creating the Oracle DB for tools 8.50 under Unix

Similar Questions

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• create the code lock for computer book note

  How to create the code lock for computer book notices

  Enter the BIOS, select the Security tab and set the power on password.

  I strongly recommend that you write the power on password and put somewhere safe. If you have forgotten the password turned on, you will find that you will need to send your laptop to be repaired by HP. This is not free of cost. Once a button inside the laptop password reset are over.

  I can't be more precise, as you have not identified your laptop with its full product name or product number.

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• How to create the firewall rule for Windows 7 for javaw.exe?

  How to create the firewall rule for Windows 7 for javaw.exe? The application path differs from the new versions and user profiles. Is there generic symbols allowed for example asterisk?

  Hello

  I recommend you to send the request to another Department for assistance:

  Security in Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threads

  I hope this helps.

• WLST Script to create the domain weblogic for IOM and OAM

  Hello

  I intend to set up PS3 IOM - OAM in the new environment. We intend to perform the installation in silent mode. Does anyone have example WLST to create the domain weblogic for IOM or OAM?

  Thank you

  Here is an example of OUD. I post this one since it's the simplest and shortest, but it is the same for OAM and IOM except that the script is much longer because they ask a lot more questions. You will need to export the variables used or replace them with the appropriate values for your system.

  wait-<>

  the value of timeout 600

  spawn ${OUD_BASE}/${WLS_NAME}/common/bin/config.sh mode = console

  # Create a WebLogic domain

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Choose the components of the Weblogic Platform

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # | ___Oracle directory Services Manager - 11.1.2.3.0 [Oracle_OUD1] [3]

  wait {}

  {"Enter number exactly as it appears in the media *" {send "3\n"}}

  wait {}

  {"Enter number exactly as it appears in the media *" {send "n"}}

  # Change the domain information

  wait {}

  "" Enter the value of * "{send" ${OUD_DOMAIN_NAME} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Select the target area for this domain directory

  wait {}

  {'Enter' new target location GOLD * {send "${OUD_BASE} / user_projects/domains\n"}}

  wait {}

  {'Enter' new target location GOLD * {send "n\n"}}

  # Configure password and username administrator

  wait {}

  {"Enter the number of the option to select GOLD *" {send "2\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Configuration mode field-> 1 | Development mode

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Java SDK selection

  wait {}

  {"Enter the index number to select GOLD *" {send "2\n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "${JAVA_HOME} \n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "n\n"}}

  # Select Optional Configuration

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "n"}}

  # Configure the Administration Server

  # Change "Listen port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_PORT} \n "}}"

  # Change 'SSL enabled.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Change 'SSL listening Port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_SPORT} \n "}}"

  # Then

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # wait for install

  wait {}

  {"Successfully created * field *" {send "\n"}}

  EXPRESSIONS OF FOLKLORE

• Use the stored procedure to create the data model for the bi publisher report

  Hi all
  
  Can we use stored procedure to create the data model for BI Publisher reports? I did find an example by using the stored procedure to complete the data model in the bi publisher report.
  
  Thank you
  
  Virat

  Check out these links

  BI publisher to use the stored procedure
  Re: Stored procedures and dynamic columns
  Re: Is it possible to use stored procedures in BI Publisher GUI?
  Re: PL/SQL stored w / model XML?

  If brand pls help

• What is the meaning of the different fields of the Oracle software for example 11.1.0.2.0

  What is the meaning of the different fields of the Oracle software for example 11.1.0.2.0
  
  Please share.

  Hello

  For example 11.1.0.2.0

  1 - the database major version number
  2nd - maintenance of database version number
  3rd - version number of the application server
  4 - the specific component version number
  5th - the platform specific version number

  Link target:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/dba004.htm

• Only the Oracle Gateway for ODBC come preinstalled witn OracleXE 11.2?

  6.2 64-bit CentOS
  Oracle XE 11.2 64-bit
  
  The Oracle Gateway for ODBC come pre-installed with 11.2 OracleXE?
  If not, where can I get this software and how I installed it?
  (I'm used to using the edtions SE and EE of the database as well as XE).
  
  See you soon!

  The directory must be different from your durectory u01/app/oracle/product/11.2.0/xe xe. Use a meaningful name like /u01/app/oracle/product/11.2.0/gtw - just a different subtree is sufficient.

• Unable to create the resource portal for contentListTemplateDef

  Using JDeveloper 11g PS 5 and WebCenter spaces.
  We try to create a list of content model definition Presenter. We have already created a definition of model element that went well.
  
