CS6 Adobe installation is very slow if access to the internet is blocked

Hello

I noticed that our facilities Adobe CS6 (using package AAMEE) were surprisingly slow (as in five hours on a fast machine).  I have worked for the cause of the problem and am posting here in hopes it helps someone else has the same problem - in addition, if someone from Adobe is reading this, it would be nice to get it fixed, at least for future versions. :-)

The problem is that our machines have no direct access to the web sites on the internet, i.e., port 80 traffic is blocked by the external firewall.  I discovered that Installer CS6 tried repeatedly to contact various websites, including crl.verisign.net, probably in order to validate digital certificates on the files in the installation package.  Each such attempt was set to expire before the next was made.  Firewall Configuration Windows to block these attempts reduced at the time of the installation of five hours thirty minutes.

On Windows 7, this command allows to install a firewall rule that blocks traffic outbound port 80:

netsh advfirewall firewall add rule name = "block www" dir = action = block protocol = tcp remoteport = 80

Once installation is complete, this command deletes the rule:

netsh advfirewall firewall delete rule name = "block www.

For later versions (Adobe CC and beyond) you should block port 443 as port 80.

Tags: Adobe

Similar Questions

  • very slow to come on the inadmissible screen all the time programs

    ORIGINAL TITLE: very sad

    very slow to come on the inadmissible screen all the time programs

    Really not too much info to hel give us to understand what could be the cause of your problem,

    I advise you to complete the steps in this microsoft article.

    http://www.Microsoft.com/athome/Setup/optimize.aspx

    If you give us more details, we can give you more specific answers.

    Good luck

  • I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this.

    I have a 4TB vdisk and it occupies space is 2 TB and the remaining space is free but it is very slow, what could be the possible reasons and give the solution for this

    Assuming that you are talking about disk space from in the guest OS. You are probably using an MBR partition table, which limits the maximum usable disk space to ~ 2 TB. In order to use the entire disk space, you need a GPT partition table.

    André

  • When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

    Original title: Windows Explorer announced.

    When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

    I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

    He said that it takes several days to unsubscribe, so I don't know if it will work.

  • Cannot use applications that need access to the internet

    I have problems with a number of applications on my Vista system.  All worked well until a few days ago (I ran the Symantec Conficker and Msft Malware tools so am sure it isn't the Conficker virus).  I am connected to the internet and can go to websites via IE.  However, applications that require access to the Internet are faulty.  It started with Windows Live Messenger, which would not start (error message has been that there was a problem).  After much effort I uninstalled but impossible to reinstall as the installer does not due to "not connected to the internet.  Another application shows an error 80072efd - lack of connection.  I can't configure Norton due to the lack of ability to connect to services.  Any ideas?  Thanks in advance...

    Hi DebAlex,

    Is the name of the application Python ring a Bell to you? It is a programming language and PyWin32 is an extension for it.  Please do a search on your computer (include files and hidden folders) for the file name pythonw.exe and pywin32.
     

    Depend on whether you use on your computer or not Python, you might want to try find it in Control Panel--> programs and features and remove it from the list if you use the program.

    If you do not use the program, rename the folder these files are locate in (if you can find using the search).  Other people with the same error were able to fix this way.

    Let us know if this helps, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Deny access to the Internet

    I am very new to Cisco firewalls (got a little thrown in there) and I had a request to come down the pipe to deny access to the internet for a single internal IP address. My firewall is a PIX 515e. I'm guessing this has to do with the access list, but I don't know if I need to create a group and add only a single IP address to it or how really, even go about it. Any help would be appreciated.

    Andrew

    What you posted, it is difficult to find how different access lists are applied (how they are used). But it seems that you need another list of access. What you might look like this:

    inside_access_out access-list deny ip host everything

    inside_access_out ip access list allow a whole

    inside_access_out access to the interface inside group

    HTH

    Rick

  • How to keep creative clouds working without access to the Internet?

    I'll be out of the country for two weeks with virtually no access to the internet. How can I make sure that creative cloud will continue to work if there is no way to confirm the activation?

