import problem ORA-01658: unable to create the STARTING point for the segment in your
I created the above tablespacecreate tablespace SAMPLEDATA
DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
logging
Local extended management
segment space management auto
Flashback on;
create SAMPLE user identified by usrmringnew
SAMPLEDATA default tablespace
tablespace temporary temp;
Import from 9 to 10r2
IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
Unfortunately, it gives the error
ORA-01658: unable to create the measure INITIAL segment in tablespace
could someone kindly help me on this?
Thank you very much!
Hello
As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.
Solution - you can use one of following:
1. move the data file to a point of editing with sufficient space.
2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.
Published by: sanjayIndia on October 8, 2008 09:02
Tags: Database
Similar Questions
-
IAM on the oracle 8.1.7.0.0 version
Asked me to reduce the scope for a (table) segment in a tablespace.
I tried with the option
ALTER table < table name > move;
but I get the error as
ORA-01658: cannot create as INITIAL segment in tablespace SBDAT01
I tried to merge the tablespace and also there is enough free space to contain the segment in tablespace
Please tell me how to avoid the mistake and to reduce the number of extensions for the specified segment table?
Thank you
AramPL don't post duplicates - reduce extensions - to continue the discussion in your original thread
-
Hi, I need to deploy a VM of *.ova in my cluster with 5.1 ESXi hosts u2 (1900470), but when I try to run it I get this error:
Unable to start the virtual machine.
Power DevicePowerOn module has failed.
Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/51e7fc6b-85806744-fb38-0021286bb22a/xxx.vmdk'
Unable to create the virtual device. Stack 16 or 255 sectors per track is not supported.
The same deployment works in another cluster with 5.1 ESXi hosts (700733) and on my vmware workstation 10.
I have tryied compatibility material upgrade\downgrade with wmware workstation and download directly to my host but still do not
I formatted the hard drive hard by ssh and readded to the inventory, I tried to convert vm to work cluster... nothing to see...
Any suggestions? Thank you
Solved! I don't know why but the import of virtual machines with 5.1u2 ESXi, heads, and sectors in *.vmdk file are reversed:
BEFORE:
ddb.geometry.biosHeads = "16".
ddb.geometry.biosSectors = "255".
DDB. Geometry.Heads = "16".
DDB. Geometry.sectors = "255".
AFTER:
ddb.geometry.biosHeads = "255".
ddb.geometry.biosSectors = "16".
DDB. Geometry.Heads = "255".
DDB. Geometry.sectors = "16".
Connect to a host with SSH and editing *.vmdk file with VI will be the virtual machine starts without problems!
-
I get an error 643 since April and unable to install an important update. I tried to download the update, but your instructions on the Web are very confused. It's the only update that gave me problems. Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://support.Microsoft.com/kb/KB976982
You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/971058
How to reset the Windows Update components?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not solve the problem, repost in the appropriate Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
Got the unable to create the specified taskHello
What is the exact error message received when the problem occurs?
Methood 1:
Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.Method 3:
You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:
http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps! Let us know if you need more assistance.
-
Unable to create the new project for the new society without existing systems
I'm unable to create a new project for a new society. There is no existing systems, and I can't go beyond the selection screen. I first put in place a new collector, registration of the database and start collections? Or y at - there a step I'm missing?
I found my problem. I've been using Firefox. This works fine in IE. Problem solved.
-
ORA-39070: unable to open the log file, while using expdp
Hello
Please notice why I get ORA-39070: unable to open the log file.
When you run the expdp against the default directory: the expdp DATA_PUMP_DIR is completed successfully.
-current direcory on the Linux file system:
-Create directory and grant of read/write on it$ pwd /log_files/oracle/cdl1
-Verify the existence of the directory:$ sqlplus sys/xxxx@cdl as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Wed Feb 22 16:36:01 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> create or replace directory EXPTEMPDIR as '/log_files/oracle/cdl1'; Directory created. SQL> grant read,write on directory EXPTEMPDIR to system; Grant succeeded.
Check for permission to write to the directory:QL> select * from dba_directories; OWNER DIRECTORY_ DIRECTORY_PATH ---------- ---------- -------------------------------------------------- ... SYS EXPTEMPDIR /log_files/oracle/cdl1 ...
-try to expdp:[/log_files/oracle/cdl1]$ touch 1 [/log_files/oracle/cdl1]$ ls -l total 0 -rw-r--r-- 1 oracle oinstall 0 Feb 22 16:38 1
expdp system/xxxx@cdl FULL=y DIRECTORY=EXPTEMPDIR dumpfile=expfull220212.dmp Export: Release 11.2.0.3.0 - Production on Wed Feb 22 16:38:33 2012 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ORA-39002: invalid operation ORA-39070: Unable to open the log file. <<<<<<<<======= ORA-29283: invalid file operation ORA-06512: at "SYS.UTL_FILE", line 536 ORA-29283: invalid file operation
Post pl OS details - it's an RAC instance?
