Cruzer 16 GB - error message Pop

Similar Questions

• Assassins Creed installation unit, an error message pops up: Isdone.dll. An error occurred while unpacking. Error code - 6.

  Original title:

  Problem during installation

  Hey guys,.

  I tried to install the Assassins Creed Unity on windows 8 and an error message popped up: Isdone.dll. An error occurred while unpacking. Error code - 6.

  How can I fix?

  Thank you

  Hello

  I'm not familiar with this specific file, but it is possible that you have DirectX Runtime June 2010, which is an optional update that needs a lot of games. It may be necessary to ensure that your game properly install\extract...

  Even my Lexmark printer requires... I'll include a link to the full installer...

  This is a package to free extraction. It will extract after double-clicking it so be sure to note the location where extracted you\it.

  Open the folder, and then double-click DXSETUP.

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• I got this error message pop up? How should I do?

  I got this error message pop up when I tried to pull up of CC of Adobe InDesign and Adobe InCopy CC: "Unable to launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and restart Adobe InDesign. " How can I solve this?

  Hello

  This error message indicates that you have not permission to record Preferences.

  How to set permissions in the folder Preferences, that you please go through one of the Preferences file read error

  I hope this helps!

  Kind regards

  Sandrine

• iTunes 2 error messages pops up saying (bad iTunes.exe windows system32/Dsound.dll Image the other says error error193 7windows)

  Orirginal title: help please...

  Whenever I try to open my iTunes error messages 2 pops up saying (bad iTunes.exe windows system32/Dsound.dll Image the other says error error193 7windows) I uninstalled iTunes3 times and it does not help. I ran AVG PC tuneup, also I ran malware scan and nothing. IM about to go crazy, being not able to get on my iTunes. If anyone can help. Icalled iTunes and share there not on.

  Follow the instructions in the article of Apple to remove all instances of iTunes, then reinstll.
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Use the control panel to uninstall iTunes and software components in the following order, and then restart your computer:

  1. iTunes
  2. QuickTime
  3. Apple Software Update
  4. Apple Mobile Device Support
  5. Hello
  6. Application of Apple Support (iTunes 9 or later)

  Important: Uninstalling these items in a different order, or uninstallation of only some of these components may have unintended effects.

  You can also post in the iTunes forums for assistance.
  https://discussions.Apple.com/community/iTunes/itunes_for_windows

  Sincerely,

  Marilyn

• C310a - I can't stop all the HP error message pop up when I start my computer

  Lately and since the fitting (authentic replacement) cartridges, the error messages - jam paper, cartridge problem paper loading, insist on popping up over and over again, even if I click on the relevant Red Cross to close.

  I tried the * beep * and on this forum for a solution.  I found the one nearest asked that the printer had to be checked for stray pieces of paper or other debris which would cause these messages to appear.  Apparently, they are all related to this type of error.

  I checked the printer including the duplex unit, but found no debris, lint or other debris.  I have downloaded and run the Diagnostic tool but still once, found nothing untoward.

  I'm happy the printer works fine, (it prints, copies and scans perfectly fine).

  I have to reset anything?  If so, how?  Or can someone tell me what I may need to do to solve the problem?

  Thank you very much

  Alright. I think it's safe to say that it is a software issue and not a hardware problem. So reinstall software has to deal with the problem.

  Click Start Menu > all programs > HP > HP Photosmart C310 Seris > uninstall to uninstall the software. Download the latest software and drivers for your printer using the link below, then run it to install the software again. This should solve the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-85745-1&cc=us&DLC=en&LC=en&OS=4063&product=4231205&sw_lang=

• "Windows PowerShell has stopped working" error message popping up constantly

  I get the error "Windows PowerShell has stopped working" message popping up constantly (several times per minute).  This started after I restarted my laptop with nothing else running but the standard startup programs.  How do I get this resolved?

  The detail section of the problem shows the following:

  Signature of the problem:
  Problem event name: BEX
  Application name: powershell.exe
  Application version: 6.2.9200.16398
  Application timestamp: 50338287
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 031cebc0
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi Kumar,

  Thanks for your reply. It was caused by Poweliks.

  What I did: reset the IE security (version 11) by default; Download the updated version of free version of Malwarebyte s in SafeMode with network connection; restored the system to the point before that he has been infected with the Poweliks (I got lucky that point to restore was not removed by the system yet); then re scan the entire PC in mode safe mode with networking. So far, nearly a week, the PC works fine and the Poweliks wish never to return.

  Thanks for all members of the community to help.

  Happy new year to all!

  -Kevin

• When you open firefox, how can I stop this error message pop up: NS_ERROR_XPC_JAVASCRIPT_ERROR_WITH_DETAILS

  It is in the body of the error message.

  ' [JavaScript error: "dir is zero" {file: 'file:///C:/Users/Peny/AppData/Roaming/Mozilla/Firefox/Profiles/1ga2twaw.default/extensions/%7B0538E3E3-7E9B-4d49-8831-A227C80A7AD3%7D/components/nsForecastfox.js' line: 323}]' when calling method: [ffIDiskService::get] ".

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode, you should be able to access the Manager of modules while in safe mode and disableuninstall modules there.

• Error message pop ups (-5006: 0x8000ffff) whenever I try to install a game in the first few seconds of starting up the plant.

