CSS for a single source project based on XML files

Similar Questions

• Problem creating test instance, cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  I got following error when running tests on the Workbench 2.1

  
  

  [February 19, 2014 16:27:10: TRANSPORT] [0] FRAME: Async command is monitored by the process of STAF 73

  [February 19, 2014 16:27:10: FACTORYIMP] SETTING [0]: insert in the container

  [February 19, 2014 16:27:10: TESTHASH] [0] INFO: VirtualMachine installation process

  [February 19, 2014 16:27:10: VIRTUALMAC] [0] FRAMEWORK: the Setup() method called

  [February 19, 2014 16:27:10: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_VM localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:10: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_VM getvms anchor 192.168.8.158:administrator

  [February 19, 2014 16:27:11: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = '192.168.8.150' password = 'infocore"username ="root") returned UNDEF

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] FRAMEWORK: new creation vaaivm1-150 VM from scratch...

  [February 19, 2014 16:27:11: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 19, 2014 16:27:11: TESTHASH] WARN [0]: found objects that need to be cleaned

  [February 19, 2014 16:27:11: VIRTUALMAC] [0] INFO: cleaning of the virtual machine: vaaivm1-150

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAME: HostSystem Cleanup() called

  [February 19, 2014 16:27:11: HOSTSYSTEM] [0] FRAMEWORK: the location of the swapfile to the directory of the VM on the host 192.168.8.150 restoration VM...

  [February 19, 2014 16:27:11: HOSTSYSTEM] SETTING [0]: setting VM Swapfile location to use the directory of the virtual machine

  [February 19, 2014 16:27:11: STAFBASE] SETTING [0]: command execution STAF: staf VTAF_Host localhost connect password of administrator agent 192.168.8.158 userid: 11:Infocore' 1 q ssl

  [February 19, 2014 16:27:11: STAFBASE] [0] FRAME: command execution STAF: staf localhost VTAF_Host setswapfilelocation anchor 192.168.8.158:administrator host 192.168.8.150

  [February 19, 2014 16:27:31: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:SetSwapFileLocation (HostName = '192.168.8.150' password = 'infocore"username ="root") '1' returned

  [February 19, 2014 16:27:31: HOSTSYSTEM] [0] FRAME: destruction of object 192.168.8.150...

  [February 19, 2014 16:27:31: LOGMANAGEM] COMMENTS [0]: recovery log file 192.168.8.150 host vmkernel.log

  [February 19, 2014 16:27:31: FILEUTILIT] [0] FRAME: PutTmpDirectory - called for destination host localhost

  The same problem was sloved.

  Re: Hardware Certification-do can not find the storage50info.txt file to...

• Hardware Certification - audit gives an error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.

  I tried to set the session established the IPs VMs / host / FQDN / VM names

  but each time got the error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.

  I changed the names VMS in vCenter for FQDN and it solved the problem.

• What is the best option for merge prel seven projects - using an intermediate file. using Premiere Pro or a Clipboard Extender?

  I did no editing for a few years and suddenly received (for me), a difficult task. I have now just finished editing a wedding shot with 4 video cameras (I took a few videos and other formats have been those who shot at random), in the first 14 elements. The formats of the clips are also different. Due to the fact that there was overlap so many scenes and the complexity of the task, I have divided marriage in 7 scenes, each is a file/project prel e.g. married dress, ceremony, etc. I didn't know at that time that it might be difficult to merge the projects. The final step is to merge these files so that I can make both BD and DVD.

  I initially purchased Premiere Pro for editing, using Pinnacle for years, but I was struggling too much with the Pro and the different formats of the clips, add music, overlapping, etc. Then I bought elements and was very uncomfortable with the Expert mode. I think that I am now ready to start using Pro.

  The specs of my computer are:

  OS: Windows Pro 64-bit 10. current version: 10.0.10586.306

  gigahertz Intel Core i5-2400 3,10; RAM: 8, 00 GB Dual-Channel DDR3. 64 bit

  First Elements 14.0.64 Version
  First Pro CC 2015 Version 9.0.0

  Here are a few clips (from MediaInfo) specifications (some of them might have been converted as they were given only to me some time after the wedding):

  1. Codec: AVC; Variable bit rate; Bit rate 16.4 Mbps; 1920 x 1080i. Frame rate: 25 fps; Sound: AC - 3; Bitrate: 256 Kbps
  2. Codec: H.263; Constant bit rate; Bit rate 36.6 Mbps; 1920 x 1080; Frame rate: 25 fps; Sound: AAC; Flow rate: 192 Kbps
  3. Codec: AVC; Variable bit rate; Bit rate: 24 Mbps; 1920 x 1080i. Frame rate: 25 fps; Sound: AAC; Bitrate 96 Kbps
  4. Codec: MPEG video;? Variable or Constant; Bit rate 25 Mbps; 1440 x 1080i. Frame rate: 25 fps