    Hi there-

    As you may know, a license check is performed every 30 days:

    http://www.Adobe.com/products/creativecloud/FAQ.html

    Do I need a continuous Internet access to use my Creative Suite apps?

    Because your Creative Suite applications are installed directly on your computer, you will not have a continuous Internet connection to use on a daily basis. However, you need to be online when you install and license your software and at least once every 30 days thereafter. The software warns you when you connect to the Internet for a license status check.

    However, if the product can not check your permit at the 30-day mark, a period of 7 days will begin to give you a little extra time. If you are not able to access the internet within 7 days, your applications will be blocked (Source: http://forums.adobe.com/message/4513667#4513667)

    Unfortunately, there is no way to "force" the verification process to ensure that the audit is not right because you start your 2 weeks away.

    Here are a few forum threads that contain more discussion of this issue:

    http://forums.Adobe.com/message/4747308

    http://forums.Adobe.com/message/4746582

    Good luck

  • Satellite L550-13u has no access to the internet

    Hello

    I have my laptop for a year and last week I had a problem, the laptop had no access to the internet but my other laptop (acer) had internet access.
    My brother has solved the problem. And it's happening again now, and it isn't here...
    This is why I post here. So I think it's a problem of the realtek software, or could you give your ideas and solutions if you had the same problem please.
    (I am a student and I need connection because I was about to download ubuntu packages to learn to use developers files).

    Note: My laptop has been 32-bit of windows 7 and Ubuntu 10.10 Maverick 32-bit; just to give you the info on the laptop.

    You use the local network Ethernet or wireless?

    You have disabled your firewall?

    Have you tried another browser like Firefox?

    The Internet don't miss to connect both on Windows and Linux?

    You have the latest version of the BIOS installed and configured the default settings?

  • Restrited access and without access to the internet

    When I connect my new computer home, he sees all the wifi nearby, and I can connect with my wifi. When I get to the Office I opened the computer, he sees our netgear wifi and wifi. That I connect to our wifi, after a time, she becomes limited or restrited and then I have more access to the internet. What are the causes that she. After that, I do not see any other wifi nearby either.

    I've updated the LAN driver and it solved the problem as you have suggested.

    Tthank you

  • Allow "Flatten XML" and "Unflatten from XML" to work without access to the internet.

    Hi all

    In my program, I use the XML Unflatten and flatten XML screw. On my development computer, everything works fine. As soon as I put it in the production environment, it has stopped working. I reduced to doing in my production environment, there is no internet access and I'll be never able/allowed to have access to the internet there.

    Someone at - it an elegant way to solve this problem? (By "elegant" I do not want to manually change all of the .xml files that I produce to include the path to the local LVXMLSchema.xsd) Is there a file .manifest or .config can we change to point my program compiled to the xsd on the right file? Perhaps another method?

    Thank you!

    Kind regards

    Filip.

    Hi all

    I think I found the solution.

    In the end, it wasn't an Internet. It was the inclusion of the classes in the compiled code or not.

    Attention! It was not enough just uncheck everything in the "Additional Exclusions" section of the building. I actually had instantiate each class possible, which can be converted by the "XML Unflatten" in the .vi. I even tried to put the lvclasses in the always include the article of the source of the build. This no longer works.

    Thanks for all your suggestions guys!

    Kind regards

    Filip.

  • I don't have access to the internet

    Separated from this thread.

    I don't have access to the internet. How can I get it back

    What is internet access from the browser or the network connection? What do you have on the PC?

    Open a command prompt and try "ping google.com" and see if you get a response like below.

    Ping google.com [202.124.127.249] with 32 bytes of data:
    Reply from 202.124.127.249: bytes = 32 time = 1ms TTL = 60
    Reply from 202.124.127.249: bytes = 32 time<1ms ttl="">
    Reply from 202.124.127.249: bytes = 32 time = 1ms TTL = 60
    Reply from 202.124.127.249: bytes = 32 time<1ms ttl="">

    If the request has timed out, you may need to check the network connection and see what are the settings in network properties.

  • How can I allow one of my children to use local applications, while temporarily blocking his access to the Internet and while allowing children to continue to access the Internet?

