. CS6 AI > fonts is set to black, but appears gray. Grayscale is set to RGB.

Similar Questions

• Custom fonts display in FrameMaker 10, but appear as blocks in PDF format. Why?

  FrameMaker 10, Acrobat X Pro,.

  Windows 7, 64 - bit PC

  These custom fonts display as numbers of circle of legends. When I 'Save as PDF', they become the blocks. Why?

  This probably isn't the cause, but...

  ... don't forget to embed fonts in the PDF file.

  If the non-Roman font is quite strange, the substitution on a system, there can be very strange indeed.

• Font size set to auto but sounds different when the data are populated compared to typed manually

  I have a form where all the size of the font of fields is set to auto. When data are filled in the form in a custom program the font size appears different to the name and first name fields. When the same names are typed manually in the form (not filled in the custom program) the font size remains uniform. There is no coding in the personalized program to manipulate the fonts or the font settings. What could be the cause of the change in the appearance of the font size. Another interesting is that after the program fills in the data, I can click in the areas affected by this problem and the police will change to what it should be but set in the right size once I have quit the field. I also see that some fields when filled will not be characters fat even if the police is set to a bold font.

  When a font of a field is set to Auto, Acrobat/Reader dynamically adjust the font size to match what is entered. When not using Acrobat/Reader to populate a field, it belongs to the program to properly set the font size based on the value of the field. Adobe does not publish any algorithm they use to determine the exact size (depending on the font used and the coordinates of field), so that a third party should use a better estimate (or not even trying at all), that looks like what is happening in your case. When you click within a field by using Acrobat/Reader, the font size is adjusted dynamically, but because the value of the field does not change, it is not defined when the field loses focus.

  A possible solution would be to use JavaScript to record all the field values, reset the form and then fill in the form using the saved values, this would cause Acrobat correctly define the appearances of field.

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• When open files in Photoshop CS6 files icons gone white with black box.

  When open files in Photoshop CS6 files icons gone white with black box. When I closed and exit the program, and then reopen its tracks for a few beautiful minute. but after half an hour, when I once again use Photoshop, it shows the error.

  Please give me a solution.

  All your windows updates are installed?  Try to clean the Windows thumbnail species.  I think use Adobe the OS dialog for features like open file. Also, to get thumbnails for RAW file PSD files, you will need to install codecs in windows. I use the fastepictureviewer codec package. What version of Windows are you using the dialog box look like a windows problem.

  

• My 2610 print correctly black not white documents in black, but copies in color (Pink).

  My 2610 correctly prints (from the internet or hard drive) black not white in black but incorrectly documents best (from the copier/scanner/fax) black n white paper in color (Pink).

  I have tried everything I know or have known. Of course, the black print cartridge (although a low replacement cost) is not the cause of the problem since it prints a black no white paper in black from the internet or the hard drive.

  ???????????

  Thank you and God bless you!

  Through a long trial and error process, I got lucky and I resolved and the resolution is not what I was expecting and makes no sense to me.

  Use the settings of the printer itself, I just changed the setting from "automatic" to the "plain" paper and the setting in 'text' value 'None '.

• I just bought a new Mac and they moved all my apps and documents.  When I open a document, he asked me to reactivate it I did.  Activation is successful.  The docuem == lying I'm working on a all text in black, but in the backgroun fishing shaded

  I just bought a new Mac and they moved all my apps and documents.  When I open a document, he asked me to reactivate it I did.  Activation is successful.  The docuemment I am train has all text in black, but in the background shaded peach.  How can I get all the text in a shaded background (white)?

  You work with a missing font...

• Have 10 Windows, theme fonts and change the size, but the size of the type for the outgoing emails is extremely low. How to reconfigure? to resiz

  The font size that I see when you type an email is tiny. Theme font & size changer is great, but it changed what I see when you type? I check "sent" and it seems fine. In my opinion it has something to do with the "body text" and/or "verdana"?

  First of all, these settings are in pixels, not points. If you have a screen high resolution, you may need rather more than you're used to. I thought I had addressed that in my article linked.

  Format | Size | Wholesale will send BIG CHARACTERS to your correspondents, and the real question is to get them to a size that suits you.

