Creating slideshows in first pro cc

Similar Questions

• sort of create markers in first Pro CC 20141?

  One of the great features of FCP7 was that it allowed us to create extended markers.

  I am consulting a documentary long interview and I would like to be able to set markers extended rather than simple markers.

  
  

  Is it possible to do this in the latest version of first Pro CC?

  Hi Ninose11,

  ninose11 wrote:

  One of the great features of FCP7 was that it allowed us to create extended markers.

  I am consulting a documentary long interview and I would like to be able to set markers extended rather than simple markers.

  Is it possible to do this in the latest version of first Pro CC?

  Option + do drag the marker.

  Thank you

  Kevin

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• I first Pro CC and you want to create DVDs. How do I do that?

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Title edited by Kevin Monahan

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  This thread with unreleased track is in the forum again.

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

• I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  - and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

• My first pro cs6 adobe freezes when I create a title?

  My first pro cs6 adobe freezes when I create a title?

  Hi Caleb,

  What is the operating system that you are using?

  You have third-party fonts are installed on the computer?

  Close Premiere Pro.

  Go to the Documents folder > Adobe\Premiere Pro\6.0\Styles and remove workingset.prsl

  Check again.

  Vinay

• I can create a DVD without using STILL on Adobe first PRO CC 2015

  Can I create a DVD without using STILL on Adobe first PRO CC 2015?

  Yes... but why, since even comes with a Premiere Pro subscription?

  -More instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html if you have a subscription

  - and the difference in the Cloud application manager 2015 https://forums.adobe.com/thread/1906752

• How can I create a hyperlink in the title in first Pro CC?

  How can I create a hyperlink in the title in first Pro CC?

  How to put a clickable link on a youtube video 2014 - YouTube

  MtD

• First Pro CC does not create a new sequence with a new project

  I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.

  In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.

  In CC, once you have created a project, you end up looking at an empty timeline.  You then go to the file, new, sequence and it do.

  Looks like a strange step to include, no?

  Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?

  Yes, as Jim mentioned, there are other ways to create a sequence.  For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip.  Or in the project Panel, drag an item to a new item icon.  Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.

• I created an adobe account but I couldn't test downloadable adobe first pro m

  I created an adobe account but I couldn't test downloadable adobe first pro m

  See Tech sheet. All video applications require a 64-bit operating system.

  Mylenium

• First pro takes a long time to open

  Hello

  I recently installed the latest version of first (2015.4) on a Windows 7 x 64 service pack 1.

  Config: Intel (r) CPU Xeon X 5660 2.80 GHz 2.80 GHz (2processors).  -40 GB of RAM

  There's a blackmagic decklink which works well with the first. An internal RAID5 have been added to the computer.

  When I try to launch the pro first by clicking on the icon or open a project, the startup screen and load the stuffs, everything looks good. When he writes "initialization of the application", the splash screen disappears. The first pro icon is not highlighted more. Adobe Premiere pro is still in process in the Manager list task. Nothing happens for 10-15 minutes. After that first pro appears and everything works in it...

  I cleaned the trash prefs and uninstalled, reinstalled Premiere pro.

  He not take this time early in the week, he was quick and direct. I don't have this problem for other adobe (for example media encoder) applications.

  Thanks in advance to pay attention to my problem.

  A few thoughts that come to mind are to check and remove any third-party firewall and antivirus.

  You could also try creating a new user account Admin and see how it works there.

• No audio with m2t-clips imported in first pro cc 2015.4

  Hello!

  This problem is with premiere pro cc 2015.4 output. When you import clips m2t project, there is no audio track. I also tried to ingest the files and ingested turned out with no audio as well. Even the audio information lacked after ingestion.

  for example, VLC media player and grass valley edius performance audio clips without any problem. I also tried the option "Edit in adobe audition", and the audio transferred to listening was completely silent/vacuum wave, no sound at all.

  These clips have worked perfectly with the previous premiere pro version. What I come to GV Edius again to face the edition?

  This problem started with the 2015.4 update. There will be a solution for this? At present, the new premiere pro is completely useless for me. I can't use footage captured with my Sony Z5E-camera at all.

  Please do not ask me how to transfer videos to my project etc other nonsense questions. I have been editing videos for more than 15 years, I know what I'm doing.

  Cheers, Mikko Tirkkonen

  Producer of the AV, Finland

  It could be your preference files.  I had the same problem and complete these steps.

  Mac: \Users\Library\Application Support\Adobe

  Windows: C:\Users\\AppData\Roaming\Adobe

  Beware, if you follow these steps, all your preferences, workspaces, exclusives be lost.  You will return to default values.  Proceed at your own risk.

  1. close all applications.

  2 rename the Premiere Pro (e.g. first Pro_OLD) folder.

  Forcing Premiere Pro to re-create the default preferences.

  3. restart Premiere Pro and check.

  If the above does not work, delete the newly created folder of Premiere Pro and rename the "OLD" its original name folder.  At least you'll be no worse turned off.

  There is a most brutal stage that you wish to consider, which erases the entire Adobe folder and not the first Pro folder it contains.  I mention it here, but advises against procedure unless you are really comfortable with working within Windows.  Same warning, proceed at your own risk.

  You'll need to start your PC in safe mode, while none of the Adobe services are running.

  Navigate to the location above, but remain a plu top folder (for Windows: C\Users\\AppData\Roaming) and rename the Adobe Adobe_OLD folder.

  Restart your PC normally

  Again, you can always return by from your PC in safe mode, delete the newly created folder from Adobe and restore his former.

