custom scheduled task link

Similar Questions

• How to manage the timestamp custom scheduled task, written for target recognition

  Hello
  
  I wrote a custom users reconciile system scheduled task target... but whenever I run the scheduled task to target Recon... it generates the Recon. events for all users.
  
  How to handle this... How to pass the timestamp value to custom target Recon scheduled task.
  
  Thank you
  Patricia

  That is why ignoreEvent() API is provided in the interface of the IOM.

  But he does this method comapare ignoreEvent() values with IOM user profile user or users process form values?
  Yes, it works for both. The input of this API argument is the name of the resource object and the Office of receiver can be approved / target you created. SO for your resource target reconciliation, it works for you.

• How to upgrade a custom scheduled task setting?

  Hello

  I develop a scheduled task that has a setting called 'Last Run Timestamp'.  I want to this field allows to limit my reconciliation events to those that happened after the timestamp of last Run.

  From my java code, how can I change this field with sysdate/time stamp of the last race?

  I'm running on IOM 11gr2ps2.

  Thank you

  Khanh

  Example of Code using SchedulerService.

  SimpleDateFormat time = new SimpleDateFormat ("yyyy-MM-DD hh: mm: zzz");

  Start date = new Date();

  LOGGER.log (Level.INFO, "start time:" + (start) time.format);

  Update the Timestamp of scheduled task setting

  JobDetails job = getSchedIntf () .getJobDetail (getName ());

  HashMap attributes = job.getAttributes ();

  JobParameter = attributes.get ("last Run Timestamp") jobparam;

  String timestamp = (time.format (start));

  jobparam.setValue (timestamp);

  Attributes.put ("last Run Timestamp", jobparam);

  job.setAttributes (attributes);

  getSchedIntf () .updateJob (job);

  -Kevin

• The custom Scheduler task parameters

  Hello experts!
  
  I am trying to create a task scheduler which extends the SchedulerBaseTask class. But I do not understand how to deliver my task with settings, so I need some advice. Should they be in init() metod? Or I can initialize them in execute (params HashMap) as I did with extension oracle.iam.scheduler.vo.TaskSupport?
  
  Help please.

  11 g, you extend TaskSupport class. So, you see excute(HashMap map) method in which you write your logic.

  You can simply get your map attr as I told you above

  But if you use IOM 10 g then you extend the class ScheduleBase where you will find the execute() method and then use getAttribute

• Clone a virtual machine / move to folder / delete VM / as a Powershell Script as a scheduled task ends with "ongoing"

  Hi all,.

  I would kindly ask your help with a script that needs to run as a scheduled task. It is functional, but does not correct and little need for love at the end...

  I want to create a script that

  • find a virtual machine with a pattern on its behalf (realized and works)
  • delete a virtual machine with a reason given in his name (completed works)
  • create a clone of a virtual machine (completed works)
  • move that created clone (upstairs) and move it to a folder named (open)
    or the fact in the clone process
    
    

  I realized thus far:

  Add-pssnapin VMware.VimAutomation.Core
  # Import CSV backup
  $backupinfo = import-Csv C:\scripts\vm_backup\test.csv
  VCenter servername #Set
  $vcenter_server = "name servers".
  #Connect to vCenter
  SE connect-VIServer $vcenter_Server

  # BEGIN OLD BACKUP CLEANUP
  #Select all old backups
  $old_backups = get - VM *-backups
  {if ($old_backups)}
  {foreach ($backup_vm to $old_backups)
  Get - VM $backup_vm | Remove-VM - DeleteFromDisk-confirm: $false
  }
  }