• IPhone 6 dropped, the screen goes black, but returns to normal

  I dropped my iphone 6, initially, the screen was black, but everyting worked perfectly I could even take pictures. I put on charger and tapped on the back of the iphone and the screen comes alive and everything was normal, nothing strange occurred during use, but after blocking and leaving intact, the black screen again to open. I had to put it in the charger and the tap at the back as before. Now I can't leave my iphone intact or the screen will become black again. I need help please! Is there a solution for this or would I need to take it to a shop to fix it?

  Hardware problems should be diagnosed at the Apple Store, or an authorized service provider.

  My guess would be that you probably have a damaged connection or in bulk as a result of the fall. That is why she helps when you press back.

  Backup your phone to iCloud and iTunes (encrypted) while you still can.

• Satellite L505 - 14 d: my screen is black, but the computer is still running

  I bought this computer in September and it worked fine except this time I had to reload the whole system because of two anti-virus programs, but I think that this has nothing to do with my problem. I've been on the PC, the other day, and all of a sudden it turned black. I wasn't doing anything unusual. When I looked at him the screen was all black, but the computer was working as he has always done. I also saw that the market and stop switch on the digital/lock pad would not react. (a green light appears when the caps lock/num pad is activated). What should I do to get this computer running again WITHOUT permanent black screen?

  Hello

  What happens if you press the power button / stop 4 sec long?
  You see the Red Toshiba home screen?
  Have you tried the external monitor or FN + F5 option?

  I think you should also try the common workaround;
  Remove the battery and unplug the AC adapter. Wait a few hours and reconnect the two parts. Then try to turn on the unit.

• My lenovo ZTE A1000-G screen black but on

  My lenovo ZTE A1000-G screen black but on I can not do anything by pressing the power button / stop + flight, until the touch pwr, touch pwr + low-flying and flying up and down but nothing happened please help what I do to solve this problem, it happened when I was playing a game in the middle of a game in progress lag and when I press the power button the screen turn black, but always on it please help...

  This is my new tablets...

  (Sorry for my bad engglish)

  Hi Grenven,
  Do what I say to reset (restart) your Tablet: -.
  --> Memory location opened by card (SD card).
  -> Take something thin and sharp as a safety pin or a toothpick.
  -> Now, you will see a small hole like structure near SD card slot. (In fact it looks clearly if there is something on the inside, but there are.)
  -> Spend your pointy thing in this hole up to a certain distance. (Pass slowly inside until you hear a clicking sound)
  -> Who has the reset button which will restart your tablet of any situation.
  -> Do not lose patience while finding the reset button. Do what I say and your tab will be back normal. Find it for the first time is a little more difficult but follow my steps, and you will get it.

  Good luck...!!

• HP ENVY 7645: new printer print black but not color

  Brand new game last week print black but prints color also in black. It copys color sheets properly. I checked the configuration of the printer at the time of printing and the black and white box is unchecked. I checked and then unchecked the box black and white without result.

  Thanks RnRMusicMan, but I had already tried all of your tips and they didn't work.  The printer is still under warranty, I went directly to the HP support and they solved the problem which was apparently that I had an old printer driver to a different installed printer that was interfering with the new driver with respect to printing in black and white in color.  After removing the old driver, the printer now works as expected.

• While I'm a game my moniyor go black but returns again and it keeps it but what is happening just currently

  Ideas:

  • While I'm a game my moniyor go black but returns again and it keeps it but it's just resentlyesently happens.
  • No error messages error message show
  • Recent changes you made to your computer just to allow the recommended for window update
  • What you have already tried to fix the problem just

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Doris,
  We need more information about your problem.

  What version of Windows and Service Pack do you use?  (e.g. XP Home SP3, Vista Home Basic SP1, etc...)
  This happens with only one game or it comes up with several games\applications?
  If this only happens with one program, which is the program?
  What are your system specs? (PC make\model, speed of processor, amount of RAM, videocard make\model, hard drive size and space available)

  Please post back with the requested information if you still experience this issue.

  Do the system to boot and see if that clears up the issue. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart Premium - C309g and it stopped printing in black (but prints color)

  Hi my HP Photosmart Premium - C309g and it stopped printing in black (but prints color). I tried: -.

  1. print test page - empty outside the windows logo
  2. Turning the power on and the
  3. programs form printing.

  Both black cartridges are full.

  printer is 3 days on 1 year warranty!

  I'm not very technical, so easy solutions would be preferred.

  Thank you

  Try the solution in this thread to clean the printhead C309g.

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps