Error when downloading an application of newsstand

Similar Questions

• Windows Update lists an important update, but I get error when downloading it. "Fix" suggested did not work.

  Windows Update lists an important update, but I get error when downloading it.  I ran update readiness tool and two logs in Windows\logs appear no error at all and nothing fixed.  The update that will not download is KB974332, which can solve some problems I encounter.  What else can be done, or should I ignore this update?
  Just upgraded to Win7 64-bit, Vista 64 - bit Edition Ultimate Home premium.

  Hello

  Welcome to the Microsoft Vista answers Forum!

  We would like to ask you some questions to help us focus on the right place.

  (a) what is the error that you receive on the computer?

  (b) since when you are facing this problem?

  You can try the steps below and check if the problem is resolved.

  Note: this problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and look for the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Also, visit the following link for more reference on the particular update.

  http://support.Microsoft.com/kb/974332

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I have osx EL Capitan on my mac and if I click on the right icon cloud site get creative every time error on download een applications which can make

  I have osx EL Capitan on my mac and if I click on the right icon cloud site get creative every time error on download een applications which can make

  Hello

  for this problem, you can refer to the following link and discussion

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  Persistent Cloud error - error download - creative

• I have updates that show the error when downloading

  my computer shows error when you try to download updates

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Photo not valid error when launching an application

  Hello

  When launching an application through the web browser, I get this weird error.

  Starts the RDP session, the profile starts to connect, and as username and group political stuff ends, I get a little popup with the title 'Quest vWorkspace Shell' and "invalid image" message.  At the bottom of the screen is a pnshell.cmd minimized command prompt that is sitting there until I click OK in the popup mentioned previously.  Once I click OK, then the vWorkspace application will launch successfully.

  The pnshell.cmd has the following inside:

  REM added by RMC to prevent permissions app sprinkled with admins

  c:\Windows\syswow64\Ifmember administrators

  If not ErrorLevel 1 Goto SkipAdmins

  c:\Windows\SysWOW64\pnshell.exe

  I'm on vWorkspace v8.0

  The RDSH is 2008 R2

  Any ideas why I get this error?

  Thank you!

  Nick.

  Hello Terry,

  Thanks for the reply.  We use Sophos, but I added the file C:\Windows\SysWOW64\pnshell.exe to the list anyway, restarted the TS, and it's always as problem.  I also added pnstart.exe to the list too.

  I noticed now that this happens only to a specific user.  Other users seem to be the problem... So... don't know why, but I hope it's a?  If you have any ideas why I would be eager to hear.

  Thank you

  Nick.

• error when downloading the software of firepower

  Hello team,

  We encountered some problems when downloading the software of firepower.

  See error below.

  #!/bin/sh
  # This script was generated using Makeself 2.1.5
  
  SHA512="f618026ab402b52d1c8b9714db5976f29413416e0935250943d96bcb62293b220bdefe199a3dee68daee99255243b201dcc03f3ac153d3b4287259f8d51f974c"
  CRCsum="910147708"
  MD5="c66a288f0f74d0bb79997f70b7a615c1"
  TMPROOT=${TMPDIR:=/var/tmp}
  RETURN_STRING="MD5"
  label="Sourcefire 3D Device S3 Upgrade / Thu Oct  2 16:38:40 UTC 2014"
  script="./upgrade.sh"
  scriptargs=""
  targetdir="upgrade-root"
  filesizes="570522744"
  keep=n

  Hi John,.

  Do not know what are these errors, but if you still can't download the software and then open evidence of the TAC, available engineer will publish the image of the software required for you.

  If it's because of a question of privilege, you can try to email him at [email protected] / * / as well with your contract information.

  I hope this helps.

  Kind regards

  Dinesh Verma

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• connection to the server is not available error when downloading the journel

  Dear experts,
  
  When downloading the journels to R12 using ADI we face below error
  "connection to the server is not available, please contact your technical support representative.
  
  our environment is apps: 12.0.6 and database 10.1.0.5, linux redhat 5
  
  Please suggest on this issue, there is no error in appl_top/bne/12.0.0/log (infact nothing in this directory)
  
  
  Concerning
  Francis K.
  
  Published by: 918055 on July 3, 2012 06:54

  918055 wrote:
  Hello Hussain,

  Problem has been solved, raised the issue because of the Excel settings, we enabled the option "enabled all macros" and then it worked fine.
  Thanks for your advice on this matter

  Kind regards
  Francis K.

  Thanks for the update and for sharing the solution!