  The games are compatible with vista 64 is fallout 3, the other is nhl 09. I have installed all updates for vista. I meet all requirments system for games, this computer is about 5 days old. Games both were purchased directly from a store. I don't know why he continues to be and would be grateful for the help because I just bought and I would play with my new toys =) the error msg continues to read:

  Error code:-5006: 0x8000ffff
  Error information:
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\ObjectHolder.cpp (442)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kerné > SetupDLL\SetupDLL.cpp (1284)
  PAPP: Fallout 3
  Softworks PVENDOR:Bethesda (http://fallout.bethsoft.com)
  PGUID:974c4b12 - 4 d 02-4879-85e0-61c95cc63e9e
  $11.0.0.28844
  @Windows XP Service Pack 2 (2600) IE 8.0.6001.18828

  UncleToadie,
  I found a few things, you can consult about it.  This article describes the error message regarding updates, but it can also help in your situation.
  I've also seen several references that you can rename your InstallShield file and then reinstall Fallout 3 by Bethesda.  However, I wasn't able to confirm that the site of Bethesda.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: Pop up on the desktop. See below _

  Quote: Microsoft Windows - utility wireless WLAN has stopped working.  A problem caused the blocking of the program works correctly.   Windows will close the program and notify you if a solution is available.
  Internet has been stop intermittently.  Need to contact the supplier and the re-start with LAN cable.  Is it more to do with the provider?

  I deas: how should I address this?

  • Programs? ng problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  This message means that the drivers or utility software for your card wireless (Wi - Fi card or adapter) crashes, resulting in the loss of network connectivity.  For the drivers and updated software, contact the manufacturer of your computer (if the wireless card provided with your computer) or people that what is provided (if it comes from an internet service provider).

  writing in the new message: * e-mail address is removed from the privacy... *

  * Quote: Microsoft Windows - utility wireless WLAN has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  * Internet has been stop intermittently. Need to contact the supplier and the re-start with LAN cable. Is it more to do with the provider?

  I * deas: how should I address this?

  * Programs? ng problems with
  * Error messages
  * These recent changes made to your computer
  * What have you tried to solve the problem

• variable error message pop-up Temp together

  This happens when I use microsoft office 2007

  this error? or here

• From time to time I get an error message pop up saying "Windows Explorer has stopped working"

  Original title: Windows Explorer

  Occasionally I get a pop-up box saying "Windows Explorer has stopped working" another "Windows Explorer restarts? -for example. Control Panel - change background. What can I do?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• "When I tried to install medal of honor' Pacific assult" I received a message saying insert disk two, so I did and then an error message pops up and says cannot open CAB file.

  without me being able to open this file I can't continue my game installation. Can u direct me on what I should thank you.

  You can try to download all the files from the CD to the hard drive and install there.

  If this does not help, try to install mode without failure. To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  You will want to choose "Safe Mode with networking" If you need to connect to the internet or your network.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  Let us know if that helps.

• Disk error message no. AdobeCollabSync.exe keeps popping up with Acrobat Pro DC.

  I am running Windows 7 with Acrobat Pro DC. Recently this message keeps popping up saying: AdobeCollabSync.exe there is no disk in the drive. Insert a disk in drive \Device\Harddisk5\DR5. I tried to remove Acrobat and reinstall but installation compared to the Creative clouds returned and download a version of Acrobat DC in English with Arabic support, which is not the problem of error message, but of course then there is a problem with Arabic characters for text etc. Change the language to English in the Acrobat preferences then gives me the error AdobeCollabSync.exe. Any ideas how to fix this? That it becomes very annoying were the constant error message popping up. Thank you.

  Hey Mark,

  Please uninstall Adobe Acrobat DC Pro, run the cleanup tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart the computer & new download Adobe Acrobat Pro DC using this link download Acrobat DC (DC) | Company or VIP.

  Let me know if the problem persists.

  Kind regards

  Nicos

• Get the 'Inbox truncation error' message constantly: delete inbox.msf but still get the next error download

  With the help of T-bird on the desktop with Windows 7. Every other time I download email error message popped up. The recommended fix (remove inbox.msf) only works for downloads then send one or two.

  Thanks for pointing out my obsolete version. I had no idea of the automatic updates do not cover changes to the Basic program, nor seem to generate warnings on obsolete versions.
  I installed the current version and see how it behaves.
  Thanks again.

• Flash stuck on a site, do not charge not (still invisible) and has no error message

  Hello

  I like listening to a radio station, but every time I open their website the player built on top is simply not visible at all. It should be just above the add element, but it does not load: http://i.imgur.com/e14UPsy.png

  The site uses flash, but I flash (later) and have no problems on other sites using such as Youtube, Dailymotion or Vimeo. It is also listed in my add on the page and checking Web site runs correctly.

  However I can't do a lot on the radio site, because nothing is visible on the player.

  The website is: http://seoul.fm/

  I tried IE which I use only to see if something is a browser issue or a problem of site and the player is loading properly in this browser.

  I get no error message, pop - up or anything like that when visiting it through Firefox.
  I also installed the last Javaa to see if that was the problem and he checked the website Javaa which he works.

  Flash is not blocked in the add menu.

  I've disabled all my add block extension to see if it caused the problem. No results.

  On IE, I need to activate Flash runtime to run it.
  I don't think that it is a Javascript problem but Flash script (I said in a response that maybe it's java partner but that is not true, I think).

  Hi BlueWaffle, I should have checked before: after that I agree the Flash, I hear no audio, either.

  What I see in Google Chrome, it's that the player uses the HTML5 audio tag and Flash is only used in the comment box. If Flash is not the problem. The problem is that the script that generates the area of the drive is not running. This page is very complex, using plenty of write-back loading, and I can't follow it very well. After 45 minutes, I give up.