Audio and video is replaced by a mobile type picture lines screen saver.

Similar Questions

• replace her with audio recorded separately and run with audio and video original

  I recorded the audion with a high quality digital recorder.  How can I replace the audion taken with my video camera?  and make sure that it is in the sink with the video.

  Place the video on video 1 on your timeline. Right-click on it and select Delete Audio.

  Then press your Ctrl key (to avoid the ripplling) and drag your new audio Audio 1.

  I guess you used a fighter or some other cue audio and video so that you can synchronize the two lanes. Otherwise, it's just trial error to get them in sync.

• Qosmio F60: audio and video distortion during playback of a media file

  Qosmio f60 / win 7 64 bit / 8 GB ram / 1 GB video card...
  Purchase date: June 2011

  question: audio and video distortion during playback of a media file

  of fact steps:

  (1) updated drivers audio & video > update bios > sent to Toshiba UAE; reformatted > replaced speakers; same CPU > (more funny when im not connected online using wifi, everything is good and ok) > dealers replaced wireless nic > No. SUCCESS still questions...

  (2) being researched a few discussions > reinstalled the drivers SATA > IRST update of intel > no still no chance > uninstalled TSRI > used Mirosoft AHCI > HDD and PC health monitor update > disabled all the > always unlucky (this solution came from TOSHIBA himself of their technical knowledge base)

  Resellers cannot identify the problem... I followed the technical knowledge base and still not solved...

  CAN SOMEONE PLEASE HELP ME SOLVE THIS ANNOYING PROBLEM? IT BECOMES NOWHERE >

  Toshiba tech support, please help me to solve this issue... I just bought recently and I didn't like that at all. It is not worth...

  > more funny when im not connected online via wifi, everything is good and ok
  Does this mean that this problem appears only using the WiFi network?
  Hmm how about Wlan driver update? Try this.

• When I start Windows XP, my screen flashes, a help option is displayed in the taskbar and my audio and video have disappeared.

  After I start my system (XP) my audio system works very well. After some time the HELP screen flashes option appears on the taskbar and my audio and video sounds have disappeared. I can hear system sounds. I downloaded Fixit from Microsoft Support for its repair. But when I run it I see a runtime error 80040402. 2-3 days back, I had installed Avast 6.0.100 to get rid of a deadly virus that infected my flash drives. Since then, I have this problem. Help, please?

  original title: Sound stops working after a while

  Hello

   
   
  Follow these methods mentioned below and check.
  Method 1: run a scan for viruses with Microsoft Safety scanner and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: Before performing safety analysis make a backup of important data.
   
   
   
  Method 2: The scanner (System file check) SFC and check if there are any file system corruption.
  a. to do this, click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747
   
   
   
  Method 3:
  How to update a sound card driver in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/166774
   

• I lost my sound after updating my audio and video drivers

  After the download and installation of updates of my audio and video drivers, I lost my audio device. My Volume mixer, I get the message "no audio device is installed". At this point, I am really confused and frustrated after sent to websites other than Microsoft to get answers. Any help will be greatly appreciated.

  I have updated drivers AMD and ATI Radeon, neither of which are on my task bar more as they were before the update.

  I use "Windows Vista Home Premium Service Pack 2" at the moment.

  Model: HP Pavilion dv7 Notebook PC
  Processor: AMD Turion (TM) X 2 Dual-Core Mobile RM-72 2.10 GHz
  System type: 64-bit Operating System

  Hello

   
  I suggest you to follow the steps in troubleshooting section and check if it helps:
   
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
   
  Also, follow the steps from the link:
  Don't fix no sound or Audio problems in Vista
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00833257&tmp_track_link=ot_recdoc/c00898606/en_US/c00833257/loc:1 & cc = us & dlc = en & lc = en & Printable = yes & product = 18703
   

• Download and save audio and video files

  Hello

  I am trying to record audio and video files that are larger than 5 MB in size.