• First Pro exports only my audio, not the video

  I'm a beginner to this program, so please bear with me.  I'm in first Pro CC (2015.3) v 10.3, blue Fox on a PC with Windows 7 Pro. The Media Encoder is also Media Encoder CC (2015.3). When I queue to export the Audio/video file, I chose H.264 and AAC Audio.  The video and audio of boxes are ticked for export.  I have the game - high-speed selected Source and preset of Facebook.  Is the screenshot after I encoded the file, but I am able to see the process of Audio and video, while it exports the file.

  Here is the screenshot of my Premier Pro screen. I had created a couple of these slide shows before and everything worked very well.  Now for some reason, there is only Audio now.  I tried it with two series of photographs with the same results.

  Any help is appreciated and I apologize if this is a repeat problem, but I don't see anything that fits my situation specifically.

  When you are working in a new project (or new sequence) and you add the first piece of media in your timeline (sequence), if the media card to match the settings of the sequence, it will ask you "Do you want to change the sequence to match the media" and you have done this, no other way to get an image size of 4608 x 3456, which is not equal to any standard video format. Is also 4:3 and not 16:9 for the video output screen. So unfortunately, if the configuration of the sequence is bad at first, your project is built on a poor Foundation that will cause problems later when you try to export to a standard format.

  If you want to put the video on Facebook, that would be 1920 x 1080 or 1280 x 720 for instance (1080 p or 720 p). Your sequence should be created accordingly before adding any media. In Prefs or sequence by sequence, you can use the size value of the frame to have the media scale in sequence (photos/video will scale to fit the image).

  Try changing the size of the image in your sequence up to 1920 x 1080 settings. You may need to click on the pictures and also the value size of the frame.

  EDIT: also change the audio sample rate of 32000 to 48000 which is more standard and superior

  EDIT 2: If you put 4:3 pictures in a 16:9 frame, yes you get black bars on the sides. As the top and bottom of the pictures of the boat may be just the water and the sky in any case, you can change the image until it fits left to right, cropping the top and bottom which you can't miss anyway. Can also set vertically then necessary. Use the Adobe movement controls for these actions, found in the effect controls panel.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Pipette does not work in Ultra key on first Pro CC 2015, V. 10.3.0 (202) Blue Fox

  Thanks in advance for any help that others can provide:

  I've just upgraded to Adobe first Pro CC 2015, V. 10.3.0 (202) Blue Fox

  and now, pipette does not work in Premiere Pro CC Ultra key 2015, (V. 10.3.0 (202) Blue Fox)

  I am running:

  iMac (retina 5K, 27 inches, end of 2015), 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3,

  The graphics card is a Radeon R9 M390 AMD 2048 MB.

  I am running: OS X 10.11.6 15 G (31), kernel version: Darwin 15.6.0

  OS X 10.11.6 (15G 31)

  Everything was fine until this last update of first CC last week!

  I just started this green screen project. I cannot choose a color using the pipette for "ultra-cle". If I use the eyedropper tool to try to choose the Green tint in the background color box flickers and then returns a black value when you click it.

  If I try to select the eyedropper tool in the color picker, he will not choose the color.

  If I "eyeball color", then Ultra key works, but this process is very error and time consuming!

  There's a comrade on the Adobe Forum which fixed the same problem by ' I've just upgraded to Adobe first Pro CC 2015, V. 10.3.0 (202) Blue Fox ".

  iMac (retina 5K, 27 inches, end of 2015), 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3,

  The graphics card is a Radeon R9 M390 AMD 2048 MB.

  I am running: OS X 10.11.6 (15 G 31) m, kernel version: Darwin 15.6.0

  OS X 10.11.6 (15G 31)

  Everything was fine, until this first CC upgrade last week!

  I just started this green screen project. I cannot choose a color using the pipette for "ultra-cle". If I use the eyedropper tool to try to choose the Green tint in the background color box flickers and then returns a black value when you click it.

  I try to select the eyedropper tool in the color picker, he will not choose the color.

  If I "eyeball color", then Ultra key works, but this process is very error and time consuming!

  There is an editor on the Adobe Forum which says that, "I ran like a root user and ran to first, magically fixed the problem. I had to create a new admin user, copy all my files from personal documents, then delete the old user and use the new user as my default. »

  Before I try this - it seems crazy to me - everyone knows this situation?

  Thank you in advance for your time and trouble,

  Barry O'Brien

  Problem is solved. Called the 800 number for Support Adobe. At Rahul S. on the phone in 5 minutes or less. He took over my computer.

  In the order of events, Rahul has tried:

  Throw the .plist files, restart - fail

  A new test sequence - has failed.

  Media cleaned in the database cache - cache fail

  Created the new library > App Support > common file - fail

  Latest version RELOADED first Pro CC - 9.0 - fail

  Created new user after trying to open my iMac as a user root - worked.

  Create a new user, reloaded Premiere Pro CC 2015 10.3 - all what God.

  This is the solution - the solution very provided by other users on this Forum a few months ago!

  Thanks to all those of you who pitched in. I hope to help you one day!

  Kind regards

  Barry O'Brien

• Error code 6 on export (FIRST PRO CC)

  Hello world

  A few days ago, my first Pro CC (2015.3) update

  Before this update my project and my first well worked!

  Now I have an error when I want to export my movie.

  This message comes directly after the launch of the export.

  

  I tested different solutions (other formats, import my sequence in a new project, reset my presets, make, does not work with Media Encoder...)

  I didn't ' see this problem anywhere... Maybe someone can help me?

  Thank you!

  [Left the general forum, troubled Lounge for a specific product - Mod support forum]

  Hi Juliend,

  Please run a test, create a new sequence and remove audio who.

  Try to export your sequence again (without Audio).

  Thank you

  Ilyes Singh