Custom reports of IRR do not copy

Similar Questions

• VI customer reports VMware Tools 'does not work '.

  Hello people,

  It becomes very annoying. He started to arrive since I upgrade ESX server with U2, U3 and Vcenter Server of U3 U4.

  The problem is: from time to time, VI client, the State of the VMware Tools on different virtual machines (distributed on both ESX hosts) indicates "does not work". Can I open a session on the VMS, restart the VMware Tools service, then VI Client displays "ok". I wonder what causes this problem and ready to solve this problem.

  I apprecaite your help.

  Thank you.

  Have you seen this post from Jason Boche?

  Systems Administrator & virtualization architect

  http://technodrone.blogspot.com

• Not able to see my custom report

  I have created custom and follows things reports
  
  1. creates a SP
  2. created REP table entry
  3. updated the label below 3 files to
  D:\IDM\server\xellerate\OIMApplications\WLXellerateFull.ear\xlWebApp.war\WEB-INF\classes
  xlWebAdmin.properties
  xlDefaultAdmin.properties
  xlWebAdmin_en_US.properties
  4 reboot a server
  
  I'm still not able to see my custom report

  You have assigned the report to the appropriate group? Click on Menu-> groups-> Group-> Menu Item (drop-down) > assign (or) allowed reports and select your report.

  Check http://docs.oracle.com/cd/E14049_01/doc.9101/e14045/reporting.htm#CEGGCHII Section: 5.4.3.3 providing a group of users have access to a report

  -Marie

• Custom reports do not work with error message: systematic FDPREP can not read...

  Hello
  
  Can someone help me with this problem pls?
  
  Dev system is cloned production a few days ago. After you run the clone of post procedure, the dev works very well except when we try to run customized reports he errorred out with the Routine FDPREP - error message cannot read the file fmis/11.5.0/reports/US/POXPRPO1.rep. I checked the files env, and they seem ok. $CUSTOM_TOP is set to the correct value. Other standard Oracle reports properly. Custom report file extension is in the case of low (RDF). I tried to compile the report manually by using rwcon60.sh, the rep file was created under this folder but simultaneous Manager always gives the same error message. So I'm suspecting whther this is the problem of path, from the error message we can see up there, it does not show the absolute path. Can someone pls throw some light on this for me?
  
  Thank you!
  Liang

  If everything is as it should be, would it be possible to bounce the instance (all services, listener, and database)? Who can solve the problem, but he will not explain how it happened in the first place. If the bounce does not solve the problem, then FMIS_TOP is not set correctly.

  HTH
  Srini

• Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Of course, not as the sorting, the viewer sees is defined by them not by you - given the same USB you can use the finder to display in alphabetical order, last updated order etc. size - files have no command - the viewer defines the order

  You can select Photos and export using a file for sequential access to export name so if the Viewer uses an alpha sort they correspond to your order desired - you can facilitate this, but they must define their queue viewer correctly for them to see it as you wish

  LN

• use custom reportgen file but do not touch original

  Hello everyone,

  Sorry if someone else asked previously.

  Is it possible to use a reportgen_txt.seq modified under another name so not to disturb the original file?  If so, how can I tell the client that I want to use the NEW file changed the file to another name?  I'm looking to create several custom report files to use with many different Client files.  The goal is to keep all my customers unique once I create a deployment.  That way if for some reason, the software must be reinstalled it will not overwrite the file reportgen_txt.seq that someone else modified it, making it so easy installation process, then ask someone to get into the environment and ask them to do it manually.  Also is there a way to associate this custom in the Clients directory file?  Thank you in advance for any information you provide to help me better understand this package

  The package of serves is TestStand 2010.

  Kind regards

  Scott

  Hello Daniel,.

  I found a way that works for me with respect to the subject ReportGen.  First, I changed the setting Report Options to what you suggested a few more.  The line of my customer file has been updated as follows: Parameters.ReportOptions.Format = 'IO' + '.txt' and my updated ReportGen updated file has been renamed as: "reportgen_IO.txt.seq".  The final result gives me about what I'm looking for.  That way I won't have to worry about move the reportgen file in the client directory.

  With regard to the second question: Yes, I really should create another thread for it.  I of course only after the fact.  I have a work around that involves manual labor of the person who installs the software as a readme.txt statement.  I'll look at the information you published and start another thread with more information, if I do not find something before hand.