  # START QUEUING NEW CLONES
  #Increment through CSV
  {foreach ($customer to $backupinfo)
  $target_host is get-VMHost-name $customer. TargetHost
  If {($target_host)
  Date format #Set for clone names
  $date = get-Date-Format 'YYYY-MM-dd ".
  Date format #Set for emails
  $time = (get-Date - f "Hh: mm")
  #Get SourceVM
  $vm is get - VM $customer. SourceVM
  # Create new snapshot clone
  $cloneSnap = $vm | New-Snapshot - name "instant Clone.
  # Get the managed object display
  $vmView = $vm | Get-View
  # Get the managed folder object reference
  $cloneFolder = $vmView.parent
  # Construction specification clone
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec
  # Make linked disc specification?
  $cloneSpec.Snapshot = $vmView.Snapshot.CurrentSnapshot
  #Set VirtualMachineRelocateSpec
  $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec
  #Thin commissioning
  $cloneSpec.Location.Transform = [Vmware.Vim.VirtualMachineRelocateTransformation]: sparse
  #Target data store
  $cloneSpec.Location.Datastore = (get-Datastore-name $customer. TargetDS | Get - View). MoRef
  #Target host
  $cloneSpec.Location.Host = (get-VMHost-name $customer. TargetHost | Get - View). MoRef
  #Target list of resources, from the first VM in the TargetHost
  $cloneSpec.Location.Pool = (get-VMHost-name $customer. TargetHost | Get - VM | Select-Object - 1 first | Get - View). ResourcePool
  Name of clone #Set
  $cloneName = ' date of $vm-$- $temps - backup ".
  # Create clone
  $clone_task = $vmView.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)
  # Remove snapshot created for clone, will automatically queues
  Get-Snapshot - VM (VM-Get-name $customer. SourceVM) - name $cloneSnap | Remove-Snapshot - confirm: $False
  }
  }

  # Move folder in VM Clone
  Move-VM - VM * - backups - Destination Clone

  VCentre #Disconnect
  Disconnect-VIServer-confirm: $false

  The script itself runs so far and does what it should, but the scheduled task is always "in process of execution". Now, I created a work around in this way, I have finished the task after two hours of running; but there must be a better solution that works properly.
  As well as the part with the rise of the virtual machine.

  Could you maybe help me or have a good idea how to solve this problem?

  Thanks in advance

  Try again with

  PowerShell-no interactive - noprofile - executionpolicy override - file C:\scripts\scriptname.ps1

• BITSADMIN and scheduled tasks

  Does anyone have experience making bitsadmin more useless in a scheduled task?  It seems to be limited to the use of the command-line connected except for the / create command.  Otherwise, it fails because the user is not connected (will work even if at the request of task if you logged in and 'run now'), but when you are disconnected, the task runs but bitsadmin gives errors like:
  Cannot add file to job - 0x800704dd
  The requested operation was not because the user is not connected to the network.

  The specified service does not exist.

  This behavior even in Xp and S 2008 / Vista.

  Directors Exchange

  Hi rgaysa,

  Please use the forum answers of Vista,

  The question you have posted is related to a network environment and would be better suited to the TechNet community.
  We are only Vista support for the consumer.  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of 'Scheduled task': status "could not run.

  I checked "Troubleshooting" to schedule tasks and noted the recommended action: program /?, but don't know not where/how to open command prompt in the backup utility. What is the right approach to the problem?

  Thank you

  Hi Phil,

  I suggest you to scan sfc and check.
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  If you are prompted to insert a Windows XP SP2 CD when you try to run the. System File Checker tool

  Refer to this link:

  http://support.Microsoft.com/kb/900910

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://support.microsoft.com/kb/322756

  I hope this helps!

• restart of the computer from standby when I press start on the system unit, but not when a scheduled task is started

  Windows XP Professional SP3, updates, motherboard Asus P4P800 series (2006). The original system dates back to 2002, but there have been many additions and replacement upgrade. More recently, 2011, two old hard drives have been replaced (XP had destroyed itself requiring a reinstallation), with a much larger and HD, and the cpu has been replaced by a 3 GHz one.

  I've configured the BIOS to enable the use of standby mode (standby). I wanted to be able to run scheduled backup jobs early in the morning, a little before I wake up normally. The goal was to conserve energy. Whenever I leave the computer for more than an hour or two, I put it in sleep mode. In recent years, that it worked well.

  Scheduled tasks are still, in fact, more surely than ever. But now, when I press the Start button on the system unit, the operating system is restarted rather than restore the State of the system at the time of Eve. This happened almost constantly for maybe a week. I was always a guard never enter sleep mode when I'm aware of any application running who has not completed a requested operation (save a file, defragment a disk, etc.).

