Custom LED model

Similar Questions

• I have problems with of the Subvi after the use of customized device model

  I used to start my machine personalized customized device model and I got success in the deployment until I started to do more complicated the Subvi.   I am currently trying to convert low FPGA and high ticks to the duty cycle, but for some reason when I add it to the RT VI "Data read of HW" driver, it seems to cause a downtime... ideas? Is a circuit agree? I have added a time delay but I am still having problems. It is a device online, so I'm suspicious of it hogging resources, but am not sure.

  Attached images are meant to be read like this:

  1. the case of the RT pilot ReadDataFromHW

  2. it's the Subvi calling ToDutyCycle SIMStimPWMSubVI

  3 ShiftRegister.PNG is inside the Subvi.

  As a robotician I celebrate early and often (usually by a failure or two...), but it seems that the answer was to transform fundamentally the While loop for a loop with a count of 1 and then remove the additional elements to ensure that each shift register has that one and then right click on the shift registers and convert at the Feedback node...
  I was able to deploy to VeriStand as a custom device and it runs and calculates the factor of use with no problems. WOOHOO! Where - what is celebrate button!

• JTable with custom column model and model table does not display the table header

  Hello
  
  I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:
  
  Thanks for your help.
  

  import javax.swing.*;
  import javax.swing.table.*;
  
  public class Test1 extends JFrame
  {
       public static void main(String args[])
       {
            JTable table;
            TableColumnModel colModel=createTestColumnModel();
            TestTableModel tableModel=new TestTableModel();
            Test1 frame=new Test1();
  
            table=new JTable(tableModel, colModel);
            frame.getContentPane().add(new JScrollPane(table));
  
            frame.setSize(200,200);
            frame.setVisible(true);
       }
  
       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
            columnModel.addColumn(new TableColumn(0));
  
            return columnModel;
       }
  
       static class TestTableModel extends AbstractTableModel
       {
            public int getColumnCount()
            {
                 return 1;
            }
  
            public Class<?> getColumnClass(int columnIndex)
            {
                 return String.class;
            }
  
            public String getColumnName(int column)
            {
                 return "col";
            }
  
            public int getRowCount()
            {
                 return 1;
            }
  
            public Object getValueAt(int row, int col)
            {
                 return "test";
            }
  
            public void setValueAt(Object aValue, int rowIndex, int columnIndex)
            {
            }
       }
  }

  Published by: 802416 on October 14, 2010 04:29
  added

  See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
  When the TableColumn is created, the default headerValue is null
  So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).

  It worked:

       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
                  TableColumn col = new TableColumn(0);
                  col.setHeaderValue("Header Title");
            columnModel.addColumn(col);
                  return columnModel;
       }
  

  Published by: jduprez on October 14, 2010 14:09
  Beaten by a fraction of a second!

  Published by: jduprez on October 14, 2010 14:10
  OK, by a split of 17 minutes, specifically: o)

• Custom excel model in Stanalone application path

  Hi all

  I have a problem in the construction of application that includes Report Generation Toolkit.

  So, I use Ms Office express.VI to report who has customized excel template path is defined in this VI

  The problem is when I build the application, the VI can't seem to connect to the path of the model of the target computer.

  Note: I added the dynamic model, NI_Excel.lvclass, _Excel VIs.vi, NI_Report Toolkit.lvlib generation for the project file and as always included.

  The application runs without error. but the Excel report is not generated.

  Any help is highly appreciated

  It's really driving me crazy now

  
  

• Reference Dell PowerConnect 2824 remove connections, odd led models

  Hello

  We are noticed on some of our Dell PowerConnect 2824 switches that our devices are connected to the switch suddenly disconnected.  Our devices are a network of small size with the switch, where we connect up to 12 devices and use DHCP to assign IP addresses to the devices.  We also monitor the network with a Windows laptop.  We have also seen times where the switch itself seems to be restarted and shows amber LED light up successively from left to right on the top row of ports, then return on the bottom row.  I confirmed that we use version 1.0.0.45 software for the switch in question.

  We have also seen situations where all, except one device remains connected, but when trying to reconnect to the device has fallen, it seems that the switch seems to completely ignore the device regardless of the port where we connect to the switch.  We tried other cables, but the problem persists.  It's the kind of behavior that I could wait if the MAC addresses are not unique, but all of our devices have all custom MAC addresses.