  Hussein

• Error when creating an application of FDM on SQL Server 2005

  Hello
  
  We receive this error when you create an application of FDM on SQL Server 2005
  
  
  Error: EPMCSS-07003: unable to validate identity. Invalid identity. Verify the identity. [SET_ROLES_LIST]
  
  
  We use the integration of Windows system even if we also tested with the user's.
  
  Any ideas?
  
  Thank you

  Based on the error message that seems to have a problem of Shared Services. Check that the "ADMIN" account is used for the connection of HSS and that you are using "ADMIN" to create the application and see if the same error is returned.

• I can't install a creative Cloud applications, I have several errors when downloading, and they're not just going to

  When I try to download Illustrator, I get 2 fatal errors and 1 WARNING and exit code 183, and when I try to download Photoshop, I get the exit 15 and a press error DB 6 code...

  I don't know what all this means other that it makes it impossible for me to download these programs, I stayed upward all night trying to figure it out, but nothing has worked. I have cleaned my temporary files, restarted my computer, used lead app and re-installed CC cleaner, but it does not yet

  Anyone can shed light on what is happening?

  When you install software that is not genuine, you know not what you found or what it can do for your system.

  In addition, counterfeit software might be blocking your legitimate product activation and causing it to fail. Please check your file host such indicated below.

  Windows

  Locate the hosts file.

  Click Start, run, type "% systemroot % \system32\drivers\etc", and then click OK.

  Right click on the file and select open. Select the application Notepad open the hosts file.

  Save a backup of the file. Choose file > save as name the file hosts.backup, and then click OK.

  Find 127.0.0.1 activate.adobe.com and delete this entry.

  Save the file and close it.

  or you can create a default hosts file following these instructions
  Please see: http://support.microsoft.com/kb/972034 for instructions.

  Mac

  Open a Finder window. Choose go > go to folder.

  Type "/ etc" (make sure that the client is logged on as administrator).

  Select the hosts file and open it.

  Look for the entry 127.0.0.1 activate.adobe.com and delete this text

  Save the file and close it.

  If you still have questions, please contact support for assistance:

  FAQ: How to contact Adobe for support?

• I have an A12E6 error when downloading and installing applications

  I have a

  • Error A12e6 error during the download and installation of apps yesterday, I had the A12e1 so I have used the cleaning tool and did a new install but even today, I have an A12e6 arror
  • Do you have a solution for me? (mac osx 10.7.5)

  cordially Arold

  Arold salvation,

  Welcome to the Forums

  http://forums.Adobe.com/thread/1197816 or http://forums.adobe.com/thread/1291134 can help,

  Thank you!

  Florianne

• Locked phone error when downloading pictures

  I have an old MacBook Pro still on Mac OS X 10.6.8 system which I can't update operation. When I plug my iphone SE I get an error message on my laptop that my phone is locked while my pictures can not download. I disabled all the my lock settings on my phone restarted and reconnected my laptop and always the same error message. When my iphone asking to trust new device that I have selected trust and yet they will not connect to upload photos. I need to download a video in iMovie to edit and put in a powerpoint presentation. Help, please! My project is due in a few days.

  Your problem is maybe iTunes being obsolete.

  In the meantime, connect your iPhone to your Mac via a USB cable, and then launch the utility to Capture images from your Applications folder. Image capture will allow you to import files directly on your desktop.

• Error when downloading images for blackBerry Smartphones

  My bberry 8520 was working fine until I updated to Facebook but now I can't download the pictures on Facebook! Can someone help me deleted personal information to comply with theCommunity guidelinesand theterms and Conditions of use.

  Hello agogoman,

  Welcome to the forums.

  What happens when you try to upload a picture? You get an error message? Have you tried to uninstall and reinstall Facebook® for BlackBerry® smartphones application?

• BlackBerry smartphones HELP! 507 error plus error when download is my biggest nightmare!

  Please help with my problem... I woke up this morning with my "BOLD" with a white screen and "Reload software 507" error... Since follow-up, I have some advice on the forums with a similar error, but without success.

  When I connect my "BOLD" for the PC, the Desktop Manager says essentially disconnected at the top and 'none' to the device at the bottom. When I try to update via the application loader, I enter my pin code and he's looking for the OS, then finally I get the message "an error occurred while downloading software for your device, try again later". My internet connection is definitely work. The error message also alternates between 507 and 561.

  I also downloaded the latest OS via the site Web de Blackberry directly to my PC and then run that. Same evetually problems when you are trying to connect/setting to date.

  Are there solutions? Thanks for your help.

  Follow the instrutcitons (exactly) to download and install the operating system in the first post of this thread.

  http://www.BlackBerryForums.com/General-9700-series-discussion-bold-2/239270-latest-OS-9700-5-0-0-16...