Cut a combined EPA 11 video Clips

Similar Questions

• Combine all the video clips in a new clip

  Not exactly necessary for my workflow, but something I'd expect to see. In a main element with many intermittent faults, which I clean, either in the viewer or the timeline, my clips unique original becomes a series of video clips. With this master clip now cleaned, I couldn't want to change in a way that maps the changes done to eliminate imperfections. Kinda like having a $5, $4 1 s and the spare change to raise to $10 and preferring to have a single $10 bill, instead, another handful.

  The manual says no way to do it within the FCE. If I export the standalone series of clips as .mov, QT hit the resolution from 1080 to 720 (no thanks). If I export to QT conversion, the 1080 can be maintained, but the only file that results has its image reduced by 20% (?), surrounding it with black borders. When brought within the CTF, the clip is still listed as 1080. But I still have to resize it with success, as the means for it apparently do not allow borders to trim.

  TIA

  Try this:

  Re: Export in best quality

  Also, check the project properties are what you think they should be.

  Al

• How do I cut the audio of a video clip in PS 6

  I have video clips on several layers in the timeline panel and want to turn off the sound of the specific video clips - they are on video lines, not the audio line

  This will help you: http://forums.adobe.com/message/4328012#4328012#4328012

• How to cut animations characters of a video clip?

  Hey guys,.

  I'm working on a new series of videos, but I don't have a major part to do. How would I cut a picture into a movement of a video altogether? Like filtering, but without the green screen. First can do? Any help/advice would be greatly appreciated.

  Here are a bunch of links for rotoscoping techniques:

  Search community help - rotoscoping

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• Some video clips to cut or freeze altogether when editing in Windows Movie Maker.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • I imported a few video clips for Windows Video Maker and when I played against them on the timeline, they played very well, but when I started working on a project and added the clip on the timeline the clip played to halfway through and then the clip is cut off from himself and played the tree in this way the rest of the clip or just froze altogether but the timer continued. At first, I thought, there might be something wrong with the clip so I imported another copy of the clip, but he kept repeating the same problem with all versions of the clip that I imported. It is not the first time, it does, Windows Movie Maker has done this before with other video clips of mine.

  This is usually due to incompatible source files.

  Might be worth trying to convert your videos to
  format .wmv before import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How do I cut audio from video clips?

  HELP me ok so I video clips with audio in them. all I want to do is mute all the noise coming from the video so I can add something... Please is it possible?

  Hello

  You can use your favorite search engine to download and install third party video editing program to remove audio from video files and add audio you want.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• How layering audio clip interview on other video clips?

  Help! I have some interview clips and want to ask over the audio from one of the interviews on different music videos. For example, I see the video and audio of the interview and then cut to a clip or a scene showing what is talking about the guy but still have the interviewees audio playing as a voice on the fastener of the flayed. How can I do?

  Welcome to the forum.

  Is this Audio Multiplex (combined in a Clip w / both Audio & video), or is it only separate Audio file, which has been imported into your project?

  If the latter, just drag an Instance of it to an Audio track free and position, as is required. Note: each Instance of an item can have different in and out Poiints, you are not limited to them being the same.

  In the first case, the multiplex, there are two ways to do it, but possibly the easiest is to Alt-click on the Audio portion of the Clip (temporarily separates the Audio & video), and Ctrl + C (copy), then move the CTI (current time indicator/reading head) at the end of the timeline and then press Ctrl + V (paste), for as many Instances of the Audio that you need. Then, drag them to a blank Audio track, all holding the key Ctrl pressed for an Edit to insert, rather than a ripple edit, in order not to touch anything on this track, below the desired video Clip. If you replace the Audio.

  Another way to do that is to use a Ripper Audio audio editing software, save as a WAV/PCM @ file 16-bit 48 kHz, and then import them into the project, for use in many cases.

  Good luck and hope that helps.

  Hunt

• Helps editing of video clips in imovie

  Have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.  Helps editing of video clips in imovie

  < re-titled by host >

  have an imported video but trying to edit and cut the clips that I am only able to select the full video to put down in my film, not just the clip I want to choose.

