cRIO and smart camera working simultaneously

Similar Questions

• Qosmio X 505: cannot get HDMI and VGA to work simultaneously

  I've had this laptop for a year this Christmas I got two monitors and they are the two acers. And I have a vga and hdmi output, so I thought he would become double monitors but it didn't.

  I really want to work onle the vga works. Please help if this doesn't work then I'll never buy a toshiba again FOR a GAME at all. HELP PLZ

  It's a monitor 23 inch.
  It works fine on my 42 inch flat screen hdmi in my room
  but it wont work on my monitor.

  Any help would be good please and ty

  Recommend checking this Toshiba document.

  + * Is it possible to use two external monitors on a Qosmio X 500? * +
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  Yes, it is possible.
  Plug the VGA and HDMI monitor on the associated connectors. Now you can use the FN + F5 key combination to activate the two monitors.
  Choose 'HDMI + CRT Extended Desktop ". The internal display will spend.

  Note: All three screens (two external and one internal) can not be activated at the same time.

• Link crio smart camera

  Hello

  I want to use my smart camera 1744 just to manage the acquisition and the Crio-9023 to manage the entire treatment. Problem is that I have 1 ethernet port on my PC. I used a hub to connect both Crio and smart cam, but I can't connect and run these two VI with my ethernet hub simulatous.

  • Is there another way to connect them, as to connect the smart camera for the crio instead of the hub? If Yes, what is the procedure step by step?
  • Or how I can acquire images of the smart camera as if it were just a regular ip camera?

  Thankz in advance?

  OK thanks I found the problem - the ethernet hub that I used was old and may only support 10 MB/s instead of 10/100. So that's why I was getting crashes and why I wasn't able to connect to these two devices simulateously.

  Thanks for your help

  Kind regards

  Ritesh

• Cam works is not on asus zenfone5 Skype call

  Hi, I use asus zenfone5 for Skype call. It was working fine before. But after that I've updated asus and also set to update of Skype... my cam system not appear each time I call. Anyone has information on this subject?

  Tonight I tried to use Skype call, and the camera worked well do not know what happened things but right back to normal.

• Error of flow OR MAX and attribute camera out of reach

  I recently bought a camera Point Grey Grasshopper3, it seems to work fine at point software fly Cap Gris provides, but I get an error NI Max when I try to do a simple puncture (see below). This error appears every time I try to catch a time image the first after the opening OR MAX, even if the flow is set to maximum. Then I change the flow under control of the unit to any integer 125000000 max, and the camera works very well for MAX. It will capture images as much as I need. Then I save the camera output MAX, open MAX once again, it shows my saved settings, I'm going to capture images and I get the error again. If I change the range regardless of the number and it works again in the same session in MAX.

  I had a gray point Zebra2 work very well and he used in my program LabVIEW with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns error attribute camera out of reach of the VI camera configuration. I use to test the camera of the VI is the camera just to open, configure acquisition, start acquiring, get the picture, cancel the acquisition and nearby IMAQdx camera configuration. I did twice open MAX, change the flow, save the camera, close MAX without grasping an image and then was able to acquire images in LabVIEW in the first inning. I would run the VI once again and then it returns the error to attribute camera out of reach. I changed the packet size, resolution and the frame rate of the camera with a difference in errors.

  Since I am able to images of the stream from the camera to the gray point fly capture and Max after activating/deactivating the flow layout, it leads me to believe there is some sort of error MAX/LabVIEW that prevent me to capture the images.

  Any ideas? Has anyone else had this problem with MAX and LV?

  Looks like the point Grey cameras showed this error before the firmware on the basis. See this linkfor such a forum. I would monitor the camera (*.icd) file located in the data folder IMAQdx in public Documents to see if the actual value is be replaced after the configuration of the camera has been saved in MAX. There is a chance that the GigE. XML file which is transferred from the camera is overwrite these values in the unacceptable value. See this linkfor a KB about this error, which leads me to believe that this may be the problem.

