cRIO: error when compiling an application in real time

Similar Questions

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Errors when compiling the package

  Dear members,
  
  IAM after the standard user manual and try to create a few pacakages. When Iam compile the package Iam getting some errors which are as follows:
  
  My Pacakage:_
  
  PACKAGE 'XXARUN_EMP_FETCHER' AS
  FUNCTION XXARUN_GET_EMP(EMP_NO IN NUMBER) RETURN SHEIKYERBOUTI.
  END;
  
  Errors when compiling the above package_
  
  
  Error (2.1): PL/SQL: statement ignored
  Error (2.50): PLS-00201: identifier 'SheikYerbouti' must be declared
  
  
  _ My Package body
  
  PACKAGE BODY 'XXARUN_EMP_FETCHER' AS
  FUNCTION XXARUN_GET_EMP (EMP_NO IN NUMBER) OF RETURN IS
  
  EMP_FOUND EMPLOYEES % ROWTYPE;
  EMP_RTN SHEIKYERBOUTI.
  BEGIN
  SELECT *.
  IN EMP_FOUND
  EMPLOYEES
  WHERE EMPLOYED. EMPLOYEE_ID = EMP_NO;
  EMP_RTN: = SHEIKYERBOUTI
  *(*
  EMP_FOUND. EMPLOYE_ID,
  EMP_FOUND. LAST_NAME,
  EMP_FOUND. JOB_ID,
  EMP_FOUND. MANAGER_ID,
  EMP_FOUND. HIRE_DATE,
  EMP_FOUND. SALARY,
  EMP_FOUND.COMMISSION_PCT,
  EMP_FOUND. DEPARTMENT_ID
  *);*
  
  
  RETURN EMP_RTN;
  
  
  END;
  
  END;
  
  
  Compilation of erros when the Package body above_
  
  Error: PL/SQL: analysis of completed Compilation unit
  Error (1.26): PLS-00905: object HTEST. XXARUN_EMP_FETCHER is not valid
  Error (1.26): PLS-00304: impossible to compile 'XXARUN_EMP_FETCHER' body without its specification
  
  Please help me to solve the above problems.
  
  Thanks in advance.
  
  Best regards
  Arun Reddy.
  
  Published by: A4S on July 20, 2009 10:10

  Hello

  in
  PACKAGE 'XXARUN_EMP_FETCHER' AS
  FUNCTION XXARUN_GET_EMP(EMP_NO IN NUMBER) RETURN SHEIKYERBOUTI.
  END;

  SheikYerbouti must be declared as a type

  Kind regards

  Branislav

• Error when compiling form 6i

  Hi all
  
  I get the error memory during the compilation of the form.
  I tried with two commands.
  
  I run these commands starting at $AU_TOP/forms/US
  
  Initially, I tried with
  
  f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
  and I got following error
  
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  With partitioning, OLAP and Oracle Data Mining options
  Release 9.2.0.8.0 - Production jserver
  PL/SQL Version 8.0.6.3.0 (Production)
  Oracle V6.0.8.21.0 Build #0 - Production procedure generator
  Oracle virtual graphics system Version 6.0.5.39.0 (Production)
  Oracle Multimedia Version 6.0.8.25.0 (Production)
  Oracle tools integration Version 6.0.8.17.0 (Production)
  Common tools Oracle zone Version 6.0.5.32.0
  The basic Oracle 4.0.6.0.0 - Production version
  Compilation of specifications package APP_CUSTOM...
  No compilation errors.
  
  Compilation of the package APP_CUSTOM body...
  Fault memory
  --------------------------------------------------------------------------------------------
  
  Secondly, I tried with
  f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid = apps/opopop123 Module_Type = batch FORM = yes Output_File = XXTEST.fmx
  Now the error has come was only "for lack of memory" without any other messages.
  
  Please you all a peek inside.

  Do you get the same error when you use the following command?

  module f60gen $ =.

  . FMB userid = APPS / output_file =.FMX module_type = form batch = yes compile_all = special

  Do you get the same error when compiling any other form? If so, please repeat the links adadmin f60gen, make sure that it succeeds and then run the same command again.

• Deploy an application in real time

  Hello, I want to create an application to deploy the application in real time (previously compiled) in a Compact RIO goal. My goal: a standard user could deploy the new application without LabVIEW Real-time... Will he something exists? Thank you

  Hello again,

  Even if you don't have a USB port, I posted the link because there are screws that could possibly be used.

  I also found that you can use the example of "Browser FTP" VI in order to copy files to your cRIO. The next step is to create an executable from this example.

  Kind regards

• ICE30 errors when compiling a WiX project and including the mstudiocommon.2010.msm

  Hello

  I am trying to create an msi using WiX for a project using the mergw VISA modules that come with VISA 5.3, that I installed it under the IEEE 488.2 package. mstudiovisa.2010.msm requires mstudiocommon.2010.msm. When I include them in the project file (.wxs). the compiler produces errors such as below (partial list)...