  Sound: MPEG Audio AC-3; Bit rate: 384 Kbps

  I tried to read as many threads as possible in this regard, but couldn't find much on the internet and most son/tutorials are quite old and refer to previous versions of Premiere Elements. I tried to merge it with Premiere Pro, after reading this (https://helpx.adobe.com/premiere-pro/using/importing-sequences-clip-lists-libraries.html; ( http://www.mediacollege.com/adobe/premiere/pro/import/), but I've struggled, as in the two references, it was either too little info or the guideline was not clear to me.

  I also saw wires on clipboard Extender (ClipMate and Spartan Lite) https://forums.adobe.com/thread/1148100 I downloaded Spartan Lite, but that seemed pretty confusing.

  I'm very uncomfortable to use intermediate files (https://forums.adobe.com/thread/875797?tstart=0) that I have enough space on my drive hard, but made a loose quality? On the other hand, I suppose it might be good for me to start using Premiere Pro now.

  What is the current consensus?

  Then I have another question and I don't know if I need to open a new thread for this. As I have shown above, the clips have all different characteristics and some files prel are save as 1440 x 1080 (where the scene starts with a clip of nr 4, others like 1920 x 1080) I guess I should have converted clips all to the same specification before editing, but I did not. There was so much work involved in this process that I can't think to change to a format and replace them current clips, etc. With the rendering, the different specifications will be a problem?

  One last question - I guess I just need to go to the BD and DVD specifications, or should I also realize the whole project in a format without loss of keep for possible future use?

  Another option is to use Cineform, who is a Visual lossless codec and produces smaller files means then Lagarith.

  Download Gopro Studio and install.

  This will give you the codec.

  art http://Shop.GoPro.com/EMEA/softwareandapp/GoPro-App-%7C-Desktop/GoPro-Desktop-App.html#/St = 1

• 4 AnyConnect as 802. 1 x begging replacement for Windows - where to put the configuration xml file?

  I want to try Anyconnect NAM as a 802. 1 x replacement begging in point 8.1 of Windows
  And I made myself a small config xml fine file I want to test.
  But where do I put this config file?
  I should rename it to something special or Anyconnect NAM have some additional startup parameters?

  Thank you.

  The file must be called "configuration.xml" and if you already installed NAM, then place the file in \Users\All Users\Cisco\Cisco AnyConnect Secure Mobility Access Manager\newConfigfiles\ Client\Network and restart the service anyconnect

  If instead you are creating a package for deployment, you can put configuration in a directory named profiles/NAM/so that the msi installation package will import the config itself.when you run the msi file.

• Digital signatures for export as ns dataNode in my XML file

  I created a simple form and need to copile responses as they are returned.  I was able to set up and it works perfectly except the fields of electronic signature.  There are two signature fields.  There are two signature fields.  When I export the files as
  XML and open it in Excel, there are three files for each file.  The signature field is called ' ns1: dataNode. two of the recordings, the column reads "dataGroup"; the third is empty.  I am currently using LiveCycle Designer ES2 and Acrobat X Pro.  What I would like in my Excel file is an indicator of whether or not it is an electronic signature that is present in each of these fields of two signatures.  Can anyone help?

  Thank you

  Gloria Diaz

  Gloria

  Unlike the fields of capture of data, such as text fields, checkboxes, Signature fields and numeric fields don't support "data binding".  This means that when the data is exported, the contents of the signature field (the signature itself) is not included in the XML data.

  If you want some pointers in your data that a signature was applied, you could write some JavaScript that is executed on the event 'Post sign' Signature field.  This script could set a value in a field (this field can be hidden), and then in the data, you can check the value of self-esteem if the signature field had been signed.

  Concerning

  Steve

• "Single source to multiple targets in the Oracle XSLT Mapper"?

  Can someone provide examples for the single source to multiple targets in Oracle XSLT Mapper scenario

  You can have several sources, but target the single node in an XSLT mapping.

• OSB: How to read the xml file, which is in OSB project

  Hello
  
  We have a generic proxy (PG1) reporting and deals alerts, this proxy is called in the pipelines of proxies anothers (P1... PN) in several projects. Each client proxy (P1... PN) PN) before call proxy PG1, configures a variable with syntactic alert or report.
  
  We thought it would be a good idea to store the specifications for all the proxies of a project as an xml file, so that the proxy PG could read the xml file. This file will be in the OSB project.
  
