create the code lock for computer book note

Similar Questions

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Why don't you have not sent me the code promotion for xbox free deal?

  Hello.

  I am a student and at the end of the month of August, I registered my .edu email for promotional code to buy a laptop computer to the Microsoft store and get a free xbox. Although there was written that Microsoft would contact me shortly, I never get the code promotion, and I have not bought my laptop. Could you please tell me why you did not send me code promotional while the contract offer was still valid or another week.
  Records,

  Hello

  I suggest post you your query in the Xbox support forum.

  Welcome to the Xbox support
  http://support.Xbox.com/en-us/

  Contact us
  http://support.Xbox.com/en-us/contact-us

• Impossible to install Photoshop Lightroom 6.0, because my PC is not a 64 bit system. Tried to download Photoshop Lightroom 5.71 but the code provided for 6.0 cannot be used. Faster ways to solve this problem

  Impossible to install Photoshop Lightroom 6.0, because my PC is not a 64 bit system. Tried to download Photoshop Lightroom 5.71 but the code provided for 6.0 cannot be used. Faster ways to solve this problem?

  Lightroom 5.7.1 is the latest version that is compatible on 32-bit computers.

  LR 6 serial number will not work for LR 5.

  Lightroom version 5 S/N is the separate serial number.

  In this case, you will need to contact the Support from Adobe and to return the product if you do not buy 64-bit computer and see if you can buy 5 LR.

  Contact the customer service

  [Click on always need help (help), then select the Chat option]

• ICloud Keychain how can I change the phone number needed to verify the code text for me? The number it was sent is an old phone number of my friends that I do not have access to the.

  ICloud Keychain how can I change the phone number needed to verify the code text for me? The number it was sent is an old phone number of my friends that I do not have access to the.

  Try this from another thread I saw.

  On iOS, go to settings > iCloud > keychain and tap button to disable iCloud keychain. (you will be asked to delete or keep the passwords on device) I chose to delete...

  Then turn it back on, and pop - up chose reset iCloud trousseau, on a chosen pop-up confirmation reset

  In the new window pop up use iPhone password like iCloud cryptogram? has chosen the use code

  Enter your secret code (4 digits) then choose country and your new phone number

  Although, to "Restore the iCloud Keychain," I took to erase the data and essentially set up a new keychain.  Not the case.  Strangely, after essentially bypassing the security system, setting a new password and verification number, I see my cards, passwords and other data have been restored.  Maybe it's all the iCloud account and this master password.  Or maybe it's a bug.  With Apple, we'll never know.

  Also have a look here: get help using iCloud Keychain - Apple Support

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• PANTONE + does not match the previous Pantone spot color chart. I have several customers who are using spot colors in logos etc and now these colors are a mess. Can I get and use the old color for Illustrator books?

  PANTONE + does not match the previous Pantone spot color chart. I have several customers who are using spot colors in logos etc and now these colors are a mess. Can I get and use the old color for Illustrator books?

  Well, the spot color has not changed, but the way they were simulated four-color changed, they now use color management to get to the nearest ink possible task.

  Here is some info:

  https://helpx.Adobe.com/Illustrator/KB/PANTONE-plus.html

• 19 CD rom error code... computer does not recognize, etc...

  19 CD rom error code... computer does not recognize, etc...

  I tried troubleshooting and I get "unable to set of troubleshooting."
  Please let me know if someone has a possible solution.  I am running Windows 7 family and probably a 5 on the computer.
  Thank you
  JDub

  Hey JDub,

  Please contact Microsoft Community Forum!

  This issue would have occurred after you installed, uninstalled or updated a program or Windows.

  19 code means there is a driver conflict such as two devices attempt to use the same resources.
  
  

  When you say "unable to set Troubleshooting" what Troubleshooter you are referring to?

  You can try the steps from the following link and check:

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Keep us updated on the State of the question

  Using the windows-related issues feel free to post on the Microsoft Community Forum!

• What is the code name for intex fx cloud (required to manually build 2.0)

  I want to manually build the last B2G for an intex phone fx cloud. The build process requires executing the script "config.sh' with the name of the phone code:
  https://developer.Mozilla.org/en-us/Firefox_OS/Preparing_for_your_first_B2G_build#Configuring_the_B2G_build_for_a_mobile_device

  The phones operating system supported firefox page does not display the code name for new devices:
  https://developer.Mozilla.org/en-us/Firefox_OS/Developer_phone_guide/Phone_specs

  Is it possible to get the code for intex phone name. If the list of the devices supported by "config.sh" does not include the code name of intex, is there a way to still be able to build the latest os from firefox for the intex device?

  Hi Notalex,

  The code name for the Intex Cloud FX device is Tarako. However, it uses another optimized codebase that the regular B2G is based so that it can run on lower range with little memory devices.

  Unfortunately, version 2.0 of the B2G code base would go not on the Fx cloud Intex due to material limitations.

