CTRL + Q AUTO BRIGHTNESS - WHAT PROGRAM IS THIS?

Similar Questions

• What program opens this file? windowsupdate.diagcab

  Had to reinstall Xp after trying to install W8 install service pack 2 and the Installer 3.1 I do not have an association for the file type diagcab

  How can I change this?

  Thank you

  Ray

  Hello

  The description of the problem is unclear, to guide you in the right direction, I need more computer information by answering the following questions:

  (1) when exactly you receive this error message?

  (2) what is the exact error message / complete are you receive?

  (3) what is the exact problem you are facing?

  (4) have you made changes on the computer before this problem?

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• What program uses this file? qtipeipqqjyoxst.dll

  When my PC starts, I get this error message.  How can I fix this so do not get this error time my PC boots?

  Error loading C:\Windows\system32\qtipeipqqjyoxst.dll the specified module could not be found

  Random names like that are generated by malicious software.

  For example messages that are the result of you antivirus program blocking or by partially withdrawing this malicious program.

  Try to make a complete analysis with your anti-virus product and some free scanners like Malwarebytes and SuperAntiSpyware.

  http://www.Malwarebytes.org/products/malwarebytes_free

  http://www.SUPERAntiSpyware.com/

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  You can try to find references to this name using Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902

  and then turn them off by unchecking. Be very careful with this program. Incorrect use can make your system unusable.

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• When I try to open a. Using Autocad DWG, I always have to tell windows what program should I use to open this type of file.

  I always have to tell windows what programs use to open some files, even though I always tell him to use this program to open this type of file.

  Hello
   
  You can follow lionk below which may help you to solve your problem:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• When opening a program, such as system restore, it asks what program you want to open this program with ie adobe, yahoo, internet Explorer

  When you open a program, such as the system restore or turbo tax it always ask what program you want to open this program with a list of options such as the Adobe reader, internet explorer, yahoo Messenger, etc..

  is there any solution for this?

  Hello

  The issue seems to be with the file association so corrupt that I suggest you run the fix it or follow the manual procedure provided in the link below to fix the problem.

  http://support.Microsoft.com/kb/950505

• Cannot open e-mail messages. MSG, it's that there is no program associated with this file and define and association. Have no clue as to how or what program choose. Thank you jp__

  problem is email

  I assume you are talking about email attachments.  Each attachment has a three-character extension that associates the file with a program (in the start menu / default of programs / associate a file or Protocol with a program and then scroll through the list for the three-character extension).  Many are well known (.doc for Word Documents) and .pdf for Adobe Reader documents, but some are not so well known.  Some are also used by several different programs is sometimes important to know what program created the file in order to know what program to associate with her.  Your best bet since it is emails is to ask the sender to you say the name and version of the program so that you can install a program that can at least find out if is not working with the file if you do not recognize the extension.  Some attachments to e-mail are not intended to be read and there are programmatic reasons and must not be opened (but I can't give you a list of all of them - barely know they exist).

  Sometimes you can google the extension (for example, google .avi http://www.afterdawn.com/glossary/terms/avi.cfm) and a link arises which will tell you what programs can do the file type and which programs can read or work with the file type (or you may need to go to other links to get this reversal - in this case a lot of programs can open the file because it is a very common file for which many different programs have been developed - program that it becomes irrelelevant).  If it's a single program, so you know what you need.  If more than one program, you must the sender to tell what program you used to create the file unless the .avi file that can be read by the host (or you can guess or try different options until you find one that works but this can take a long time, can damage the open file with wrong program and can be expensive if you buy one of the programs that you are testing).

  In fact you do not define an association.  When you install the program, the extensions it can handle are identified by the Setup program and included in the listing file associations.  In fact, there is no way to add an extension to the registration of the association - you can change the programs that are used by the extensions in the list by default.  Some extensions are added automatically by Vista when installed and work a little differently than others (for example, .lnk or .exe), but we don't need to go into that, unless the extension you are having problems with is one of those (you don't mention the extension so I can't give you advice).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• I want to create images as Holger Lipman. What program and how I would do this. I learned to look at Processing.js and OpenProcessing. What is the equivalent to Adobe.

  I want to create images as Holger Lipman. What program and how I would do this. I learned to look at Processing.js and OpenProcessing. What is the equivalent to Adobe.

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Hello

  Not really sure, please try to post the request in the community specific https://forums.adobe.com/welcome

  Kind regards

  Sheena

• Download photoshop cc and it stuck at 2% - DSL download at 6 Mbps - What size is this program and why it is frozen at 2%

  Download photoshop cc and it stuck at 2% - DSL download at 6 Mbps - What size is this program and why it is frozen at 2%

  Jimk88 I recommend you review the download logs to determine the exact error.  You can find details on how to locate the logs from download to download the Cloud Creative applications error - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

• My programs take me to "what program do you use to run this."

