CSS border-radius clashes with border-collapse
Can I apply the attributes to a data table. ?
Peattie Capital Management: Invested in the individual
radius of 10px works fine until I try to add border-collapse: collapse and then I lose the rounded corners.
Classes CSS (without the collapse of the border) is:
. featuredstocks { }
background-color: #eee;
border: thin solid #080;
border-radius: 10px;
box-shadow: 10px 10px 30px #888;
margin-bottom: 30px;
do-family: Tahoma;
do-size: 12px;
}
/ * minimal accommodation visual for IE8 and below * /.
.featuredstocks tr {}
background: #F2FEBF;
}
/ * Sets the background color for all the ODD lines background * /.
.featuredstocks tr:nth - child (odd) {}
background: #C5FA96;
}
/ * Defines the background color for all bottom lines * /.
.featuredstocks tr:nth - child (even) {}
background: #F2FEBF;
}
Any ideas on how it could be done would be very appreciated.
Thank you
I think this will give you the same result as border-collapse: collapse; with the exception that it will show the corners rounded.
{.featuredstocks}
border-collapse: separate;
border-spacing: 0;
Empty-cells: show;
}
Tags: Dreamweaver
Similar Questions
-
CSS border-radius rule does not work in IE9
Hi all.
I wonder if anyone has a CSS border-radius rule to work with release of RoboHelp's WebHelp/WebHelp Pro in IE9?
I have tried to create a new, empty project and have used some simple built-in CSS (no external CSS is called), namely:
< style type = "text/css" >
div {}
border-radius: 15px;
background-color: #f00;
}
< / style >
and then, in the <>body, all this:
< div >
< p > Hello world. < /p >
< / div >
The result is exactly as expected when viewed as Safari, Chrome and Firefox, but IE9 stubbornly refuses to display curved corners on the div. The same code works perfectly in IE9 when I write it in Dreamweaver.
I thought that I might have met around the problem when I found a site which proposes to add the following code to the head of <>:
< meta http-equiv = "X-UA-Compatible" content = "IE = 9" / >
It seemed to work when previewing the theme with the "Show selected item" button (it looks like a pair of glasses), but when the WebHelp output has been generated, the rounded corners were still left in IE9. The same is true when the output with WebHelp Pro.So, is the process of release of RoboHelp do something to remove the application of the rule of border-radius in IE9? By specifying values individual border-radius for each side of the div did not help either.I use RoboHelp 9.0.1.232.Hello
Just did a quick test and it's certainly a bug in IE9. It seems that when you use frameset, the top frame rendering mode is used for all of the images below. Given that the appearance of WebHelp file still use the game of HTML 4 frames, the IE9 rendering mode is on quicks mode or something.
Solution: Add the meta tag for IE not only your topics, but all of the htm files mode in your output. Try my rendered IE script tags: http://www.wvanweelden.eu/robohelp/scripts/ierendertags. This will add tags to all htm files in your output. Voila, the boundary curves are now visible in IE9.
A note: I have no idea what standard mode of IE will be at the table of the contents/index/search/etc. of the WebHelp. I don't know if IE9 is already supported by Adobe so be sure to test your WebHelp.
Take a bow
Willam
-
Problem with css border - will not appear in the browser
When I link my external stylesheet, my work of borders when I saw in IE, but when I put on my site (including the external style sheet) I don't see borders. My borders are around tables and tables inside and around a picture. In some documents, css border will show if I join the doc, but if I do css, external style sheet, it won't work. Any suggestions?
Thank you!
Can you post a url to your site?
-
CSS border for chrome google object flash, safari, firefox
using css in dreamweaver cs3 for border on a flash object
CSS code
#outerWrapper #contentWrapper #content object {}
border: medium solid #8f0000;
}
border shows in ie7, but not in chrome, safari, or firefox?
Murray * ACE * has written:
> I think you may have just the job...
>How to put a wrapper around Flash code and that the model with the borders? Then you can give this wrapper a class name and just use this class as the selector name unless you have a different style depending on whether or not it is in your div. of #content
--
Danilo Micen
| http://blog.Extensioneering.com/
| Extensioneer WebAssist
| Adobe Community Expert -
Dear community
I would add this code to MUSE for a border that surrounds my site/browser:
#top, #bottom, #left #right {}
Background: #000000;
position: fixed;
}
#left, #right {}
top: 0; bottom: 0;
Width: 15px;
}
#left {left: 0 ;}}
#right {right: 0 ;}}
#top, {#bottom}
left: 0; right: 0;
height: 15px;
}
#top {top: 0 ;}}
#bottom {bottom: 0 ;}}
is it possible to do it in MUSE?