  Thank you very much for the information you gave me.  Its much appreciated.  It contributed to my education process to better understand the TestStand software environment.  Thank you for pointing me to the finger in a positive direction.

  Kind regards

  Scott

• I have a c4700 printer. It analyses, but it will not copy or print from the computer

  I have a C4700 printer.  Have no trouble scanning.  It will be not copy or print from the computer.  Please help me if you can.

  I have a C4700 printer.  Have no trouble scanning.  It will be not copy or print from the computer.  Please help me if you can.

  Hello

  You will have to contact HP support for this problem.

  Make sure you have the latest drivers and software installed.

  Printers and multifunction:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=18972&h_page=hpcom&cc=us&lang=en&h_client=S-A-R163-1

  You can also ask this question on the HP Support forums.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/PSG/?category.ID=inkjet

  Or, contact HP support.

  Call Support and Service the customer of HP Officejet Pro 8500 has e-All-in-One Printer - A910a:
  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&lang=en&LC=en&product=4083969&x=5&y=14

  Concerning

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/

• All OfficeJet5610v in a HP: HP printer will print but not copy

  HP printer will print, but not copy.  This computer printout, will be printed over the clouds, will analyse and will fax, very well. However, he suddenly stopped making copies. The scanner bar through the glass and lights, but he won't have a copy. All pages Gush in white.

  Hello @MTAI,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of copies in white that you encounter during the copy of your HP Officejet 5610v all-in-One Printer. To be honest, this problem looks more because of printing system, rather than a failure of the copy. The reason is because the copy uses the same exact material like scanning components. Because you are able to scan without problem on your computer Windows 8.1, we know that copy/scanning mechanism works within your printer. However, when you print from your computer, if the document is sent to your printer as a file of type 'image' the ink color is used to 'do' or 'enrich' the black ink. Therefore, your machine may be appearing in print in fine black ink of your computer, when in reality, it's just the color ink making the black color. When you copy from your printer, if you decide to make a copy of only black ink black will be used. If you choose to make a color copy will only color ink. To check if the cartridges and the print in your printer system working properly, I'll make you start troubleshooting by a quality diagnostic report print to your printer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Make sure the product is on and not used, plain white paper loaded.
  2. On the Control Panel, support on * and #, then press 1, 2, and 7.
  3. Press the right arrow key () until the reports displayed on the control panel and press OK.
  4. Press the left arrow button () until the vpp self test displays on the control panel and press OK. The test page will print.

  

  • (1) printed by the right cartridge
  • (2) printed by the left cartridge
  • If this report print with color and black: that the problem you are experiencing is not caused by your printing system. On the contrary, there may be a problem of programming that takes place within your printer which is originally the function copy to fail, while the scan function continues to work. Can I please have you check on your computer that your scan function always works right now.
  • If this report prints with lack of color or lack of black ink: that the problem you are experiencing is actually caused by a conflict of printing system in your printer, rather than a failure of the copy. To solve this problem please can I you click here. Once the support document opens, please run through the second step, step 3, step 4 and step 5. This includes measures void under the steps listed to complete. Once the troubleshooting is complete please try to copy again.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Custom report

  I want to create a customized report detailing Top Conversations for each of my network devices together. However, I want to exclude a certain application.

  Is there a way to filter this particular application? We use an application on our computers that connect to our phones. The SIP application is clogging my report and make the report Top Conversations not as useful as it could be.

  Advice would be greatly appreciated.

  Thank you

  -Evan

  Hey Evan,

  It is impossible to fliter on this request in the report, unfortunately.

  Mario

• Upgrade to Windows 7 Ultimate and highway 2010 receives the error: "your registry settings for this application no were not copied correctly."

  I updated from XP Pro to Win7 Ultimate.

  When I try to install Highway 2010 (that I had before) I get the following message

  "Your registry settings for this application were not copied correctly. To correct these settings, run the installation of this application from the location where you originally installed it. »

  I tried the suggestions without success. So what do I do to fix this?

  I have found since that when I uninstall several files are missing, 41ce1.rbf & 41d81.rbf are later. It seems that highway will not properly work without their files (I guess here).

  So where they are or how can I get the.

  I get the same problems when I try to install Highway 2011 test, I don't buy the full program so the custom of trial run.

