Current version of the CLIQ XT software

Similar Questions

• Trying to access the electronic books in the library of our audience. Downloaded the software, but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.

  Trying to access the electronic books in the library of our audience. Downloaded the software, (Overdrive Media Console) but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.5.0.1. How to do only what I can read ebooks? People have suggested using IE, but I prefer to much HELP Firefox!

  Try to update the media player while using Internet Explorer. Windows Updates site uses ActiveX to perform "duties. Firefox does not support ActiveX.

• Error Microsoft Life Cam "a later version of the Webcam Live software is already installed, to reinstall the life CAM software, you must first uninstall the CAM of your computer software."

  Dear Mircosoft
  I just bought the Microsoft Live Cam VX-2000.  You are able to help.
  I followed the installation, then at the end when the picture came on the screen an error message came on the screen: "a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer."
  I'm not very user-friendly computer.
  I get a green flashing on the camera.
  I can't use it in Skype.
  Thank you
  JO Smith

  Hi josmith416342,

  ·         You have installed all software associated with the device?

  ·         Do you have any device life Cam earlier?

  Check to see if the following is useful.

  Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.

  How to change or remove a program in Windows XP

  Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• My new Adobe Acrobat DC don't validate serial number Adobe has released me.  This is the version of the student/teacher software

  My new Adobe Acrobat DC don't validate serial number Adobe has released me.  This is the version of the student/teacher software

  Debbie !

  Please check if it works. Unable to validate the serial number

  Concerning

  Stéphane

• How to get the current version of the firmware of the ILO through VMware power CLI

  Hi all

  Task - need to know the current version of the firmware of the ILO (HP blades) and version the physical servers of IBM IMM.

  "I got the information through ESXi guest by ' smbiosDump | grep built-in-i"for IBM blades.

  For a server, it is easy to check by the manual connection. We need to check for multiple ESX hosts (also whole army has there own unique password)

  Is it possible, from where we can get this information from VMware CLI power by any script.

  We create 2 files, one for the hostnames of the host and in the other we can keep the password.

  Matt has a script that gets this information, see obtain information of Firmware HP to HP VMware hosts using PowerShell

• How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software.

  How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software. Now while one of them is open, I can't open the other, because it is hidden, and I have only shown in the taskbar as a thumbnail.

  Hi ewap51098943,

  You can disable this in the Edit menu-> preferences-> General

  

  Kind regards
  Nicos

• I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  Hi Mariam,

  Please try this:-with your PDF document open, click on the "comment section" on the side right of your document, under "list of comments", click the "Filter comments" icon and choose "View all comments" or "hide all comments.

  

  I would like to know if it works.

  Kind regards

  Nicos

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4 please guide properly.

  I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4

  Please guide properly.

  I use a 64-bit computer. I discovered the widgets were not made for earlier versions such as v7.4 had no 'library' to import these widgets to.

  Thanks for the reply but. I appreciate it.

• I bought the software adobe reader 10 online. Recently, I updated my software and I lost my access to tools. It seems that if I use a free version of the adobe reader software. How can I go back to my old version?

  I bought the software adobe reader 10 online. Recently, I updated my software and I lost my access to tools. It seems that if I use a free version of the adobe reader software. How can I go back to my old version?

  OK, you can still be installed. Check the start (Windows) menu or LaunchPad (Mac). If this isn't the case, you will need to reinstall with the media and the original serial number.

• Current version of the data in the database has changed...

  Hi, I have an updated report which hurts...
  
  This is the SQL code for it:
  
  Select
  "ITEM_BOM_LINE_ID,"
  "ITEM_BOM_ID,"
  "ITEM_ID",.
  "ID_PROCESSUS,"
  "SEQ,"
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  "VOLTAGE_PROBE,"
  'POSITION ',.
  "POS."
  "DESCRIPTION".
  of ' #OWNER # '. " TOFC_ITEM_BOM_LINES ".
  where "ITEM_BOM_ID" =: P20_ITEM_BOM_ID
  
  In that select it the ID_processus or the item_id is defined. Cannot assign at the same time.
  