I tried several ways and have failed. Thank you in advance!Michael
Yes, it is very easy to set borders indvidual... click on 'Contour' and you have large border adjustment tools. :-)
-
Problems with the collapse of Bootstrap Navbar
I tried to set up a navigation Bootstrap justified and do reduce the navigation bar with the menu icon 3 lines without a bit of luck. I looked at the default start navigation bar, pulled out the 'search', 'Registration' and 'Login', given that I don't need those and tried to place the structure to collapse in my menu and probably put something in the wrong place (instructions not exactly everything very detailed on their Assembly of their menu on the website "bootstrap") and when the screen is reduced to 767px the menu disappears completely. Any help would be appreciated. Also, is there a good book that goes in depth with examples on the use of bootstrap, instead of just quickly spraying it on everything as if we already know how to use the framework? Thank you, John
HTML:
<! - start trial navigation - >
< nav >
< div class = "container-fluid" >
< div class = "bar navigation-header" >
< button type = "button" class = 'bar of navigation-toggle' toggle data = 'collapse' data-target = "#myNavbar" >
< span class = 'bar icons' > < / span >
< span class = 'bar icons' > < / span >
< span class = 'bar icons' > < / span >
< / button >
< / div >
< div class = "navbar-collapse collapse" id = "myNavbar" >
< ul class = "nav justified to nav" >
< class li = "active" > < a href = "#" > about us < /a > < /li >
< li > < a href = "#" > < /a > < /li > team members
< li > < a href = "#" > Subscriber packages < /a > < /li >
< li > < a href = "#" > insurers < /a > < /li >
< li > < a href = "#" > Photos < /a > < /li >
< li > < a href = "#" > contact us < /a > < /li >
< /ul >
< / div >
< / div >
< / nav >
<! - end test navigation - >
CSS:
@charset "UTF-8";
/ * Customize links nav-justified to be fill the entire space of the .navbar * /.
{.nav-justified
background-color: #cfaf86;
border: .071428em #ccc solid;
border-radius: .357142em;
}
. NAV-justified > li > a {}
padding-top: 1.071428em;
padding-bottom: 1.071428em;
padding-left: .571428em;
padding-right: .571428em;
margin-bottom: 0;
make-weight: bold;
font size: .714285em;
Color: #000;
text-align: center;
background-color: #cfaf86; / * Older browsers * /.
}
. NAV-justified > .the > a.
. NAV-justified > .the > a: hover,
. NAV-justified > .the > a: focus {}
background-color: #e6cca1;
background-image: none;
-webkit-box-shadow: 0 .5em .214285em insert rgba (0,0,0,.15);
box-shadow: 0 .5em .214285em insert rgba (0,0,0,.15);
}
justified to .nav > li: first - child > a {}
border-radius: .357142em .357142em 0 0;
}
justified to .nav > li: last - child > a {}
border-bottom: 0;
border-radius: 0 0 .357142em .357142em;
}
This is a known bug in Dreamweaver CC 2015.2. You must add both classes manually in Code view, or by selecting the element of
-
The code works in all other browsers.
I appreciate all the work you are already doing and any help looking for a solution to this problem.
Thank you.
Firefox does not load the CSS (CSS/style. CSS)
The character encoding of the plain text document has not been declared. The document will be made with text truncated in some browser configurations if the document contains characters from the US-ASCII range. The character encoding of the file must be declared in the transfer protocol or file needs to use a byte as a signature of coding order mark. @ http://www.shelflifemagazine.com/css/style.css
Try to remove the attribute type for the CSS file.
You have:
<link rel="stylesheet" href="css/style.css" type="type/css"/>
Use it instead:
<link rel="stylesheet" href="css/style.css" />
-
Queries RADIUS changed with IOS
Hello
I have a few AS5350 voice gateways using a dummy radius server that has a "small" bug. It can be configured for authentication to listen on a port and for the account on another port, but when a bunch of hits with any port udp source the IP address of the sender it is not responding on the same udp port, but it sends the packet to the ip of the applicant with the destination port udp as the same port the application was received.
I don't know if anyone understands what I just wrote, so, let me give you an example:
as5350 with IP 1.1.1.1 with RADIUS server 2.2.2.2 scenario auth-port 1645 1646 acct-port:
1.1.1.1.1645 > 2.2.2.2.1645
2.2.2.2.1645 > 1.1.1.1.1645
(If as5350 sends the request auth using local udp port 1645, auth works fine)
1.1.1.1.21645 > 2.2.2.2.1645
2.2.2.2.1645 > 1.1.1.1.1645
(If as5350 sends the request authentication uses the local udp port other than the port auth of my Department, identification fails because the fake Ray sends the packet using the destination udp port 1645).