  I searched on the basis of knowledge, but not found any problems like that. There has been no hardware changes, no new devices; only change of important software (but it is difficult to see how it might be relevant) was the resettlement of Java Runtime Environment 6.x to support the help of OpenOffice. Although I have not checked, I am reasonably sure that all drivers are up-to-date.

  No idea why this should suddenly become a problem or how to fix?

  Hello

  I suggest you follow these methods and check.

  Method 1: View the steps suggested in the following link.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Method 2: Use the Powercfg.exe utility to restore the default power mode

  You can use the Powercfg.exe utility to copy the power mode of the user by default to the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK.

  2. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Method 3: How to perform the check and clean boot if the problem persists.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  I hope this helps!

• services that run via scheduled task

  Hi all

  I am creating a task scheduled to start/stop services. the scheduled task must be run under the service account with minimal rights, as rights of the user or the user rights of maximum power.
  I created the scheduled task running under the account of service with power user rights to stop a service, but unfortunately the task was doing what it suppose to do.
  I did some troubleshooting and investigated as shown below:
  1. I used the runas command to run net stop under the service account that runs the scheduled task, the service is stopped, as it is assumed
  2. I connect to the server using the account service and disconnected (the session will be shown in the disk for the service account) and at the same time open a session to the server with a different account performed the scheduled task, the task does what it is supposed to do. (the service is stopped)
  Note: the scheduled task is set to enabled (scheduled task to run at a specified time)
  3 when I changed the rights on behalf of rights of administrator power user rights service and perform scheduled task, the task runs correctly and does what he must do.
  4. the service was set to be managed by the user with power, which means that if a user opens a session on the server and try to start/stop the service, he will be able to action and is successful.
  my questions will be as shown below:
  1. to start/stop the service via a scheduled task, the service account needs a session to be able to perform the task?
  2 must. the service account the highest privileges to perform the task?
  3. is there a way to avoid to run the scheduled task to run with minimum privileges? What kind of things need to be done.
  Thanks in advance for your answer.

  I would look at the link below.  This should answer all these questions.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• Scheduled task does not play if already open WMP, trying to avoid manual close

  I'm in a work centre that will make announcements every day on a speaker system that is run by windows media player. I set up a scheduled task to all files that will play, but once the said file is played WMP does not close automatically. This does not seem like a problem, but if nobody closes on WMP, the next scheduled task will not - play which completely defeated the purpose to automate the process and our workers will have to still remember to close WMP 3 or 4 times a day, otherwise nobody gets the announcement.

  I have tried implementing a command line with /play wmplayer start/close c:myfile.wav as an executable file and run it with the Task Scheduler instead of the wav file... it did not work. Namely, the /close function was abandoned with WMP.

  Is it possible that I can continue to use WMP and completely automate this process without the manual close WMP after each scheduled task?

  Hi Rodvold,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forums.

  To change the scheduled tasks in Windows XP, you can also check this link:

  How to modify the scheduled tasks in Windows XP

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Scheduled tasks

  I asked this question in a few forums and no one has yet given me a correct answer, so let me try here:

  What (if any) programs or what should I have in my "scheduled tasks"? I tried scheduling Avast it but has never worked, even with disk cleanup and a few other things. Here's what I have now:

  Apple Software Update (looks like it is running OK, but do I need?)

  Disk Cleanup: never ran

  GoogleUpdateTaskMachineCore (looks like it's OK running, but do I need?)

  GoogleUpdateTaskMachineUA (looks like it's OK running, but do I need?)

  RealUpgradeLogonTaskS-1-5-21-4191468066-1 (looks like it's OK running, but do I need?)

  RealUpgradeScheduledTaskS-1-5-21-4191468066-1 (looks like it's OK running, but do I need?)

  Any help will be greatly appreciated.

  I wouldn't have any of these items in scheduled tasks. You don't need to program Avast - he takes care of himself. If you try to schedule a scan and only have the free version, you will need to buy Avast Pro. What about disk cleanup, here is a link showing how to do a task scheduled for her:

  http://TweakHound.com/XP/tasks/sch_disk_cln.htm

  MS - MVP - Elephant Boy computers - don't panic!

