Curve of blackBerry Smartphones using BB 9320 in France

Hello

Maybe I'm new to using BB for first apology for a such ridiculous question.

I have just delivered, and I am intrigued by the sticker on the side that says "when it is used in France, this equipment uses no harmonized frequency bands.

I'm French and come home often enough, could someone tell me whether or not my phone works in France? I don't seem to find a simple answer online,

Thank you very much for your time and advice, I have only 5 days to send it so inappropriate.

L.

Hello

Ive had two different models of bb curve over the past 2 years... the last of them the 9320 and used both in France on a regular basis without any problem... I don't know what means this opinion, but as I said Ive has not had any problems at all, I regularly here ayear 3/4 times up to 3 weeks... hope this helps.

Tags: BlackBerry Smartphones

Similar Questions

  • Curve of blackBerry Smartphones used to synchronize with outlook

    I had my phone for about 2 months with no problems.  I tried to sync the BB through the USB port on my Outlook calendar.  It goes to a certain folder and no synchronization.  The program of the break, then he must stop State.

    I tried to reinstall the software, take the battery and try again.  Now, the Director of bureau says that there is no device connected, when the phone is in effect.  It is connected through the same USB cable and port, as always with success, I used.  The device shows that it is load and connected via USB, and I can use the card out of holder, which means to me that the computer recognizes the device, but the Desktop Manager is not.

    I also tried to delete all of the rim as shown in another post on the Board of Directors, and this solution didn't or didn't help.

    Help!  Thank you!

    I think I can understand the problem.

    I have indeed restart the computer, and I use only a USB cord, not a docking station.

    Here's what I think I've found somehow.  BlackBerry dislikes Outlook folders with weird things in the note section (i.e.. Attachments or html links).  There is a calendar folder that I noticed that I added when this happened.  He had an html link in the section notes.  After removing the link in this article, I did the following:

    (1) use the Blackberry software disk and completely uninstall the Desktop Manager

    (2) battery Blackberry tour and take 1 minute.

    (3) when the battery is out of Blackberry, reinstall Office Manager.

    (4) restart the computer.

    (5) replace the battery and turn on BlackBerry.

    (6) run Desktop Manager

    (7) select synchronization > Configuration tab > Reset Configuration - this tab closing button

    (8) reconnect the Blackberry with the USB cable.

    (9) sync Outlook calendar

    Seems to work!  If all goes well it will continue to work, but if not, I'll let you know.  Thanks for the questions!  Hope this helps someone else.

  • My Blackberry Curve 9380 blackBerry smartphones got error 102! Help me!

    Well, yesterday my blackberry restart itself and when he half reloaded, the screen become white with the text "" error Reload Software 102 for more information, please visit: www.blackberry.com/102".

    BUT when I went to this link, it cannot be found.

    So, how can I reuse this SMARTPHONE? I bought it 2 weeks ago, and it's urgent!

    Anyone, please help me! :"(

    Hello rianniecindy

    Welcome to the Forums of the BlackBerry Support

    Sorry to hear that your device encounters this error in two weeks. To recover your device, please refer to this knowledge base:

    KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

     

    Please note the above method will delete all the data in your device, I hope that you have a backup device.

    Additional information:

    KB10068 : "JVM 102" error on the BlackBerry Smartphone   

  • My BB Curve of blackBerry Smartphones always freezes...

    I always use my phone, the bb curve 9320, and now it always freezes. whenever I have send messages important, tweets, and surfing the internet I end up still waiting for black "timer" to be gone so I can continue...

    I checked the app storage etil still 21 mb.

    What should be the problem? I would really appreciate the help. Thank you!

    Hello! Have you done a hard reset?

    A hard reset is similar to rebooting a computer that is not responding. A hard reset shut BlackBerry applications and restarts the BlackBerry smartphone operating system reboots the hardware components of the BlackBerry smartphone, including the wireless transmitter/receiver.