    I have three children who have separate user accounts on our two computers. Both computers running Windows 7 Home Premium edition. We use Windows Live Family Safety on each computer to our parental controls for defining when and what each child can access. We used the period of parental control feature to block every child signed to computers, except when we allow. (It would be nice if we could block a computer and allow them to use the other.)

    However, I can't find a way to allow a child to not use the computer for local activities (for example, Microsoft Word), while blocking its access to the Internet. I also want to allow his brothers to continue to use the Internet during this time.

    Any help would be appreciated. Thank you.

    Hello

    Windows parental control have no option to directly block access to the internet in a Windows user account, because the system needs to provide activity reports. To work around the problem, you can block all internet browsers available for this user account so that the child have no way to access the internet. Restriction of the app to access the control that installed programs on the computer children.  Here are the detailed steps to block some apps:

    1. on any computer, log on to the parent account for http://fss.live.com

    2. click Edit settings under the name of the child you want to change the settings and then click the App restrictions.

    3. check the circle next to turn on the restrictions of the app.

    4. check all programs related to access to the internet or type the application in the area of Search apps .

    5. check the box next to the application or the program once it appears in the list.

    6. click on Save.

    This settings apply only to that specific user account. If you have any other questions, please let us know.

    Thank you!

  • How can I download the drivers for a processor that crashed and does not have access to the internet

    How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

    How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

    First of all, please note that you mean a computer, not a cpu.  "CPU" means "Central processing unit". In modern personal computers, the CPU is a relatively small chip, an integrated circuit. It is located on the motherboard inside the computer case. It is not the case itself, nor is it the total computer, which includes the case and what it contains.

    Download drivers on another computer and put them on CD or thumb. Bring them to the computer in question, and then copy them there.

  • Access to the Internet and get a "atl100.dll" error when you try to use Firefox

    I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

    Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

    Hello

    1 did you changes to the computer before the show?

    2. What is the full error message?

    3. who is the antivirus installed on the computer program?

    4 are you using wired or Wi - Fi to access the Internet?

    5. What is the version of Internet Explorer installed on the computer?

    The possible causes:

    • ATL100.dll file is missing, as it was accidentally deleted from your computer
    • ATL100.dll file is damaged by viruses and your computer cannot access the file.
    • ATL100.dll associated with registry files is corrupt and obsolete.

    Perform the steps:

    Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: Run a scan antivirus on your computer.

    www.Microsoft.com/Security/Scanner

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

    Method 2: Reset of internet explore and check. (If you use Internet Explorer)

    How to reset Internet Explorer settings

    http://support.Microsoft.com/kb/923737

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    For more information, see the links:

    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    I hope this helps.

  • access to the Internet

    I want to be able to lock internet access to prevent its use when I'm not home

    Hi Lesleyhodges,

    You will not be able to completely block access to the internet other than to unplug the internet connection.

    You can use the option of Parental control and limit access. The links below provide detailed information that you can apply.

    http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx

    http://Windows.Microsoft.com/en-us/Windows-Vista/kids-online-A-parents-guide-to-monitoring-computer-use

    I hope this helps.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for

  • I can compile the project created in CVI2012 in CVI7?

    Hello I have the CVI2012 installed in a computer and I create a simple project to write a digital channel based on the example with DAQmx9.7. In another computer, it is installed CVI7 only, I think that the project includes the sources and headers (t

  • BBM HELP! BBM ver.10.13.6.9 trouble on save the image became multiple

    My blackberry Z10. After you download bbm version 10.13.6.9 I had when I was download the bbm group photo. And im save the picture in the file manager for this unit.The problem is when I download the first picture normally, but when I save second pho

  • error printer paper

    I have a Deskjet 3845.  The message on my computer says 'paper', even if the paper is loaded. I tried to re-boot all the methods specified in the manual.

  • Different specifications for A909n and A909g?

    Can someone tell me the difference between a first Officjet Pro 8500 (A909n model) and an Officejet Pro 8500 Wireless (A909g)?

  • Drop Down Menu problems

    I'm having a problem with my menu drop-down. In the MUSE, it shows the fall down under the appropriate heading. On the online site, however, is when it starts to spoil. In this case, as you can see in the image below, it is my 'MEDIA' tab in the main