  Another issue is that we use a very short lease period of one minute.  I don't know if this will get us in trouble.

  If you need more specific information, I'll try to answer your questions.

  Thank you.

  Bob

  Hi Bob,

  If it happens on several switches it is probably not a problem with the hardware switch. It could be a matter of Spanning Tree where it lacks a Hello and due to the lease really short DHCP is originally from the port to close before it can restore a link. You can try to turn STP or enabling quick link on the ports for end devices.

  Why do you have the DHCP lease on so little time for only 12 aircraft? It would add a lot of network traffic. You can try and have some machines on static IP and see if it still falls these ports.

• Add custom waterfall model

  Is it possible to create your own custom of the Cascade of new BlackBerry Project Wizard templates?

  Models Ecxlipse of stunts are not Open Source, so I think there is no way - but as mentioned previously, you can write your own PlugIns Eclipse

• Custom report model - problem with summary

  Hello

  I've created a report with the custom template.  Everything seems okay except that the 'Sum' section (marked in red below) containing the header entries.  I think, I might have placed the scripts in the wrong places bu tnot able to understand.  What I expect is, the total value of the 9,920.00 show with label - "Total: '."

  

  Only under sections are filled in the template, the rest is blank.

  Line 1 a - model

  <tbody>
  <tr> <th>Receipt No.: <td id="rpt_no" colspan="2">#RECEIPT_NO# <th id="rpt_dt">Receipt Date: <td>#RECEIPT_DATE#
  <tr> <th>Description: <td colspan="4">#DESCRIPTION# </br> #CHQ_DD#
  <tr> <th id="tab_head">A/c.CODE <th id="tab_head" colspan="3">HEAD OF ACCOUNT <th id="tab_head_amt">AMOUNT
  <tr> <td>#ACCOUNT_CODE# <td colspan="3">#ACCOUNT_NAME# </br> #INSTALMENT# </br> #PARTICULARS# <td class="num">#AMOUNT#
  

  Line 2 - model

  <tr> <td>#ACCOUNT_CODE# <td colspan="3">#ACCOUNT_NAME# </br> #INSTALMENT# </br> #PARTICULARS# <td class="num">#AMOUNT#
  

  Front lines-

  <div class="report-1" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#">
  <table>
  <tr>  <th id="comp-name" colspan="5">&G_COMPANY_NAME.
  <tr>  <th id="comp-adr" colspan="5">&G_COMPANY_ADDRESS.
  <tr>  <th id="comp-adr" colspan="5">&G_COMPANY_PHONE.  &G_COMPANY_EMAIL.
  

  After the lines-

  <tbody class="uReportPagination">
        #PAGINATION#
    </table>
    <div class="CSV">#EXTERNAL_LINK##CSV_LINK#</div>
  </div>
  

  Please let me know how to solve my problem.

  Thank you and best regards,

  -Anand

  anand_gp wrote:

  And Yes, it is built in formatting of column sum-

  Who does not work with a named column template customized. You must calculate the sum in the report query and place the result in the report by using another conditional model.

  See the sample application I've created in your workspace apex.oracle.com.

• Trouble FDMEE download of custom mapping model

  I am trying to create a classic download custom maps, similar to that used in "FDM", but can't seem to get FDMEE (updated 500) in order to treat it.  I can use the model as it is downloaded from FDMEE, but it's a complete mess.  I created a range named 'ups' exactly similar to the model downloaded "upsMAP" range... without success.  Anyone try this yet?

  I figured this out - the file must be at least of Excel 97 - 2003... My Excel was failing to Excel 95-97, and it was the cause of the failure.  Other than it's the same as classic... a new name of DataLoadRule column has been added.

• How to make my profile Page in Custom Page model

  Hello Experts
  
  We created a custom in webcenter PS3 page template. The model has a "goLink' called 'Profile' with
  "Href: / webcenter/spaces/page / + my profile."
  
  Problem: when we click on the link, it renders (displays) profile in the seeded page template page for example 'WebCenter spaces Top Navigation. "
  
  How to get the 'My profile' page in the custom page template?
  
  Help, please.
  