  The questions are:
  -proxy can read a xml file that is in the OSB project?
  S ' Please, are all the documentation for this?
  
  Thank you
  
  Kind regards

  You can always do customization to work with the properties defined in a XML xquery. The key to this is to use the customization of reference instead of find and replace the customization, similar to the service account customizations.
  Keep your real estate to as properties_dev of env xquery specific xmls, properties_sit etc then apply customization of service proxy xquery reference reference specific correct env.

• Based on XML dataprovider of the Combobox / Dropdownlist (spark)

  Hey guys,.

  I'm struggling a bit with a problem...

  I have a XML file which I use as a dataprovider for a combobox / dropdownlist. If I do that just in Flex with MXML (with a HTTP Service call and using its last result) it works well. However, I need to replace this XML file dynamically.

  But if I give one a section of an XML file dynamically loaded (loading is successful (for example xmlFile.Sensors) as dataprovider, I get this message:)

  Type coercion failed: cannot convert XMLList@18d8b629 to mx.collections.IList.

  Well, I came to that:

  collection: var = new XMLListCollection XMLListCollection();
  for each (var t:XML in sensorXml.Sensors)
  {
  collection.addItem (t);
  }

  .. .and by using the collection as a dataprovider. But seems a bit unnecessary... isn't there to fill the dropdownlist control with its content faster / more direct? As for example dataGrid offers you to use XML files directly as dataproviders...

  Hello

  What follows is a basic application that dynamically load your xml result in your dataprovider comboboxes.

  It may be useful

  David.

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/halo" minWidth = "955" "600" creationComplete = minHeight = "app_creationCompleteHandler (event)" ">"

  Import mx.events.FlexEvent;

  Import mx.rpc.events.FaultEvent;

  Import mx.rpc.events.ResultEvent;

  protected function myXML_resultHandler(event:ResultEvent):void

  {

  xmlMainMenu.source = event.result.children ();

  }

  protected function myXML_faultHandler(event:FaultEvent):void

  {

  Alert.Show ("could not sorry loading XML", "Error");

  }

  protected function app_creationCompleteHandler(event:FlexEvent):void

  {

  myXML.send ();

  }

  ]]>

  "result =" myXML_resultHandler (Event) "fault =" myXML_faultHandler (event) "/ >

  ======

  the xml code

  ======

• Conditional marking, a single source and reduce the size of the project

  Hi all

  I use RoboHelp 10, and trying to find a solution to some of the problems addressed in the draft I am trying, as:

  1. The RoboHelp project that we are working on is pretty important. As a result, generating output takes a long time. WebHelp output takes more than 15 minutes at times, while the PDF output gets stuck, and in the end, we need to cancel it. We have some sections in our project, which are widely used by all authors. If we do not want to divide the project into several projects of the children and then merge again as this would mean the unequal distribution of work among the members of our team. How can we reduce the size of the project to increase the efficiency? Is this something to do with file corruption or the number of pages?
  2. We use two separate projects for CS Help and WebHelp. We also plan to label conditional content WebHelp for CS project, so that we can create the help CS and WebHelp by using single-sourcing. One solution that I think might work is to create a new table of contents using CS in the project of WebHelp and generate the output labeled. To try it out, it didn't work well. Also, can I use a different style sheet for WebHelp and CS Help? If so, any suggestions as to how I can do?

  I'd appreciate it really all the help of all the experts here.

  Thank you

  RA

  Thanks for the additional info, Rachael.

  Regarding, "exclude no referenced topics of output", something to keep in mind that several output formats will include topics that are not explicitly listed in the table of contents. If this checkbox allows to exclude topics that you have not otherwise referenced.

  However, another approach uses conditional build tags that are applied to the topic-level.

  For example, your 2,000 pages assume a large part of those who did not appear in the table of contents, but you want a handful of reference pages available through the function of Research . Follow these steps:

  1. Create a conditional build tag along the lines, "Exclude all."
  2. In the list of subjects, select all, right click and choose Properties.
  3. On the Advanced tab, check your box exclude everything ,... .tick once... and then wait for RoboHelp update (it will be a long wait for 2 000 subjects.
  4. Once you have a visual confirmation that the box is checked, click OK to close the dialog box. Still, there is a lag.
  5. In your table of contents, right-click on each chapter and use shortcut keys [y + n] to access conditional compilation tags.
  6. For each chapter, in turn, clear the exclude from all check box. There will be a slight shift by the number of topics in each chapter.
  7. In the list of topics, find the topics that, if they are not in the table of contents, you want to be compiled with the project. Clear the checkbox to exclude everything for each one.
  8. In the conditional build Expression for your project, make sure your tag exclude from all in the column exclude output .

