that I do not directly use the services REST, but the VcloudSDK and the vCloudRestSchema DLL to in .NET... What would be the equivalent of/api/sessions?

  I'm not sure.

  I'm not a .NET programmer (and don't see anything useful in the .NET SDK documentation), but I don't know that the Java development kit has a RestUtil class with a method 'get' that runs on a URL specified by the arbitrary appellant that could be called "/ api / sessions" to do something in this direction in Java. The .NET development kit may have a similar utility class with such a method?