Using Versions of IOS 12.2 XB, everything is OK, the as5350 sends its requests for udp 1645 the port always.
Using the Versions of IOS > 12.2 (11) T, AS5350 sends its requests using the port udp 21645. The quick solution should change the RADIUS to 21645 acctport, which I did, and everything was OK for about 10 minutes. After that, AS5350 began to send requests using the port udp 21646 I therefore had no auth.
I could not determine how it changes the udp source port, but the problem is that it makes.
My Question:
Is it POSSIBLE for me to make my AS5350 using IOS 12.3 (2) T to send packets of auth and acct to my radius server, using a source not variable udp port?
Check out http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCea72719&Submit=Search and you will see that we have returned to the old behavior using 1645 only in 12.3 (3.6) T which is not available as yet (you could open a TAC case and get it posted for you if you wish).
For now, implement the workaround solution, but beware, this is a hidden command and apparently, although I have not tested, he don't just stand there after a reboot.
-
Authentication Radius Cisco with Windows NAP with encrypted authentication
I need authentication radius configuration for Cisco IOS devices for device management. My radius server is on Windows 2008 R2.
Can I implement this with encrypted authentication? In the attached diagram, can what protocol I use for encrypted authentication?
According to some sites, we need activate authentication in clear text. All those put in place secure as MSCHAP authentication?
Hello
You activate the text authentication (PAP) clear. Don't forget Ray sends the username in clear but encrypts the password. You can confirm this take a wireshark capture. You will also get the RADIUS encryption using a key to Ray long and complex.
If you want to encrypt the user name and password, then you would use GANYMEDE
Thank you
John
-
ACS RADIUS timeout with WLC 7.0 5.0
Hi guys,.
I'm setting up a device Cisco Secure ACS 1120 running 5.0.0.21 ACS to manage the RADIUS of a Cisco WLC 5508 device query running the 7.0.116.0 version.
- These devices have open communication on all ports - no firewall or ACL
- they have successful ping communication
The following statements illustrate some but not all debugging I did to make sure that each device works properly in isolation.
- Using the simple windows (radserv2.exe) instead of the Cisco ACS RADIUS server
- This works and the WLC gets answer my fortune Server RADIUS
- Using a simple windows EAP client to query the ACS using the RADIUS protocol
- This works and the FAC processes the RADIUS request and sends a response
- Placed a customer wireshark on the network to inspect the time-out.
- Wireshark saves the package to the WLC for GBA using port 1812 but does not see responses to GBA package
At the moment I have the
- WLC accepting wireless client association and
- sending the query RADIUS (EAP - TLS, PEAP and EAP-FAST) for GBA,
- the WLC receives no answer and generates a timeout message and separates the client.
- Note this is not a rejection or a similar message, the simple ACS does not even the package. i.e. There is absolutely nothing in the logs of ACS to suggest that he had even received a package of radius of the WLC.
In summary the WLC and GBA properly operate independently, but they do not communicate via radius.
Any help appreciated thanks
It seems that you use ACS 5.0 without tasks.
For your information, the version of the product is now up to 5.2 and 5.3 ACS should soon be released
I recall there was a problem with ACS 5.0 with WLC operations that has been resolved in patch for 5.0
I'm not sure of the specific CDETS but can be:
CSCsy17858 Any manipulation of Tunnel-Type & Tunnel-Client-Endpoint uploading incorrect
ACS 5.0 has a rollup with all the patches being accumulated approach
My recommendation would be to download the patch 8 for ACS 5.0: 5.0.0.21.8
Patch can be downloaded from CEC
To install a patch set a repository on ACS (cumulative patches are larger than 32 MB, you can not use TFTP to it), copy the patch file in the repository, click ACS CLI:
# acs patch installs repository
-
SE2 RADIUS AAA with 3750E Version 12.2 (53)
Hi guys,.
I'm fighting with NPS AA configuration for our 3750 array... authentication and authorization
I tried almost every config I could find online, but the more I got out it is a simple authentication. What I need is quite simple:
We have several ad groups
1 - Admin
2 - Readonly with few privileges for ping, traceroute and show, telnet
I need my switches to recognize groups and assign the correct private. But it doesn't seem to be the case. Can someone show a clean config for the switch and NPS?
Thank you
P.S. I created and deleted most of my configs so if someone has something to clean and detail I would very much apreciate it.
