Combine all the video clips in a new clip

Similar Questions

• Is there a way to clear all event listeners, to stop all the video clips, etc.?

  Is there a syntax for that?

  I have a movie that has 15 images. Each image has integrated video clips in video clips, tons of entertainment and event listeners. None is needed except when they are on the scene, on the frame. However, the animations continue even when the frame is left.

  For example, I have a framework that shows a rendered animation dynamically the leaves that fall from the tree. When the frame is left, the leaves continue to decline.

  There are many cases of this kind of thing happens.

  
  Ideally, I'd like to just be able to erase everything when a new image is loaded, since no animations or postponed event from one image to the other listeners.

  
  Is it possible to do it without the thousands of lines of code it would take to manually remove all single animation and event listener and sounds, etc., of the scene?

  Thank you very much!

  Amber

  You must do it manually.

  or, you can convert each image into a swf file.  load each swf when necessary and, if you're publishing to fp 10 +, you can apply unloadAndStop() to kill all the flows in the SWF loaded and ready these assets to gc.

• load all the video clips

  Hello

  I have a clip of "map_mc" which has more than 500 film clips (counties). I also have the countynames in xml format.  I want to be able to

  1. in a loop, a list of all the clips

  2 and in a dynamic text box the name of the region for the clip (from xml).

  Is it possible to get the names of all the clips, and then assign the countynames?

  I have semi part xml work and mouseover can display the name but is stuck on the part of movie clip.

  I try to avoid typing all the county names, and in the future we will add Census and other data to the xml document.

  can anyone help?

  If you had an xmlList of 500 countynames, and if the 500 movieclips inside the maps_mc each had names like mc0, mc1, mc2, etc., you could loop through them like this:

  //

  for (var i = 0; i)< xmllist.length();="">

  refer to the County of movieclip

  MC var = maps_mc.getChildByName ("mc" + i);

  then add listeners

  mc.addEventListener (MouseEvent.ROLL_OVER, overMe);

  mc.addEventListener (MouseEvent.ROLL_OUT, outMe);

  }

  //

  function overMe(e:MouseEvent) {}

  You County overturned

  MC var = e.target;

  Gets the number of the name

  var n = Number (mc.name.substr (2));

  Use n for xmlList countyname

  var countyname = xmlList [n];

  trace (COUNTYNAME);

  now add countyname to a textField

  textField.text = countryname;

  }

  function outMe(e:MouseEvent) {}

  Clear the textField

  textField.text = "";

  }

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• All my video clips display a generic logo in thumbnail view when they used to show an image of the film.

  HI - all my video clips (avi) show with a generic logo on the view thumbnails - when they used to show a frame of the video image.  Do you know how can I restore this view?

  original title: thumbnails

  Well I don't know how it works - but I just moved my videos folder in the "My videos" folder and all the icons appear as images!  I don't think that these files have different properties do?  Weird - but there you go.  They work very well in my photos, but not in my documents...

• Why is - all the individual clips in the order settles instead of simply the sequence?

  Whenever I create a project in Adobe premiere pro CC14 I first see my project calendar, and then I create new sequences as Intro, Montage and credits.

  In each sequence I assembled the clips, edit and cut etc. Finally I place all the sequnces on project timeline in order I would like to and finish my video.

  Today, something had changed for me. When you try to move a sequence in the timeline of the project he moved ALL the individual clips in the sequence.
  I want the sequence to look like a single element in the timeline of the project. Hope this will make sence.

  I don't know for someone with experience, it is an easy solution, but for me, I'm afraid that's not. Can someone explain to me what I have to do? I want to understand what happened.

  Grateful for any help I can get.

  Click on the left most icon under the sequence timecode.  Who determines if sequences come in a nest, or as the original clips.