  Chris Townsend

  Now, I know the .rbf files are files of Roll-back.

  Hello Lrchr,

  Your question would be better addressed in the highway, streets and trips and MapPoint.
  Click here for a link to repost in the forum of the highway. They will be better able to solve your problem here.

  I hope this helps.

  Marilyn

• HASH value in a custom report

  Hello

  I created a custom report for Top SQL on a monitored by Foglight Oracle DB. During the creation, for the input data, I check the HASH value. OK, it shows HASH values, but the format is not identical to the database.

  In the database, I have for example 432647

  but in Foglight report I 45 M or 67G.

  I am amazed. What is the problem with my report?

  Thank you.

  It looks like an inappropriate rendering engine has been configured for this area of the custom report. Did you leave the default rendering engine? If so, try some of the other converters and see if you get a better result.

  Kind regards

  Brian Wheeldon

• supermetrics & vcops custom report

  Hi all

  I have a custom report in which I show a Supermetric.

  How can I do?

  The supermetric does not appear in the describe.xml file and its definition can be found in the database of the user interface.

  So, how can I put the supermetric in the user_ciq_metrics_collected.xml file?

  Thank you

  IG

  Unfortunately, this is not a very easy and simple process. But here's what you can do.

  Transfer Super-metrique involves the following steps:

  • Create package great metric attribute and assign it to the resource type. For more information about the metric development super pls. refer to the documentation of great metrics available in the custom user interface.
  • Ensure that the metrics super created appears in the section "all measures".
  • Find great key of DB alivevm metrics.

  (You can use the following address to execute DB queries: https:///vcops-custom/dbAccessQuery.action)
  select distinct attr_key from attributekey ak,resourceglobalkey rk where ak.attrkey_id=rk.attrkeyid and rk.supermetricid IN(select id from supermetric where name LIKE '%XXX%');
  

  • Update the file user_ciq_metrics_collected.xml in the Analytics and the UI VM using the great metric.
  • Create the xml file using the great metric to generate customizable view/report.

  Let us know if it works for you?

  Thank you

  Alex D.

• SSRS / Custom reports - see the error model

  Hello

  There is a problem in the custom report module (SSRS), the reports were works in version 6.0, but we get the error on the same report 6.1.

  When we tried to bebug the problem, we have found that the custom viewmodel used in the search for the EQT question.

  For example the model EQT visibility does not work.
  Example:

  < Type ParameterType = "PkgSpec" webControl = "ReportingControls/EQTInput.ascx" >

  < model displayVariableIndex '1' = > SearchableView:Config:ProdikaSettings/EQTConfiguration/GSMsvSearchableMultiSelectViews, PackagingSpecViewSingleSelect < / template >

  < / ParameterType >

  Error information:

  Object reference is not set to an instance of an object.

  Description:
  An unhandled exception occurred during the execution of the current web
  request. Please review the stack trace for more information about the error and
  originated in the code.
  
  Exception details:
  System.NullReferenceException: Object reference not set to an instance of a
  object.

  
  However, a different point of view model works fine 6.1 and 6.0:

  < Type ParameterType = 'Installation' webControl = "ReportingControls/EQTInput.ascx" >

  < model displayVariableIndex '1' = > SearchableView:Config:ProdikaSettings/EQTConfiguration/PQSSearchableMultiSelectViews, FacilityViewSingleSelect < / template >

  < / ParameterType >

  Wait for the viewmodel change there is no difference between these two configuration of custom report, please let us know, how to solve this problem.

  Kind regards
  Kumar

  Thank you Ivy for us help. We have finally solved this problem, because others benefit I he explains here. Let know if any additional question,

  a. the personalized view eqt file was missing and that we compared and added the custom view

  b. looks like that view reference for custom eqt rose from prodikareporting to webcommon in version 6.1. So, we have updated this reference

• How to make the PDF text field to be strikes do not copy/paste from previous text fields?

  Dear friends

  Helps to solve a problem related to the fields of PDF text, please

  Is there a way to make a PDF of the respondent, which ends of fields text to type own text not copy/paste of the previous text fields?

  Thank you very much!

  Copy the following code, used as key event custom field of your field, will prevent to enter more than one character at a time, which means that copy it text from an external source is not possible:

  if (event.change.length>1) event.rc=false;
  

  However, you can inform your users of this restriction, or they think that something is wrong with the file.