Hello
This is the configuration I have on my IOS switch:
AAA authentication login default local radius group
AAA authentication enable default group enable RADIUS
RADIUS group AAA authorization exec default authenticated if
RADIUS-server host x.x.250.20 auth-port 1645 acct-port 1646 key xxxxxxx
I created two policies on the IAS (yours would be NPS). Both have Windows groups such as designating a ReadOnly condition and the other in the FullAccess group.
ReadOnly results return Service-Type NAS-Prompt
FullAccess results return Type of Administrative Service
When a user of ReadOnly access, I get:
User access audit
Username: priv1
Password:
Switch > en
Password:
% Authentication failure.
Switch >
Thus, the user is limited to the unpriviledged (>) mode controls.
When a user of FullAccess accessing:
User access audit
Username: priv15
Password:
Switch #.
I get directly affected to activate the Mode (#) due to the Administrative value of the attribute Type of service.
According to the role based there is a document on the Forum that refers to GANYMEDE + as well
https://supportforums.Cisco.com/docs/doc-15765
Kind regards.
-
CSS to replace h1 with graph?
Hi all
I am interested in replacing the main titles on my page with a redefinition of the css of the h1 tag. I googled and found ways to set the background of the h1 and keep the h1 text display, but not a way to only show a chart and no text. can someone help here?
In addition, very important... did something like this characteristic effect SEO of my page? I have very good placement and I don't want to mess with my headers if she'll hurt my rank.
my comp is here http://www.eliteportraits.com/testsite/index.html
my css is here http://www.eliteportraits.com/testsite/basics.css
the graphics, I like to use instead of the section that says "Mark Stevens photography" is here: http://www.eliteportraits.com/testsite/testhead.jpg
Thank you!
Mark
eliteportraits wrote:
> Hi all,
> I am interested in replacing the main titles on my page, using a
> redefining css of the h1 tag. I googled and found ways to adjust
> history of h1 and the text of h1 display, but
> not a way not to show a chart and no text. can someone help here?http://www.TJKDesign.com/articles/tip.asp
HTH,
--
Thierry
Articles and tutorials: http://www.TJKDesign.com/go/?0
Perfect FAQ page: http://www.TJKDesign.com/go/?9
Templates CSS - P: http://www.TJKDesign.com/go/?1
CSS tabs menu: http://www.TJKDesign.com/go/?3 -
RADIUS server with no devices of the airport
Is there a way I can set up a radius server by using the OS X application but not a Terminal airport at el capitan? Thank you
See if that helps.
Mavericks of OS X Server - setting up FreeRADIUS
-
How can I remove an email address which clashes with another that is a little different
I have an e-mail address that constantly appears when I try to send an e-mail to my wife, like e-mail address begins with the same first name as my wife and if I'm not careful I could easily send the email to the wrong person.
is it possible to delete this address.
Delete the contact from Contacts.
If it is not a contact, then search in Mail, former winners (Windows menu) and it remove it.
-
Firefox takes two more minutes to load, the apparent clash with Norton Internet Security
Today, I tried to start Firefox in the Norton Support menu, it took more than two minutes to load. After that, it takes two minutes during restarting. When he finally he directs all Web sites a quick clarification, with the exception of Norton, which is very slow or not at all. Three sessions with norton support cat have not improved anything, and after the troubleshoote of Firefox, including resettlement are not resolved either.
I just finished a chat session with Norton who showed me where them exclude things Autoprotect and Firefox loads like greased lightning now. I enclose a document spirit a screenshot of the settings. Thank you for your support.
Maybe you are looking for
-
Hello guys, are there differences between money and black motorola xoom? Find a black buy in UK?
-
Audio and video is replaced by a mobile type picture lines screen saver.
Sent an avi file that I can play on Windows 7 WMP 12. Recipient has Windows XP WMP 11. The audio, but the video is a video of type screensaver of moving lines and forms etc. Any ideas? Thanks for your help.
-
WINDOWS/svmsinf.dll rundll error message
I have two rundll errors: C:\WINDOWS\svmsinf.dll and C:\WINDOWS\emibegukop.dll. How to fix them or get rid of them? Thank you.
-
How to open files bsaved graphics? (extension .bsv)
A little fallen on some files w this extension in some games, and end wondering how they can be changed. a response would be appreciated, help me please... T.T
-
App works not when you deploy with 0.9.4
Hi guys. I had created originally from my application using the 0.9.3 sdk and had no problems. I submitted my app and it was approved, but now I'm trying to re - submit with 0.9.4 and I even can't deploy on the Simulator. I get this error message: De