    Note: A hard reset deletes all settings or the data on the BlackBerry smartphone.

    To perform a hard reset, follow these steps:

    1. Turn off the BlackBerry smartphone.
    2. Remove the battery.
    3. Reinsert the battery.
    4. Wait until that smartphone BlackBerry start.

    In addition,

    Confirm that all installed third-party applications are approved for the device

    Make sure that all third party applications installed on the BlackBerry smartphone are approved for the device. If the problem persists, remove third-party applications to ensure that they do not affect performance.

    And don't forget,

    Optimize flash memory

    You can keep the smart phone BlackBerry operating at peak performance by maximizing the available flash memory. Increase the amount of available memory on your BlackBerry smartphone by performing the following tasks:

    1. Add a memory card
    2. Remove unused languages
    3. Delete call logs
    4. Remove the sample video
    5. Empty the Cache and Cookies in the browser
    6. Delete rarely used applications
    7. Delete old data

    Keep us informed! See you soon

  • MY BLACKBERRY CURVE 9380 blackBerry smartphones

    Good day all

    My blackberry 9380 curve, asked me to restart and cela I did it, but after a while he began to show me a message saying JVM error 517 reset. I'm totally helpless because I removed my battery too and has replaced new but its always showing me this text... Please inform me of what to do because it's the first time this has happened... I really need help as in ASAP!

    We hope to get a quick answer.

    Thank you.

    Ashley

    Hello Bianchi

    Welcome to the community

    I know how it feels to have this error.

    First of all, please update the BlackBerry smartphone to the latest version of BlackBerry Device Software available before contacting the service provider wireless for repair or replacement options. For instructions on how to update the BlackBerry Device Software, visit the website of BlackBerry Device Software Updates or see KB03621.

    If the problem persists after reloading or upgrade, contact the vendor of wireless services for repair options or replacement should the smartphone BlackBerry still fall under the warranty coverage.

    See KB30332 for an example of JVM 517 error which is solved by a software update.

    Guilbert

    Ron

  • My Curve 8520 blackBerry smartphones does not illuminate

    Good afternoon. I have a problem with a BB 8520. It does not start. The LED lights up red and the progress bar is displayed, the progression starts and stops. And it always starts. You have a solution? Thank you.

    Try this:
    force detect the BlackBerry smartphone by using the Application Loader
    http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10144

  • Oweners of change for a Curve 8900 blackBerry Smartphones

    I just got a new 9380 curve and have changed the devices successfully. Now I have what to spend on my old Curve 8900 to a member of the family with their SIM card and I have problems with their registration to the device. Like creating BB email, change the e-mail accounts and make a new profile for internet services of BB.

    When a problem arises I follow the steps listed, but without success

    Any suggestions?

    1 wipe the device.  Read this:

    Article ID: KB28225 BlackBerry Smartphone must be wiped before transferring the security property

    2. make sure that the new card SIM HAS the BlackBerry Plan data on this account.

  • BlackBerry Smartphones use Storm 2 as PDA WiFi-Connected (without telephone service)?

    RESOLVED:
    See the second post in this thread for the solution (thanks to wiggler forum member)

    ORIGINAL MESSAGE:

    [I know I am a "retarded" for even bringing this place, but we'll just go beyond the part and talk about what I really want to know here ]

    My wife and I went to an Android (Bionic) for me and an iPhone (4 s) for her. However, his old phone (Storm 2) has recently been replaced because his former 1 storm went wrong on her... and now, since my father thought finally get something to replace his old (not to mention, broken and unusable) Palm device, we thought we might as well give him the Storm 2 and see if it'll work out for what he wants.

    Here's the deal about my father and his PDA... already has a cell phone, so he won't move up to a smart phone, because he does not want to pay the extra money every month just to get a PDA phone when he probably never really use the data service much and all that.

    He wants a phone just to be a phone, and he also wants a PDA... just for the PDA part.