  I open a Http connection and asking to 128 KB each time until the completion of the data transmission.

  for some files that are 1 to 2 MB code does not work well, but if you have large files MB it throws the error, ' Eception Exception: myApp Application (201) does not; process is completed"

  How can I fix this error. I searched the forum for this error, I found some funda but has not found a solution.

  AM making ala invokeAndLater() and therefore not blocking is not the eventThread.

  Here is the flow of my code that establishes the connection and starts to download.

  the following code snippet shows the flow of the code.

  // Constructor: displays a popup screen that allows the user to select a list of audio/video files for the download. 
  
  // Dictionary obj is a vector that contains list of file names.// IAudioVideoPopUp is an interface implemented by the caller. 
  
  public AudioVideoPopUp(Dictionary[] v, IAudioVideoPopUp guideIntroManager)  {     super(new VerticalFieldManager());        if( v!= null)     {         caller = guideIntroManager;           for(int i =0; i< v.length; i++)            {             btnFileNames = new MyButtonField(v[i].value.toString(), "images/button1_big.png", "images/button2_big.png",  true, Font.PLAIN, 18, v[i]);             btnFileNames.setChangeListener(new FieldChangeListener()              {                     public void fieldChanged(Field field, int context)                    {                     if(field instanceof MyButtonField)                        {                         final MyButtonField tempField = (MyButtonField) field;                            UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen());                           synchronized (UiApplication.getEventLock()) {                             UiApplication.getUiApplication().invokeLater(new Runnable(){                                  public void run()                                 {                                     UiApplication.getUiApplication().pushScreen(new WaitScreen());                                        caller.onClick(((MyButtonField) tempField).getDictionaryData());                                  }                             });                           }//                           PopupCloseThread pct = new PopupCloseThread(field);//                         pct.start();                      }                 }             });               add(btnFileNames);            }
  
            btnCancel = new MyButtonField("Close", "images/button1.png", "images/button2.png", true, Font.PLAIN, 18);         btnCancel.setChangeListener(new FieldChangeListener()             {                 public void fieldChanged(Field field, int context)                {                 UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen());               }         });           add(btnCancel);       }
  
     }
  

  // onClick method that was implemented in the caller. 
  
  // dictionary is a vector, contains info about the selected file in the popup.
  
  public void onClick(Dictionary dictionary)   {     if(dictionary != null)        {         switch(ContentType)           {         case 1:               playAudio(dictionary);                break;            case 2:               videoSelected(dictionary);                break;            default:              break;            }     } }
  

  // the following code calls for the downloading and saving of the file.
  
  private boolean downloadAndSaveVideo(long movieID2, String fileName, String URL, int fileSize)    {     if(URL!= null)        {         try           {             String videoFileURL = AppConstants.SDCARD+AppConstants.CONTENT_PATH+fileName;             if(new DownloadCombiner(URL, videoFileURL, 128*1024).run())               {                 return updateVideoTable(movieID2, videoFileURL);              }         }             catch (Exception e)           {             Tools.print("XCO: GuideIntroManager: downloadAndSave: Error..:" + e.toString());          }     }     return false; }
  

  // this is not a thread class. // here an repeatdly making the requests to get all the data.// please go thru the run().
  
  public DownloadCombiner(String remoteName, String localName,         /*int connection,*/ int chunksize)    {     this.remoteName = remoteName;     this.localName = localName;       this.chunksize = chunksize;   }
  
  public boolean run()     {     boolean result = false;       try       {         int chunkIndex = 0;           int totalSize = 0;
  
            /*             * File connection             */           FileConnection file = (FileConnection) Connector.open(localName);         if (!file.exists()) {             file.create();            }         file.setWritable(true);           OutputStream out = file.openOutputStream();
  
           /*             * HTTP Connections            */           String currentFile = remoteName; //+ connectionType();            Tools.Debug("Full URL: " + currentFile);          HttpConnection conn;          InputStream in;           int rangeStart = 0;           int rangeEnd = 0;         while(true)           {             Tools.Debug("Opening Chunk: " + chunkIndex);
  
                conn = (HttpConnection) Connector.open(currentFile,Connector.READ_WRITE, true);
  
                rangeStart = chunkIndex * chunksize;              rangeEnd = rangeStart + chunksize - 1;
  