Error ORA-39002 ORA-39070 ORA-29283 ORA-6512 when you use Export DataPump (EXPDP) [ID 1305166.1]
Export DataPump (EXPDP) triggers errors ORA-39002 ORA-39070 ORA-29283 ORA-6512 on RAC Instance [1317798.1 ID]HTH
Srini -
Unable to create the virtual disk: fault. RestrictedVersion.summary
Hello
Im trying to create a virtual disk using the CLI on ESX4i. The script is:
vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk
When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary
Can someone tell me why please. Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).
The file system is THAT VMFS 3.33 maximum file size is 256 GB. The block size is 1 MB. If it is the block size that is the problem how can I easily change?
It's in a laboratory, not a production environment. I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.
Thank you.
Mike.
If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.
-Matt
VCP, vExpert, Unix Geek
-
Unable to create the dump over NFS file
Some body help me please...
I 11.2.0.1 exadata Server database version...
I use expdp to export a table via NFS... but couldn't... Strange thing is that it creates the file in the directory, but not the dump file...
ORA-39000: bad dump file specification
ORA-31641: failed to create the dump file ' / var/opt/nfs/test.dmp '.
ORA-27054: file system NFS where the file is created or he resides is not mounted with the correct options
Additional information: 3
my mount options:
nfsstat m
/ var/opt/NFS
RW, worms = 3, rsize = 32768, wsize = 32768, hard, proto = tcp, timeo = 600, TRANS = 2, s = sys, addr
Any suggestion?
Published by: user12549504 on May 7, 2011 04:58Please check this document Metalink/MOS:
ORA-39000 ORA-31640 and Ora-27054 errors to call Data Import pump [ID 739570.1]
-
ORA-01653: unable to extend the table SYS. ARGUMENT$ 13 in the SYSTEM tablespace
I created the new database manually.
When I @?/rdbms/admin/catproc.sql put this sql to execute.
for some time he said created, granted. but after somewhere, it gives me the error.
ORA-01653: unable to extend the table SYS. ARGUMENT$ 13 in the SYSTEM tablespace
Please help me on this.
Thank you in advance.Your query does not tablespace SYSTEM size. It provides a list of tablespaces. And may not be a complete list because I can't UNDO and TEMP tablespace. In all cases, based on the output, you have not created a user storage space, so all the tables you create in SYSTEM tablespace and finally you ran out of space. You need create user storage space if you don't have any. You want to change the non-system and non-system tablespaces value default tablespace users. Even if you don't have a non-system tablespaces, tables will be created in the tablespace default user unless you explicitly specify one. You must move the tables/indexes existing user for the non-system tablespaces.
SY.
PS to get the size of the SYSTEM tablespace, you will need to run:
Select sum (bytes) / 1024/1024 tablespace_size_in_mb
from dba_data_files
where nom_tablespace = 'SYSTEM '. -
R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file
Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
AC-00002: error: unable to create the log file
The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
Treatment services are enabled.
However, when installing on the application additional node the rapidwiz is errors
"AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
$INST_TOP/$CONTEXT_NAME/logs/12202114.log
I tried to install several times but every time it failed with the same message
I think that the reason for the failure:
I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
I checked this by pressing a file being logged in as root:
-rw - r - r - 1 person person 0 20 Dec 10:59 abc
I mounted node2 successfully using
Mount-t nfs nas1: / erparch /erparch
Rapidwiz version is 12.0.0.20
What are the steps to take in order to proceed with the installation on the second node.user10126380 wrote:
I think that the reason for the failure:I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
I checked this by pressing a file being logged in as root:-rw - r - r - 1 person person 0 20 Dec 10:59 abc
I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.
Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.
These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.
Kind regards
John P.
http://only4left.jpiwowar.comPublished by: jpiwowar on December 21, 2009 21:38
-
ORA-19506: failed to create the file for sequential access
Hello, log backup archive My RMAN is a failure... Here is the info from the full log file. Can someone please shed some light on this...