    So, I thought, very well... If he is not willing to move completely in the modern era, then we can at least give him something he can synchronize with Outlook (it works... I already tried) to have its calendar and contacts with him all the time (which it is not able to do with his simple mobile).

    So what I know is that it's possible, at least in a very limited sense... I have the Storm 2 sync with Outlook.
    However, here's my problem... for a reason, even if the wifi card appears to connect to the wifi here in their home access point, it is not actually get an IP address and can't get out on the internet with the browser integrated into all.

    My question is this...
    Is it because it is not possible (i.e. RIM has configured to disable the card wifi within the unit while there is no mobile phone service connected), or who should run, and I should watch more in the sense of something wrong at the level of the home network?

    The reason why I think that it could be something awkward like that within the device itself, it is my new Android and iPhone of the wife are able to connect to the network wireless home here very well.

    Sorry for such a long thing, goofy needs help, but I thought it is a good starting point. If anyone has ideas and is willing to help, please chime.

    p.s. I am a computer scientist. So I have that aspect covered... at least you do not work with a complete * beep * if you jump here.

    I thought about it. I did a search on google for the specific message I saw in 'wi - fi tools' (which was "no longer valid"ip address ") and found this thread...
    http://supportforums.BlackBerry.com/T5/other-BlackBerry-smartphones/IP-address-no-longer-valid/TD-p/...

    The second post there (from wiggler), gave me the fix I need.
    Thank you!  :-)

  • ACT 2000 and BB CURVE 8330 blackBerry smartphones

    I just bought a BB Curve 8330 and I use ACT! 2000. is there a way to SNYC these 2?

    Act 2000 not supported in new versions of BlackBerry Desktop Manager. In order to synchronize the law 2000 with BB 8330, you must install BB Desktop Software 4.2.

    Try it, it should work. You can download the application on BB site: https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=TlX0RYiWUNQ16A4E9VH47g*.

  • Switching devices blackBerry Smartphones using the Desktop Manager

    I just got my Torch 9800 replacement since my first only the battery was drainning (apparently a common problem).

    Until I returned my old Torch 9800 I backed up and also used the device switch option in Desktop Manager. When it asked me to connect the new device, I unplugged the old camera, he took to the shop orange and then plugged my new camera.

    Then an error has occurred and asked me to update the software on the new device. I did it... and then when I use switching devices, it asks me to connect the current device but the problem is... I don't have the camera more.

    As I backed up all the data, I did a restore. He restored most of the data, but it has not restored my apps.

    Any idea on how I can do?

    I hope it is interesting all that.... and I get a better battery life this time!

    Hi and welcome to the Forums!

    Ah... never mind. While the device switch Wizard can indeed move a few apps, the backup/restore process does not have applications. So, in the State you are in, you must go to the source of your applications and re - get them. If you by AppWorld, the process is very smooth:

    • KB17625 How to install or transfer has already purchased apps from BlackBerry App World for BlackBerry smartphone

    If you have from other sources, then you should see if these sources are a simple way for you. I hope you have good record of all your activation keys... and some will indeed have to be regenerated some developers to attach the key on the BB SPINDLE, which is now different since you have a new device.

    Good luck!

  • BlackBerry Smartphones using Desktop Manager with two BB?

    Hello

    I have a laptop of Desktop Manager 4.7 v already and a Curve 8900 and I synchronize my Outlook contacts and calendar between the laptop computer and the curve.

    I use now a separate BB storm 9500 that I also need to synchronize. Desktop Manager can manage two devices?

    Hi and welcome to the forums!

    The software uses the PIN as a unique identifier for the BB.

    So yes, you can use two. Make sure when you back up the devices you

    have a pattern of naming in place to ensure that. IPD file belongs to

    the curve and the storm. Or you can store them in different directories.

    Thank you

    Bifocals

  • The removal of the Blackberry Curve 8350i blackBerry Smartphones email accounts

    I can't receive e-mail from my personal account, how to remove an e-mail account of my BlackBerry smartphone?