  If we have a simple definition of the list of Presenter content model:
  
  <? XML version = "1.0"? >
  < jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1".
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
  xmlns = "http://xmlns.oracle.com/webcenter/content/templates" >
  < var dt:contentListTemplateDef = 'nodes' >
  < af:panelGroupLayout layout = "vertical" id = 'list' valign = "top" >
  < af:iterator lines = '0' var = 'node' varStatus = 'iterator' value = ' #{node} ".
  ID = "i1" >
  < dt:contentTemplate = view node "#{node}" = "dagberichtListItem."
  nodesHint = ' #{node} "id ="ct1"/ >
  < / af:iterator >
  < / af:panelGroupLayout >
  < / dt:contentListTemplateDef >
  < / jsp:root >
  
  and click on 'Create the Portal resource', JDeveloper shows following error messages and blank window and finally a NullPointerException.
  
  April 12, 2012 18:04:41 oracle.webcenter.portalframework.genericsiteresources.internal.model.GenericSiteResourcesManagerImpl
  WARNING: Error getting resource group: oracle.webcenter.webcenterapp.resource.WebCenterResourceBundle
  April 12, 2012 18:04:41 oracle.webcenter.portalframework.genericsiteresources.internal.model.GenericSiteResourcesManagerImpl
  WARNING: Error getting resource group: oracle.webcenter.webcenterapp.resource.WebCenterResourceBundle
  April 12, 2012 18:04:43 oracle.webcenter.content.internal.templates.registry.TemplateRegistry getDefaultCategoryTemplate()
  WARNING: Invalid Configuration for the id of the category ' *'. Did not view defined for the id of the view ' *'.
  April 12, 2012 18:04:43 oracle.webcenter.portal.dt.appnav.SiteResourcePanel init
  WARNING: Error initializing the Portal Resources dialog box.
  java.lang.NullPointerException
  at java.util.Hashtable.get(Hashtable.java:334)
  at oracle.webcenter.portal.dt.appnav.ResourceAttributesPanel.actionPerformed(ResourceAttributesPanel.java:161)
  at javax.swing.JComboBox.fireActionEvent(JComboBox.java:1240)
  at javax.swing.JComboBox.setSelectedItem(JComboBox.java:567)
  at oracle.webcenter.portal.dt.appnav.ResourceAttributesPanel.initFields(ResourceAttributesPanel.java:555)
  at oracle.webcenter.portal.dt.appnav.ResourceAttributesPanel.init(ResourceAttributesPanel.java:491)
  to oracle.webcenter.portal.dt.appnav.ResourceAttributesPanel. < init > (ResourceAttributesPanel.java:110)
  at oracle.webcenter.portal.dt.appnav.SiteResourcePanel.init(SiteResourcePanel.java:219)
  to oracle.webcenter.portal.dt.appnav.SiteResourcePanel. < init > (SiteResourcePanel.java:73)
  at oracle.webcenter.portal.dt.appnav.PortalMenuController.handleCreateSiteRes(PortalMenuController.java:458)
  at oracle.webcenter.portal.dt.appnav.PortalMenuController.handleEvent(PortalMenuController.java:182)
  at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
  at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
  at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)
  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
  at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
  at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
  in javax.swing.plaf.basic.BasicMenuItemUI$ Handler.mouseReleased (BasicMenuItemUI.java:850)
  at java.awt.Component.processMouseEvent(Component.java:6290)
  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
  at java.awt.Component.processEvent(Component.java:6055)
  at java.awt.Container.processEvent(Container.java:2039)
  at java.awt.Component.dispatchEventImpl(Component.java:4653)
  at java.awt.Container.dispatchEventImpl(Container.java:2097)
  at java.awt.Component.dispatchEvent(Component.java:4481)
  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
  at java.awt.Container.dispatchEventImpl(Container.java:2083)
  at java.awt.Window.dispatchEventImpl(Window.java:2482)
  at java.awt.Component.dispatchEvent(Component.java:4481)
  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:648)
  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
  in java.awt.EventQueue$ 1.run(EventQueue.java:607)
  in java.awt.EventQueue$ 1.run(EventQueue.java:605)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)
  in java.awt.EventQueue$ 2.run(EventQueue.java:621)
  in java.awt.EventQueue$ 2.run(EventQueue.java:619)
  at java.security.AccessController.doPrivileged (Native Method)
  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
  at java.awt.EventQueue.dispatchEvent(EventQueue.java:618)
  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
  
  Pointers? I'm guessing that the clue is in the category id, the id of the view, etc., where he expects a value but found none, but so far no luck.

  Jaap,

  I am connected to a SR for the same problem a few months ago and development focuses on this issue.
  It is now a bug :)

  Resolution:

  You need to add a piece of XML code for the fichier...\DesignWebCenterSpaces\mds\oracle\webcenter\siteresources\scopedMD\s8bba98ff_4cbb_40b8_beee_296c916a23ed\generic-site-resources.xml

  Add this piece:

  
  
  
  
  
  
  
  
  
  
  

  You should put it inside the tag
  Restart JDev and try again.