Recovery Manager: release 10.2.0.3.0 - Production on the game 17 Dec 09:00:02 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN >
connected to target database: INVENT (DBID = 12345667)
RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 >
using the control file of the target instead of recovery catalog database
allocated channel: t1
channel t1: sid = 959 devtype = SBT_TAPE
channel t1: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
allocated channel: t2
channel t2: sid = 962 devtype = SBT_TAPE
channel t2: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
executing command: SET ORDER ID
SQL statement: alter system archive log current
From backup 17 December 09
Current archived log
channel t1: from archive newspaper backupset
channel t1: specification of archive log backup set
archive log entry thread = 1 = recid 61859 46634 = 705760770 stamp = sequence
archive log entry thread = 1 sequence = recid 61860 = 46635 = 705762477 stamp
archive log entry thread = 1 = recid 61861 46636 = 705765886 stamp = sequence
archive log entry thread = 1 = recid 61862 46637 = 705767598 stamp = sequence
archive log entry thread = 1 sequence = 61863 recid = stamp 46638 = 705769235
archive log entry thread = 1 sequence = 61864 recid = 46639 stamp = 705769236
archive log entry thread = 1 = recid 61865 46640 = 705773535 stamp = sequence
channel t1: starting piece 1 to 17 December 09
channel t2: from archive newspaper backupset
channel t2: specification of archive log backup set
archive log entry thread = 1 sequence 61866 recid = 46641 = 705774395 stamp =
archive log entry thread = 1 = recid 61867 46642 = 705775744 stamp = sequence
archive log entry thread = 1 = recid 61868 46643 = 705776075 stamp = sequence
archive log entry thread = 1 = recid 61869 46644 = 705783627 stamp = sequence
archive log entry thread = 1 = recid 61870 46645 = 705783628 stamp = sequence
archive log entry thread = 1 = recid 61871 46646 = 705787215 stamp = sequence
archive log entry thread = 1 sequence = recid 61872 stamp 46647-= 705787215 =
archive log entry thread = 1 = recid 61873 46648 = 705804999 stamp = sequence
archive log entry thread = 1 sequence = 61874 recid = stamp 46649 = 705834020
channel t2: from room 1 to 17 December 09
RMAN-03009: failure of the backup command on channel t2 at 2009-12-17 09:01:38
«"ORA-19506: failed to create the batch file, name ="7bl14b16_1_1", parms ="»
ORA-27028: skgfqcre: sbtbackup returned the error
ORA-19511: error received from layer media manager, error text:
VxBSACreateObject: Failed with the error:
Server status: could not allocate new media for backup, storage unit has no available
T2 channel disabled, job failed on it will run on another channel
output channel: t1
output channel: t2
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on channel t1 at 2009-12-17 09:02:43
«"ORA-19506: failed to create the batch file, name ="7al14b16_1_1", parms ="»
ORA-27028: skgfqcre: sbtbackup returned the error
ORA-19511: error received from layer media manager, error text:
VxBSACreateObject: Failed with the error:
Server status: could not allocate new media for backup, storage unit has no available
RMAN >
Complete recovery manager.It's all about media layer. You may need to ask Veritas netbackup admin to fix the problem and resubmit the backup after that.
-
ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
Log queue alerts
Fri Jul 31 06:10:08 2009
Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
ORA-27037: unable to get file status
IBM AIX RISC System/6000 error: 2: no such file or directory
Additional information: 9
Fri Jul 31 06:10:08 2009
Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
ORA-27037: unable to get file status
IBM AIX RISC System/6000 error: 2: no such file or directory
Additional information: 9
Fri Jul 31 06:10:08 2009
Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
ARCH: Stopped archiving, error occurred. Will continue to retry
Fri Jul 31 06:10:08 2009
ORACLE Instance gdwp - archive error
Fri Jul 31 06:10:08 2009
ORA-16038: log 1 # 18207 sequence can be archived
ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
Fri Jul 31 06:10:08 2009
Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
ORA-16038: log 1 # 18207 sequence can be archived
ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
Fri Jul 31 06:10:11 2009
ARCH: Stopped archiving, error occurred. Will continue to retry
Fri Jul 31 06:10:11 2009
ORACLE Instance gdwp - archive error
Fri Jul 31 06:10:11 2009
ORA-16014: log 1 sequence # 18207 not archived, no available destinationsDBA2008 wrote:
Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.
HTH
Aman... -
When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.
I need helpKind regardsThank you very much!
To host successfully a FSX session what follows is the key enabling
my client (s) to join my host FSX session!
"Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."
6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...
Only a single router in my configuration of the DMZ, the external network to the router,
in this case, the 2 wires, had defined port forwarding.
Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.
5 high to the author!
-
When I try to open the application in the administrator account it say - could not save the settings: unable to create a configuration file for the required configuration object
Thanks for the reply.i think that a virus changed I scan my computer and discovered C:\users\jason\AppData\local\temp\low\temporary internet files\content. IE5\TLIFXGRH\ why is Task Manager disabled people [1]
Maybe you are looking for
-
cannot drag and drop bookmarks in FF12
I just upgraded to 12.0 FF, and I find that I cannot drag and drop bookmarks in the window "show all bookmarks". I used to organize my favorites in this way, order them, put in folders, etc. I can remove bookmarks and I can even 'copy' and 'paste' to
-
HP PHOTOSMART 6520e-all-in-one: Photosmart 6520 stopped printing.
Printer was working fine, after that I updated the driver for Windows 10, then just stopped printing, error communicate is not with the printer, but the status of the printers is connectivity is ready, State of the network again on the computer it sa
-
I used to be able to open links, but it has suddenly stopped working.
-
How to access a particular element in a table 1 d... ??
Thanks in advance
-
How to change the acquisition on GigE Camera settings in VBAI
I have a line scan application where I need to control the rate of the line depending on the speed of the machine. I use Vision Builder (Vbai) 2009 and I have Labview, but not the Module's development of Vision. I use a custom Labview User Interfac