  The description field is what hurt. When I run the page and try to write something in the description field on a line where ID_processus is defined this error appears:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum = "B54E29267EC18630B58818FF4B710D41" element = '925466414031BD2DE082A6F954889340' checksum., update of "trailers". "" TOFC_ITEM_BOM_LINES ""ITEM_BOM_LINE_ID"= value: b1, 'ITEM_BOM_ID' =: b2, 'ITEM_ID' =: b3, 'ID_processus' =: b4,"SEQ"=: b5, 'QUANTITY' =: b6, 'UOM_CODE' =: b7, 'DESCRIPTION' =: b8
  
  It works fine when I write something in the description field on a line where item_id is not null. Also all other fields work perfectly.
  
  Can someone tell me whats wrong?
  
  Thanks :)

  Hello

  After a re-read of your OP, I noticed that
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  in your query.
  And it breaks when ID_processus is NOT NULL (and ITEM_ID is null), isn't?
  That's because you change (sort of) the QUANTITY and the UOM_CODE when that happens. Your query retrieves different values than those contained in the database (for example "instead of the actual value). And these 'new' values are compared with the values of database and then there is a difference. Where the error.

  But now: how to solve?
  What exactly are you trying to achieve with this construction? Is there a business rule that AMOUNT and UOM_CODE must be blank if ID_processus is not null? To add a constraint validation to your table and just show the values in your table. Or to show or hide a value of the terms of use. Or use another (made) column in your query that is not bound to a database field.

  I hope this helps...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Mru error: ORA-20001: error in MRU: line = 1 current version of the data...

  Hi, I get this error msg
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum
  
  I'll try to show a picture of the form in which I can edit and add data
  When I use the wizzard that's fine with editing but I cant creat a new element because I insert my primary key and that shoud be done automatically.
  
  New on OK
  My PK is the first col1 and col2 second
  I got a drop-down list in which I choose an item in col1 to just display items in my form with this value, here is a possible results more
  No, I want to change until col4 col2
  or add a line with the same col1 col2 different and some values for col3 col4
  But if I add a line I want to insert col2 to until col4 (and the PK of col1 shoud be automatically insert in my list of dropwdown I chose before)
  I want to col2, a drop-down list
  so it all works very well I got all the changes I want, but when I try register or update my changes I got the error above frome
  I think the problem is the primary cause key thing I want to choose a part manually but I
  
  to get the new line u uses the line link add but I use rather after my statement select one
  Select Union: P62_PNR_VOll, null, null, null from double
  to get my first pk automatically of my item in the drop-down list (in my case: P62_PNR_VOLL)
  How can I solve this error?
  
  thx for your help
  
  regadrs
  Falk

  Hi Falk,

  I ask you if there is already data in the table. You said no. :D

  If you do not need the data, you can delete it. Otherwise, you will need to change your number sequence from 41 instead of 1.

  To change your dialing sequence, you must file the sequence and recreate it. Run these two statements, one at a time.

  DROP SEQUENCE "E_BEDARFSTRAEGER_ID_SEQ"
  

  CREATE SEQUENCE "E_BEDARFSTRAEGER_ID_SEQ" MINVALUE 41 MAXVALUE 99999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE
  

  Sometimes the trigger can become invalid by doing this, if yes, just run the following again:

  ALTER TRIGGER "E_Bedarfstraeger_BI" ENABLE
  

  Andy

• Impossible to update to the current version of the software

  My iPad would not be updated wireless, so I tried to do it via iTunes (I have the current version). However, when I connected to iTunes, the summary indicates that my iPad is updated with IOS 9.3.5 (even when I choose Control upgrade).  Suggestions as to how I can update?  No harm in updating my iPhone.

  An iPad 2 can't be updated past 9.3.5. iOS 10 requires at least a processor A6.

  (145048)

• File InDesign CS 5.5 cannot be changed in the current version of the software?

  I created a book in InDesign CS 5.5 and also recorded the IDML format files. I am told by the person looking to change the files that it cannot open/edit my files because the version of the software appeared is too old. I assume that it uses the latest version of InDesign. Is this true, or should it be able to open the file CS 5.5 (the original or the IDML file) and change it?

  Hello

  No, it is not true. The latest version of Indesign should be able to open older files. You did she say what happens when she tried to open the file?

  Kind regards

  Malcolm