                Tools.Debug("Requesting Range: " + rangeStart + "-" + rangeEnd);
  
                conn.setRequestProperty("Range", "bytes=" + rangeStart + "-"+ rangeEnd);
  
                int responseCode = conn.getResponseCode();                if(responseCode != 200 && responseCode != 206)                {                 Tools.Debug("Response Code = " + conn.getResponseCode());                 break;                }
  
                Tools.Debug("Retreived Range: "+ conn.getHeaderField("Content-Range"));
  
                in = conn.openInputStream();              int length = -1;              byte[] readBlock = new byte[256];             int fileSize = 0;
  
                while((length = in.read(readBlock)) != -1)                {                 out.write(readBlock, 0, length);                  fileSize += length;                   //Thread.yield(); // Try not to get cut off               }             totalSize += fileSize;
  
                Tools.Debug("Chunk Downloaded: " + fileSize + " Bytes");              chunkIndex++; // index (range) increase               in.close();               conn.close();             in = null;                conn = null;              /*                 * Pause to allow connections to close and other Threads to run.               */               //Thread.sleep(1000);         }         Tools.Debug("Full file downloaded: " + totalSize + " Bytes");         if(totalSize>0)            {             result = true;                Tools.Debug("Wrote file to local storage");           }else{                result = false;               file.delete();            }         out.close();          file.close();     }         catch (Exception e)       {         result = false;           Tools.Debug(e.toString());        }
  
        return result;    }
  

  A little patience please.  Don't forget that you are awake does not mean that other people are.  I'd leave a Thread open for at least 24 hours before bumping.

  I'm sorry to tell you that invokeLater runs the executable on the wire of the event, not a separate Thread.  If you have actually started the treatment in the very thing you're trying to get away from.

  You must run the execution in DownloadCombiner treatment in a separate Thread.  This is why, in the article, which I suppose you DownloadCombiner, it extends Thread.

  Just for the record, DownloadCombiner is here:

  How - to download large files using the BlackBerry Mobile data system
  Article number: DB-00619
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800431/How_To _...

• Fusion audio and video clip

  Will be the first evidence of fusion audio and video clips so that I can then change them as a clip?

  richardb

  So that we keep in sync, I just wanted to clarify something... it is, your question is not out of sync audio before or after export. Ask not how to synchronize audio in Premiere Elements. Using the tools of Premiere Elements, you have been able to successfully replace the sound of the iPad with another audio source and synchronize the new audio source to component video without much trouble with Premiere Elements. I think that is correct based on what you wrote

  I found that I can synchronize the two audios and then delete one of the iPad and then link other audio and video. It seems that I can then edit the video and keep the linked video and audio.

  What did you use as your tools of Premiere Elements for the audio synchronization - Alt and arrow key (left or right) faucet to shift the audio 1 frame left or right or the SHIFT + ALT and arrow (left or right) tap to push 5 audio images left or right? These are details of Windows... for your Mac, did you use Option Alt and shift + Option for Shift + Alt? I'm strictly a Windows of the elements user.

  I hope that your future posts will clarify the following to make sure that we are clear about what your goals and make sure you have the information you need to work on your project.

  Is there a reason why you couldn't do all in a project and an export - create your Timeline with iPad video and audio special for it but also make additions to the project timeline prior to export of this timeline to a final product of Premiere Elements?

  If everything goes well and there is no problem that you have not mentioned, I would try to avoid re-encoding involved in the export and import of export in another project where the only issue is another exporting.

  Please consider.

  Looking forward to hear your progress as your schedule allows.