  Concerning

  Hello

  There is a way that we used to render the page my profile in our custom page template.
  Here it is:

  Use the following URL:
  http://<:port-if-required>/webcenter/faces/oracle/webcenter/page/scopedMD/s8bba98ff_4cbb_40b8_beee_296c916a23ed/businessRolePages/MyProfileMainView.jspx?wc.contextURL=

  : the host name where webcenter is installed.
  <:port-if-required>: If the spaces are accessible via the port, mention it here.
  : for example: / space/myspace (instead of myspace, specify your name space... If the page template is applied to several spaces that mention this: #{spaceContext.currentSpaceName} for the current space)

  The above url works with 11.1.1.4 and 11.1.1.6.

  Hope I said clearly. If it helps please mark my post correct or useful.

  Kind regards.

  Published by: khuishaque on July 3, 2012 15:34

  Published by: khuishaque on July 3, 2012 17:18

• My custom & sounds model desktop theme get screwed up everytime I reboot

  WinXP Pro, SP3.  I deleted all the files, index.dat... including those in system32 & profile system.  I use a classic desktop theme.  Whenever I have restart now, it's a cross between classic & Office XP.  I also lose my sound scheme.  I right click on desktop, choose Properties/themes.  Next, I need to change a theme, I want & then change it back.  I must also go to the configuration/sound Panel & return to my sound scheme.  Of course, I screwed up.

  I've already restored a full backup that occurred before I messed up, but that did not help.  What can I do to fix this?
  Thanks, Phil

  Thank you, Slim.  It didn't work, but it has led me to the correct answer.  I already had my computer configured for optimal performance.  It seems that my desktop theme is not fully restored when I reboot.  I just saved my correct parameters with a new theme & now Windows will start to that.

• LED model

  LED.setState (LED. STATE_PATTERN); Apple becomes exception IllegalArgumentException. Have no idea why?

  I found his solution

  no need to use setState (LED. STATE_PATTERN); use simple setColorPattern() nothing else.

• Special characters on Custom XSLT model cause error when printing PDF

  Hello

  Environment:

  • Request Express 4.2.5.00.08
  • Database 11g Enterprise Edition Release 11.2.0.4.0
  • WebLogic Server Version 10.3.6.0
  • REST (ADR) 2.0.10.289.08.09 Oracle data services
  • Altova StyleVision Enterprise Edition 2016 sp1 version

  I created a presentation of the State using Altova StyleVision and XSLT version 1.0. So that the model works, I had to manually remove several special characters in the generated .xslt file; some of them added automatically by the software (for example & #160; and & #x200B ;) and others were part of my model (p. ex. & amp;).)

  After producing a work plan, I decided to put back the original ampersand (&) I removed the template of the header which is a plain text:

  <xsl:text>A & B</xsl:text>
  
  

  However, I have tried many solutions I found on the web and all of them produce an invalid PDF. Here are some of the approaches that I tried and none of them worked:

  <xsl:text>A &amp; B</xsl:text>
  <xsl:text>A <![CDATA[&]]> B</xsl:text>
  <xsl:text disable-output-escaping="yes">A & B</xsl:text>
  <xsl:text>A &#38; B</xsl:text>
  
  

  Does anyone have an idea or a suggestion to solve this problem?

  Thank you

  Erick

  The APEX motor is making a number of substitutions with the layout of integrated report. Depending on how you generate your PDF documents - and I guess you try this via the printing API, you must perform some of them in your own code, try the following, hope it solves your problem:

  '%' => '%25'

  '<' ==""> ' % 26lt;

  ' > ' => ' % 26gt;

  '&' => ' % 26amp;

  Kind regards
  Marc

• Creating vCloud org with lease of storage Maximum strategy custom - VAPP model rental contract.

  Hello guys!

  I'm working on the use of the Orchestrator to activate the automatic configuration and customization of the vCloud.

  My problem (I hope), remains the policy setting of the organization that is:

  VAPP model lease:

  Rental maximum storage (30 days)

  It's the default, and apparently, the example of a workflow for the creation of an organization, has no way to change that!