  This is a new and improved feature in iMovie. You must hold down the 'R' key while clicking on the part of the item you want.  By default, the full clip will be added to the time line.

  See notes to iMovie version 10.1.2:

  

• How to open the H.265 duplicator of Blackmagic design video clips

  How to open the H.265 duplicator of Blackmagic design video clips.

  You could try VLC.

  If you mean for editing then unfortunately Apple is very, very backward these days in terms of codec support. You will probably need to look at Adobe first place.

  Its a bit of chicken and eggs at the moment, we do not know if the reason for Final Cut Pro X is neglected is because the Mac Pro has not been upgraded, or have Apple decided to abandon the Mac Pro, because they are more interested in market Pro at all.

• Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

  Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

  I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

  I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!

• I deleted 2 video clips in my trash and empty, is there a possibility of recovery? Or have I lost this data?...

  I deleted 2 video clips (produced from webcam), trash & emptied the Recycle Bin. can I get back them?

  Note a backup has been performed before the 2 video clips being produced (and combined in 1 clip, using a video editing program) & after trash realization had been emptied

  Hello

  It is very good free program to try to recover these files.

  http://www.Piriform.com/Recuva

  But the more you use this machine, the risk that these files will be overwrittien.

  Whenever a file is deleted from a hard drive, it is not cleared. What is deleted is the little information that points to the location of the file on the hard drive.

  See you soon.

• Can I change several non-contiguous single video clip segments and the remaining segments together in a functional element?

  I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

  Windows XP

  Movie Maker 5.1 (2.1.4028.0)

  I have a second video clip 90 I want to reduce to 50 seconds by removing 10 seconds at the beginning, 5 seconds to end & 25 seconds on average. This means that I use two non-contiguous segments in the middle. The use of 'The Start Trim Point value' a second time eliminates the segment previously created with this command. Is there a way to create the first segment, save it, create the second segment, save it, and then combine the two?

  Windows XP

  Movie Maker 5.1 (2.1.4028.0)

  ============================================
  The cartel command only works if the video has been imported
  in segments (this only happens when "create Clips for video
  Files are checked in the import screen.) or if the files are divided
  in the timeline with no editing. If the files are changed or re -.
  organized the handset command will not work.

  You can save segments individually if all other files are
  removed from the timeline. The original file must be
  adding to the timeline and edited for each successive change and
  record.

  Easy solution... you can combine edited clips by registering the
  the project in the. WMV format. The result will be a single. WMV
  video file.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Personally, I prefer to split video files and remove the
  unwanted part instead of use the trim option.

  "Split a Clip in MM2.1.

  Drag the video/audio clip to the
  Timeline.

  Read the video/audio by clicking on the
  "Play" button under the display screen.

  You will see the playback indicator
  (vertical line), advancing through the
  timeline.

  Click on the button "Pause" to the point
  where you want to split and type...
  CTRL + L or click the "Split" button to the
  at the bottom of the display screen.
  (you can also make adjustments to)
  Drag the playback indicator)

  Make splits as much as you want and
  remove unwanted in law clips
  Click on / delete.

• Windows Movie Maker-how insert a picture in a video clip

  Inserting images in video clips

  With movie maker, is it possible to insert an image in a music video without the audio from the video clip stop. Basically I have a video of people talking. I want to keep the audion running and superimpose a picure in the video.

  Inserting images in video clips

  With movie maker, is it possible to insert an image in a music video without the audio from the video clip stop. Basically I have a video of people talking. I want to keep the audion running and superimpose a picure in the video.

  ===================================================
  For the timeline, drag a second copy of the video on the audio / music and
  send her to the left or right to align on the Audio track. Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete a section...
  Then, insert a Photo and give it the same duration as the segment that you deleted.

  Here's another method:

  Split your video clip on each side of the area where will be the stills. Now... drag
  the part cut on the audio / music. BTW... If you want to add a second 5 again...
  Remove 5 seconds of the video clip. (info below on the separation if you need)

  Drag your pictures still to the time line and drop them to the location where you
  deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to adjust it to
  position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line) to move forward on the scenario.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.