  RTA

• Unlink the Audio and video in gray in the first 13 items (Windows 8.1) [new user]

  I posted (or at least I thought the post worked) this Mar.27th question, but I can not find it or that the answers I have gotten so if anyone knows his comings and goings, I would appreciate you tell me how to see while I have 2 threads running for the same question. My question is: why is the ability to separate audio and video tracks greyed when I am trying to replace the part of an audio clip (without ruining the synchronization between audio and video existing). I work with a saved file "projectX.prel". I noticed when I opened a new project that the option to break the LINK is active. This seems contrary logic is to say action to break the link would be more likely to be needed when you are working on an existing file as opposed to when you are working on a new file? How can we separate the 2 components (audio & video) so I can just edit the audio clip without the work of procedure to break the LINK? Would appreciate any help anyone can offer with the foregoing. Thank you.

  garryw

  First broadcast 13 elements 8.1 on windows 64-bit. Have you updated to the 13 to 13.1 yet? If this isn't the case, please do so using Help Menu/updates to date of an open project.

  But for the immediate question...

  I don't see any sign of a previous post you so I'm not sure what happened to your prior shipment.

  When you import a file that contains the video and audio, they come into Premiere Elements project related - party video presenting the

  Video of track 1 and the audio portion on the Audio 1 track.

  If you want to unlink the audio of the video

  a. Select/highlight the chronology of the record and go to video Menu/unlink Audio and video and click it. It does not work.

  or

  b. right click on the file of chronology, and in the drop-down menu, find and click on remove the Audio and video link.

  or

  c. hold down the ALT of the main keyboard to the computer and click drag the audio from the video.

  Please consult the bulletin and review, and then let us know the result.

  If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA

• I accidentally blocked play audio and video on the BBC website. How can I unlock it?

  Today, a new video palyed often opens the door to a range of other unwanted videos.
  When my cursor hovered over this video window, engine block sign will appear in the upper right. I clicked on it, thinking that he would block the Stream of videos. Instead, who had arrested ALL the audio AND video games I can get on the BBC website.
  How can I unlock it?

  Hi, please see under the permissions tab and check the setting of the Flash - Page Info window - see technical details on the page you.

  If you are using an adblocker as Adblock Plus, also look at options/filter preferences.

  Either way, you have several version of Shockwave Flash - the oldest should be deleted - How to uninstall the Flash if necessary.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• iMac 7.1 displayport switch audio and video?

  Hi all

  My family would like to connect his iMac 7.1 2.4 Ghz Core2Duo until his TV downstairs, and I was wondering if the displayport located on these iMacs can transmit video and audio through, if we were to get a displayport HDMI adapter. Thank you

  The computer is about 10 years old, this vintage iMacs didn't have the ability to cross the Mini DVI audio & video port. The computer would need to discreet cables for audio and video.

• Final Cut Pro has a higher resolution audio and video to iMovie?

  Final Cut Pro has a higher resolution audio and video to iMovie?

  IT can have. If you put in higher resolution to begin with.

• operating Windows 7 Home Premium, 2 user accounts. Running a Firefox user can run audio and video, the other cannot. Can anyone help?

  Two accounts put in place. You can listen to some audio and video using Firefox, the other account can not. The account cannot broadcast a / v is able to steam has / v to aid (sigh) MS Internet Explorer. Is there a setting that I messed up?

  There are some compatibility issues between the last Flash drive and a few Add-ons Firefox or settings. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.

• Satellite C650-152: Audio and video started to jump after software update

  Download the latest BIOS updates and as requested my laptop network card, and now all the audio and videos, including on the internet, jump every few minutes.
  Really annoying as didn't have the slightest idea on the computer technical stuff and it doesn't seem to be in any way ask Toshiba support.

  Any help would be appreciated, I have a Satellite C650-152 with Windows 7.

  Hello

  Go into the BIOS (F2 when starting the laptop) and in the BIOS the BIOS default settings.
  Press F9 for default settings.
  Save the changes and restart the device.

  May I ask if this product just streaming audio or video from the internet or have you noticed that play audio and video files stored on the HARD drive?

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.