Creation of component installation media for the supply of OEM 12 c database

Similar Questions

• I lost the installation media for windows server 2012 std

  I lost the installation media for windows server std 2012, but I have the key. where I can download the media.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• Is it possible to create installation media for windows 8.1 update from version of Windows 8

  Hello

  I updated my windows 8 for windows 8.1 but after that, I don't know how to make an installation media for it, since I did not have a product key for Windows 8.1

  How to make an installation media for my windows 8.1 without product key?

  Note: There is no ISO for Windows 8.1. However, if you purchase a product key for Windows 8.1, you can create the installation media.

  Here is the link.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  http://Windows.Microsoft.com/en-AU/Windows-8/create-USB-recovery-drive

  Create a recovery USB disk

• "Clips do not have enough media for the transition?

  I have two clips between which I want to insert a cross fade.  The first clip is 19 seconds long, the second is 16 seconds.

  When I try to put in the transition (I did two seconds of time), I get a message saying "Clips do not have enough media for the transition."  He will accept no transition more than 0.1 seconds.

  It makes no sense to me.  There are a lot of media for the transition time.  Can someone find out who's the problem and a possible solution?  Thank you.

  If it's important, the first clip is a mp4 video, and the second is a jpg photo.

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• Is a Wireless Optical Mouse 5000 a plug-in replacement for the supplied mouse as part an integral of the Wireless optical Desktop Pro?

  Hello

  Question title:

  Is a Wireless Optical Mouse 5000 a plug-in replacement for the supplied mouse as part an integral of the Wireless optical Desktop Pro?

  I have spoecifically need to know if it has exactly the same features of the IntelliPoint and know if it will work with the transmitter/receiver provided with the Optical Desktop Pro wireless.  I know that the OM 5000 is provided with its own transmitter/receiver, but I don't want to have more than one on my desk.

  Thank you

  Boo

  Hope this information is useful.

  
  

  Well it is obviously not useful to say that you do not know!

  Let me know if it worked.

  For someone else who has a problem with the IntelliMouse provided as part of the Wireless Optical Desktop Pro (which is a Wireless Intellimouse Ex plorer 2.0 is told by the way), then they may be interested to know that the Wireless Optical Mouse 5000 works very well with the dongle WODP although the pointer speed necessary to decline slightly with one I had.

  Mike

• Table for the code for method of payment for the suppliers site

  Hi all, does anyone knows how to get the value for the code for method of payment for the suppliers site in R12.1.3? I don't speak from that in the following path: 1 Paybles responsibility 2. Suppliers 3. Request for a 4 suppliers. Click on details of payment 5. Scroll to supplier Sites and press the update button 6. Note that, for example among the payment methods is checked as default thanks in advance, A.Stoynaov

  Hello

  Please check this note that contains the query:

  Default values for method of payment for providers at the level of the Table (Doc ID 737128.1)

  You can use this query to view the lines for a given provider site:

  SELECT *.

  Of iby_ext_party_pmt_mthds IEPPM

  WHERE IEPPM.ext_pmt_party_id IN

  (SELECT IEP.ext_payee_id

  Of iby_external_payees_all IEP

  WHERE IEP.supplier_site_id IN

  (SELECT APSS.vendor_site_id

  Of ap_supplier_sites_all of the PSA, ap_suppliers APS

  WHERE APS.vendor_id = APSS.vendor_id

  AND APS.vendor_name = '. '

  AND APSS.vendor_site_code = ''));

  Concerning

  Joel Purswani

  Support of Oracle

• How can I specify the installation directory for the packages installed on Windows clients?

  This article (Creative Cloud help |) Create or modify packages) mentions that you must specify the installation location on the command line in Windows for CC packages:

  
  

  Installation location

  The Application Manager offers you the following options for the deployment location:

  • Deploy to the default directory of the application: The default player is system unit; the default path is \Program Files in Windows/applications under Mac OS.
  • Directory to specify when the deployment: Allows users to end to specify the installation path when the package is deployed. On Mac OS, users are invited on the user interface, while on Windows, it's a command-line only option.
  • Specify directory: enter the path to the location to a specific installation location

  I have chosen "Specify the directory for the deployment" when I built the package.  I also added parameters for deployeur batch of Exceptions (Creative Cloud help |) Using Adobe deployeur Exceptions) indicating the installation location for the exceptions.

  How to access the command line options during install?

  • I tried setup.exe /?, and setup.exe -?, and the installation continues straight on the pilot of c: (small SSD drive; need to install on the 1 TB SATA drive on the HP workstation).
  • I looked for the MSI command line options, and there is not to change the installation location.

  There is a post somewhere that explains it?  I had no luck with my research in the forums on the web.

  When the "Specify the deployment directory" configuration is selected then you may need to use a deployment tool to deploy this package and need to call for the installation .msi.

  I hope that under Microsoft section can help. It has all the command line to install msi.

  http://TechNet.Microsoft.com/en-us/library/cc759262%28WS.10%29.aspx#BKMK_SetLogging

  Thank you

  Ashish

• installation media containing the drivers for windows 7

  How to download drivers installation for windows media 7? When I try to install windows 7 and I am trying to load the drivers, I get a message telling me to install drivers from media to load windows 7.

  This option driver support is for when you need to install the drivers of third party controller, for example sata control, so that the installation can see the drive.

  If your PC or motherboard if generic PC, supports win7 its useually not necessary need to install third-party drivers.

  You need to tell us what you're trying to install win7, hardware and if it is a new construction.