  The problem is that there is no definition of the resource for a multi item template, so the null pointer exception.
  Add this tag will fix this.

  Kind regards

  Rob

  PS: The file might be elsewhere, this is the location of the PS4 if I'm not mistaken...
  You open the file from the Explorer, because it is not accessible from JDev.

  Published by: rgouw on April 12, 2012 11:09

• Error creating the Spatial Index for SRID 8307 on newly hardened database

  Oracle 11g Rel2, Windows 2003 platform
  
  Help, please...
  
  Meeting with error message:
  ERROR on line 1:
  ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE
  ORA-13249: internal error in the Spatial index: [mdidxrbd]
  ORA-13249: geodetic initialization error turn
  ORA-13249: SRID 8307 does not exist in the table MDSYS.CS_SRS
  ORA-29400: data cartridge error
  ORA-04063: package body 'MDSYS. SDO_CS"contains errors
  ORA-06512: at the 'MDSYS. SDO_INDEX_METHOD_10I', line 10
  
  After running the command
  
  INSERT INTO USER_SDO_GEOM_METADATA VALUES
  ("PointGeometry",
  "pointGeom,"
  MDSYS.sdo_dim_array (mdsys.sdo_dim_element ('Longitude',-180, 180, 1),
  mdsys.sdo_dim_element('Latitude',-90,90,1)),
  8307
  );
  
  CREATE the INDEX IDX_POINTGEOMETRY on PointGeometry (pointGeom) indextype is mdsys.spatial_index parameters('LAYER_GTYPE=POINT');
  
  When I ask mdsys.sdo_cs I see that there are actually SRID 8307. This index was created in this schema without problem. The problem only arises once the hardened customer database and we tried to recreate the schema (and index).
  
  Probably not coincidentally, I also get error:
  ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE
  ORA-04063: package body "CTXSYS. DRIXMD' has errors
  ORA-06508: PL/SQL: called program unit is not found: 'CTXSYS. DRIXMD ".
  ORA-06512: at "CTXSYS. DRUE", line 145
  ORA-06512: at "CTXSYS. TEXTINDEXMETHODS', line 366
  ORA-04063: package body "CTXSYS. DRIXMD' has errors
  ORA-06508: PL/SQL: called program unit is not found: 'CTXSYS. DRIXMD ".
  
  When attempting to create and index Oracle Text context.
  
  Your help is greatly appreciated.

  Then, that's the problem.

  MDSYS user now has not run, and select privileges on the dbms_lob package.

  You must grant privileges on this package in MDSYS.

  Note that you can run into other issues of privilege package like this, so you must correct all by the granting of the
  required privileges for MDSYS.

  Siva

• 8.5 PT new installtion, script ALTER was mistakenly created the Oracle 10 g.

  Greetings!
  
  I try to install HRMS 9.1 PT 5.0 on Oracle 10.2.0.1. I think I followed the detailed installation steps. As part of storeddl.dms, I performed only ddlora.dms only remaining related databases commented lines. The next step after that CHANGE tables after you import the PPLTLS84CUR project.
  
  When I created the SQL ALTER script... I chose option CHANGE BY the specified Table name. Problem in the script is the same for LONG columns it is also to create statement INSERT SELECT, which is not supported by ORACLE for columns LONG. in reality, it means create a snippet of PL/SQL, wherever he sees a table with a column LONG. On the contrary, it is creating simple INSERT SELECT. Thus the process of Alter generates errors, at the end I would have given in these tables with long columns BECZ the steps generation sequence...
  #1 create temp, #2 effective insertion in temp, real Drop #3, #4 Temp rename real. given that false #2 in the temp wouldn't #3 drops original that includes lines, lines, #4 renames the empty table to the original table...
  
  Is there any song that I missed... Thanks in advance...
  
  Published by: Rama R Dandana on June 11, 2010 12:26

  So can I ignore any task?

  Yeap.

  Nicolas.

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• How to create the file .bat for auto archive locally

  Hi, can someone guide me on creating a file bat for auto archive locally and a volume mounted, daily for an external HD operating system Windows server 2003 stnd?

  Thank you

  Here is the Vista Forums.

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Try the repost in the communities of server above.

  They will help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to create the file .bar for production mode?

  Hello

  How to create a file .bar for production mode?

  When Flash Builder, I configure my project for the mode of Production, he asks me a RIM certificate that must be registered (and then need a CSI file?). Where can I find this file?

  Thank you

  Signature of application information has not yet been published.  You can submit your application unsigned.  In addition, in FB4, in the Properties window of the project, under the Flex compiler, you can add

  -debug = false

  to compile without debugging information.

  Otherwise, .bar file creation is done in a regular compilation with BB CLI package.