• Cut a combined EPA 11 video Clips

  Cut a combined EPA 11 video Clips

  EPA 11... I have an interview that was taken with both cameras. Now I want to combine them into a single program. I stacked video 1 and video 2. They are now synchronized and grouped. I want to cut various section during the interview. When to use the scissors to cut the video leaves everything else together. I have a cut line, but he won't come out. It just all stays together.

  Is there anything better than a group, taking on sections 1 & 2 video and re group?

  Thank you.  Peace and long live! Phil

  Thank you to. It's basically what I do. What I was trying to do is first remove the video 1 and 2 sections I want any. So like you I noticed a link the two. Cut the top of the video2 page where I want to drag to the bottom of the yellow lind, so I can see video 1. And repeat as a manager was shouting cameras. I thought it might be a better way, but as you noted he does not exist.

  Thank you for your help and your quick response.  I insist to create another video of "large". :-)

  Cheeers and peace! Phil

• Audio grip on all the videos played in firefox after updating to 3.6, everything works fine in internet explore.

  sound blocking and rehearsals while playing videos, his curriculum vitae as it should after a second or two, happens once every few seconds while playing any video in firefox. flash (youtube) applications work fine. Internet Explore runs all the videos very well. Let me know if I need to dig a bit more information to help understand what my being at the origin of the problem.

  This has happened

  Each time Firefox opened

  == update to firefox 3.6

  The package of K-Lite Audio codec available in free - codecs.com has completely solved the problem of audio studdering I met in the new version of firefox.

• Discoloration video, but not out in the video clip.

  Hello.

  I need to run a video that I can turn over any other flash content.

  Since I also have to add sub titles, I decided to import the video clip into a clip. The clip now has as many frames as the video.

  I added subtitles to keyframing a line of text in the video and synchronized it upward with the film. (it was not really easy...)

  I placed an instance of the clip on my main stage in frame 10. I added an on and and STOP simply would take you to a framework later without the movie clip instance and return to frame 10 once again if you want to see the video again. It worked well.

  To book the elegant transistions I wanted to fade video in and out. So on the main stage in the frame of 10 I placed this action script:

  (+ gave my movieclip the instance name mc)

  Stop();

  Import mx.transitions.Tween;

  Import mx.transitions.easing. *;

  var myTween:Tween = new Tween (mc, "_alpha", Strong.easeIn, 0, 100, 2, true);

  well which mitigates the video when the playback head to frame 10.

  There is another part of the script that should be able to tell the end next to the clip and it melted:

  myTween.onMotionFinished = function () {}

  new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

  }

  This however, I can't work:

  (1) if I place this code in the frame of 10, the video goes first but immideately faints again.

  (2) I tried to put 15 images of code at the end of the clip, and that did not work.

  (3) I tried to put 15 images of code at the end of the clip and add _parent.  and who does not.

  It is possible to work and if so, how?

  If this isn't the case, please let me know if you have any other approach proven to suggest.

  ggaarde

  If the first interpolation works in the timeline panel, and then in the same timeline in frame of whattever close to the end you just create another interpolation there.

  myTween = new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• First pro does not control the properties of the video clip to match the sequence

  Hello

  I have a sequence in my calendar set at 1920 x 1080 and based on my understanding of the video clips, I place in the timeline should automatically be adjusted in cadence, resolution etc. I looked in my settings to see if an option to do this automatically has been disabled, but can not find it and the timeline is always insert Staples into their native format 1280 x 720. can you tell me what I am doing wrong? You can see in the screenshot that the video is narrowed down, thank you!

  

  This dialog box appears only when you place a clip in an empty sequence. This is to help you create a sequence quickly that meets (or not) your footage.

  To do what you want, go to your Pro first preferences > general and select the check box for the default scale to the size of the image.

  Click OK.

  MtD

• Premiere Pro is not read all the video content in my AVCHD video. I know this because my computer plays all content through the Preview, so that the information is on the card. How the first to read all the content?

  Premiere Pro is not read all the video content in my AVCHD video. I know this because my computer plays all content through the Preview, so that the information is on the card. How the first to read all the content?