  I'm talking about this piece:

  var leaseSettings = System.getModule("com.vmware.library.vCloud.Admin.Organization").createOrgLeaseSettings)
  storageLeaseHours,
  deploymentLeaseHours,
  deleteOnStorageLeaseExpiration);

  Apparently, the deleteOnStorageLeaseExpiration affects only storage cleaning: (move for expired items or permanently remove) - but not the lease of storage Maximum setting

  The research of the library API, I found this and tried to do something:

  var myVclOrgVAppTemplateLeaseSettings = new VclOrgVAppTemplateLeaseSettings();

  myVclOrgVAppTemplateLeaseSettings.storageLeaseSeconds = 0;

  myVclOrgVAppTemplateLeaseSettings.deleteOnStorageLeaseExpiration = deleteOnStorageLeaseExpiration;

  However, when trying to use it in createOrgSettings, I get exception:
  Cannot convert com.vmware.vmo.plugin.vcloud.model.schema.objects.OrgVAppTemplateLeaseSettings@731305e9 in com.vmware.vmo.plugin.vcloud.model.schema.objects.OrgEmailSettings (name of the dynamic Script Module: createOrgSettings #17)
  How I don't use this, in order to customize the attribute of lease of storage Maximum for the policy of the Organization? It is not very clear...
  Thank you!

  Screenshot help SOOO much I understand now...

  Well, working with the Org object alone won't get you where you need to go, you will also need to get the Organization Admin object

  var adminOrg = myOrgObject.toAdminObject ();

  now, with the adminOrg, you can call the method 'updateSetings' with a 'VclOrgSettings' object passed as parameter...

  var orgSettings = new VclOrgSettings();

  Look on the object VclOrgSettings in the Explorer in the api to find available properties - one of them is that you need: "vAppTemplateLeaseSettings" - so that the code you created will go here...

  In view of the foregoing...

  Create the Org as you're... Once you have the org created, the admin object so that org and update of the vAppTemplateLeaseSettings as you wish

• Custom validation model

  Hello
  
  I have the problem with the validation model.
  
  Order Management Super User-> Configuration-> rules-> Security-> Validation models
  
  I did the clean validation model. It's the same thing as 'regular line '. I have run that tools-> create validation packages. After that, I go to the order management Super User-> Configuration-> rules-> Security-> constraints of treatment and I did own constraint. My new constraint gives new version number in the sales order. When I put my own model validation this constraint does not work. When I put 'Regular line' it works fine and I have the new version in the sales order. I run generate constraints validation packages but my own models of validation does not work.
  
  Where can I see the package with my own validation model, because I fear that asking 'Create validation packages' does not generate it.
  
  Kind regards
  Luko
  
  OeBS 11.5.10.2

  Hi, Josée.

  All generated validation packages live in the apps schema. The best way to get the name of your package's of the column validation_pkg in the oe_pc_validation_pkgs table. The format is:

  OE_ {+} a + PC {+} b + _ {+ c +} _ {+} d +

  where:

  a = the validating_entity_id
  b = the validation_entity_id
  c = the short name of entity validation (LINE, ORDER, BLKTHDR, HDRADJ etc..)
  d = the short name of model validation (i.e. the short name you used when defining the model)

  Kind regards
  Jon

• How to integrate model of custom device controller

  Hello

  I now live a labview including 18 sub controller model, and I am trying to run this controller on RTOS VxWorks, through customized device model.

  1. when I tried to run a model simple controller (ex, a controller with 3 ~ 4 void / screw) on RTOS VxWorks, I just put simple controller in RT Driver.vi model, and then the build and deployment succeeded.

  2. then, I did it with my model of labview in the same way above controller, but I couldn't even build my model controller labview. I don't know why, but the build process stops at the initialization stage. I think that this problem will appear when there are more than 3 ~ 4 sub vis are added under the custom device project.

  Any ways to use a model of controller labview instead of just put a model in RT Driver.vi?

  Now, I managed to build my model labivew, I saw the light of the compactRIO blinked, which measn the connection is ok by CAN - Bus.

  But it's still weird and not possible to build my model at a time. In addition, cannot again build the custom devcie just before successfully built after the addition of two functions simply.

  In any case, the solution to my problem is as below.

  For example, my cruise controller written in labview consists of 3 simulation systems arrive.

  Each system to arrive includes several subsystems.

  First, create the model after adding one of 3 major subsystems. (In this case, I never had errors in the construction of models of labview)

  Secondly, if the first step is ok, add one of the other 2 systems come in the custom device and then build again.

  Thirdly, add the remaining subsystem in the custom device and establish the entire model and deploy it to the target.

  With three steps above, I can still build devices customized successfully.