• Scheduled task runs only if connected (W2k3 server)

  Hello

  This was bugs me for a week now: W2k3 server a customer has a problem to launch a specific scheduled task.

  The task calls first on an application that generates files; Excel is open, then a macro is executed, which saves more than some files; Finally, these files are copied to a UNC path to another server.

  -The permissions on all the files are OK (account used is domain administrator)

  -"Run only if connected" is NOT selected

  -But: Excel displays apparently the first home screen whenever it is opened with this account.

  Any advice would be greatly appreciated!

  Hello Quip666,

  Since you are on a domain, I recommend you to repost your question with the professionals at Technet Windows Server Forum where one of the experts in this area would be better suited to offer you a solution. Thankis!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why a scheduled task in Windows 7 is hidden?

  I'm migrating from XP to Windows 7. I moved a scheduled task that worked fine in XP in the Windows 7 environment by recreating the work in the new scheduled task manager calling from the same batch (.) CMD file). In the general tab of the task properties, the hidden checkbox is not checked. The CMD file works normally (visible) if started from a window or explore CMD prompt.

  When the task is started by Task Scheduler, it runs hidden. The CMD window is not visible, and the user interface of the program it's running (a backup program) is not visible. Processes are listed in the Task Manager, and they are run under my username (not the SYSTEM or LOCAL).

  Can someone explain why this task is hidden running, and how can I make it visible?

  Hi timg11,

  All the scheduled tasks run hidden?

  The user interface for Task Scheduler (IU) is a snap Microsoft Management Console (MMC) that replaces the scheduled tasks Explorer extension in Windows XP, Windows Server 2003 and Windows 2000.

  To display hidden scheduled tasks, follow these steps:

  1. click on start. In the search box, type Task Scheduler. Then, in the list programs, click Task Scheduler.
  2. on the view menu, click Show hidden tasks.

  See the link below and refer to the section tasks hidden demand that describes scheduled tasks hidden:

  Description of the scheduled tasks in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/939039

  The above article is for Windows Vista. It remains valid for Windows 7, too.

  If you are having problems scheduling tasks or for tasks to be performed correctly, first make sure that the Task Scheduler service is running. You can check that the service is running if you click on the Start button, select Control Panel, click System and Maintenance, click Administrative Tools, click Services, and check the status of the Task Scheduler service is started.

  See the links below for more details on Task Scheduler and the same diagnosis:

  Overview of Task Scheduler
  http://TechNet.Microsoft.com/en-us/library/cc721871.aspx

  Schedule a task
  http://TechNet.Microsoft.com/en-us/library/cc748993.aspx

  Troubleshooting Task Scheduler
  http://TechNet.Microsoft.com/en-us/library/cc721846.aspx

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• scheduled task returns ox2

  I have a scheduled task that runs perfectly in Windows XP Pro, but the same task in Windows 7 returns a '0 x 2' under 'run last result. " According to the command of the command line, "net helpmsg 2 ', '0 x 2' is equivalent to"the system cannot find the file specified."

  I can probably find the file and the path I use in the Actions tab was checked, re-checked, double checked and triple-checked.

  My task is a * cmd file that initiates a work PC SAS...

  Again, it works fine under XP and I can run under WIN 7, but it does not work on Task Scheduler.  I played with the script without success...

  Hello

  1 are. what script you referring?
  2 where the cmd file that initiates a PC SAS work?

  I you suggest to change the location of the file, delete the scheduled task, disable the security software and then create a task again.

  Step 1: Follow the below mentioned article:

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2: Follow the below mentioned article:

  Schedule a task
  http://Windows.Microsoft.com/en-us/Windows7/schedule-a-task

  If the steps above do not help, you can report the issue in the link mentioned below:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• only scheduled task action

  Hello

  I wonder when a scheduled task is running if it has only the name and action?

  Thanks, Ido

  Hello

  Thank you for choosing to post in the Microsoft community.

  Unfortunately, the question is not clear. The issue to better understand let us know a few things.

  a. What is exactly the question that you challenge?

  b. is the utility of scheduled task does not?

  Check out the link:

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375