  The first thing to do is to copy all the contents of your memory card to your computer and then import them into the body using the media browser in the body. Does it work?

• The use of eligible margins in the video Clips, PE11

  1. Is it possible to manually resize a video in first 11 items so that it fits within the margin of safety?  If yes how can I do this?
  2. Also, is it possible to get rid of the side black bars of video clips in PE!  If yes how how to do this?

  Thank you

  Andrew-dd_1937

  What operating system executes your 11 items first?

  1. with the margins of safety on the Edit box monitor and the video clip selected, scaling the image on the screen to fit the area of interest.

  The scale can be done by clicking on the screen to bring up the bounding box of the image, then by dragging on one of the handles of the limit

  box for scale.

  Tip: Depending on the specifications of your TV, you can change the margins of safety to target edit them project Menu/Settings/general

  Title safe area

  Safe action area

  Also, in applied tab/Applied effects Palette/Motion extended effect controls panel, you can uncheck the option constrain Proportion so that

  You can measure the width and height separately.

  
  

  The scale is also possible by selecting the clip of chronology and then using the slider scale found applied effects tab/Applied effects Palette/Motion

  Expanded panel and its properties of scale.

  When you see these black border in Premiere Elements...?

  When you first slide your import to workspace Expert chronology or somewhere else. If export, then you (manually) or the project

  (automatically) have not set the correct project preset to match the properties of the source media. Thus, more information about what is

  happening here.

  Please let me know if I interpreted your question correctly. If this isn't the case, please more details.

  Thank you.

  RTA

• Removal of the video clips in arrays

  Hello

  I have this code in my Flash file:

  for(bubble in bubbleArray){
       bubbleArray[bubble]._y -= 3;
       if(bubbleArray[bubble]._y < 370){
            bubbleArray[bubble].removeMovieClip();
       }
  }

  I wonder, when I remove the film clips should I also be burst their table?

  I have an onEnterFrame function that attaches the video clips and the drives in the array, so I'm afraid that if I don't pop the table will continue to increase in size and slow down the film. This is the case, or will they be automatically removed from the table by the above removeMovieClip() method?

  They will not be removed from the table, but the table can now point to an undefined object.  So if the intention is not to try to deal with in this code, then you must delete them from the table.

• Set the video clip

  Hello I have asked that my topic to another, but this subject was mainly related to another problem.
  
  My question is;
  
  I have 3 x 3 squares square ("box_mc" s movie clip duplicated from 1 film clip "box" on stage)
  
  I want to put a small box (it's the video clip "smallmc") in front of cotyledon (which is one of the other mc "box_mc" already placed on stage). When I click on the big box (I mean "box_mc"), I would like to join an instance of "smallmc" in front of a large.
  
  I have this code in the 'box' mc;
  on {(press)
  If (this.selected == 0) {}
  trace ("checked");
  selected = 1;
  _root.attachMovie ("smallmc", "smallmc" + count, getNextHighestDepth (), {_x: this ._x, FLF: this ._y});
  _root. Count ++;
  trace (_root. (Count);
  } else {}
  trace ("Unselected");
  selected = 0;
  _root. -Count;
  trace (_root. (Count);
  }
  }
  
  but this code puts "smallmc" under "boxmc": ((et 1 plus de problème;))
  
  I have 3 x 3 boxes big; and when I click on a "boxmc" he puts 1 smallmc then I click on another 'boxmc' is 'smallmc' but a previous dissappearing. (but this isn't prior problem I think first I should put small boxes in front of the biggest)
  
  Thank you for your help tips
  

  Don't know if this will help but: getNextHighestDepth() is not autonomous
  method - it is a method of a MovieClip. You need something like:
  this.getNextHighestDepth () instead.

  --
  Dave-
  Adobe Community Expert
  www.blurredistinction.com
  http://www.Adobe.com/communities/experts/