• Can I create the installation media for Windows 8 operating system Windows 8?

  I encountered some problems with the installation of the Windows 8 client that I expect to be too long to attempt to repair. I suggested to the client that the operating system will simply be reinstalled. The customer has no recovery media. I have not found any recovery partition. I found the instructions at http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only to create the installation media, but it takes that I create the media from the computer on which I wish to install Windows 8. This computer came with Windows preloaded 8 factory.

  So I can use this computer to create the installation media, and then reformat the hard drive and reinstall windows 8?

  There is no method to create the installation media (the original installation media does not exist).  The computer maker several times will include a program to help create your own recovery media, but which varies from one company to the other.  You could contact them to ask if you don't see the program, or they can also send you a copy (Dell sent me a free CD by fed - ex overnight when I asked for one for a Dell Latitude Laptop - laptop I has not yet bought them even!)

• Need to create an installation media for Windows 8 (not 8.1)

  I recently had need to reinstall Windows 8.1 due to a crash problem. I am now stuck because of the key, I bought and that a Microsoft tech I had a chat session with said use the button install Windows 8 on the following page:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Well, it doesn't work and think that I have no internet connection then further down the same page is a link to create the installation media if you get this message but isn't only for 8.1 8. My key does not work on a clean install of Windows 8.1, which I already have a DVD. When I came across this problem, a comment I found said to use a generic key because the installation will not continue. Well, it worked, but when I tried to activate Windows with my purchased key, he acknowledged, because apparently my installation media was just 8.1 and not Pro that I bought. I asked the tech if I could use the web page above to reinstall Windows again and he said yes, but make sure you use Windows 8.

  I saw the link above referenced in many places on this forum for people who want to install 8 don't not 8.1, but it leads to the same place, and when you launch mediacreationtool.exe, there are only options for 8.1.

  I've been going round in circles on links to Microsoft, but the creation of the only available media seems to be to 8.1. Where can I download the installation for Windows 8 only media?

  It shows how to use a WIndows 8 key to activate a Windows Installer Clean 8.1 in stage 4 information box in the blue link.

• 0xc0000225 error code - request installation media for Windows 8

  I recently got an Inspiron 15R SE 7520 with pre-installed Windows 8. It has a huge 1 TB hard drive, I decided to divide it into three easier to manage partitions and proceeded to do so using EaseUS Partition Master. When you restart the system, I got the following error message:

  Recovery

  Your PC needs to be repaired

  A required device is not connected or is not accessible.

  Error code: 0xc0000225

  You will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the PC manufacturer

  Press Enter to try again

  Press F8 for startup parameters

  Press ESC for UEFI firmware settings

  1. you press on enter. Nothing happens

  2. press F8. Managed to find the option "restore factory settings". Saved and restarted. Nothing happens.

  3 press Esc. Ran the system diagnostics and a few hours later, the result is that everything is fine. Restarted and I'm back to the blue screen with the first message.

  I googled this problem, and all the proposed solutions begin by booting from the Windows installation CD/DVD and run a command at the command prompt. But:

  I don't have any medium of installation of Windows and I can't go to the command prompt.

  I not create recovery discs.

  And the recovery on the hard drive partition does not work.

  My request:

  I obviously need an installation of Windows 8 media. How can I get? I contacted the store where I got the laptop, but they are not you answer, and the application form, I found online does not work for the United Kingdom.

  A final update on this issue:

  I got the DVD of the shop where I got my laptop since. But I couldn't boot from the DVD automatically.  in order to boot from the DVD, I followed the instructions here: http://www.ifixit.com/Answers/View/110162/Add+Boot+Option+using+Insydeh20+setup+utility

  After booting from the DVD, I got to the command prompt, and then run the commands like here: http://itsolutionsblog.net/solution-to-your-pc-needs-to-be-repaired/

  ! BUT! The last command line does not. It must be

  BCDboot c:\Windows /s /f UEFI z:

  without the : after the f. And then, there is a confirmation message that the boot files have been created

  And then my cell phone was able to start normally.

• Installation Guide for the Patch CSCur04820 (Bash vulnerability)

  Dear community,

  is there a documentation for the installation of the hotfix CSCur04820 on first Collaboration insurance 10.5.1? In the sections of software downloads, there is no supplied readme file.

  Your answers are greatly appreciated.

  Best regards

  Igor

   Procedure to upgrade Bash Shell rpm 1) SSH to PCA Server and goto /tmp directory (ssh -p 26 root@) 2) Download the attached bash-3.2-33.el5_11.4.x86_64.rpm file to /tmp directory in Prime Collaboration Assurance(PCA) server. 3) Run "rpm -Uvh bash-3.2-33.el5_11.4.x86_64.rpm" to upgrade the Bash shell 4) Goto /opt/emms/emsam directory (cd /opt/emms/emsam) 5) Run "bin/cpcmcontrol.sh stop" to stop Prime Collaboration Processes. 6) Run "reboot" command to reboot the VM. 7) Once VM is rebooted and all the Processes are UP, you can continue to use the Server.

  You can run this command before and after to make sure it's installed:

   rpm -qa | grep bash

• Windows 8 media for the second computer upgrade

  Hello

  I purchased 2 licenses to upgrade for Windows 8, and during the initial purchase is a media (DVD burned a DVD) and used the same for a clean install. Now, I want to know if I can use the same media to upgrade my second computer or should I download the installation media once more.

  Kind regards

  REDA

  If the upgrade version is the same and you have two keys, you can use the same media