• HR 11 cmd line: error: impossible to analyze all project files.  Unexpected error: failed to prepare a single source

  Hello

  I am running RH (installed in Program Files x 86) 11 on a Win 7 (64-bit) machine.  I just created a new project with a lot of folders/subfolders and a single topic welcome.  This project compiles fine using the RoboHelp interface.  However, when I run RHCL from the command prompt, it refuses to start.

  Here are the details of the order and the results:

  from c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML

  c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML > rhcl 'c:\knowledgecenter\knowledgecenter.xpj'-l 'WebHelp '.

  Adobe (R) RoboHelp version 11.0.4.291 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: c:\knowledgecenter\knowledgecenter.xpj

  Layout: WebHelp.

  Output:! SSL!\WebHelp\Index.htm

  Scanning for the compilation project...

  Error: Impossible to analyze all project files.  Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHtml.

  I tried deleting the cpd and the project from the hhp file - has not made a difference.

  Help!

  Thanks in advance,

  Claudia

  Thank you.  What I discovered yesterday, it was that after the project SVN on my local machine to test the command line build process, somehow some of the FPJs was missing!  Because the folders containing the missing FPJs were empty, I guess GUI HR could ignore and compile correctly.  It turns out that I have somehow missed tried all FPJs in source control.  Once I got all the archived FPJs, when I refresh svn at the local level, the construction of the command line worked well.

  Kind regards

  Claudia

• No multi-screen HTML5 option is displayed in the presentation of single Source after the upgrade of RH9 project

  I opened my RH10 project and updated. Now when it opens, there is no other choice for Multiscreen HTML5 in the project settings or control panel available to Source monkey. The project has been generated/unreleased using WebHelp, but the idea was to be able to move in multi-monitor configurations. Any suggestions?

  Answered my own question. I went project Set-up/screen layouts, right click, chose the new provision of the screen and all added one by one. Then single Source layouts, right-click, new layout and choose Multiscreen HTML5 in the output Type.

  Not as easy to convert as I would have thought/expected so I'm leaving this here to help someone else.

• Titles of WebHelp for Single-Source output

  Using RoboHelp 8 to the TC 2.  I have 3 WebHelp outpts single source the same files that I use for the release of some AIRHelp.  AIRHelp, I can simply fill in a name in the title field help.  Where is the equivalent value for the release of WebHelp?  If I rename the project, all variants of my will have the same name.  I feel that it is very simple. ...

  
  

  He asked before. The short answer is no.

  The longer answer involves you asking to please consider submitting a form would ask Adobe to integrate this feature into the product.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• single source for assistance of various guides online

  I am pleased that the pod layout of single source in RH7 supports different channels.
  
  I also need to output different webhelps online using common subjects. This is what should be called unique source.
  
  Is it best practice to create a set of taylored and overlap of the tables of contents for a related set of online help?
  
  My work environment consists of a single software package with different interfaces for different types and levels of users. For each type of interface, another webhelp is mounted.
  
  How can I make sure that the title of the online help displayed in the web browser tab help is the right one for each variation of the online help?

  Single source is what allows you to obtain more than one out of a single source, either those exits ten different webhelp output or just one and out of print.

  You can have as webhelp output you can manage. Right click and add new ones or copy existing as a base.

  Best practices depends on your content. You can have different tables of contents for each output, or you can have a smaller number and apply conditional tags. So let's say 10 outputs you might have only three or four tables of contents and apply conditional tags to vary their. It's what suits you best and can be understood by everyone you work with.

  The scenario you describe would be ideal for HR work.

  The title bar and tab browser take their text in the title of the project in the project settings, so you will need to change this for each output.

• single source for 4.7 and 4.3 under Eclipse files

  I have a project in Eclipse, I used to establish with the 4.3 package. Now, I need support the new feature (virtual keyboard) in Strorm. I installed the package 4.7 for Eclipse. Now I have the problem:

  -If I build with 4.3, I can't use VirtualKeyboard package

  -If I build with 4.7, I can use VirtualKeyboard, but the application does not run on 8830 (older devices)

  Avdise me please. I would have to have 2 different projects with similar sources (I don't like this idea). Or can I somehow configure Eclipse to buid 4.3 or 4.7 for the same source files?

  everything is done!

  I copied

  C:\Users\Damir\.eclipse\org. Eclipse.platform_3.4.0_248562372\plugins\net. RIM. Eide.Preprocessing.hook_1.0.0.50.jar

  TO

  C:\Program Files (x86)\eclipse\plugins\net.rim.eide.preprocessing.hook_1.0.0.50.jar

  and it seems to work