  I just got rid of a virus with Norton 360. But now when I want to open anything it goes to a page asking you "what program you want to run it with ' and my options are internet explorer, adobe or Photoshop? I don't understand. That's happened?

  Hi Mike,.

  Thanks for posting the request in the Microsoft community. It seems that you are faced with the question with the file association.

  I suggest you to refer to the articles and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

  If the problem is not resolved, please respond with more details and we will be happy to help you.

  Thank you.

• How to turn off Auto brightness? using windows 8

  Hello

  This problem of auto brightness is been bothring for a long time now and I can't find any fix for this at all the

  the display will:

  -Bright when seen on screen a white web page, document, photo

  - and it dims down when seen on the screen a dark web page / documents or photo

  I have tried everything I can find in the forums to stop it but no success at all the :'(

  Note 1:

  I changed the settings and turn off auto brightness in windows 8 advaced power plan settings

  

  Note 2:

  I tried to disable the Vari-Bright AMD but the windows 8 AMD Catalyst Control Center, but there is no option to turn off :/

  

  Note 3:

  I turn off the sensor monitoring Service in services.msc menu... but yet did the thing :/

  

  Note 4:

  I disabled Intel Display Power saving technology intel graphics and media panel and... with all this, however, the problem of brithtness auto is not resolved :/

  

  now... really, I have no idea what to do with all this attepemts and can't get rid of it, I start to lose hope I can use my laptop without the screen change BRIGHTNESS on its own, watching a film and surfing the web with the screen flickers to fits in the background, it's a terrible situation, I see not just why HP or other manufacturesee gpu this as a solution to what anyone It is just a continuous headache that I can't get rid of

  Please, I need your help guys, if anyone has found a solution to this... Tell me (and others who might have the same problem) how to fix

  Thank you very much

  Found a solution that worked for me crazy (because it was also me).

  I'm on a HP ENVY 17 Notebook PC with Intel HD graphics card (4600):

  Right click on desktop

  Select "Graphics properties" (to adjust the Intel graphics settings)

  Select "Power".

  Click on 'on battery '.

  Turn off "display energy saving technology.

  I did this, so that an electric battery and it solved the problem immediately. Spent in AC, and it was still stable.

  I hope this helps!

• I AM RUNNING WINDOWS SECURITY ESSENTIALS AND I SAW THAT IT IS NOT NECESSARY FOR MY RUN DEFENDER. THE PROBLEM IS TRYING TO FIND OUT WHAT PROGRAMS ARE CURRENTLY UNDERWAY.

  DEFENDER OF DOSEN'T WORK. WITH THE HELP OF SECURITY ESSENTIALS. MAY NOT KNOW WHAT PROGRAMS ARE UNDERWAY.

  Hello

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Almost all cases no matter what programs run almost 100% of the CPU running.

  Hey guys I have a problem I could use some help with.

  I have a Dell Studio 1555 laptop

  Windows Vista Edition Home Premium 64-bit

  4 GB of Ram

  Intel Duo Core T6500 @ 2.1 GHZ

  I've had this laptop over a year now and it works perfectly but around a week ago, he went a little out of whack.

  Basically, no matter what programs are running my CPU usage will be 90-100%, which makes the laptop almost impossible to use.

  It comes and goes a bit, but for the majority of the time is around this margin. (for example I wrote that his party up to 10% once again, little about what I expected, but it will rocket upward again in a few minutes)

  The strange thing is that it doesn't seem to be a program or .exe using all CPU. Sometimes odd things as Dell Dock (which must use almost nothing) use up to 40% and if that gets closed or temporarily fixed things like explorer.exe, svchost.exe or whatever happens to be executed at the moment when will start using more CPU and look back up to 100%.

  Only, this started happening recently and I have no idea what made him... Any thoughts?

  Thanks a lot for all the suggestions/help

  (and just a quick update)

  My computer stopped a few times now unexpectedly as well and do not restart for 10 minutes. Once again, no idea why... The back of it felt very hot but I wonder if a fan issue could play a role?)

  Hello

  Heat can be the cause where the result of the CPU running so high. Make sure that the vents are clear and
  try adding a small fan blowing in the wind (or at least through them) to see how effective that has
  on the question.

  Check with a computer store real (not of leeks and glances at a Best Buy or other department stores) or Dell
  Support and Forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ---------------------------------------------------------------------------------------------------------------------

  This is a tool for troubleshooting to see if the software is part of the question - start with a clean boot.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I change what programs open with?

  How can I change what program opens

  Hello

  Do you mean startup programs? If this isn't the case, please provide a complete description of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns shows you the full list of registry and file locations where applications
  can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.