• Camera work not-900 Elitepad

  Hello

  I'm having a problem with the camera on my 900 Elitepad. When I open the camera in win8.1 application, I get the following error:

  

  I tried to install all new updates on the HP support site, with no luck. The camera is present in my device manager without error. However, the geosensor comes with an error, don't know if this could be somehow connected because of the geotagging feature. I tried to uninstall the Broadcom driver and using the latest HP support, but without success.

  

  I hope someone can help! :-)

  I already tried the driver pack, without success. However, I managed to get it working again this weekend. I installed a Media Feature Pack for N/KN Win8.1 MS, after a reboot the cam was working. However, the image had a green cast and doesn't seem to be able to concentrate or to expose properly. I checked the driver, but the HP driver pack sp64292.exe. I found an update for Lenovo for the same sensor of the camera, with a more recent version number. Installed, and the cam worked perfectly :-)

• selection by tcp/ip and labview 1742 smart camera inspection

  Hello everyone!

  I m working with two smart cameras NI1742 where I have an inspection for various products, I m try via tcp/ip and view lab 2010 select inspection for each product. I configured the tcp/ip connection and test it with the vision builder ethernet Terminal, this part works fine, but I can´t do this with Labview where I show images of smart cameras via shared variables.

  If anyone knows how I can do? Please, I will be grateful.

  It's my code, but there is something that's not going to.

  Thanks and greetings

  Hello! Brad

  Thank you, you have all the reason, I ve tested and works but also I need to send a command to run the selected control, isn´t it?

  Yes, you´re great Brad, now I have to just organize all my code, thank you very much.

  Greetings from the Mexico

• When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  When I updated my iPhone 6 more iOS 9.3 my camera will not be to the point and seems blurred by far. I already reset my iPhone and my mother worked... Anything other ideas, might be a bug in the iOS update?

  I would say "try and do a restore as new iPhone" like everyone else but I'm having a similar problem and nothing works! I've restored all the possible ways and nothing. I got my screen replaced and I still have the same home button but my phone updated with error 53 (makes the phone unusable) but the camera did work before the update. and Apple has released iOS 9.1.2 (13D 20) to correct the error 53 (mainly for other reasons) but when I go to use the camera, it is only black! If someone could help 'discovered' and I would be great!

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• 10.9.5 security Update 2015-008 installed yesterday and the camera does not work

  Hello

  Updated with security update 2015-008 yesterday on 10.9.5 and iMac 27 (end of 2013 - iMac14, 2 Intel Core i7 3.5 GHz) camera (UVC camera VendorID_1452 ProductID_34065) no longer works in Skype, FaceTime, or photo booth...

  It is most annoying. Thank you for advice or guidance.

  Tarkan

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• I'll try to find the distance between a smart camera and object?

  I am using smart camera or 1722, and I'm doing a VI that gives me the distance between the object and the camera of the aquised of the image with the grab module

  Can someone help me please?

  I'm new with labview and I don't have much time to make this project so please help

  You should pass on the IP Reset (on the camera), and then you will be able to make the assignment of intellectual property to a successful conclusion.

  Kind regards

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• applock and smart app lock does not work on 5.1.1

  Hello. I just upgraded to 5.1.1

  But applock and smart app lock does not work more that is very important to me.

  Who else has experienced the same problem? If you know a solution, let me know pleasr. Thank you

  @avacs

  It's a new update, application developers must check and fix this compatibility problems, not Sony. If the application has been developed by Sony, Sony should fix the problem.

• temporarily, the computer freezes and buzzes then restarts then simultaneously using spider solitaire and play itunes worked fine util is about 2 weeks.

  Fix a computer temporarily freezes and buzzes, then restarts when simultaneously using spider solitaire and playing itunes worked fine util is about 2 weeks. Dell vostro, windows 7, office 10, itunes 10.6.3

  Help!

  Hello

  1 done only if you use iTunes and solitaire spider together?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall ITunes and see if this is useful:

   

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Method 2:  Put the computer in a clean boot state and see if that helps.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: Restore the computer to a date when it was working fine before.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• I've upgraded to windows 7 and can't get my motion eye camera work

  I've upgraded to windows 7 and can't get my motion eye camera work

  Go to the Sony website and find your model of PC in the support section. Now download the Windows 7 drivers for the camera (assuming they exist) and then install the drivers.