  I only get errors when using MSM in a Visual Studio installed the project.

  Any suggestions for a fix would be greatly appreciated.

  Thank you

  David

  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.

  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 1.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__016BDF7D90874798B4BE0BDA0C05A49A.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 2.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__2E0318AAB2BF4B7189A8CF21FD7185BC.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 5.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 5.CON | NationalInstruments.NiLmClientDLL.config' is installed by two different components on a LFN system in "[TARGETDIR] \Visa Tester\ ': 'C__46B6CB4FBD354C73B7A67EE8D9DA4361.039160C5A7A24C49AD122694436A47BB' and 'C__63DA4DFA08B847EBBE9EA67DDFA881CD.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 6.CON | NationalInstruments.Common.config "is installed by two different components on a LFN system in" [TARGETDIR] \Visa Tester\ ': 'C__4DCFB2C5FC44400BA4B4CA245390C113.039160C5A7A24C49AD122694436A47BB' and 'C__78B0A59F2E584CB48B2993A61B055DC3.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 6.CON | NationalInstruments.Common.config "is installed by two different components on a LFN system in" [TARGETDIR] \Visa Tester\ ': 'C__4DCFB2C5FC44400BA4B4CA245390C113.039160C5A7A24C49AD122694436A47BB' and 'C__78B0A59F2E584CB48B2993A61B055DC3.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.
  Light.exe (0,0): LGHT0204 error: ICE30: the target file ' NATION ~ 6.CON | NationalInstruments.Common.config "is installed by two different components on a LFN system in" [TARGETDIR] \Visa Tester\ ': 'C__4DCFB2C5FC44400BA4B4CA245390C113.039160C5A7A24C49AD122694436A47BB' and 'C__84BBDA9D53784C71992935FBA4FA4021.039160C5A7A24C49AD122694436A47BB '. This breaks the reference of the component count.

  Hi David,

  The WiX project example that I'm talking about is installed by Measurement Studio to "C:\Users\Public\Documents\National Instruments\MStudioVS2012\DotNET\Examples\Application\Deployment\WiX\All Libraries". However, this example only supports Measurement Studio libraries. We are finalizing some examples that support the material libraries, 488.2 and VISA, DAQmx. I'll post a link these here when they are published. But in the meantime, I have attached the current version of the examples that are close to final.

  For the dependencies required for a distribution list, you can consult the help topic of Studio measure measure Studio Modules merger and deployment files.

• error when compiling with jre 5.0 auditor

  Hello

  I have an application that has been developed with the JDK 6.0. It works fine on the Simulator as well as on the device.

  I need to make it compatible 5.0.

  I went to the jre 5.0 (installed with the plug-in in eclipse) and corrected all the errors of compilation (a few)

  Now I get and error when trying to package the application:

  Cannot open the C:\Users\MyUserName\eclipse_workspaces\Blacberry\AppName\bin/com.company.mobile.appname.AppNameL.crb/ dir

  Error! : error: auditor failed: C:\Eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin\preverify.exe d C:\Users\...

  Any tips?

  Thank you

  Alex

  Thank you guys for all the kinks.

  I managed to solve the problem by replacing the preverify.exe of 5.0 to 6.0.

  Might want to check this thread as well:

  http://supportforums.BlackBerry.com/T5/Java-development/problem-with-resource/TD-p/332908

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Photo not valid error when launching an application

  Hello

  When launching an application through the web browser, I get this weird error.

  Starts the RDP session, the profile starts to connect, and as username and group political stuff ends, I get a little popup with the title 'Quest vWorkspace Shell' and "invalid image" message.  At the bottom of the screen is a pnshell.cmd minimized command prompt that is sitting there until I click OK in the popup mentioned previously.  Once I click OK, then the vWorkspace application will launch successfully.

  The pnshell.cmd has the following inside:

  REM added by RMC to prevent permissions app sprinkled with admins

  c:\Windows\syswow64\Ifmember administrators

  If not ErrorLevel 1 Goto SkipAdmins

  c:\Windows\SysWOW64\pnshell.exe

  I'm on vWorkspace v8.0

  The RDSH is 2008 R2

  Any ideas why I get this error?

  Thank you!

  Nick.

  Hello Terry,

  Thanks for the reply.  We use Sophos, but I added the file C:\Windows\SysWOW64\pnshell.exe to the list anyway, restarted the TS, and it's always as problem.  I also added pnstart.exe to the list too.

  I noticed now that this happens only to a specific user.  Other users seem to be the problem... So... don't know why, but I hope it's a?  If you have any ideas why I would be eager to hear.

  Thank you

  Nick.

• Fonts missing error when compiling.

  I use the Output Designer 5.7. For presentment targets I PDF more all HP PCL5 and PCL6 most all printers Xerox PCL5, except that I removed targets Asian presentment. When I compile I get messages on the fonts of various sizes of Arial to Arial 10 pt. These messages mean that the police has been changed for all targets of presentation or just one? Is there anyway to say what targets presentment has modified fonts?