    First try to remove them from your personal email configuration, of the BlackBerry device. You should have a Setup icon.

    If not,

    http://www.BlackBerryFAQ.com/index.php/How_to_add_/_delete_email_addresses

  • BlackBerry smartphones help on 9320 BB curve?

    Hi all! I just bought my first BB yesterday. as mentioned earlier it's a curve 9320. And I have NO idea on how to work things. so, I would really appreciate the help.

    First of all... I also have an ipod so I have itunes and a whole bunch of songs on my itunes playlist. so, I installed the BB desktop software and read that I could transfer my reading list. When I clicked on sync music it says this:

    "Your media cannot be synchronized. Your support has storage of identification to media sync. "examine usind a media card with your device.

    can someone please tell me a method step by step on how to add music? and find out about what a multimedia card is?

    second of all... me and my brother both got the curve BB 9320. When I scanned it his bbm barcode, it worked then, said 'pending approval', but he did not get any warning about how to accept me as a contact on bbm. If someone could also please tell me a step by step on how to add AND method to accept contacts on bbm?

    Thank you very much. This is my first blackberry, so everything is pretty confusing to me, I would be eternally grateful for the help!

    Thanks again

    A card is a memory card that allows you to save files including pictures, music, etc.  You must use a card large enough to hold the amount of music that you want to synchronize.  It is a microSD card and the device supports up to. 32 GB card.  Be aware that you cannot transfer music from itunes.  Music protected by DRM will not ln any device other than an ipod.

    Like bbm flr, you should make sure that at the. CJU have all two BlackBerry data plan with your carrier.

    John

  • Curve of blackBerry Smartphones 9320

    I got a BlackBerry Curve 8850 and I upgraded to a BlackBerry Curve 9320.

    I received the email on my BlackBerry 8850.

    I can not access e-mail on my BlackBerry 9320.

    I have the installation menu asked me a password "Activation".

    Can you please help?

    Thank you.

    Email to my Blackberry Curve problem has been resolved by contacting my carrier, Vodafone.

    Thank you.

  • BlackBerry smartphones using the Micro SDHC 8 GB in Curve 8330

    Hello

    Is someone using a Micro SDHC 8 GB card in their Verizon Blackberry 8330?

    I can't seem to get a straight answer on whether or not it will work.

    Thank you

    Currently, smartphones BlackBerry running the following versions of BlackBerry® Device Software will support until the displayed size.

    BlackBerry Device Software Media card size limit           

    BlackBerry Device Software 4.2.0 up to 2GB

    BlackBerry Device Software 4.2.1 up to 4 GB

    BlackBerry Device Software 4.2.2 up to 4 GB

    BlackBerry Device Software 4.3.0 up to 8GB

    It should work. However, some people complained that the 8 GB cards were hit or miss. I hope that support will be better with the next version of the operating system.

Maybe you are looking for

  • Charge the iphone 7 when using headphones

    Am I missing something, or if I get the iphone 7 this means I can no longer listen to music on my headphones and charge the phone at the same time?

  • Satellite R630 - monitor problem

    I have a SATELLITE R630-13R. When I start my computer the systems sound works but the display to load the toshiba and windows splash pages, then remains empty. If I open in safe mode, the light is very good. When I attach an external monitor, I can s

  • Overheating Satellite P105-SP6022

    After installing windows 7 fireplaces are no working properly.When I enter the configuration if they do but when I boot win7 stop working. Help, pleaseThank youAquiles Pecchio

  • Why the auditor of plug pop up every time I open fire Fox?

    Since yesterday every time I open the Fire Fox the auditor plugin mozilla loads in a tab (in addition to my home page set). How can I disable this?

  • Prevention warning 66030

    I could use some serious help. I have a problem that I couldn't solve after more than 30 hours of attempts. I have a cRIO 9082 with 2 EtherCAT expansion chassis filled with NI 9236 strain gauge modules. The two chassis are running the FPGA code that