  For more information and advanced issues on customizing your Firefox OS device, you can visit the following pages:

  • Tarako Wiki device
  • #B2G on IRC channels

  I hope you find this information useful. Please let us know if you have any questions of usability with your new Firefox OS device.

  Thank you!! =)

  -Ralph

• MobileMe will not let me that post us because that seems to me not having the correct password which I thought to be the same pw for iCloud, but not so much.  How can I me Mail online?

  Product name: MobileMe

  Computer: iMac system 10.7.5 Lion

  Story: My drive hard Snow Leopard is dead, but have an external drive on which I have installed Lion, then Mail began requiring a MobileMe password that I do not have.  MobileMe won't let me use Mail because I do not have the correct password which I thought to be the same pw for iCloud, but not so.  How can I me Mail online?

  MobileMe was discontinued on June 30, 2012.  There is no more MobileMe e-mail.  Go to the preferences panel accounts Mail and remove any MobileMe account which is there.  That should get rid of these messages.

  

• How to get the code produced for my Windows XP disc if I have the drive?

  Acquisition of Product Code Windows XP

  How to get the code produced for my Windows XP disc if I have the drive?  I signed the BONE when I bought it all first, but have no way of knowing if this is the way to receive a copy of the product key.

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  Paid (free demo is available): Recover Keys: http://recover-keys.com/
  "quickly scans your system for more than 3000 + software '.
  and produces a list of software activation keys.

  13 keyfinder programs:
  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  J W Stuart: http://www.pagestart.com

• How to create the .cod file to run on the Simulator BB9900

  Hi, I already from the zip package in order to use the bbwp command to create the .cod file and be able to run on the simulator of BB9900, but when I run this command as described in: https://developer.blackberry.com/html5/documentation/compile_ww_app_for_smartphones_1873321_11.html

  It creates two files, each with a .bar file, this type of file, I can't run it on the 9900 Simulator but a .cod file is required to run applications on the sim card.

  I don't know how to create the .cod file.

  Thank you

  Have you used Blackberry Webworks SDK for smartphone or Tablet SDK? The .cod files should be located in the subfolder OTAInstall of your output folder if you are using the Webworks SDK for Smartphone

• How to create the firewall rule for Windows 7 for javaw.exe?

  How to create the firewall rule for Windows 7 for javaw.exe? The application path differs from the new versions and user profiles. Is there generic symbols allowed for example asterisk?

  Hello

  I recommend you to send the request to another Department for assistance:

  Security in Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threads

  I hope this helps.

• WLST Script to create the domain weblogic for IOM and OAM

  Hello

  I intend to set up PS3 IOM - OAM in the new environment. We intend to perform the installation in silent mode. Does anyone have example WLST to create the domain weblogic for IOM or OAM?

  Thank you

  Here is an example of OUD. I post this one since it's the simplest and shortest, but it is the same for OAM and IOM except that the script is much longer because they ask a lot more questions. You will need to export the variables used or replace them with the appropriate values for your system.

  wait-<>

  the value of timeout 600

  spawn ${OUD_BASE}/${WLS_NAME}/common/bin/config.sh mode = console

  # Create a WebLogic domain

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Choose the components of the Weblogic Platform

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # | ___Oracle directory Services Manager - 11.1.2.3.0 [Oracle_OUD1] [3]

  wait {}

  {"Enter number exactly as it appears in the media *" {send "3\n"}}

  wait {}

  {"Enter number exactly as it appears in the media *" {send "n"}}

  # Change the domain information

  wait {}

  "" Enter the value of * "{send" ${OUD_DOMAIN_NAME} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Select the target area for this domain directory

  wait {}

  {'Enter' new target location GOLD * {send "${OUD_BASE} / user_projects/domains\n"}}

  wait {}

  {'Enter' new target location GOLD * {send "n\n"}}

  # Configure password and username administrator

  wait {}

  {"Enter the number of the option to select GOLD *" {send "2\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter new * "{send" ${WLS_PASS} \n "}}"

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # Configuration mode field-> 1 | Development mode

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Java SDK selection

  wait {}

  {"Enter the index number to select GOLD *" {send "2\n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "${JAVA_HOME} \n"}}

  wait {}

  {'Enter' new JVM Directory GOLD * {send "n\n"}}

  # Select Optional Configuration

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "n"}}

  # Configure the Administration Server

  # Change "Listen port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "3\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_PORT} \n "}}"

  # Change 'SSL enabled.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  {"Enter the index number to select GOLD *" {send "1\n"}}

  # Change 'SSL listening Port.

  wait {}

  {"Enter the number of the option to select GOLD *" {send "4\n"}}

  wait {}

  "" Enter the value of * "{send" ${ODSM_SPORT} \n "}}"

  # Then

  wait {}

  {"Enter the number of the option to select GOLD *" {send "n\n"}}

  # wait for install

  wait {}

  {"Successfully created * field *" {send "\n"}}

  EXPRESSIONS OF FOLKLORE