  Here is an example of a compilation of JFBatch message. A similar problem appears when compiling the GUI.

  MSG #: 100 police passed: ' Arial (W1) 8.0 PT - Regular "to:" (W1) Arial PT. 10.0 - Regular'.

  In fact, I thought that this one myself. If you compile from the user interface dialog box indicates which printer does not support the policy in question. If these printers were removed the presentation targets then the error disappears.

  In my case, the question was HP 4 L, 5 L and 6 L printers.

• Error when downloading an application of newsstand

  I get an error when downloading my zip file "in Itunes Connect, newsstand is activated for your version of the App." The Info.plist file must include UINewsstandApp = true and CFBundleIcon dictionary must be specified. WHAT? How can I do this? I use DPS and am in no way a developer or anything close to it. I did cela a free subscription, I don't know where t make this change.

  Looks like you said your application supports newsstand when you created the application in Apple iTunes connect, but when you use App Builder you have not selected "Multi problem with iTunes subscription" for the type of app on the app details page.

  Remove the kiosk of the list of the things you told Apple support you in iTunes Connect, or make a new application in App Builder and make sure it has "Multi problem with iTunes subscription", selected as the type of app.

  Neil

• Error when creating an application of FDM on SQL Server 2005

  Hello
  
  We receive this error when you create an application of FDM on SQL Server 2005
  
  
  Error: EPMCSS-07003: unable to validate identity. Invalid identity. Verify the identity. [SET_ROLES_LIST]
  
  
  We use the integration of Windows system even if we also tested with the user's.
  
  Any ideas?
  
  Thank you

  Based on the error message that seems to have a problem of Shared Services. Check that the "ADMIN" account is used for the connection of HSS and that you are using "ADMIN" to create the application and see if the same error is returned.

• Quit the Application in real time

  Is it possible to leave a real-time application of in the software (the exit() function reboots the system according to the documentation) without the system rebooting?

  Thank you

  Martin

  The only safe way to complete a CVI RT application is to return from the function RTMain. If you are very deeply nested under RTMain when you want to complete the application, and it is not practical to place battery completely upward, then an option you have is to use setjmp/longjmp functions to jump up to RTMain.

  If you do not skip a bunch of code of long jump, you must always be very careful in making sure you release/close all handles or other memory resources that your application may have acquired, before leaving. Unlike Windows, the RT process unique operating system and the process will continue to run after your application exits, so whatever you do in an invocation will persist.

  Luis

• Error-307650 during a sequence in real-time with API LV

  I created a basic real-time sequence that checks the time it takes a signal reach a certain threshold.

  

  On the side of the LV, I use the API to call this sequence. I make sure that all channels and settings are defined as in the examples. However I get 307650 error that says "NEITHER VeriStand: Index was out of range." Must be non-negative and less than the size of the collection.

  ' Parameter name: index.

  Any suggestion to help here? THX. Code is attached.

  There are two problems here:

  1. The Stimulus profile editor is not indicating that there is an error with this sequence, although there is a. Note that the variable InitialTime is used in an expression, but is not declared as a parameter or a local variable.

  2. you get an error at runtime because of it, but it's not terribly useful (index out of range).

  You can fix this by adding a local variable of InitialTime to your sequence. I dropped the CAR 338386 about this bug.

  Once you do this, there is something extra, you will need to set in your VI which runs the sequence so he could get the results of the sequence properly. You use correctly the value of the sequence name to read the back of the sequence Variable. You use the Session name used during the deployment of the sequence. Which does not match the name sequence.

  To get the name of the sequence, use VI to get all the names sequence on your session profile of stimulus to get the array of names for all of the top level of the session sequences, then index on the first point, given that you only use a single sequence. Example below:

  

• try the consumer on the playbook, but error when compile...

  Hai all, I tried Messaging on SDK Playbook, when I compile appears error like this

  Error: Unable to resolve resource bundle "e-mail" for locale "en_US".

  Error: Could not resolve the "journaling" for locale "en_US" resource group

  Error: Unable to resolve resource bundle "collections" locale "en_US".

  my code is:

  _Consumer = new Consumer();

  _Consumer.channelSet = new ChannelSet();

  _Consumer.channelSet.addChannel (_streamAMF);

  _Consumer.destination = "RTStream";

  _Consumer.selector = "Viewer ="RT"

  _Consumer.addEventListener (MessageEvent.MESSAGE, onMessageHandler);

  _Consumer.subscribe ();

  can someone help me?...

  Continuous support of Playbook SDK?

  Thanks before,

  Rick

  Hi all, after I changed my configuration on Configuration external tool (Run--> external tool--> Configurations of external tool) and added - library-path += "/ Applications/Adobe Flash Builder 4/sdks/blackberry-tablet-sdk-0.9.0/frameworks/locale/en_US" works well.

  Thank you Fabien...